Sheet Metal Notcher SN-V04-MS
Made in Taiwan
Ever have odd angles that you need to notch out of sheet metal, something that will look totally whack when finished if not done right? Enter the SN-V04-MS; this great machine is a 220 volt three phase hydraulic sheet metal notcher. This notcher will cut notches from 30 to 140 degrees in mild steel up to 6mm in thickness and will do this at up to 15 strokes per minute.
The oversized 27 x 23.5 inch table includes table guides and miter blocks to ensure accurate notches every time. The SN-V04-MS sheet metal notcher has 8.5 inch long blades that are negatively raked to pull the material to the stops during the cut. The blades can also be resharpened many times for even more life and cost savings.
Blade gap is adjusted with the use of hand wheels and the notching stroke is controlled by a foot pedal. For more information on the SN-V04-MS variable angle notcher contact a representative.
|Country of Manufacture||Taiwan|
|Table Size||27 x 23.5 inch|
|Table Dimensions||37.4 x 31 inch|
|Notch Angle||30 - 140 degrees Variable|
|Strokes Per Minute||15|
|Blade Gap Adjustment||Manual|
|Max. Capacity||.237 inch|
|Max. Capacity Mild Steel (SS capacity with optional blades)||4 ga. (7 ga.)|
|Power||220V / 3-phase|
|Shipping Weight||1,100 lbs.|
|Shipping Dimensions||60 x 44 x 68 inch|
|Max Notch Dimensions||8-1/2 x 8-1/2 inch|
BROTHER-IN-LAW SPECIAL - PRICE REFLECTS OVERSTOCK LIMITED QUANTITY OFFER, CALL NOW TO CHECK AVAILABILITY