Technical Sales 1–800–458–3687

Baileigh Vertical Milling Machines

VM-626-1 110V 1.5HP 9 SPEED VERTICAL TURRET KNEE MILL R8 SPINDLE W/STAND, WORK LIGHT, & 1-SHOT LUBRICATOR 110V VERTICAL MILL, 8 X 36 TABLE, 8 SPEED INCLUDES R8 SPINDLE, COOLANT, LUBRICATOR, WORK LIGHT VM-942E-1 9x42 inch, 220V 1ph, 3hp, 8 speed, Verticle Mill VM-942-1 9x42 inc, 220V, 1ph, 3hp Variable Speed Verticle Mill VM-949E-VS 9x49 inch, 220V, 1ph, 3hp Variable Speed Verticle Mill
VM-626-1 6x26 inch, 110V 1.5hp, 9 Speed Verticle Mill VM-836E 8x36 inch, 110V, 2hp 8 speed, Verticle Mill VM-942E-1 9x42 inch, 220V 1ph, 3hp, 8 speed,
Verticle Mill
VM-942-1 9x42 inc, 220V, 1ph, 3hp Variable Speed Verticle Mill VM-949E-VS 9x49 inch,  220V, 1ph, 3hp Variable Speed Verticle Mill
VM-949-1 9x49 inch, 220V, 1ph, 3hp Variable Speed Verticle Mill VM-949-3 9x49 inch, 220V, 3ph, 3hp Variable Speed Verticle Mill VM-1054E-VS 10x54 inch, 220V, 3ph, 3hp, Variable Speed Verticle Mill VM-1054-3 10x54 inch, 220V, 3ph, 3hp, Variable Speed Verticle Mill VM-1258-3 12x58 inch, 220V, 3ph, 5hp, Variable Speed Verticle Mill
VM-949-1 9x49 inch,  220V, 1ph, 3hp Variable Speed Verticle Mill VM-949-3 9x49 inch,  220V, 3ph, 3hp Variable Speed Verticle Mill VM-1054E-VS 10x54 inch, 220V, 3ph, 3hp, Variable Speed Verticle Mill VM-1054-3 10x54 inch, 220V, 3ph, 3hp, Variable Speed Verticle Mill VM-1258-3 12x58 inch, 220V, 3ph, 5hp, Variable Speed Verticle Mill

 

VERTICAL MILL - VM-626-1

Vertical Mill VM-626-1

Perfect for the small shop or even a garage at your house. The VM-626-1 vertical mill from Baileigh Industrial is the best choice mill for anyone just getting into machining. This is a small but powerful machine that can handle just about any job you can throw at it. The VM-626-1 has an 6 x 26 inch working table and operates on 110 volt power.

The VM-626-1uses a step pulley system that allows adjustment to the speed from 230 to 2500 rpm. Being able to tune the speed of the quill is important to prolong the life of the tooling and saving money. An R8 spindle is standard and having an R8 allows a wide variety of tooling that is readily available in just about any tooling store.

Features:

  • 6 x 26 inch work table
  • Compact size
  • R8 spindle
  • Perfect for milling, drilling, tapping, boring, and reaming
  • Headstock can tilt 90 degree
  • 9 speeds
  • 110V

Contact a representative today to find out more about the VM- 626-1 vertical milling machine from Baileigh industrial

Specifications
Item Number VM-626-1
Spindle Taper R8
Working Table Size 26 x 6 inch
Working Table Travel (X/Y) 14.5 / 6 inch
Spindle Nose to Worktable 13.75 inch
Spindle Speed Range 230 to 2500 rpm
Speeds 9
Motor 1.5 hp
Shipping Weight 575 lbs.
Shipping Dimensions 45 x 38 x 88 inch
specifications subject to change without notice

 

110V VERTICAL MILL, 8 X 36 TABLE, 8 SPEED INCLUDES R8 SPINDLE, COOLANT, LUBRICATOR, WORK LIGHT

VERTICAL MILL VM-836E

The VM-836E vertical mill from Baileigh Industrial is the perfect mill for anyone just getting into machining. This small but powerful machine is based off of our popular VM-936E mill and offers many of the same features for a fraction of the cost. The VM-836E has an 8 x 36 inch working table and operates on 110 volt power making it perfect for any environment.

The VM-836E uses a step pulley system that allows adjustment to the speed from 240 to 1550 rpm. Being able to tune the speed of the quill is important to prolong the life of the tooling and saving money. An R8 spindle is standard and having an R8 allows a wide variety of tooling that is readily available in just about any tooling store.

Features:

  • 8 x 36 inch work table
  • Compact size
  • R8 spindle
  • Perfect for milling, drilling, tapping, boring, and reaming
  • Headstock can tilt 90 degree
  • 5 speeds
  • 110V

Contact a representative today to find out more about the VM-836E vertical milling machine from Baileigh industrial

Specifications
Item Number VM-836E
Drilling Capacity 1.75 inch
Milling Capacity 3.14 inch
Spindle Taper R8
Working Table Size 31.5 x 9.4 inch
Working Table Travel (X/Y) 22.4 / 9 inch
Spindle Nose to Worktable 14.5 inch
Spindle Center to Column 11.2 inch
Speeds 240, 380, 610, 970, 1550 RPM
Motor 2 hp
Shipping Weight 1,672 lbs.
Shipping Dimensions 45 x 38 x 88 inch
specifications subject to change without notice

 

VERTICAL KNEE MILL - VM-942E-1

VERTICAL KNEE MILL - VM-942E-1

Baileigh Industrial has a line of vertical milling machines to meet any shops requirements, whether it is price, size, or power. The VM-942E-1 vertical milling machine fits into the price category, but that does not mean that it doesn’t have features to back it up and make it a great value.

The VM-942 is an 8 speed milling machine that allows speed adjustments from 60 to 2760 rpm. Being able to fine tune the speed of the quill is important in prolonging tooling life and saving money. Speaking of the quill or spindle Baileigh Industrial has specified a R8 spindle taper for the VM-942E-1.

The R8 taper is the most common taper in the industry making tooling easy to source.

The VM-942E-1 has a powerful 3 hp motor that runs on 220 volt single phase power and features a two axis digital read out. Other standard features of the VM-942 milling machine include a, coolant system dovetail slide ways, way covers, and halogen wok light.

To learn more about the VM-942E-1 vertical milling machine see the specifications chart or call a sales representative

Specifications
Item Number VM-942E-1
Spindle Speeds 8
Spindle Travel 5 inch
Spindle Speed Range 80, 140, 230, 350, 650, 1100, 1800, 2760 RPM
T-Slot Width 5/8 inch
Table Size 42 x 9 inch
Spindle Center To Column Min Max 0 - 12 inch
Spindle Diameter 3-11/32 inch
Spindle Feed Per Rev 0.0015 / 0.003 / 0.006 inch
Spindle Head Swivel 45 deg (F and R) 90 deg (R and L)
Motor Spindle 3 hp
Travel Auto X Axis 25-1/4 inch
Travel Auto Y Axis 12-1/8 inch
Travel Auto Z Axis 14-5/8 inch
Spindle Nose To Table Min Max 2-3/8 - 17 inch
Spindle Taper R8
Table Load Capacity 770 lbs.
Motor Coolant 1/8 hp
Cross Travel Of Ram 13-1/2 inch
Power 220V / 1-phase
Shipping Weight 2,100 lbs.
Shipping Dimensions 60 x 60 x 83 inch
specifications subject to change without notice

Vertical Milling Machine VM-942-1

Vertical Milling Machine VM-942-1

Made in Taiwan

Baileigh Industrial has a line of vertical milling machines to meet any shops requirements, whether it is price, size, or power.  The VM-942 vertical milling machine fits into the price category, but that does not mean that it doesnt have features to back it up and make it a great value.

The VM-942 is a fully variable speed milling machine that allows infinite adjustment to the speed from 60 to 4200 rpm.  Being able to fine tune the speed of the quill is important in prolonging tooling life and saving money.  Speaking of the quill or spindle Baileigh Industrial has specified a NST-40 spindle taper for the VM-942.  The larger taper helps eliminate chatter and run out during the cutting process and make better cuts.

The VM-942 has a powerful 3 hp motor that runs on 220 volt single phase power and features a three axis digital read out.  All three axis of the VM-942 are powered making this an operators dream to run.  Other standard features of the VM-942 milling machine include a, coolant system with catch tray, square slide ways, way covers and halogen wok light.

To learn more about the VM-942 vertical milling machine see the specifications chart or call a sales representative.

Specifications
Model VM-942-1
Spindle Center To Column Min Max 0 - 12 inch
Spindle Diameter 3.37 inch
Spindle Feed Per Rev .0015/.003/.006 inch
Spindle Head Swivel (deg) 45 (F and R) 90 (R and L)
Motor Spindle 3 hp
Travel Auto X Axis 28.5 inch
Travel Auto Y Axis 12 inch
Travel Auto Z Axis 16 inch
Travel Manual X Axis 30 inch
Travel Manual Y Axis 12 inch
Travel Manual Z Axis 16 inch
Spindle Nose To Table Min Max 0 - 16 inch
Spindle Speed 70 - 4200 rpm
Spindle Taper NST 40
Table Size 42 x 9 inch
Table Load Capacity 770 lbs.
T Slots .625 inch
Motor Coolant 1/8 hp
Cross Travel Of Ram 12 inch
Power 220V / 1-phase
Shipping Weight 2,200 lbs.
Spindle Travel 5 inch
Shipping Dimensions 60 x 60 x 75 inch

specifications subject to change without notice

VERTICAL MILL VM-949EVS

Verticle Mill VM-949E-VS
Looking to take the next step from a mill-drill or step pulley mill? Take a look at the Baileigh Industrial VM-949E-VS. This 9x49 workhorse is outfitted with a 3HP continuous duty motor requiring only 220V single phase power, making it perfect for hobbyists, small shops, and professionals alike. This knee mill has a familiar old-school feel, while having many creature comforts not typically found in this market range.

Features and Standard Accessories include:

  • Variable spindle speed by adjustable sheaves/pulleys - Control spindle RPM with the turn of a handle
  • Infinitely adjustable variable speed from 60 to 4,200rpm Allows tooling to run at its intended speed, resulted in longer tool life and better finishes
  • R8 spindle and drawbar - Accepts the most common tooling
  • Meehanite Casting  Rigid and dependable for decades of use
  • Spindle brake  Easier tool changes and quick spindle stops 3 speed power quill feed w/ manual wheel  Perfect for boring and accurate, consistent work
  • DRO for X and Y axes
  • Power feed X axis w/ rapid – Consistent travel speed without tiresome cranking
  • Dovetail ways w/ adjustable gibs – Keep tolerances tight year after year
  • Taiwan lead screws w/ backlash adjustable nuts – Remove backlash instead of compensating for it
  • Way covers and wipers, Keep chips off ways and bed
  • Integrated coolant system w/ splash guard  Large 6 gallon reservoir in the base houses the pump. Plumbed return line from the table eliminates overflow and messes
  • LED work light
  • One-shot lubricator  Keep up on lubrication maintenance by simply pulling a lever
  • To learn more about the Baileigh Industrial VM-949E-VS vertical knee mill, please call one of many knowledgeable sales representatives
Specifications
Model VM-949E-VS
Spindle Speeds 60 - 4,200RPM Infinitely Variable
Distance from Spindle to Table 18.5 inch
Spindle Travel 4.9 inch
Spindle Speed Range 60 to 4200 RPM
Spindle Feeds 0.003, 0.0015, 0.008 inch
Power Feed X axis
Table Size 9 x 49 inch
Range of Movement 90 deg Left and Right, 45 deg Front and Back
Spindle Diameter 3.3 inch
Motor 3 hp
X Axis Travel 31-5/8 inch
Y Axis Travel 11-3/16 inch
Z Axis Travel 13-3/4 inch
Spindle Taper R8
T Slots 0.625 inch
Power 220V / 1-phase
Shipping Weight 1820 Lbs.
Drill Capacity 2 inch
Shipping Dimensions 49 x 44 x 84 inch
specifications subject to change without notice
 

Milling Machine VM-949-1

Milling Machine VM-949-1

Made in Taiwan

When looking for a conventional style knee milling machine, Baileigh Industrial leads the pack in both quality and standard features.  Baileigh Industrials VM-949 milling machine is no exception and is great for any small to medium machine shop or fabrication shop.  Like all Baileigh machines, it's packed with tons of standard features that are options on most other brands.

The VM-949 is fully variable speed through the use of a Yaskawa inverter drives.  Speeds are adjustable from 0 to 4200 rpm.  Adjustable spindle speeds help prolong tooling life as well as allows some applications that cannot be done on a standard drill press, such as thermal friction drilling.  The VM-949 is available in two different voltages, 220 volt single and three phase, these variances allow the VM-949 to be used in almost any shop.

Rigidity is also very important on a mill that is why Baileigh Industrial went with only the best castings to make the base and frame work out of.  The stronger you make he platform the better the cutting is.  This is not the place to use an inferior process.  To make the VM-949 milling machine even stronger, a NST 40 spindle is standard.  This type spindle is stronger and give the operator a choice of larger tooling should the need arise.

Operation of the VM-949 could not be easier as this milling machine has powered X, Y and Z axis.  The X and Y axis utilizes a Mitutoyo DRO- digital read out for positioning down to 1/10 of a thousandth of an inch.  Other standard features of the VM-949 milling machine include an air draw bar, coolant system with catch tray, square slide ways and X and Y axis ball screws.

To learn more about the VM-949 vertical milling machine see the specifications chart or call a sales representative.

Specifications
Model VM-949-1
Spindle Center To Column Min Max 8.38 - 20.98 inch
Spindle Diameter 3.37 inch
Spindle Feed Per Rev .0015/.003/.005 inch
Spindle Head Swivel (deg) 45 (F and R) 90 (R and L)
Motor Spindle 3 hp
Travel Auto X Axis 25.19 inch
Travel Auto Y Axis 12 inch
Travel Auto Z Axis 16 inch
Travel Manual X Axis 28.5 inch
Travel Manual Y Axis 12 inch
Travel Manual Z Axis 16 inch
Spindle Nose To Table Min Max 2.24 - 18.22 inch
Spindle Speed 60 - 4200 rpm
Spindle Taper NST 40
Table Size 49 x 9 inch
Table Load Capacity 440 lbs.
T Slots .625 inch
Motor Coolant 1/8 hp
Cross Travel Of Ram 12.59 inch
Power 220V / 1-phase
Shipping Weight 2,200 lbs.
Spindle Travel 5 inch
Shipping Dimensions 60 x 60 x 83 inch
specifications subject to change without notice
 
 
 

Milling Machine VM-949-1

Vertical Milling Machine - VM-949-3

Made in Taiwan

When looking for a conventional style knee milling machine, Baileigh Industrial leads the pack in both quality and standard features.  Baileigh Industrials VM-949 milling machine is no exception and is great for any small to medium machine shop or fabrication shop.  Like all Baileigh machines, it's packed with tons of standard features that are options on most other brands.

The VM-949 is fully variable speed through the use of a Yaskawa inverter drives.  Speeds are adjustable from 0 to 4200 rpm.  Adjustable spindle speeds help prolong tooling life as well as allows some applications that cannot be done on a standard drill press, such as thermal friction drilling.  The VM-949 is available in two different voltages, 220 volt single and three phase, these variances allow the VM-949 to be used in almost any shop.

Rigidity is also very important on a mill that is why Baileigh Industrial went with only the best castings to make the base and frame work out of.  The stronger you make he platform the better the cutting is.  This is not the place to use an inferior process.  To make the VM-949 milling machine even stronger, a NST 40 spindle is standard.  This type spindle is stronger and give the operator a choice of larger tooling should the need arise.

Operation of the VM-949 could not be easier as this milling machine has powered X, Y and Z axis.  The X and Y axis utilizes a Mitutoyo DRO- digital read out for positioning down to 1/10 of a thousandth of an inch.  Other standard features of the VM-949 milling machine include an air draw bar, coolant system with catch tray, square slide ways and X and Y axis ball screws.

To learn more about the VM-949 vertical milling machine see the specifications chart or call a sales representative.

Specifications
Model VM-949-3
Spindle Center To Column Min Max 8.38 inch
Spindle Diameter 3.37 inch
Spindle Feed Per Rev .0015/.003/.005 inch
Spindle Head Swivel 45
Motor Spindle 3 hp
Travel Auto X Axis 25.19 inch
Travel Auto Y Axis 12 inch
Travel Auto Z Axis 16 inch
Travel Manual X Axis 28.5 inch
Travel Manual Y Axis 12 inch
Travel Manual Z Axis 16 inch
Spindle Nose To Table Min Max 2.24 inch
Table Load Capacity 440 lbs.
T Slots .625 inch
Cross Travel Of Ram 12.59 inch
Power 220V / 3-phase
Shipping Weight 2,200 lbs.
Spindle Travel 5 inch
Shipping Dimensions 60 x 60 x 83 inch

 

 

 
 

 

Vertical Mill VM-1054-3

Vertical Mill VM-1054-3

Made in Taiwan

Table size is very important when deciding which milling machine to buy.  The VM-1054 from Baileigh Industrial has a 10 x 54 inch table that has been hardened, ground, polished, and coated with a special coating called Turcite B to extend life and help to eliminate corrosion.

The VM-1054 is a variable speed milling machine that is powered by Yaskawa inverter.  This inverter is powered by 220 volts of three phase power.  Inverters are great for milling machines because of their ability to be adjusted to any speed desired between 0 and 3800 rpm.  By selecting the right speed tooling life is lengthened and cut quality improves, both of which saves money.  Baileigh Industrial selected an NST 40 taper for its spindle to help improve performance as well.  A larger spindle is stronger and has tighter tolerances over a longer period of time.  Rigidity is also very important on a mill that is why Baileigh Industrial went with only the best castings to make the base and frame work out of.  The stronger you make he platform the better the cutting is.

Specifications
Model VM-1054-3
Spindle Center To Column Min Max 7.87 - 26.77 inch
Spindle Diameter 3.93 inch
Spindle Feed Per Rev .0015/.003/.005 inch
Spindle Head Swivel (deg) 45 (F and R) 90 (R and L)
Motor Spindle 3 hp
Travel Auto X Axis 32.25 inch
Travel Auto Y Axis 15.75 inch
Travel Auto Z Axis 16 inch
Travel Manual X Axis 35.43 inch
Travel Manual Y Axis 15.75 inch
Travel Manual Z Axis 16 inch
Spindle Nose To Table Min Max 1.57 - 17.55 inch
Spindle Speed 80 - 3800 rpm
Spindle Taper NST 40
Table Size 54 x 10 inch
Table Load Capacity 550 lbs.
T Slots .625 inch
Motor Coolant 1/8 hp
Cross Travel Of Ram 18.89 inch
Power 220V / 3-phase
Shipping Weight 3,000 lbs.
Spindle Travel 5 inch
Shipping Dimensions 60 x 60 x 87 in
specifications subject to change without notice
VARIABLE SPEED VERTICAL MILL - VM- 1054E-VS

VARIABLE SPEED VERTICAL MILL - VM- 1054E-VS

The VM-1054E-VS is a variable speed milling machine that runs from 60 to 4,200 rpm. By selecting the right speed tooling life is lengthened and cut quality improves, both of which save money. Baileigh Industrial selected an ISO 40 taper for its spindle to help improve performance as well. A larger spindle is stronger and has tighter tolerances over a longer period of time. Rigidity is also very important on a mill that is why

Baileigh Industrial went with only the best castings to make the base and frame. The stronger you make he platform the better the cutting is. Table size is another very important component when deciding which milling machine to buy and VM-1054E-VS has a 10 x 54 inch table that has been hardened, ground, polished, and coated with a special coating called Turcite B to extend life and help eliminate corrosion.

All three axis are powered on the VM-1054E-VS making it easy on the operator. Another nice feature is the two axis digital readout that comes standard. This digital readout is accurate to 1/10 of 1 thousandth of an inch. A flood coolant system, air draw bar, and central lubrication system are all factory installed on the VM-1054E-VS.

To learn more about the VM-1054E-VS milling machine call a representative today

 
Item Number VM-1054E-VS
Table Size 54 x 10 inch
Spindle Center To Column Min Max 7.87 - 26.77 inch
Spindle Diameter 3.93 inch
Spindle Feed Per Rev 0.0015 / 0.003 / 0.006 inch
Spindle Head Swivel 45 deg (F and R) 90 deg (R and L)
Motor Spindle 3 hp
Travel Auto X Axis 32 inch
Travel Auto Y Axis 13.75 inch
Travel Auto Z Axis 13 inch
Spindle Nose To Table Min Max 4 - 17 inch
Spindle Speed 60 - 4200 rpm
Spindle Taper ISO 40
Table Load Capacity 550 lbs.
T Slots 0.625 inch
Motor Coolant 1/8 hp
Cross Travel Of Ram 20 inch
Power 220V / 3-phase
Shipping Weight 3,000 lbs.
Spindle Travel 5 inch
Shipping Dimensions 60 x 60 x 87 inch
specifications subject to change without notice

 

milling machine

Vertical Mill VM-1258-3

Made in Taiwan

When you need a vertical mill to hold a large job, a small wimpy mill wont do.  You need to step up to the VM-1258 from Baileigh Industrial.  The VM-1258 vertical mill features a whopping 12 x 58 inch table, one of the largest you will find on a manual mill.  This large oversized table isn’t just mounted on a wimpy machine to make it look larger.  The whole machine has been built to reflect the size and weight that its table brings.

In order to build a machine this big, rigidity has to come into the equation.  Baileigh industrial uses only best castings as the starting point for their mills.  The stronger you make he platform the better the cutting is.  From there we selected one of the best spindle packages available, with an NST 40 spindle. A larger spindle is stronger and has tighter tolerances over a longer period of time.  In order to spin a heavy duty spindle like that we decide to go with a Yaskawa inverter powered by a 5hp 220 volt three phase motor.  The inverter lets the operator chose his RPM from 0 to 3800 rpm.  Being able to choose the correct rpm will make for longer lasting tooling and better cuts.

Movement on the three axis are powered to make it easier on the operator.  The X and Y axis also has a Mitutoyo digital read out as a standard feature.  No need to install it yourself, it is already done at the factory.  The X and Y axis also have square slide ways with covers and ball screws for the best movement available.  A flood coolant system, air draw bar, and central lubrication system are all factory installed on the VM-1258.

To learn more about the VM-1258 vertical mill call a representative.

Specifications
Model VM-1258-3
Spindle Center To Column Min Max 5.11 - 21.65 inch
Spindle Diameter 3.93 inch
Spindle Feed Per Rev .0035/.07/.14 inch
Spindle Head Swivel (deg) 45 (F and R) 90 (R and L)
Motor Spindle 5 hp
Travel Auto X Axis 36.22 inch
Travel Auto Y Axis 14.96 inch
Travel Auto Z Axis 17.71 inch
Travel Manual X Axis 36.61 inch
Travel Manual Y Axis 15.74 inch
Travel Manual Z Axis 17.71 inch
Spindle Nose To Table Min Max 1.37 - 19.09 inch
Spindle Speed 80 – 3800 rpm
Spindle Taper NST 40
Table Size 58 x 12 inch
Table Load Capacity 770 lbs.
T Slots .625 inch
Motor Coolant 1/8 hp
Cross Travel Of Ram 16.53 inch
Power 220V / 3-phase
Shipping Weight 3,740 lbs.
Spindle Travel 5.51 inch
Shipping Dimensions 70 x 61 x 91 inch

specifications subject to change without notice

Models
VM-626-1 110V 1.5HP 9 SPEED VERTICAL TURRET KNEE MILL R8 SPINDLE W/STAND, WORK LIGHT, and 1-SHOT LUBRICATOR
VM-836E-1.0 110V VERTICAL MILL, 8 X 36 TABLE, 8 SPEED INCLUDES R8 SPINDLE, COOLANT, LUBRICATOR, WORK LIGHT
VM-942E-1 220V 1PH 3HP VERTICAL MILL, 9X42 TABLE, 8 SPEED, INCLUDES R8 SPINDLE, COOLANT, WORK LIGHT, X&Y DRO
VM-942-1 220V SINGLE PHASE VARIABLE SPEED VERTICAL MILLING MACHINE. 9 X 42 TABLE
VM-949E-VS 220V SINGLE PHASE VARIABLE SPEED VERTICAL MILL, 9 X 49 TABLE, INCLUDES X AXIS POWER FEED AND DRO
VM-949-1 220V 1 PHASE VARIABLE SPEED VERTICAL MILLING MACHINE. 9 X 49 TABLE. YASKAWA VFD
VM-949-3 220V 3 PHASE VARIABLE SPEED VERTICAL MILLING MACHINE. 9 X 49 TABLE. YASKAWA VFD
VM-1054E-VS 220V 3PH VERTICAL MILL, 10 X 54 TABLE, VARIABLE SPEED, ISO40 SPINDLE, COOLANT, POWER FEEDS, DRO
VM-1054-3 220V 3 PH VARIABLE SPEED VERTICAL MILLING MACHINE WITH RIGID HEAD. 10 X 54 TABLE
VM-1258-3 220V 3 PH VARIABLE SPEED VERTICAL MILLING MACHINE WITH RIGID HEAD. 12 X 58 TABLE

 

VM-626-1
BLACK FRIDAY SALE - 110V 1.5HP 9 SPEED VERTICAL TURRET KNEE MILL R8 SPINDLE W/STAND, WORK LIGHT, & 1-SHOT LUBRICATOR
BLACK FRIDAY SALE - PRICE REFLECTS AN ADDITIONAL 15% OFF OUR ALREADY LOW PRICE - SALE ENDS 12/7/2020
Mfg. item #: VM-626-1
BAIVM-626-1
lease to own for as little as:$86 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$4,285.87

0
VM-836E-1.0
110V VERTICAL MILL, 8 X 36 TABLE, 8 SPEED INCLUDES R8 SPINDLE, COOLANT, LUBRICATOR, WORK LIGHT
Mfg. item #: VM-836E-1.0
BAIVM-836E-1.0
lease to own for as little as:$137 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$6,844.39

93
VM-942E-1
BLACK FRIDAY SALE - 220V 1PH 3HP VERTICAL MILL, 9X42 TABLE, 8 SPEED, INCLUDES R8 SPINDLE, COOLANT, WORK LIGHT, X&Y DRO
BLACK FRIDAY SALE - PRICE REFLECTS AN ADDITIONAL 15% OFF OUR ALREADY LOW PRICE - SALE ENDS 12/7/2020
Mfg. item #: VM-942E-1
BAIVM-942E-1
lease to own for as little as:$151 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$7,538.54

0
VM-942-1
BLACK FRIDAY - 220V SINGLE PHASE VARIABLE SPEED VERTICAL MILLING MACHINE. 9 X 42 TABLE.
OVERSTOCK SALE - SUBJECT TO CHANGE ANYTIME - MUST CALL FOR AVAILABILITY AT THIS SPECIAL PRICE ** SALE ENDS 12/7/2020
Mfg. item #: VM-942-1
BAIVM-942-1
lease to own for as little as:$236 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$11,808.46

0
VM-949E-VS
BLACK FRIDAY SALE - 220V 1PH 3HP VERTICAL MILL, 9 X 49 TABLE, VARIABLE SPEED PULLEY SYSTEM, X POWER FEED, DRO
BLACK FRIDAY SALE - PRICE REFLECTS AN ADDITIONAL 15% OFF OUR ALREADY LOW PRICE - SALE ENDS 12/7/2020
Mfg. item #: VM-949E-VS
BAIVM-949E-VS
lease to own for as little as:$187 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$9,357.12

0
VM-949-1
BLACK FRIDAY - 220V 1PHASE VARIABLE SPEED VERTICAL MILLING MACHINE. 9 X 49 TABLE. YASKAWA VFD
OVERSTOCK SALE - SUBJECT TO CHANGE ANYTIME - MUST CALL FOR AVAILABILITY AT THIS SPECIAL PRICE ** SALE ENDS 12/7/2020
Mfg. item #: VM-949-1
BAIVM-949-1
lease to own for as little as:$253 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$12,661.53

0
VM-949-3
BLACK FRIDAY - 220V 3PHASE VARIABLE SPEED VERTICAL MILLING MACHINE. 9 X 49 TABLE. YASKAWA VFD
OVERSTOCK SALE - SUBJECT TO CHANGE ANYTIME - MUST CALL FOR AVAILABILITY AT THIS SPECIAL PRICE ** SALE ENDS 12/7/2020
Mfg. item #: VM-949-3
BAIVM-949-3
lease to own for as little as:$235 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$11,742.84

0
VM-1054E-VS
BLACK FRIDAY SALE - 220V 3PH VERTICAL MILL, 10 X 54 TABLE, VARIABLE SPEED, NT40 SPINDLE, COOLANT, POWER FEEDS, DRO
BLACK FRIDAY SALE - PRICE REFLECTS AN ADDITIONAL 15% OFF OUR ALREADY LOW PRICE - SALE ENDS 12/7/2020
Mfg. item #: VM-1054E-VS
BAIVM-1054E-VS
lease to own for as little as:$234 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$11,676.73

0
VM-1054-3
BLACK FRIDAY SALE - 220V 3PHASE VARIABLE SPEED VERTICAL MILLING MACHINE WITH RIGID HEAD. 10 X 54 TABLE.
BLACK FRIDAY SALE - PRICE REFLECTS AN ADDITIONAL 15% OFF OUR ALREADY LOW PRICE - SALE ENDS 12/7/2020
Mfg. item #: VM-1054-3
BAIVM-1054-3
lease to own for as little as:$379 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$18,966.91

0
VM-1258-3
BLACK FRIDAY - 220V 3PHASE VARIABLE SPEED VERTICAL MILLING MACHINE WITH RIGID HEAD. 12 X 58 TABLE.
OVERSTOCK SALE - SUBJECT TO CHANGE ANYTIME - MUST CALL FOR AVAILABILITY AT THIS SPECIAL PRICE ** SALE ENDS 12/7/2020
Mfg. item #: VM-1258-3
BAIVM-1258-3
lease to own for as little as:$464 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$23,189.78

0
Copyright © 2020 Smith-Hamilton, Inc
0.010 200805 09:16