Baileigh Woodworking Jointers

Wood Jointer IJ-655 

1004928 

Made in Taiwan

If you are looking for a well-made affordable wood jointer, then the IJ-655 is for you.  This 110V 1hp jointer has more than enough power to take care of any job.  The IJ-655 is a 6 inch wide maximum cut jointer features three HSS knives running at 5000rpm that align themselves in the cutter head for rapid knife changes.

The 6x55 inch oversized table is mounted on dovetailed ways and have a built-in rabbeting ledge. The fence is 29 inch in length and 4 inch tall, with positive stops at 90 degree and 45 degree right and left.   Also included is a quick adjustment lever on the in feed table has quick set-ups with controlled maximum 1/8 inch depth of cut.  A 4 inch dust port offers easy connection to any dust collection system.

Long Bed Jointer IJ-666 

1004930 

Made in Taiwan

The IJ-666 is a long bed version of the IJ-655 jointer from Baileigh Industrial.  With an extended table the IJ-666 allows the operator to make truer cuts on longer materials.  Along with the longer table it also includes a larger 4 x 38 inch fence with positive stops at 90 and 45 degrees right and left.

Powered by an 110V 1.5hp motor that spins at 5000 RPM this 6’ long bed  jointer has more than enough power to take care of any job in any size shop.  The IJ-666 can also be wired to run on 220 volt single phase power as well.  The 2.5 inch diameter cutter head has 3 HSS knives with a maximum depth of cut being 1/8 inch.  A 4 inch dust port offers easy connection to any dust collection system.

Jointer IJ-875 

1004931 

Made in Taiwan

A long bed jointer is quickly becoming the go to for most wood workers because of the ease of material handling and improved accuracy.   The IJ-875 from Baileigh Industrial is a great choice for a long bed jointer.  This 220 volt 2hp jointer has more than enough power to power though any job.  The IJ-875 has an 8 inch wide maximum cut with three HSS knives running at 5000rpm that align themselves in the 3-1/4 inch cutter head for rapid knife changes.

The IJ-875 has an 8 x 75 inch oversized table is mounted on dovetailed ways and have a built-in rabbeting ledge. The fence is 4-3/4 x 38 inch with positive stops at 90 and 45 degrees right and left.   Also included is a quick adjustment lever on the in feed table has quick set-ups with controlled maximum 1/8 inch depth of cut.  A 4 inch dust port offers easy connection to any dust collection system.  For More information on this or any other of the Baileigh Industrial jointers contact a representative today.

Long Bed Parallelogram Jointer IJ-883P 

1004933 

Made in Taiwan

If you are looking or the most accuracy in an 8 inch jointer then look no further than the IJ-883P long bed parallelogram jointer from Baileigh Industrial.  It has an extra-long 83 inch bed length for better work support and is equipped a 5-1/2 x 48 inch fence that has positive stops at +/-45 and 90 degrees. A non-mar insert in the fence contacts the table to avoid scratching the surface during adjustments. The parallelogram design keeps the table in close proximity to the cutter head for improved finish and allows for a fast depth of cut adjustment to a maximum of 1/8 inch. This design also insures the table remains perfectly parallel, even after years of use.

The IJ-883P uses a 220volt single phase 2 hp motor to power through even the toughest wood.  Spinning at 5000 RPM the IJ-883P has 3 HSS blades on the 3-1/4 inch diameter cutter head.  Plus, by using 220 volt single phase power this joiner can be used just about anywhere.  A 4 inch dust port is also included.

IJ-1288P-HH - Long Bed Parallelogram Jointer with Helical Cutter Head

Our largest jointer, the IJ-1288P-HH makes your shop safer, thanks to its parallelogram design. The 12” width and 5 hp motor open possibilities by letting you tackle big pieces of lumber.

• Runs on 220-volt single-phase power, so it will work almost anywhere.
• Straight 4-row spiral cutter head (4” diameter) spins at 5,500 rpm.
• Extra-long 88” bed offers better work support for large pieces.
• Built-in rabbeting ledge helps you easily make grooves down the sides of boards for edge joining.
• 6” x 47” fence tilts in and out with stops at 90° and 45° for edge joining.
• Non-mar insert in the fence prevents the table from scratching the surface during adjustments.
• Parallelogram-style table stays close to the cutter and maintains a narrow, consistent gap, regardless of the cut depth.
• With a parallelogram jointer, your shop is less prone to dangerous accidents. You’re less likely to slip a board—or a hand—into the gap!
• This design also improves your finished product and lets you adjust the depth of cut more quickly.
• Table remains perfectly parallel, even after years of use.
• Convenient handwheel lets you adjust the cut depth up to â…›”.
• Digital read out for depth of cut, makes repeating cuts easy.
• 6” dust port connects to your dust collection system for a cleaner work area and more breathable air.
• Covered by a 1-year parts warranty.
• We stock most replacement parts at our Wisconsin headquarters for fast shipping.
• You can count on lifetime technical support by phone from our team experienced woodworkers.

IJ-883P-HH - LONG BED PARALLELOGRAM JOINTER WITH SPIRAL CUTTER HEAD

We built this parallelogram jointer to meet the highest
standards of safety and accuracy. An 83 inch bed and 8 inch width let you easily cut flat surfaces and prepare edges for joining.

• 3 hp motor can handle even the toughest woods.
• Runs on 220-volt single-phase power, so you can use it just about anywhere.
• 4 row helical cutter head spins at 5,000 rpm.
• Extra-long 83 inch bed gives you support when handling large pieces of material.
• Built-in rabbeting ledge helps you easily make grooves down the sides of boards for edge joining.
• 5.5 inch x 48 inch fence has positive stops at 45 deg and 90 deg
• Non-mar insert allows the fence to avoid scratching the table surface during adjustments.
• You can quickly adjust the cut depth up to 1/8 inch by turning a convenient handwheel.
• Parallelogram design moves the table edge in an arc around the cutter head, keeping the gap consistent, no matter the cut depth.
• This style of jointer helps prevent accidents, like tipping a board into the gap between the cutter and the table or getting your hand caught in there.
• Design ensures that the table remains perfectly parallel, even after years of use.
• 4 inch dust port conveniently hooks up to your dust collection system, so your shop stays neat and clean.
• Base includes linear wheels, enabling you to easily move the machine
• Covered by a 1-year parts warranty.
• Replacement parts are usually in stock so we can get them to you quickly.
• We provide lifetime technical support by phone from a team of woodworking experts