Tube and Pipe Bender RDB-250
Made in United States
The RDB-250 tube and pipe bender from Baileigh Industrial is a great addition to any fabrication shop. Powered by 220 volt single phase power, The RDB-250 tube and pipe bender has enough power to bend up to 2-1/2 inch tubing and 2 inch Schedule 40 pipe, making it extremely useful for any chassis or handrail application. Another nice feature of the RDB-250 is that it can bend to 180 degree in at a blistering speed of 9 seconds and can be programmed to bend up to 360 degrees in both left and right directions, great for solid rod applications when teamed up with a universal bend plate.
The RDB-250 makes quick work of complex serpentine bends because of its unique quick release counter die mount and easy to use touch screen controller. The controller on the RDB-250 features an internal memory that can hold 170 programs with 10 bends per program. It also accepts a memory card for unlimited program storage. The RDB-250 can also be used in manual mode for those one off prototypes for witch setting a program is not nessesary. The RDB-250 has a foot pedal control for even more versatility.
Another nice feature of the RDB-250 is that it accepts an index table. An index table is important for keeping a section of bends during a program on the correct plane to achieve the most accurate finished product possible.
The RDB-250 from Baileigh Industrial is the most revolutionary and economical programmable tube and pipe bender on the market for its capacity. To find out more on the RDB-250 tube and pipe bender or any other product that Baileigh industrial sells, please call a customer service representative today.
Specifications | |
---|---|
Models | RDB-250 |
Minimum CLR | .5 inch |
Minimum OD | .25inch |
Mild Steel Solid Rod | 1.25 inch |
Mild Steel Pipe Schedule 40 | 2 inch |
Mild Steel Round Tube Wall | 2.5 inch (.125) |
Mild Steel Square Tube (Wall) | 2 inch (.125) |
Stainless Steel Pipe Schedule 40 | 1.5 inch |
Stainless Steel Round Tube Wall | 2.375 inch (.125) |
Chromolly Round Tube Wall | 2 inch (.125) |
Aluminum Round Tube Wall | 2.5 inch (.156) |
Maximum Center Line Radius Clr | 9 inch |
Power | 220V / 1-phase |
Shipping Weight | 610 Lbs |
Shipping Dimensions | 40 x 32 x 43 inch |
specifications subject to change without notice |
(Click Picture to Enlarge)
If you ever wanted to upgrade your RDB-250 tube bender or your RDB-325 pipe bender to the continence of a touch screen, now you can. The RDB-XLT for Baileigh Industrial's computer programmable tube and pipe benders is now here.
The RDB-XLT has all the same features as the stock programmer, but in an easier to see and use configuration. This new controller is “plug and play", just replace the plugs from your old controller and replace them into the same slots on the new RDB-XLT, home the machine and your ready to bend all day.
|
![]() |
![]() |
Full Manual Mode, great for prototyping |
Manual Mode, allows you to set angle and spring back without having to set up a program |
Program Mode allows 170 jobs with 10 bends per job. |
Round Tubing Die Sets | |
---|---|
DS-0750T-R200 | 3/4 inch Round Tubing Die Set, 2 inch CLR |
DS-0750T-R250 | 3/4 inch Round Tube Die Set, 2-1/2 inch CLR (elipse) |
DS-0750T-R300 | 3/4 inch Round Tube Die Set, 3 inch CLR (True Radius) |
DS-0750T-R350 | 3/4 inch Round Tube Die Set, 3.5 inch CLR |
DS-0875T-R250 | 7/8 inch Round Tube Die Set, 2.5 inch CLR |
DS-0875T-R300 | 7/8 inch Round Tubing Die Set, 3 inch CLR |
DS-1000T-R250 | 1 inch Round Tube Die Set, 2 1/2 inch CLR (elipse) |
DS-1000T-R300-TR | 1 inch Round Tube Die Set, 3 inch CLR True Radius |
DS-1000T-R400 | 1 inch Round Tube Die Set, 4 inch CLR |
DS-1000T-R450 | 1 inch Round Tube Die Set, 4-1/2 inch CLR |
DS-1000T-R500 | 1 inch Round Tube Die Set, 5 inch CLR |
DS-1000T-R550 | 1 inch Round Tube Die Set, 5.5 inch CLR |
DS-1000T-R600 | 1' inch Round Tube Die Set, 6 inch CLR True Radius |
DS-1250T-R300 | 1-1/4 inch Round Tube Die Set, 3 inch CLR |
DS-1250T-R350 | 1-1/4 inch Round Tube Die Set, 3-1/2 inch CLR |
DS-1250T-R400 | 1-1/4 inch Round Tube Die Set, 4 inch CLR (elipse) |
DS-1250T-R450 | 1-1/4 inch Round Tube Die Set, 4-1/2 inch CLR |
DS-1250T-R500 | 1-1/4 inch Round Tube Die Set, 5 inch CLR |
DS-1250T-R550 | 1-1/4 inch Round Tube Die Set, 5.5 inch CLR |
DS-1250T-R600 | 1-1/4 inch Round Tube Die Set, 6 inch CLR |
DS-1500T-R300 | 1 1/2 inch Round Tube Die Set 3 inch CLR |
DS-1500T-R400 | 1-1/2 inch Round Tube Die Set, 4 inch CLR |
DS-1500T-R450 | 1-1/2 inch Round Tube Die Set, 4-1/2 inch CLR True Radius |
DS-1500T-R500 | 1-1/2 inch Round Tube Die Set, 5 inch CLR (elipse) |
DS-1500T-R500-TR | 1-1/2 inch Round Tube Die Set, 5 inch CLR Price TRUE RADIUS |
DS-1500T-R550 | 1-1/2 inch Round Tube Die Set, 5-1/2 inch CLR |
DS-1500T-R600 | 1-1/2 inch Round Tube Die Set, 6 inch CLR |
DS-1625T-R400 | 1-5/8 inch Round Tube Die Set, 4 inch CLR |
DS-1625T-R500 | 1 5/8 inch Round Tube Die Set, 5 inch CLR |
DS-1625T-R550 | 1-5/8 inch Round Tube Die Set, 5-1/2 inch CLR |
DS-1625T-R600 | 1 5/8 inch Round Tube Die Set, 6 inch CLR |
DS-1625T-R600-TR | 1 5/8 inch Round Tube Die Set, 6 inch CLR-True Radius |
DS-1750T-R550 | 1-3/4 inch Round Tube Die Set, 5-1/2 inch CLR |
DS-1750T-R600 | 1-3/4 inch Round Tube Die Set, 6 inch CLR |
DS-1750T-R650 | 1-3/4 inch Round Tube Die Set, 6.5 inch CLR |
DS-1750T-R700 | 1-3/4 inch Round Tube Die Set, 7 inch CLR |
DS-2000T-R600 | 2 inch Round Tube Die Set, 6 inch CLR |
DS-2000T-R650 | 2 inch Round Tube Die Set, 6-1/2 inch CLR |
DS-2000T-R700 | 2 inch Round Tube Die Set, 7 inch CLR |
DS-2000T-R800 | 2 inch Round Tube Die Set, 8 inch CLR |
Pipe Die Sets | |
---|---|
DS-0500P-R250 | 1/2 inch Pipe Die Set, 2.5 CLR |
DS-0750P-R200 | 3/4 inch Pipe Die Set, 2 inch CLR |
DS-0750P-R225 | 3/4 inch pipe die set, 2.25 inch CLR |
DS-0750P-R250 | 3/4 inch Pipe Die Set, 2-1/2 inch CLR |
DS-0750P-R300 | 3/4 inch Pipe Die Set, 3.0 inch CLR |
DS-0750P-R350 | 3/4 inch Pipe Die Set, 3.5 inch CLR |
DS-0750P-R400 | 3/4 inch inch Pipe Die Set, 4 inch CLR |
DS-1000P-R200 | 1-IN PIPE DIE SET, 2-IN CLR |
DS-1000P-R225 | Die set 1 inch Pipe with 2.25 Radius |
DS-1000P-R250 | 1 inch Pipe Die Set, 2.5 inch CLR-Ellipse |
DS-1000P-R275 | 1 inch Pipe Die Set, 2.75 inch CLR |
DS-1000P-R300 | 1 inch Pipe Die Set, 3 inch CLR (elipse) |
DS-1000P-R350 | 1 inch Pipe Die Set, 3.5 inch CLR |
DS-1000P-R400 | 1 inch Pipe Die Set, 4 inch CLR |
DS-1000P-R450 | 1 inch Pipe Die Set, 4-1/2 inch CLR |
DS-1000P-R500 | 1 inch Pipe Die Set, 5 inch CLR (True Radius) |
DS-1250P-R300 | 1-1/4 inch Pipe Die Set, 1.660 OD, 3.0 inch CLR (elipse) |
DS-1250P-R350 | 1-1/4 inch Pipe Die Set, 3-1/2 inch CLR |
DS-1250P-R400 | 1-1/4 inch Pipe Die Set, 4.0 inch CLR |
DS-1250P-R450 | 1-1/4 inch Pipe Die Set, 4.5 inch CLR |
DS-1250P-R500 | 1-1/4 inch Pipe Die Set, 5.0 CLR |
DS-1250P-R550 | 1-1/4 inch Pipe Die Set, 5.5 inch CLR |
DS-1250P-R600 | 1-1/4 inch Pipe Die Set, 6.0 inch CLR |
DS-1500P-R375 | 1-1/2 inch Pipe Die Set, 3.75 inch CLR (elipse) |
DS-1500P-R400 | 1-1/2 inch Pipe Die Set, 4 inch CLR |
DS-1500P-R450 | 1-1/2 inch Pipe Die Set,4.5 inch CLR |
DS-1500P-R500 | 1-1/2 inch Pipe Die Set, 5 inch CLR |
DS-1500P-R550 | 1-1/2 inch Pipe Die Set,5.5 inch CLR |
DS-1500P-R600 | 1-1/2 inch Pipe Die Set, 6.0 inch CLR |
DS-2000P-R600 | 2 inch Pipe Die Set, 6 inch CLR |
DS-2000P-R600-H | 2 inch Pipe Die Set, 6 inch CLR w/ Hardening |
DS-2000P-R650 | 2 inch Pipe Die Set, 6.5 inch CLR |
DS-2000P-R700 | 2 inch Pipe Die Set, 7 inch CLR |
DS-2000P-R700-H | 2 inch Pipe Die Set, 7 inch CLR WITH HARDENING |
Square Tube Die Sets | |
---|---|
DS-0500S-R300 | 1/2 inch Square Tube Die Set, 3 inch CLR |
DS-0750S-R350 | 3/4 inch Square Tube Die Set, 3-1/2 inch CLR |
DS-1000S-R300 | 1 inch Square Tube Die- 3.00 inch CLR |
DS-1000S-R350 | 1 inch Square Tube Die Set, 3-1/2 inch CLR |
DS-1000S-R400 | 1 inch Square Tube Die Set, 4 inch CLR |
DS-1000S-R450 | 1 inch Square Tube Die Set, 4-1/2 inch CLR |
DS-1000S-R500 | 1 inch Square Tube Die Set, 5 inch CLR |
DS-1250S-R350 | 1-1/4 inch Square tubing die set,3.5 inch CLR |
DS-1250S-R400 | 1-1/4 inch Square Tube Die Set, 4 inch CLR |
DS-1250S-R500 | 1-1/4 inch Square Tube Die Set, 5 inch CLR |
DS-1250S-R550 | 1-1/4 inch Square Tube Die Set, 5-1/2 inch CLR |
DS-1250S-R600 | 1-1/4 inch Square Tube Die Set, 6 inch CLR |
DS-1500S-R400 | 1-1/2 inch Square Tube Die Set 4 inch CLR |
DS-1500S-R500 | 1-1/2 inch Square Tube Die Set, 5 inch CLR |
DS-1500S-R550 | 1-1/2 inch Square Tube Die Set, 5-1/2 inch CLR |
DS-1500S-R600 | 1-1/2 inch Square Tube Die Set, 6 inch CLR |
DS-1500S-R650 | 1-1/2 inch Square Tube Die Set, 6-1/2 inch CLR |
DS-1500S-R700 | 1 1/2 inch square tube die set, 7 inch CLR |
DS-1750S-R600 | 1-3/4 inch Square Die Set, 6 inch CLR |
DS-1750S-R650 | 1.75 inch Square Die Set, 6.5 inch CLR |
DS-2000S-R500 | 2 inch square die set with 5 inch CLR |
DS-2000S-R600 | 2-IN SQUARE TUBE DIE SET WITH 6-IN CLR |
DS-2000S-R650 | 2 inch square die set with 6-1/2 inch CLR |
DS-2000S-R700 | 2 inch Square Tube Die Set, 7 inch CLR |
DS-2000S-R800 | 2 inch Square Tube Die Set, 8 inch CLR |
Accessories | |
---|---|
UBP-1200-175/250 | Universal Bend Die Plate forRDB-175/250 |
BT-PRO | Bend-Tech Pro Tube and Pipe Bending Software is a lower cost alternative to SE. |
BT-SUPER SE | Bend-Tech Super SE is the top of the line in tube and Pipe Bending Software. |
ORG-3600 | Arc Master Outside Radius Gauge (7 inch - 144 inch Radius) |
IRG-3600 | Arc Master Inside Radius Gauge (7 inch - 144 inch Radius) |
AF-360D | Digital Angle Finder Accuracy to .02 degrees |
AF-360D-HOLDER | Clamp and Holder for AF-360D Angle Finder, Will accept up to 3 inch Schedule 40 Pipe |
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA
FOR USE ON ANY OF THE RDB BAILEIGH BENDERS - MADE IN USA