Technical Sales 1–800–458–3687

The "New" Cutting Edge Rebar Cutting Saw

CORDLESS BNCE-20-24V # 6 (20mm) Cutting Edge Saw CORDLESS BNCE-30-24V Cutting Edge Saw BNCE-20 CUTTING EDGE SAW BNCE-30 Cutting Edge Saw BNCE-50 CUTTING EDGE SAW
CORDLESS BNCE-20-24V Cutting Edge Saw CORDLESS BNCE-30-24V Cutting Edge Saw BNCE-20 CUTTING EDGE SAW BNCE-30 Cutting Edge Saw BNCE-50 CUTTING EDGE SAW

 

The Cutting Edge Saw
BNCE-20-24V BNCE-20-24V CUTTING EDGE SAW - CORDLESS MODEL - WITH 2 BATTERIES AND CHARGER AND 2 BLADES
BNCE-30-24V BNCE-30-24V Cutting Edge Saw - CORDLESS MODEL
BNCE-20 The Cutting Edge Saw - Corded Model - Voted most innovative new tool at The World of Concrete ** Order this Cutting Edge Saw and Receive a FREE Replacement Blade - RB-BNCE-NH = $26.15 Retail Value
BNCE-30 BNCE-30 CUTTING EDGE SAW
BNCE-50 BNCE-50 CUTTING EDGE SAW
RB-BNCE-NH Replacement Blade for the BNCE-20 (NEW STYLE SAW)

RB-BNCE-MESH

Replacement Blade for Cutting Wire Mesh

BNCEP-72K

Bottom Plate Replacement Kit

BNCE-50 NEW Larger 7 inch Model of The Cutting Edge Saw ** Order this Cutting Edge Saw and Receive a FREE Carbide Tip Replacement Blade - RB-BNCE-50 = $35.40 Value
RB-BNCE-50 Carbide Tip Replacement Blade for the BNCE-50 Cutting Edge Saw
RB-BNCE-50SS Cermet Tip Replacement Blade for the BNCE-50 Cutting Edge Saw
RB-BNCE-50ST Replacement Blade for Cutting Strut up to 1-5/8in

 

 Home Products Distributors Sales Representatives Service Centers About Us Blog Contact Us CORDLESS BNCE-20-24V # 6 (20mm) Cutting Edge Saw

Click here to download manual

CORDLESS BNCE-20-24V # 6 (20mm) Cutting Edge Saw

The BNCE-20-24V is a compact and lightweight tool has a 3-position removable side handle that provides the operator with multiple cutting positions and increased maneuverability in tight areas. This amazing tool can cut a variety of materials including rebar, all-thread rod, coil rod, EMT conduit, pipe, tubing, and more. It is designed to cleanly cut the material FLUSH with the surface.

This amazing tool can cut a variety of materials including rebar (up to # 6 3/4 inch ), all-thread rod (up to 7/8 inch ), coil rod, EMT conduit, pipe, tub-ing, and more. It is designed to cleanly cut the material FLUSH with the surface. The BNCE-20-24V has a unique flush-cutting blade guard that greatly reduces blade exposure.

The BNCE-20-24V has a unique flush-cutting blade guard that greatly reduces blade exposure. The tool is designed to emit minimal cutting sparks and the cut material is burr-free and not hot to the touch. Each BNCE-20-24V has a one year warranty from the date purchase. Tungston Carbide Tipped (TCT) Cutting Blades have a limited warranty. We provide replacement parts, TCT cutting blades, technical support, customer service and a network of repair centers

Specifications BNCE-20-24V
CONSTRUCTION TYPE Battery Powered Tool
BLADE SIZE 4-3/8 inch (110 mm) - proprietary mounting
BLADE TYPE Tungsten Carbide Tipped (2 ea. Supplied)
BLADE NUMBER OF TEETH 24
NO LOAD RPM 2,000
DEPTH OF CUT 7/8 inch (22 mm)
TOOL LENGTH W/ BATTERY 17-1/4 inch (438.2 mm)
TOOL WIDTH W/ BATTERY 5-1/4 inch (133 mm)
TOOL HEIGHT W/BATTERY 3- 1/4 inch (82.6 mm)
NET TOOL WEIGHT 7.2 lbs. (3.5 kg)
POWER 24V Lithium-Ion Battery (2 ea. supplied)
AMPERAGE HOURS 6.0 Ah
WATT HOURS OF BATTERY 144 Wh
CHARGER Standard 120V Quick Charger
CHARGER WEIGHT 1 lbs (.5 kg)
NUMBER OF CUTS / CHARGE 120 + (# 5-60 grade Rebar)

 

BNCE-30-24V Cutting Edge Saw

BNCE-30-24V Cutting Edge Saw

The BNCE-30-24V is a compact and light-weight tool that has a 3-position removable side handle that provides the operator with multiple cutting positions and increased maneuverability in tight areas. This amazing tool can cut a variety of materials including rebar up to #8 (1 inch), all-thread rod (up to 1-1/8 inch), coil rod, EMT conduit, pipe, tubing, and more. It is designed to cleanly cut the material FLUSH with the surface. The BNCE-30-24V has a unique flush-cutting blade guard that greatly reduces blade exposure.

Each BNCE-30-24V has a one year warranty from the date purchase. We provide replacement parts, TCT cutting blades, technical support, customer service and a network of repair centers.

Specifications BNCE-30-24V
CONSTRUCTION TYPE Battery Powered Tool
BLADE SIZE 5 inch (127 mm) - proprietary mounting
BLADE TYPE Tungsten Carbide Tipped (2 ea. Supplied)
BLADE NUMBER OF TEETH 30
NO LOAD RPM 2,200
DEPTH OF CUT 1.181 inch (30mm)
TOOL LENGTH W/ BATTERY 17 1/2 inch (444.5 mm)
TOOL WIDTH W/ BATTERY 5 1/4 inch (133 mm)
TOOL HEIGHT W/BATTERY 3 1/4 inch (82.6 mm)
NET TOOL WEIGHT 7.2 lbs. (3.5 kg)
POWER 24V Lithium-Ion Battery (2 ea. supplied)
AMPERAGE HOURS 6.0 Ah
WATT HOURS OF BATTERY 144 Wh
CHARGER Standard 120V Quick Charger
CHARGER WEIGHT 1 lbs (.5 kg)

 

BNCE-20 #6 (20mm) Cutting Edge Saw

Click here to download manual

BNCE-20 # 6 (20mm) Cutting Edge Saw

The BNCE-20 is a compact and lightweight tool has a 3-position removable side handle and a rotating trigger handle that provides the operator with multiple cutting positions and increased maneuverability in tight areas. This amazing tool can cut a variety of materials including rebar, all-thread rod, coil rod, EMT conduit, pipe, tubing, burglar bars and more. It is designed to cleanly cut the material FLUSH with the surface. The BNCE-20 has a unique flush-cutting blade guard that greatly reduces blade exposure. It also has a double insulated power harness and is ETL/UL Certified and Listed. The tool is designed to emit minimal cutting sparks and the cut material is burr-free and cool to the touch. Each BNCE-20 has a one year warranty from the date purchase. TCT Cutting Blades have a limited warranty.

A new design in a multipurpose cutting tool that can be used on all kinds of ma-terial found on the job. It can easily cut rebar, all-thread rod, locks, chain, EMT conduit,  copper  pipe,  steel  rods,  steel  tubing,  and  much  more.  This  hand-held  tool is lightweight and powered by 1100W double insulated motor that only pulls 9 amps using standard 120V/60Hz. It features a three position handle and has a no load speed of 2000 rpm. The capacity of the opening is .875 inch (23.62mm). This tool  is  ETL  Listed  and  is  excellent  for  cutting  material  flush  with  concrete  or  block. Prepaid freight on four + tool order to one location

Specifications BNCE-20
VOLTAGE 120
HERTZ 60
AMPS 9
WATTS 1100
BLADE SIZE 4.375 inch (110 mm)
BLADE TYPE (2 ea.) Tungsten Carbide Tipped
BLADE NUMBER OF TEETH 24
BLADE KERF 1.6 mm
NO LOAD RPM 2,000
DEPTH OF CUT .860 inch (21.8 mm)
CONSTRUCTION TYPE DOUBLE INSULATED
CORD TYPE 18 AWG, 2 CORD
PLUG TYPE U.S. POLARIZED 2-PRONG
CORD LENGTH 10 ft. (3 m)
TOOL LENGTH 20.3 inch (515 mm)
TOOL WIDTH 5.5 inch (140 mm)
TOOL HEIGHT 3.9 inch (99 mm)
NET TOOL WEIGHT 7.6 lbs. (3.5 kg)

 

BNCE-30 Cutting Edge Saw

Click here to download manual

BNCE-30 Cutting Edge Saw

BNCE-30 Cutting Edge Saw A multipurpose cutting tool. It can easily cut # 8 (1 inch) rebar, all-thread rod, chain, EMT conduit, copper pipe, steel rods, steel tubing, and much more. This hand-held tool is lightweight and powered by 1100W double insulated motor that only pulls 9 amps using standard 120V/60Hz. It features a three position handle and has a no load speed of 2000 rpm. The capacity of the opening is 1.181 inch (30mm). This tool is ETL Listed and is excellent for cutting material flush with concrete or block. Comes complete with two TCT 5 inch blades a chip collector bag and case. This tool is ETL Listed and is excellent for cutting rebar near flush with concrete or block construction.

Specifications BNCE-30
Voltage/Amperage 120V 60Hz / 9 amps
Watts 1100W
Blade (2 ea.) 5 inch (127 mm) Tungsten Carbide Tipped
No Load RPM 2,000
Depth of Cut 1.2 inch (30 mm)
Length x Width x Height 20.3 x 6.1 x 4 inch (515 mm x 155 mm x 101 mm)
Net Tool Weight 7.7 lbs. (3.5 kg)

 

BNCE-50 #8 (25mm) Cutting Edge Saw

Click to download manual

BNCE-50 # 8 (25mm) Cutting Edge Saw

The BNCE-50 is a larger version of our BNCE-20 with a 7 inch blade for cutting larger material. This compact and lightweight tool has a wrap-around top handle and a rotating trigger handle that provides the operator with multiple cutting positions and increased maneuverability in tight areas.  The tool works great on rebar up to size #8. It can also cut pipe, strut, threaded rod, coil rod, tubing, and a variety of other steel material up to a diameter of 1-3/4 inches. The tool comes in a blow molded plastic case and we include an extra blade plus replacement brushes for the motor with each tool. Installed on the bottom of the tool is a spring loaded material guide. A specially designed chip collection bag comes with the tool to collect steel fragments as the tool is cutting. This tool has a double insulated power harness and is ETL/UL Certified and Listed. BN Products-USA provides replacement parts, Cutting Edge Blades, technical support, customer service and a network of repair centers. Each Cutting Edge Saw is warranted to be free of defects from workmanship and materials for the period of one year from the date of original purchase.

Specifications BNCE-50
VOLTAGE 120
HERTZ 60
AMPS 9
WATTS 1100
BLADE SIZE 7 inch
BLADE TYPE (2 ea.) Tungsten Carbide Tipped
BLADE NUMBER OF TEETH 32
BLADE KERF 1.6 mm
NO LOAD RPM 2,000
DEPTH OF CUT 1.75 inch (44 mm)
CONSTRUCTION TYPE DOUBLE INSULATED
CORD TYPE 18 AWG, 2 CORD
PLUG TYPE U.S. POLARIZED 2-PRONG
CORD LENGTH 10 ft. (3 m)
TOOL LENGTH 21 inch (533 mm)
TOOL WIDTH 8 inch (203 mm)
TOOL HEIGHT 3.9 inch (99 mm)
NET TOOL WEIGHT 11.3 lbs. (5 kg)

 

BNCE-20-24V
THE CUTTING EDGE SAW¦ - CORDLESS MODEL - CUTS UP TO #6 REBAR WITH 2 BATTERIES AND CHARGER AND 2 BLADES . COMES IN BLOW MOLDED CASE
CALL 800-458-3687 X1 FOR OUR BROTHER-IN-LAW SPECIAL
Mfg. item #: BNCE-20-24V
BENBNCE-20-24V
Ships FREE via UPS to lower 48 states.5
$667.05

17
BNCE-30-24V
THE CUTTING EDGE SAW¦ - CORDLESS MODEL - CUTS UP TO #8 REBAR WITH 2 BATTERIES AND CHARGER AND 2 BLADES . COMES IN BLOW MOLDED CASE
CALL 800-458-3687 X1 FOR OUR BROTHER-IN-LAW SPECIAL
Mfg. item #: BNCE-30-24V
BENBNCE-30-24V
Ships FREE via UPS to lower 48 states.5
NEW ITEM
$759.65

17
BNCE-20
THE CUTTING EDGE SAW¦ - CORDED MODEL - CUTS UP TO #6 REBAR AND THREADED ROD UP TO 7/8 INCH. COMES WITH EXTRA BLADE AND A BLOW MOLDED CASE
CALL 800-458-3687 X1 FOR OUR BROTHER-IN-LAW SPECIAL
Mfg. item #: BNCE-20
BENBNCE-20
Ships FREE via UPS to lower 48 states.5
$335.70

17   1
BNCE-30
THE CUTTING EDGE SAW¦ - CORDED MODEL - CUTS UP TO #8 REBAR AND THREADED ROD UP TO 1-1/8 INCH. COMES WITH EXTRA BLADE AND A BLOW MOLDED CASE.
CALL 800-458-3687 X1 FOR OUR BROTHER-IN-LAW SPECIAL
Mfg. item #: BNCE-30
BENBNCE-30
Ships FREE via UPS to lower 48 states.5
NEW ITEM
$405.65

17
BNCE-50
THE CUTTING EDGE SAW¦ - CORDED MODEL - LARGER 7à MODEL DESIGNED TO CUT MATERIAL UP TO 2 INCH THICKNESS INCLUDING STRUT. COMES IN BLOW MOLDED CASE.
CALL 800-458-3687 X1 FOR OUR BROTHER-IN-LAW SPECIAL
Mfg. item #: BNCE-50
BENBNCE-50
Ships FREE via UPS to lower 48 states.5
$488.15

17
RB-BNCE-NH
BLADE FOR THE BNCE-20 SERIES CUTTING EDGE SAWS¦ (110MM)
Mfg. item #: RB-BNCE-NH
BENRB-BNCE-NH
FREE shipping when ordered with a machine from this manufacturer.20
$23.95

17   2
RB-BNCE-MESH
SPECIAL BLADE FOR BNCE-20 SERIES FOR CUTTING WIRE MESH (110MM)
Mfg. item #: RB-BNCE-MESH
BENRB-BNCE-MESH
FREE shipping when ordered with a machine from this manufacturer.20
$23.95

17
BNCEP-72K
BNCEP-72K - BOTTOM PLATE REPLACEMENT KIT
Mfg. item #: BNCEP-72K
BENBNCEP-72K
FREE shipping when ordered with a machine from this manufacturer.20
$657.38

444
RB-BNCE-50
CARBIDE TIP BLADE FOR THE BNCE-50 CUTTING EDGE SAW (185MM)
Mfg. item #: RB-BNCE-50
BENRB-BNCE-50
FREE shipping when ordered with a machine from this manufacturer.20
$32.45

17
RB-BNCE-50SS
BNCE-50 CUTTING EDGE¦ BLADE FOR CUTTING STAINLESS STEEL REBAR (185MM)
Mfg. item #: RB-BNCE-50SS
BENRB-BNCE-50SS
FREE shipping when ordered with a machine from this manufacturer.20
$56.40

17
RB-BNCE-50ST
REPLACEMENT BLADE FOR CUTTING STRUT UP TO 1-5/8 (185MM)
Mfg. item #: RB-BNCE-50ST
BENRB-BNCE-50ST
FREE shipping when ordered with a machine from this manufacturer.20
$56.40

17
Copyright © 2020 Smith-Hamilton, Inc
0.011 200504 12:06