Call 1–800–458–3687 or  Email us!

The Cutting Edge Rebar Cutting Saws

CORDLESS BNCE-20-24V # 6 (20mm) Cutting Edge Saw CORDLESS BNCE-30-24V Cutting Edge Saw BNCE-20 CUTTING EDGE SAW BNCE-30 Cutting Edge Saw
CORDLESS BNCE-20-24V Cutting Edge Saw CORDLESS BNCE-30-24V Cutting Edge Saw BNCE-20 CUTTING EDGE SAW BNCE-30 Cutting Edge Saw

 

The Cutting Edge Saw™

The Cutting Edge Saw™ concept is simple – we use low-RPM to reduce heat and sparking – leaving a clean, burr-free, and cool-to-touch cut every time when cutting ferrous and non-ferrous metals such as rebar, strut, all-thread, and much more! “Such a great tool and innovation… Many of my customers have enjoyed the progression of this tool,” says one industry reviewer! …Voted the most innovative product at the World of Concrete Expo – this your cold-cutting rebar saw & much more!

 

The Cutting Edge Saw
BNCE-20 The Cutting Edge Saw - Corded Model
BNCE-30 BNCE-30 CUTTING EDGE SAW
BNCE-20-24V BNCE-20-24V CUTTING EDGE SAW - CORDLESS MODEL - WITH 2 BATTERIES AND CHARGER AND 2 BLADES
BNCE-30-24V BNCE-30-24V Cutting Edge Saw - CORDLESS MODEL
BNCE-24VLI Replacement Battery 24V Li-ion
BNCE-24VCHGR Replacement Battery Charger for the BNCE-24VLI battery
RB-BNCE-KNH Blade for the BNCE-20 Series Cutting Edge Saws™ (110mm)
RB-BNCE-MESH Special Blade for BNCE-20 Series for Cutting Wire Mesh (110mm)
RB-BNCE-30 Blade for the BNCE-30 Series Cutting Edge Saws (125mm)
RB-BNCE-50 Carbide Tip Blade for the BNCE-50 Cutting Edge Saw (185mm)
RB-BNCE-50SS BNCE-50 Cutting Edge Blade for cutting stainless steel rebar (185mm)
RB-BNCE-50ST Replacement Blade for Cutting Strut up to 1-5/8 inch (185mm)

 

 Home Products Distributors Sales Representatives Service Centers About Us Blog Contact Us CORDLESS BNCE-20-24V # 6 (20mm) Cutting Edge Saw

Click here to download manual

CORDLESS BNCE-20-24V # 6 (20mm) Cutting Edge Saw

The BNCE-20-24V is a compact and lightweight tool has a 3-position removable side handle that provides the operator with multiple cutting positions and increased maneuverability in tight areas. This amazing tool can cut a variety of materials including rebar, all-thread rod, coil rod, EMT conduit, pipe, tubing, and more. It is designed to cleanly cut the material FLUSH with the surface.

This amazing tool can cut a variety of materials including rebar (up to # 6 3/4 inch ), all-thread rod (up to 7/8 inch ), coil rod, EMT conduit, pipe, tub-ing, and more. It is designed to cleanly cut the material FLUSH with the surface. The BNCE-20-24V has a unique flush-cutting blade guard that greatly reduces blade exposure.

The BNCE-20-24V has a unique flush-cutting blade guard that greatly reduces blade exposure. The tool is designed to emit minimal cutting sparks and the cut material is burr-free and not hot to the touch. Each BNCE-20-24V has a one year warranty from the date purchase. Tungston Carbide Tipped (TCT) Cutting Blades have a limited warranty. We provide replacement parts, TCT cutting blades, technical support, customer service and a network of repair centers

Specifications BNCE-20-24V
CONSTRUCTION TYPE Battery Powered Tool
BLADE SIZE 4-3/8 inch (110 mm) - proprietary mounting
BLADE TYPE Tungsten Carbide Tipped (2 ea. Supplied)
BLADE NUMBER OF TEETH 24
NO LOAD RPM 2,000
DEPTH OF CUT 7/8 inch (22 mm)
TOOL LENGTH W/ BATTERY 17-1/4 inch (438.2 mm)
TOOL WIDTH W/ BATTERY 5-1/4 inch (133 mm)
TOOL HEIGHT W/BATTERY 3- 1/4 inch (82.6 mm)
NET TOOL WEIGHT 7.2 lbs. (3.5 kg)
POWER 24V Lithium-Ion Battery (2 ea. supplied)
AMPERAGE HOURS 6.0 Ah
WATT HOURS OF BATTERY 144 Wh
CHARGER Standard 120V Quick Charger
CHARGER WEIGHT 1 lbs (.5 kg)
NUMBER OF CUTS / CHARGE 120 + (# 5-60 grade Rebar)

 

BNCE-30-24V Cutting Edge Saw

BNCE-30-24V Cutting Edge Saw

The BNCE-30-24V is a compact and light-weight tool that has a 3-position removable side handle that provides the operator with multiple cutting positions and increased maneuverability in tight areas. This amazing tool can cut a variety of materials including rebar up to #8 (1 inch), all-thread rod (up to 1-1/8 inch), coil rod, EMT conduit, pipe, tubing, and more. It is designed to cleanly cut the material FLUSH with the surface. The BNCE-30-24V has a unique flush-cutting blade guard that greatly reduces blade exposure.

Each BNCE-30-24V has a one year warranty from the date purchase. We provide replacement parts, TCT cutting blades, technical support, customer service and a network of repair centers.

Specifications BNCE-30-24V
CONSTRUCTION TYPE Battery Powered Tool
BLADE SIZE 5 inch (127 mm) - proprietary mounting
BLADE TYPE Tungsten Carbide Tipped (2 ea. Supplied)
BLADE NUMBER OF TEETH 30
NO LOAD RPM 2,200
DEPTH OF CUT 1.181 inch (30mm)
TOOL LENGTH W/ BATTERY 17 1/2 inch (444.5 mm)
TOOL WIDTH W/ BATTERY 5 1/4 inch (133 mm)
TOOL HEIGHT W/BATTERY 3 1/4 inch (82.6 mm)
NET TOOL WEIGHT 7.2 lbs. (3.5 kg)
POWER 24V Lithium-Ion Battery (2 ea. supplied)
AMPERAGE HOURS 6.0 Ah
WATT HOURS OF BATTERY 144 Wh
CHARGER Standard 120V Quick Charger
CHARGER WEIGHT 1 lbs (.5 kg)

 

BNCE-20 #6 (20mm) Cutting Edge Saw

Click here to download manual

BNCE-20 # 6 (20mm) Cutting Edge Saw

The BNCE-20 is a compact and lightweight tool has a 3-position removable side handle and a rotating trigger handle that provides the operator with multiple cutting positions and increased maneuverability in tight areas. This amazing tool can cut a variety of materials including rebar, all-thread rod, coil rod, EMT conduit, pipe, tubing, burglar bars and more. It is designed to cleanly cut the material FLUSH with the surface. The BNCE-20 has a unique flush-cutting blade guard that greatly reduces blade exposure. It also has a double insulated power harness and is ETL/UL Certified and Listed. The tool is designed to emit minimal cutting sparks and the cut material is burr-free and cool to the touch. Each BNCE-20 has a one year warranty from the date purchase. TCT Cutting Blades have a limited warranty.

A new design in a multipurpose cutting tool that can be used on all kinds of ma-terial found on the job. It can easily cut rebar, all-thread rod, locks, chain, EMT conduit,  copper  pipe,  steel  rods,  steel  tubing,  and  much  more.  This  hand-held  tool is lightweight and powered by 1100W double insulated motor that only pulls 9 amps using standard 120V/60Hz. It features a three position handle and has a no load speed of 2000 rpm. The capacity of the opening is .875 inch (23.62mm). This tool  is  ETL  Listed  and  is  excellent  for  cutting  material  flush  with  concrete  or  block. Prepaid freight on four + tool order to one location

Specifications BNCE-20
VOLTAGE 120
HERTZ 60
AMPS 9
WATTS 1100
BLADE SIZE 4.375 inch (110 mm)
BLADE TYPE (2 ea.) Tungsten Carbide Tipped
BLADE NUMBER OF TEETH 24
BLADE KERF 1.6 mm
NO LOAD RPM 2,000
DEPTH OF CUT .860 inch (21.8 mm)
CONSTRUCTION TYPE DOUBLE INSULATED
CORD TYPE 18 AWG, 2 CORD
PLUG TYPE U.S. POLARIZED 2-PRONG
CORD LENGTH 10 ft. (3 m)
TOOL LENGTH 20.3 inch (515 mm)
TOOL WIDTH 5.5 inch (140 mm)
TOOL HEIGHT 3.9 inch (99 mm)
NET TOOL WEIGHT 7.6 lbs. (3.5 kg)

 

BNCE-30 Cutting Edge Saw

Click here to download manual

BNCE-30 Cutting Edge Saw

BNCE-30 Cutting Edge Saw A multipurpose cutting tool. It can easily cut # 8 (1 inch) rebar, all-thread rod, chain, EMT conduit, copper pipe, steel rods, steel tubing, and much more. This hand-held tool is lightweight and powered by 1100W double insulated motor that only pulls 9 amps using standard 120V/60Hz. It features a three position handle and has a no load speed of 2000 rpm. The capacity of the opening is 1.181 inch (30mm). This tool is ETL Listed and is excellent for cutting material flush with concrete or block. Comes complete with two TCT 5 inch blades a chip collector bag and case. This tool is ETL Listed and is excellent for cutting rebar near flush with concrete or block construction.

Specifications BNCE-30
Voltage/Amperage 120V 60Hz / 9 amps
Watts 1100W
Blade (2 ea.) 5 inch (127 mm) Tungsten Carbide Tipped
No Load RPM 2,000
Depth of Cut 1.2 inch (30 mm)
Length x Width x Height 20.3 x 6.1 x 4 inch (515 mm x 155 mm x 101 mm)
Net Tool Weight 7.7 lbs. (3.5 kg)

 

BNCE-20
THE CUTTING EDGE SAWª - CORDED MODEL - CUTS UP TO #6 REBAR AND THREADED ROD UP TO 7/8 INCH. COMES WITH EXTRA BLADE AND A BLOW MOLDED CASE
Mfg. item #: BNCE-20
BENBNCE-20
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$345.70

70   2
BNCE-30
THE CUTTING EDGE SAWª - CORDED MODEL - CUTS UP TO #8 REBAR AND THREADED ROD UP TO 1-1/8 INCH. COMES WITH EXTRA BLADE AND A BLOW MOLDED CASE.
Mfg. item #: BNCE-30
BENBNCE-30
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$417.75

70
BNCE-20-24V
THE CUTTING EDGE SAWª - CORDLESS MODEL - CUTS UP TO #6 REBAR WITH 2 BATTERIES AND CHARGER AND 2 BLADES . COMES IN BLOW MOLDED CASE
Mfg. item #: BNCE-20-24V
BENBNCE-20-24V
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$687.15

70
BNCE-30-24V
THE CUTTING EDGE SAWª - CORDLESS MODEL - CUTS UP TO #8 REBAR WITH 2 BATTERIES AND CHARGER AND 2 BLADES . COMES IN BLOW MOLDED CASE
Mfg. item #: BNCE-30-24V
BENBNCE-30-24V
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$782.45

70
BNCE-24VLI
REPLACEMENT BATTERY 24V LI-ION
Mfg. item #: BNCE-24VLI
BENBNCE-24VLI
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$141.05

70
BNCE-24VCHGR
REPLACEMENT BATTERY CHARGER FOR THE BNCE-24VLI BATTERY
Mfg. item #: BNCE-24VCHGR
BENBNCE-24VCHGR
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$66.70

70
RB-BNCE-KNH
BLADE FOR THE BNCE-20 SERIES CUTTING EDGE SAWSª (110MM)
Mfg. item #: RB-BNCE-KNH
BENRB-BNCE-KNH
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$23.95

70
RB-BNCE-MESH
SPECIAL BLADE FOR BNCE-20 SERIES FOR CUTTING WIRE MESH (110MM)
Mfg. item #: RB-BNCE-MESH
BENRB-BNCE-MESH
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$23.95

70
RB-BNCE-30
BLADE FOR THE BNCE-30 SERIES CUTTING EDGE SAWSª (125MM)
Mfg. item #: RB-BNCE-30
BENRB-BNCE-30
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$31.15

70
RB-BNCE-50
CARBIDE TIP BLADE FOR THE BNCE-50 CUTTING EDGE SAW (185MM)
Mfg. item #: RB-BNCE-50
BENRB-BNCE-50
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$32.45

70
RB-BNCE-50SS
BNCE-50 CUTTING EDGEª BLADE FOR CUTTING STAINLESS STEEL REBAR (185MM)
Mfg. item #: RB-BNCE-50SS
BENRB-BNCE-50SS
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$56.40

70
RB-BNCE-50ST
REPLACEMENT BLADE FOR CUTTING STRUT UP TO 1-5/8 (185MM)
Mfg. item #: RB-BNCE-50ST
BENRB-BNCE-50ST
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$56.40

70
Copyright © 2024 Smith-Hamilton, Inc
0.011 240705 09:25