Birmingham KGY-1440GH Lathe

Features

No change gear in tool box
The thread category complete, not only cutting metric thread and imperial thread, but also cutting diametric thread and module thread
Minimum cross feed 0.01 mm/rev, minimum longitudian feed 0.046 mm/rev

Standard Accessories

Special Accessories

Specifications
Model	KGY-1440GH
Swing over bed	360mm(14 inch)
Swing over cross slide	224mm(8-13/16 inch)
Swing in gap diameter	502mm(19-3/4 inch)
length in gap	210mm(8-1/4 inch)
Center height	179mm(7 inch)
Admits between	750mm(30 inch) or 1000mm(40 inch)
Spindle bore	38mm(1-1/2 inch)
Spindle nose	D1-4 or D1-5
Taper in nose	No 5 Morse
Speeds number	8
Speeds range	70-2000r/min
Cross slide travel	170mm (6-11/16 inch)
Compound rest travel	95mm (3-9/16 inch)
Lead screw thread	8T.P.I. or 3mm pitch
Feed rod diameter	19mm (3/4 inch)
Cutting tool max section	16mmÃ16mm (5/8Ã5/8 inch)
Threads imperial pitches	42 Nos. 4-112T.P.I
Threads metric pitches	44 Nos. 0.1-7mm
Threads diametral pitches	25 Nos. 16-112DP
Threads module pitches	34 Nos. 0.1-1.75MP
Longitudinal feeds imperial	24 Nos. 0.00168-0.1175 inch/rev
Longitudinal feeds metric	24 Nos. 0.046-3.249 mm/rev
Cross feeds imperial	32 Nos. 0.00046-0.03231 inch/rev
Cross feeds metric	24 Nos. 0.01-0.703 mm/rev
Quill diameter	32mm(1-1/4 inch) or 42mm (1-21/32 inch)
Quill travel	100mm (3-15/16 inch)
Quill taper	No3 Morse
Main motor power	1.5kW (2HP)
Coolant pump power	40W (1/16HP)
Packing size (cm)	168 Ã76 Ã153 (750mm) or 193Ã76Ã153 (1000mm)
NG/GW (kg)	510/630 (750mm) or 540/645 (1000mm)

Compare

BIRMINGHAM PRECISION GAP BED LATHES WITH 1 1/2 SPINDLE BORE - 14 X 40 ,D1-4, 8 SPD, 2 HP, 220V, 3PH OR 1PH

Mfg. item #: KGY-1440GH

CPTKGY-1440GH

lease to own for as little as:$95 per month!

Call for freight quote on this item or we will confirm freight charges before shipping.¹

NEW ITEM

$4,759.46