554
Call 1–800–458–3687 or  Email us!

Birmingham Mills

1649-C Birmingham Knee Mills

BPV-3949-C Birmingham Variable Speed Knee Milling Machines

Birmingham BPS-1054 Knee Mill

BPV-1054-C Birmingham Variable Speed Knee Milling Machine

BPV-4KV Birmingham Knee Mills

1649 Birmingham
Knee Mills 		BPV-3949 Birmingham Variable Speed Knee Milling Machines Birmingham BPS-1054
Knee Mill 		BPV-1054 Birmingham Variable Speed Knee Milling Machine BPV-4KV Birmingham
Knee Mills

 

Models and Accessories
BPS-1649 9 X 49 inch TABLE, 16 SPEED ,R8, 3HP, 3PH 220V OR 440V MOTOR
BPS-1649-CUPKG SPECIAL - 9 X 49 inch TABLE, 16 SPEED ,R8, 3HP, 3PH 220V OR 440V MOTOR  (SPECIAL - INCLUDES UNIX DRO and X POWER FEED FACTORY INSTALLED, AV6 - 6 inch Heavy Duty  MILLING VISE, R8 - 11PC COLLET SET and CK58 - 28PC CLAMPING KIT)
BPV-3949 9 X 49 inch TABLE, VARI-SPEED, R8, 3HP, 3PH 220V OR 440V MOTOR
BPV-3949-CUPKG SPECIAL - 9 X 49 inch TABLE, VARI-SPEED, R8, 3HP, 3PH 220V OR 440V MOTOR   (SPECIAL - INCLUDES UNIX DRO and X POWER FEED FACTORY INSTALLED, AV6 - 6 inch Heavy Duty  MILLING VISE, R8 - 11PC COLLET SET and CK58 - 28PC CLAMPING KIT)
BPS-1054 10 X 54 inch TABLE, 16 SPEED Y,Z SQUARE WAY, R8, 3HP, 3PH, /220V OR 440V
BPS-1054-CUPKG SPECIAL - 10 X 54 inch TABLE, 16 SPEED Y,Z SQUARE WAY, R8, 3HP, 3PH, /220V OR 440V   (SPECIAL - INCLUDES UNIX DRO and X POWER FEED FACTORY INSTALLED, AV6 - 6 inch Heavy Duty  MILLING VISE, R8 - 11PC COLLET SET and CK58 - 28PC CLAMPING KIT)
BPV-1054 10 X 54 inch TABLE ,VARI- SPEED Y,Z SQUARE WAY, R8, 3HP, 3PH, /220V OR 440V
BPV-1054-CUPKG SPECIAL - 10 X 54 inch TABLE ,VARI- SPEED Y,Z SQUARE WAY, R8, 3HP, 3PH, /220V OR 440V  (SPECIAL - INCLUDES UNIX DRO and X POWER FEED FACTORY INSTALLED, AV6 - 6 inch Heavy Duty  MILLING VISE, R8 - 11PC COLLET SET and CK58 - 28PC CLAMPING KIT)
BPV-4KV 10 X 54 inch TABLE ,VARI- SPEED Y,Z SQUARE WAY, NT 40, 5HP, 3PH, /220V OR 440V
BPV-4KV-CUPKG SPECIAL - 10 X 54 inch TABLE ,VARI- SPEED Y,Z SQUARE WAY, NT 40, 5HP, 3PH, /220V OR 440V  INCLUDES UNIX DRO AND X POWER FEED FACTORY INSTALLED (SPECIAL - INCLUDES UNIX DRO and X POWER FEED FACTORY INSTALLED, AV6 - 6 inch Heavy Duty  MILLING VISE, R8 - 11PC COLLET SET and CK58 - 28PC CLAMPING KIT)
VOLTAGE VOLTAGE CHANGE FROM 3 Phae to 1 Phase 220V MILL
UN-949 MILLING MACHINE  UNIX 2X AXIS DIGITAL READOUT - FACTORY INSTALLED
HQ-R8E ( R8 SPINDLE ) POWER AIR DRAW BAR - FACTORY INSTALLED
FLD-COOL COOLANT SYSTEM W/CHIP TRAY - FACTORY INSTALLED
NW-1054-3Q NEWALL DRO 3 AXIS (DP700) (QUILL)
NW-1054-3K NEWALL DRO 3 AXIS (DP700) (KNEE)
HQ-40E ( HQ-40 / # 40 SPINDLE ) POWER AIR DRAW BAR - FACTORY INSTALLED
HLT HALOGEN WORK LIGHT - 110V
AV-6 6 inch MILLING VISE
R-8 11PC R-8 COLLET SET
PF-150X POWER FEED X-AXIS - FACTORY INSTALLED
PF-150Y POWER FEED Y AXIS (CROSS) - FACTORY INSTALLED
PF-150Z POWER FEED Z AXIS (KNEE) - FACTORY INSTALLED

VERTICAL MILLING MACHINE: TAIWAN MADE HEAD WITH CHINA MADE BODY

1649-C Birmingham Knee Mills

BIRMINGHAM  BPS-1649

Step  Pulley  Vertical  Milling  Machine - Knee  Typ
 
Taiwan  Head 
  • 9  x  49 inch  Table
  • High  Grade  Cast  Iron  Frame
  • Dovetail  Guideways
  • High  Precision  Class  7  Spindle  Bearings
  • Hardened and Ground  Work  Table
  • Hardened and Ground  On  X and Y  Axis  Slide  Ways  
  • Tilting  and  Rotating  Head  
  • Chromed  Ground  Quill
  • Hand  and  Power  Spindle  Feeds
  • Double  Knee  and  Table  Locks   
  • R-8  Spindle
  • 90  to  5600  ( 16  Speeds ) / 3  Phase  Machines
  • 90  to  2800  (  8  Speeds  ) / Single  Phase  Machines
  • 600  lb  Table  Load  Capacity
  • Quill  Travel: 5 inch
  • Cross  Travel: 13 1/4 inch
  • Vertical  Travel  ( Knee ) : 16 inch
  • Table  Travel  ( Hand  Only ): 35 1/2 inch
  • Table  Travel ( W/ Power  Feed ): 33 inch
  •  3  HP, 220  Volt / 440  Volt / 3  PH
  • Optional: 220 Volt  Single  Phase  Motor  On  BPV-3949-C
  • Machine  Net  Weight: 2350  Lbs

VERTICAL MILLING MACHINE: TAIWAN MADE HEAD

The 9 x 42 inch Milling machine has always been an industry standard. The BPS-1642 stacks up nicely against the best machines made.

Standard Features:

  • - High quality Taiwan-made mill head
  • - High precision
  • - Super strong column and base
  • - Low maintenance machines
  • - High precision leadscrews
  • - Satin chrome finished dials
  • - Built-in coolant column base
  • - Double knee and table locks
  • - Ram equipped w/ double locks
  • - Large diameter quill is chromed
  • - One-piece quill pinion and shaft
  • - Spindle head is internally cooled
  • - Hardened & ground ways
  • - Heavy-duty motor 3 phase or 1 phase
  • - High precision class 7 spindle bearings
  • - Three-stage power downfeed w/ auto stop
  • - One year warranty and 2nd year extended

Standard Equipment:

  • - Tool box 1 set
  • - Front Chip Guard 1 pc
  • - Rear Chip Guard 1 pc
  • - Draw Bar 1 pc
  • - One Shot Lube
Specifications
Table Size 9 x 49 inch
Table load capacity 600 lbs.
Table T-slot size 5/8 x 3 inch
Longitudinal travel hand only 35 1/2 inch
Longitudinal travel w/power feed 33 inch
Cross travel 13 1/4 inch
Vertical travel 16 inch
Ram travel 12 inch
Quill travel 5 inch
Spindle taper R8
Head swivel RH.LH 90/90 degree
Head tilting f/b 45/45 degree
Ram turret swivel 360 degree
Spindle motor 3 hp 220 V (2 hp 1 ph, 8 speeds)
Spindle speeds type step pulley
Spindle speeds (rpm) 90-5600(16 speeds)
90-2800(8 speeds) 1 Phase Units
Net weight 2500 lbs
A x B x C 86 x 68 x 67 inch

 

BPV-3949-C Birmingham Variable Speed Knee Milling Machines

BIRMINGHAM  BPV-3949 / BPV-3949F

Variable  Speed  Vertical  Milling  Machine - Knee  Type
*YASKAWA  EVS  inverter  drive  on  BPV-3949F  ( Electronic  Variable  Speed )
 
Taiwan  Head  and 
  • 9"  x  49"  Table
  • High  Grade  Cast  Iron  Frame
  • Dovetail  Guideways
  • High  Precision  Class  7  Spindle  Bearings
  • Hardened & Ground  Work  Table
  • Hardened & Ground  On  X & Y  Axis  Slide  Ways  
  • Tilting  and  Rotating  Head  
  • Chromed  Ground  Quill
  • Hand  and  Power  Spindle  Feeds
  • Double  Knee  and  Table  Locks   
  • R-8  Spindle
  • 60  to  4300  RPM  on  the  BPV-3949-C    ( Vari-Speed )
  • 65  to  5000  RPM  on  the  BPV-3949F-C ( Electronic  Variable  Speed )
  • 600  lb  Table  Load  Capacity
  • Quill  Travel: 5"
  • Cross  Travel: 13 1/4"
  • Vertical  Travel  ( Knee ) : 16"
  • Table  Travel  ( Hand  Only ): 35 1/2"
  • Table  Travel ( W/ Power  Feed ): 33"
  •  3  HP, 220  Volt / 440  Volt / 3  PH
  • Optional  220 Volt  Single  Phase  Motor  On  BPV-3949-C
  • Machine  Net  Weight: 2350  Lbs

Standard Features:

  • - High quality Taiwan-made mill head
  • - Super strong column and base
  • - Low maintenance machines
  • - High precision leadscrews
  • - Satin chrome finished dials
  • - Built-in coolant column base
  • - Double knee and table locks
  • - Ram equipped w/ double locks
  • - Large diameter quill is chromed
  • - One-piece quill pinion and shaft
  • - Spindle head is internally cooled
  • - Hardened & ground ways
  • - Heavy-duty motor 3 phase or 1 phase
  • - High precision class 7 spindle bearings
  • - Three-stage power downfeed w/ auto stop
  • - One year warranty and 2nd year extended

Standard Equipment:

  • - Tool box 1 set
  • - Front Chip Guard 1 pc
  • - Rear Chip Guard 1 pc
  • - Draw Bar 1 pc
  • - One Shot Lube
Specifications BPV-3949
Table Size 9 x 49 inch
Table load capacity 600 lbs.
Table T-slot size 5/8 x 3 inch
Longitudinal travel hand only 35 1/2 inch
Longitudinal travel w/power feed 33 inch
Cross travel 13 1/4 inch
Vertical travel 16 inch
Ram travel 12 inch
Quill travel 5 inch
Spindle taper R8
Head swivel RH.LH 90/90 degree
Head tilting f/b 45/45 degree
Ram turret swivel 360 degree
Spindle motor 3 hp 3ph(3hp, 1ph)
Spindle speeds type Var-speed/evs
Spindle speeds (rpm) BPV 60-4300 (vari)
BPV-F 65-5000 (EVS)
Net weight 2600 lbs
A x B x C 86 x 69 x 67 inch
SPECIFICATIONS  BPV-3949 (2VS)
Table Size 9" x  49"
  230 x 1244mm
Table Load Capacity 700 lbs. 
Number of T-Slots 3
T-Slots Width 0.63"  16mm
T-Slot Center Distance 2.48"  63mm
Table Ways (X Axis) Dovetail
Bed Ways (Y Axis) Dovetail
Column Ways (Z Axis) Dovetail
TRAVELS
Longitudinal (X Axis) - Manual 33.9"  860mm
Longitudinal (X Axis) - Auto (opt.) 31.5"  800mm
Cross (Y Axis) - Manual 11.8"  300mm
Vertical (Z Axis) - Manual 15.7"  400mm
Ram  18.5"  470mm
Quill 5"  127mm
Head Tilt (front or back) 45°
Head Tilt (left or right) 90 0
SPINDLE
Spindle Motor  3 HP
Amp. Draw 208V 10
Amp. Draw 230V 10
Amp. Draw 460V 5
Spindle speed (rpm) 50HZ 50 - 3550
Spindle speed (rpm) 60HZ 60 - 4300
Low range (rpm) 50HZ 50 - 410
Low range (rpm) 60HZ 50 - 500
High range (rpm) 50HZ 455 - 3550
High range (rpm) 60HZ 550 - 4300
Spindle Taper R8 / NT30
Spindle Bearing CP 4
Quill Feed in/revolution .0015/.0031/.006
Quill Feed mm/revolution 0.04/0.08/0.15
Quill Dia. 3.38"
  86mm
CONTRUCTION and WEIGHT
Over Height 85.43"  2170mm
Over Depth 74.80"  1900mm
Over Width 68.50"  1740mm
Column Turret Diameter 14.96"  380mm
Knee Width 11.81"  300mm
Column Bearing Length 16.93"  430mm
Saddle/Table Bearing Length 19.89"  505mm
Ram/Turret Bearing Length 19.29"  490mm
Ram Length 32.87"  835mm
Halogen Work Light  24V / 70W
Coolant pump  180L - 1/8 HP
Machine Net Weight   lbs/kgs 2200 / 1000 

 

 

 

Birmingham BPS-1054 Knee Mill

BIRMINGHAM  BPS - 1054 MILLING MACHINE

Knee  Type  Milling  Machine  ( Step  Pulley)
  • 10" x 54"  Hardened & Ground  Work  Table
  • High  Grade  Meehanite  Casting
  • Class  7  Precision  Spindle  Bearings
  • Box  Ways  on  Y  Axis
  • Dovetail  on  X & Z  Ways
  • Hardened & Ground  On  X & Y  Axis  Slide  Ways   
  • Hardened  &  Ground  Work  Table  with  Tee  Slots
  • 3  HP, 220  Volt / 440  Volt / 3  PH  or  1  PH  Available
  • R-8  Spindle
  • Turcite  "B"  On  Saddle  Square  Way ( Y Axis ) on  Variable  Speed  Models
  • Hardened  &  Ground  Chrome  Quill
  • Quill  Travel: 5"
  • 800  lb  Table  Load  Capacity
  • Tilting  &  Rotating  Head
  • Hand  &  Power  Spindle  Feeds

**VERTICAL MILLING MACHINE: TAIWAN MADE HEAD

Additional Features:

  • Class 7 Spindle
  • R-8 Spindle
  • Chromed Quill
  • Certified Meehanite Castings
  • Turcite B on Female Surfaces
  • 10" x 54" Table
  • Easy to Read Dials
  • One Shot Lubrication
  • Dove Tail Ways Table and Knee
  • Square Ways on Saddle
  • Hardened and Ground Table
  • Hardened and Ground X and Y Slideways
  • Dual Table Locks
  • Dual Knee Locks
  • Coolant Ready Base

Standard Equipment

  • Tool box 1 set
  • Front chip guard 1 pc.
  • Rear chip guard 1pc.
  • Draw bar 1 pc.
  • One shot lube
Specifications
Table Size 10 x 54 inch
Table load capacity 800 lbs.
Table T-slot size 5/8 x 3 inch
Longitudinal travel hand only 38 inch
Longitudinal travel w/power feed 34 1/4 inch
Cross travel 18 inch
Vertical travel 18 inch
Ram travel 18 inch
Quill travel 5 inch
Spindle taper R8
Head swivel RH.LH 90/90 degree
Head tilting f/b 45/45 degree
Ram turret swivel 360 degree
Spindle motor 3 hp 3ph (2 hp 1ph 8 speeds)
Spindle speeds type step pulley
Spindle speeds (rpm) 90-5600 (16 speeds)
90-2800 (8 speeds) 1 Phase Units
Net weight 3500 lbs
A x B x C 89 x 81 x 72 inch

 

BPV-1054-C Birmingham Variable Speed Knee Milling Machine

BIRMINGHAM  BPV - 1054 / BPV - 1054F*

Knee  Type  Milling  Machine  (Variable  Speed )
  • 10" x 54"  Hardened & Ground  Work  Table
  • High  Grade  Meehanite  Casting
  • Class  7  Precision  Spindle  Bearings
  • Box  Ways  on  Y  Axis
  • Dovetail  on  X & Z  Ways
  • Hardened & Ground  On  X & Y  Axis  Slide  Ways   
  • Hardened  &  Ground  Work  Table  with  Tee  Slots
  • 3  HP, 220  Volt / 440  Volt / 3  PH  or  1  PH  Available
  • R-8  Spindle
  • Turcite  "B"  On  Saddle  Square  Way ( Y Axis ) on  Variable  Speed  Models
  • Hardened  &  Ground  Chrome  Quill
  • Quill  Travel: 5"
  • 700  lb  Table  Load  Capacity
  • Tilting  &  Rotating  Head
  • Hand  &  Power  Spindle  Feeds
  • Japanese  * YASKAWA  Inverter  Drive  on  BPV - 1054F *  Variable  Speed

Standard Features:

  • - High quality Taiwan-made milling head
  • - Super strong column and base
  • - Low maintenance machines
  • - High precision leadscrews
  • - Satin chrome finished dials
  • - Built-in coolant column base
  • - Double knee and table locks
  • - Ram equipped w/ double locks
  • - Large diameter quill is chromed
  • - One-piece quill pinion and shaft
  • - Spindle head is internally cooled
  • - Hardened & ground ways
  • - Heavy-duty motor 3 phase or 1 phase
  • - High precision class 7 spindle bearings
  • - Three-stage power downfeed w/ auto stop
  • - One year warranty and 2nd year extended

Standard Equipment:

  • - Tool box 1 set
  • - Front Chip Guard 1 pc
  • - Rear Chip Guard 1 pc
  • - Draw Bar 1 pc
  • - One Shot Lube
Specifications
Table Size 10 x 54 inch
Table load capacity 800 lbs.
Table T-slot size 5/8 x 3 inch
Longitudinal travel hand only 38 inch
Longitudinal travel w/power feed 34 1/2 inch
Cross travel 18 inch
Vertical travel 18 inch
Ram travel 18 inch
Quill travel 5 inch
Spindle taper R8
Head swivel RH.LH 90/90 degree
Head tilting f/b 45/45 degree
Ram turret swivel 360 degree
Spindle motor 3 hp 3ph ONLY
Spindle speeds type vari-speed/EVS
Spindle speeds (rpm) BPV-60-4300 (var)
BPV-F 65-5000 (EVS)
Net weight 3600 lbs
A x B x C 89 x 81 x 72 inch
SPECIFICATIONS BPV-1054 (3VS)
Table Size 10" x  54"  
  254 x 1370mm
Table Load Capacity 880 lbs.
  400 kgs
Number of T-Slots 3
T-Slots Width 0.63"  16mm
T-Slot Center Distance 2.48"  63mm
Table Ways (X Axis) Dovetail
Bed Ways (Y Axis) Square
Column Ways (Z Axis) Dovetail
Longitudinal (X Axis) - Manual 36.2"  920mm
Longitudinal (X Axis) - Auto (opt.) 33.5"  850mm
Cross (Y Axis) - Manual 15.8"  400mm
Vertical (Z Axis) - Manual 17.7"  450mm
Ram  20.5"  520mm
Quill 5"  127mm
Head Tilt (front or back) 45°
Head Tilt (left or right) 90 0
Spindle Motor  3 HP 
Amp. Draw 208V 10
Amp. Draw 230V 10
Amp. Draw 460V 5
Spindle speed (rpm) 50HZ 50 - 3550
Spindle speed (rpm) 60HZ 60 - 4300
Low range (rpm) 50HZ 50 - 410
Low range (rpm) 60HZ 50 - 500
High range (rpm) 50HZ 455 - 3550
High range (rpm) 60HZ 550 - 4300
Spindle Taper R8 / NT30
Spindle Bearing CP 4
Quill Feed in/revolution .0015/.0031/.006
Quill Feed mm/revolution 0.04/0.08/0.15
Quill Dia. 3.38"
  86mm
Over Height 90.55"  2300mm
Over Depth 70.87"  1800mm
Over Width 73.62"  1870mm
Column Turret Diameter 16.33"  415mm
Knee Width 14.17"  360mm
Column Bearing Length 18.11"  460mm
Saddle/Table Bearing Length 20.47"  520mm
Ram/Turret Bearing Length 17.32"  440mm
Ram Length 32.87"  835mm
Halogen Work Light  24V / 70W
Coolant pump  150L - 1/8 HP
Machine Net Weight   lbs/kgs 2865 / 1300 

 

BPV-4KV Birmingham Knee Mills

Knee  Type  Milling  Machine  ( Variable  Speed )

  • 10" x 54"  Hardened & Ground  Work  Table
  • 5  HP  Heavy  Duty  Variable  Speed  Head
  • Hardened  &  Ground  Ways  & T-Slots
  • ISO  40  Spindle
  • Class  7  Spindle  Bearings
  • Chromed  Precision  Ground  Quill
  • 800  Lb  Table  Load  Capacity
  • Universal  Ram  Adapter  with  45*  ( degree )  Tilt
  • Square  Ways  On  Column  And  Knee
  • Turcite  "B"  Coating  on  X-Y  Axis
  • Chromed  Satin  Dials
  • Built  in  Coolant  Return
  • Dual  Saddle  And  Knee  Locks
  • Quill  Travel  5"

**VERTICAL MILLING MACHINE: TAIWAN MADE HEAD

Standard Accessories:

  • Tool box 1 set
  • Front chip guard
  • Rear chip guard
  • Draw bar
  • Electric box
  • Control panel
  • Base coolant drop pan
  • One shot lube

Now if you need more ponies and a beefier spindle then this is the machine to consider. 5 HP, and a big 40 taper spindle.

Features:

  • 5 HP (3 phase)
  • Variable Speeds
  • Class 7 spindle bearings
  • Square box ways for Y & Vertical axes
  • Hardened and ground X & Y ways
  • Hardended and ground table and T slots
  • Turcite B on ways for smooth movement
  • Dual saddle locks
  • Dual knee locks
  • Large easy to read chrome satin dials
  • Spindle speeds 60-4300 RPM
  • Spindle taper - ISO# 40
  • Net weight - 3,700 lbs.

Standard Accessories: 

  • Box Y & Vertical axes ways 
  • Hardened & ground ways (X & Y) 
  • Chromed quill-honed head 
  • Drawbar/service wrench 
  • Electrical box and control cabinet 
  • Built-in coolant system with lower tray on base 
  • Hardened & ground table 
  • Coolant sump in column 
  • Coolant drain in base 
  • Front & rear chip guard 
  • Double knee locks-ratchet style 
  • Chromed turn-in-the hand handles 
  • Operation/service manual 
  • MEEHANITE CASTINGS

Standard Equipment:

  • - Tool box 1 set
  • - Front Chip Guard 1 pc
  • - Rear Chip Guard 1 pc
  • - Draw Bar 1 pc
  • - One Shot Lube
Specifications
Model BPV-4KV BPV-4KVF
Table Size 10 x 54 inch (Opt. 10 x 60 inch) 10 x 54 inch (Opt. 10 x 60 inch)
Table Load Capacity 800 lbs 800 lbs
Table T-Slot Size 16mm x 3 16mm x 3
Longitudinal Traverse Hand Only 36 inch (42 inch) 36 inch (42 inch)
Longitudinal Traverse Power Feed 32 1/4 inch (38 inch) 32 1/4 inch (38 inch)
Cross Travel 17 inch 17 inch
Vertical Trabel 17 inch 17 inch
Ram Trabel 18 inch 18 inch
Quill Feed Speeds 0.0015, 0.003, 0.006 inch / Rev 0.0015, 0.003, 0.006 inch / Rev
Quill Travel 5 inch 5 inch
Spindle Taper NT / CAT 40 NT / CAT 40
Quill Diameter 105 mm (4.13 inch) 105 mm (4.13 inch)
Head Swivel RH/LH 90 / 90 degree 90 / 90 degree
Head Tilting F/B 45 / 45 degree 45 / 45 degree
Ram Turret Swivel 360 degree 360 degree
Spindle Motor 5 HP 5 HP
Spindle Speeds Type Mechanical Variable Inverter Variable
Spindle Speeds (rpm) 60-4300 (Var.) 65-5000 (Var)
Net Weight 3700 lbs 3700 lbs
Dimensions 90 1/2 x 81 x 72 inch 90 1/2 x 81 x 72 inch

 

BPS-1649
9 X 49 TABLE, 16 SPEED ,R8, 3HP, 3P
CALL 800-458-3687 X 1 OR EMAIL FOR CURRENT PRICE & AVAILABILITY
Mfg. item #: BPS-1649
CPTBPS-1649
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

1467
BPS-1649-{04
CUPKG}9 X 49 TABLE, 16 SPEED ,R8, 3
CALL 800-458-3687 X 1 OR EMAIL FOR CURRENT PRICE & AVAILABILITY
Mfg. item #: BPS-1649-{04
CPTBPS-1649-{04
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

1467
BPV-3949
9 X 49 TABLE, VARI-SPEED, R8, 3HP,
CALL 800-458-3687 X 1 OR EMAIL FOR CURRENT PRICE & AVAILABILITY
Mfg. item #: BPV-3949
CPTBPV-3949
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

1467
BPV-3949-{04
CUPKG}9 X 49 TABLE, VARI-SPEED, R8,
CALL 800-458-3687 X 1 OR EMAIL FOR CURRENT PRICE & AVAILABILITY
Mfg. item #: BPV-3949-{04
CPTBPV-3949-{04
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

1467
BPS-1054
10 X 54TABLE, 16 SPEED Y,Z SQUARE W
CALL 800-458-3687 X 1 OR EMAIL FOR CURRENT PRICE & AVAILABILITY
Mfg. item #: BPS-1054
CPTBPS-1054
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

1467
BPS-1054-{04
CUPKG}10 X 54TABLE, 16 SPEED Y,Z SQ
CALL 800-458-3687 X 1 OR EMAIL FOR CURRENT PRICE & AVAILABILITY
Mfg. item #: BPS-1054-{04
CPTBPS-1054-{04
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

1467
BPV-1054
10 X 54TABLE ,VARI- SPEED Y,Z SQUAR
CALL 800-458-3687 X 1 OR EMAIL FOR CURRENT PRICE & AVAILABILITY
Mfg. item #: BPV-1054
CPTBPV-1054
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

1467
BPV-1054-{04
CUPKG}10 X 54TABLE ,VARI- SPEED Y,Z
CALL 800-458-3687 X 1 OR EMAIL FOR CURRENT PRICE & AVAILABILITY
Mfg. item #: BPV-1054-{04
CPTBPV-1054-{04
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

1467
BPV-4KV
10 X 54TABLE ,VARI- SPEED Y,Z SQUAR
CALL 800-458-3687 X 1 OR EMAIL FOR CURRENT PRICE & AVAILABILITY
Mfg. item #: BPV-4KV
CPTBPV-4KV
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

1467
BPV-4KV-C{04
UPKG}10 X 54TABLE ,VARI- SPEED Y,Z
CALL 800-458-3687 X 1 OR EMAIL FOR CURRENT PRICE & AVAILABILITY
Mfg. item #: BPV-4KV-C{04
CPTBPV-4KV-C{04
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

1467
VOLTAGE
VOLTAGE CHANGE FROM 3 PHAE TO 1 PHA
CALL 800-458-3687 X 1 OR EMAIL FOR CURRENT PRICE & AVAILABILITY
Mfg. item #: VOLTAGE
CPTVOLTAGE
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

1467
UN-949
MILLING MACHINE UNIX 2X AXIS DIGIT
CALL 800-458-3687 X 1 OR EMAIL FOR CURRENT PRICE & AVAILABILITY
Mfg. item #: UN-949
CPTUN-949
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

1467
HQ-R8E
( R8 SPINDLE ) POWER AIR DRAW BAR -
CALL 800-458-3687 X 1 OR EMAIL FOR CURRENT PRICE & AVAILABILITY
Mfg. item #: HQ-R8E
CPTHQ-R8E
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

1467
FLD-COOL
COOLANT SYSTEM W/CHIP TRAY - FACTOR
CALL 800-458-3687 X 1 OR EMAIL FOR CURRENT PRICE & AVAILABILITY
Mfg. item #: FLD-COOL
CPTFLD-COOL
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

1467
NW-1054-3Q
NEWALL DRO 3 AXIS (DP700)?(QUILL)
CALL 800-458-3687 X 1 OR EMAIL FOR CURRENT PRICE & AVAILABILITY
Mfg. item #: NW-1054-3Q
CPTNW-1054-3Q
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

1467
NW-1054-3K
NEWALL DRO 3 AXIS (DP700)?(KNEE)
CALL 800-458-3687 X 1 OR EMAIL FOR CURRENT PRICE & AVAILABILITY
Mfg. item #: NW-1054-3K
CPTNW-1054-3K
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

1467
HQ-40E
( HQ-40 / # 40 SPINDLE ) POWER AIR
CALL 800-458-3687 X 1 OR EMAIL FOR CURRENT PRICE & AVAILABILITY
Mfg. item #: HQ-40E
CPTHQ-40E
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

1467
HLT
HALOGEN WORK LIGHT - 110V
CALL 800-458-3687 X 1 OR EMAIL FOR CURRENT PRICE & AVAILABILITY
Mfg. item #: HLT
CPTHLT
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

1467
AV-6
6 MILLING VISE
CALL 800-458-3687 X 1 OR EMAIL FOR CURRENT PRICE & AVAILABILITY
Mfg. item #: AV-6
CPTAV-6
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

1467
R-8
11PC R-8 COLLET SET
CALL 800-458-3687 X 1 OR EMAIL FOR CURRENT PRICE & AVAILABILITY
Mfg. item #: R-8
CPTR-8
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

1467
PF-150X
POWER FEED X-AXIS - FACTORY INSTALL
CALL 800-458-3687 X 1 OR EMAIL FOR CURRENT PRICE & AVAILABILITY
Mfg. item #: PF-150X
CPTPF-150X
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

1467
PF-150Y
POWER FEED Y AXIS (CROSS) - FACTORY
CALL 800-458-3687 X 1 OR EMAIL FOR CURRENT PRICE & AVAILABILITY
Mfg. item #: PF-150Y
CPTPF-150Y
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

1467
PF-150Z
POWER FEED Z AXIS (KNEE) - FACTORY
CALL 800-458-3687 X 1 OR EMAIL FOR CURRENT PRICE & AVAILABILITY
Mfg. item #: PF-150Z
CPTPF-150Z
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

1467
Copyright © 2025 Smith-Hamilton, Inc
0.020 230321 09:23