601
Call 866-203-4781 or  Email us!

Birmingham YCL-1440-GH Lathe

Features

  • 3 HP main motor
  • No change gears requires
  • 16 speeds from 45-1800 rpm
  • D1-4 spindle with 1 1/2 inch bore
  • 40 kinds of inch threads from 4-112 tpi
  • Removable gaop bed for large diam. work
  • Magnetic controls and spindle foot brake
  • T-slotted compound and front pull-out chip tray
  • Main spindle hardened and precision ground
  • Bed made of fine grain high tensile cast iron
  • Bedways induction hardened and precision ground
  • All gears & shafts hardened and precision ground
  • Main spindle supported at 3-point by precision bearings

NOTE: 220V / 1 Phase motors comes only in 8 Speed - 220V / 3 Phase is 16 Speed

Standard Features

  • Follow rest
  • 12 inch face plate
  • 3 3/4 inch steady rest
  • 6 inch 3-jaw chuck
  • 8 inch 4-jaw chuck
  • Operation and parts manual
  • Coolant system
  • Halogen work light
  • Removable gap
  • 4-way tool post
  • Thread chasing dial
  • Front pull-out chip tray
  • Centers and reducing sleeve
  • Tool kit with tools and leveling pads
  • Full length foot brake
  • Full length splash guard
  • All inch/mm dual dials
  • Spindle jog button control
Specifications
Capacities
Max. swing over bed 14 inch
Distance between centers 40 inch
Max. swing over cross slide 8 5/8 inch
Effective length in gap 6 1/4 inch
Width of bed 8 1/8 inch
Headstock
Spindle nose (spindle mount) D1-4
Diam. of spindle thru bore 1 1/2 inch
Spindle taper (with sleeve) M.T. 5 (M.T. 3)
Spindle speeds 45-1800rpm, 16 steps- 45,70, 90, 108, 140, 165, 215, 255, 330, 385, 510, 585, 770, 900, 1170, 1800, rpm    (1 phase 90 - 1800 RPM)
Feeds & Threads  
Longitudinal Feeds 0.0012-0.0294 inch/ REV. (40 kinds)
Cross feeds 0.0003-0.01 inch Rev. (40 kinds)
Inch threads 4-112 tpi (40 kinds)
Metric threads 0.45-7.5 mm (22 kinds)
Diam. of long leadscrew 7/8 inch
Pitch threads of long leadscrew 8 tpi
Carriage
Max. travel of cross slide 7 inch
Max. travel of compound slide 4 inch
Max. tool size 5/8 x 5/8 inch
Tailstock
Diam. of tailstock quill 2 3/4 inch
Taper of tailstock quill center M.T. 3
Max. travel of tailstock quill 4 3/4 inch
Motors
Power of main motor 3HP, 220V 3 PH, 2 speed
Power of coolant pump 1/8 HP, 220V, 3 PH
Overall Dim. (l x w x h) 72 x 31 x 49 inch
Net weight lbs 2000

 

Birmingham YCL-1440 Lathes & Accessories
YCL-1440GH-3 14X40 inch D1-4, 16SPD, 1-1/2 inch BORE, 3HP,220V, 1PH
YCL-1440GH-1 14X40 inch D1-4, 16SPD, 1-1/2 inch BORE, 3HP,220V, 3PH
CPTDRO DIGITAL READOUT:  NEWALL C-80  OR  ACU-RITE  OR  UNIQ IMPORT" (( Call 1-800-458-3687 For Price on all DRO's ))
HALOGEN WORK LIGHT HALOGEN WORK LIGHT
MCS-1 MICRO CARRIAGE STOP
11 FACE PLATE-CT-1440G 11 inch FACE PLATE FOR CT-1440G
R-CFO 5C COLLET CHUCK ( FRONT OPERATE ) D1-4 MOUNT
YCL-CS COOLANT SYSTEM WITH TANK
TA-340/1440 TAPER ATTACHMENT ( FREE INSTALLATION )

1236GH_sm.gif
Copyright © 2025 Smith-Hamilton, Inc
0.002 200319 08:51