Model 960-251 2.5 x 60 Two Wheel Wet Belt Grinder

Ideal for lapidary, glass, and other finishing applications optimized by diamond abrasives With diamond belts and the model 960-401 you will experience up to 100 times the life of expectancy of silicon carbide abrasives while attaining vastly superior results.

Standard 60" belt 2 1/2" wide. Also available is 4000 FilterPAK, stainless steel tank with filter.

• 5000 or Variable-Speed surface feet per minute to optimize modern diamond abrasives
• 2.5 x 60 inch belt track
• Integrated water fed system including pump, water flow adjusting valve, dual 120 degree spray nozzles, stainless steel water receiver tray with drain, sump, and interconnecting flexible tubes
• 1HP NEMA 4x motor and switch for wet application
• Ground fault interrupter power distribution "rain" box with master switch for the grinder and feeder pump for maximum safety in wet grinding modes
• Cast aluminum frame for Burr King ruggedness
• Safe belt track guarding that is OSHA compliant
• Bearings are high quality and sealed for life
• Belt change is quick with a linear belt tension device
• Belt tracking is simple and effective
• Work position is adjustable from horizontal to vertical
• Platen is full belt and generously long
• Contact wheel, slack, or platen grinding
• Dry grinding is as simple as turning off the pump
• One year, limited warranty
• Made in the USA

Click on Part Number in Chart Below to be Directed Below for Pricing

Model 960-251 2 1/2" x 60" two Wheel "WET" Belt Grinder
31010	960-251 2.5X60/1HP/120V/1PH/FS	NEMA4/FLUID SYS./60HZ/W-PED
31020	960-251 2.5X60/1HP/220V/1PH/FS	NEMA4/FLUID SYS./60HZ/W-PED
31030	960-251 2.5X60/1HP/120V/1PH/VS	NEMA4/FLUID SYS./50-60HZ/W-PED
31040	960-251 2.5X60/1HP/220V/1PH/VS	NEMA4/FLUID SYS./50-60HZ/W-PED

Model 960-250 E-Catalog

Instruction Manual

Schematic

Foot Print