chat now with southern tool
Technical Sales 1–800–458–3687

PowerMatic DS20 Disc Sander

20-Inch Industrial Duty Disc Sander/Grinderused for metal, wood, fiberglass and plastics is available in 115 Volt, Single Phase; 230 Volt Single Phase; 230 Volt Three Phase and 460 Volt, Three Phase with optional Dust Shroud  weighing 370 pounds crated:

Baldor Motor, 2 HP; 230 Volt/460 Volt (5.6/2.8 amps); 60 cycle; 1,740 RPM:

  • 32” X 30” Footprint
  • 27.25” X 15” Working Table.
  • 37.5” Working Height.
  • 20-Inch Disc Size.
  • 45 Degree Down Tilt, 35 Degree Up Tilt
  • Dayton On/Off Reversing Switch
  • Direct Drive.
  • Finely machined and dynamically balanced 5/8” Aluminum disc for vibration free operation & elimination of :”Fly-Off”.
  • Rack Mechanism for lowering table.
  • Table lowers to bottom of disc for easy access.
  • Options include 1.5 HP; 115 Volt/230 Volt(18/8 amps; 60 cycle-1740 RPM, Three phase; DYNAMIC BRAKE ON MOTOR FOR INSTANT STOP AND REVERSE.

Why a Conquest 20" Disc Grinder & Sander?                        

  • Manufactured In The USA.
  • Simple to Operate.
  • Low Sound Emission.
  • Tilt Up/Tilt Down Table.
  • Powder Coated Fabricated Surfaces.
  • Powered By BALDOR Motor.
  • Equipped With a Dayton "On-Off" Reversing Switch.
  • Finely Machined & Dynamically Balanced Aluminum Grinding Disc for Vibration Free Operation and Elimination of Disc "Fly Off".
  • Used for Metal, Wood, Fiberglass and Plastic.
  • Miter Gauge Standard.

20" Heavy Duty Disc Grinder & Sander - Features & Specifications

  • Disc size = 20"
  • Bolt-down base
  • Working table = 27.25" x 15"
  • Working height = 37.5"
  • Motor = 2 HP - 230/460V [5.8/2.8 Amps] 60 cycle 1740 rpm - Three Phase
  • Direct motor drive 
  • Table can be tilted 35° upward and 45° downward
  • Rack mechanism for raising & lowering table 32" x 30" floor space required

Options

  • Removable Dust Collection Shroud for Disc.
  • Motor = 1.5 HP 115/230V [18/8 Amps] 60 cycle 1725 rpm - Single Phase.
  • Motor = 3 HP 230/460V [8/4 Amps] 60 cycle 1740 rpm - Three Phase.
  • Dynamic Brake on Motor.

 

20" SINGLE PHASE
NOTE:  Single Phase Units Can Be Wired For 115V or 230V, All Single Phase Machines Shipped 230V If Not Otherwise Specified
 
DG201 20" Disc Sander/Grinder
  1.5 hp, 115V, S. Ph. (18 Amps) 60 Cycle, 1725 RPM
   
DG202 20" Disc Sander/Grinder
  1.5 hp, 230V, S. Ph. (8 Amps) 60 Cycle, 1725 RPM
   
20" THREE PHASE  
NOTE:  3 Phase Units Can Be Wired For 230V or 460V, All 3 Phase Machines Shipped 230V If Not Otherwise Specified
3 Phase Units Originally Ordered & Shipped As 230V Will Require An On/Off Switch Upgrade For Wiring Change To 460V
   
DG203 20" Disc Sander/Grinder
  2 hp, 230V, 3 Ph. (5.6 Amps) 60 Cycle, 1740 RPM
   
DG204 20" Disc Sander/Grinder
  2 hp, 460V, 3 Ph. (4 Amps) 60 Cycle, 1740 RPM
   
OPTIONS, 20" (add to price of machine)  
     
DUST CHUTE DG-ADG010 (4" Port)
3 HP MOTOR DG MOTO737
  3 hp, 230/460V, 3 Ph. (8/4 Amps) 60 Cycle, 1740 RPM
BRAKE (S. PH.) DG-MOTO731BM, DYNAMIC MOTOR BRAKE
  (3 PH.) DG-MOTO736BM, DYNAMIC MOTOR BRAKE
WOOD CRATE SHIPPED STANDARD ON PALLET COVERED WITH
IF REQUIRED CARD BOARD BOX (IF WOOD CRATE NOT SPECIFIED)

Click here to downlaid a spec sheet

 

Click Below for a Munual

1791276 Manual

Copyright © 2018 Smith-Hamilton, Inc
0.003 150419 18:39