Technical Sales 1–800–458–3687

DAKE SE Series Stationary Mitering Bandsaws

Click here to download manual

Stationary Mitering Bandsaws

Heavy duty, dual mitering saw that comes with one standard Bi-metal blade. Hydraulic controlled downfeed with automatic shut off at the end of the cut. 2.75HP, 220V motor with up to 60°right mitering capabilities. Dual operating modes with head descent control lock switch. Pre-set the down feed and shut switch so down feed does not need resetting after each cut.

Warning: This product contains Nickel, a chemical known to the State of California to cause cancer. For more information go to

Features:

  • Hydraulic controlled down feed with adjustable manual return
  • Automatic shut off at the end of the cut
  • Dual operating modes with head descent control lock switch. Pre-set the down feed and shut switch so down feed does not need resetting after each cut
  • Powerful, flame tempered, manual clamping vise. Hand wheel adjusted with quick release lever for rapid vise opening and closing action. The vise clamps material firmly
  • Traversing vise can be used left or right of the blade
  • Ergonomic designed for operator’s comfort and control
  • Gearbox is direct bolted to the bow for less vibration, and positive drive gear box is direct driven via steel and bronze gears, no belts and pulleys to contend with
  • CE Certified electronics. Low voltage switches. Thermo over load protection, low voltage protection with low voltage trigger motor start switch and blade cover interlock
  • Blade tensioning is done via. A hand wheel and color coded gauge tensioning system taking the guesswork out of tensioning
  • Miters up to 60° right / 45° left. Mitering pre-sets with flip up and pin stops makes set up fast and has precise with miter scale for all angles in between. The head turns-the material doesn’t
  • Horizontally mounted guide arms for more rigidity and straightest cuts. Guides are rollers with carbide inserts that are fully adjustable and replaceable
  • Electric coolant pump and self-contained coolant system
  • Steel fabricated base, and stock stop gauge

Standard Equipment

  • Steel base
  • 1 standard bi-metal blade
  • Traversing, manual vise
  • Coolant
  • Stock stop gauge
Models and Accessories
983110-1 Model: SE-6.5 M - Hydraulic controlled feed 7" horizontal mitering bandsaw 120-V - Horizontal Pedestal Stationary Bandsaws
983112-2 Model: SE-10 DM - Hydraulic controlled 10 dual mitering bandsaw 220-volt 3 phase - Horizontal Pedestal Stationary Bandsaws
300674 440 Volt Transformer

 

Specifications
Model Number SE 10 DM SE 8.5 M SE 6.5 M
Part Number 983112-2 983111-2 983110-1
Capacity 10" Round 8 1/2" Round 6.5" Round
Horsepower 2.75 1.75 2.5
Voltage 220V 3 phase 220V 3 Phase 120 V
Maximum blade speed 230 FPM 230 FPM Variable
Blade width (in) 1 1 3/4
Blade length (in) 108 101 84 1/4
Blade speed 115-230 FPM 114-230 FPM 114-262 FPM
Solid round 90 deg capacity (in) 10 8 1/2 6.5
Solid round 45 deg right capacity (in) 8 6 3/4 4 1/4
Solid round 60 deg right capacity (in) 5 4 1/4 3
Solid square 90 deg capacity (in) 7 1/2 7 3/4 6 3/4
Solid square 45 deg right capacity (in) 7 1/2 / 6 3/4 6 3/4 4 1/2
Solid square 60 deg right capacity (in) 5" 4 1/4" 3"
Solid rectangle 90 deg capacity (in) 10 1/2" x 7 3/4" 10 3/8 x 7 3/4" 7 3/4 x 3"
Solid rectangle 45 deg right capacity (in) 8 1/4" x 3 1/8" 7 3/4" x 6 1/4" 6 x 4 1/4"
Solid rectangle 60 deg right capacity (in) 4 3/4" x 5 1/4" 4 1/2" x 4" 4 x 2 3/4"
Worktable height (in) 37 37 37
Height (in) 74 71 65
Floor space (in) 28 x 66 33"x 58 35 x 48
Floor space left to right (in) 28 x 66 33 x 58 35 x 48
Floor space front to back (in) 28 x 66 33 x 58 35 x 48

 

No accessories listed

983110-1
MODEL SE-6.5 M - HYDRAULIC CONTROLL
Mfg. item #: 983110-1
DAKE983110-1
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

490
983112-2
DAKE MODEL SE-10 DM - HYDRAULIC CONTROLLED 10"DUAL MITERING BANDSAW 220-VOLT 3 PH
Mfg. item #: 983112-2
DAKE983112-2
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

24
300674
TRANSFORMER 440 VOLT TRANSFORMER
Mfg. item #: 300674
DAKE300674
Call for freight quote on this item or we will confirm freight charges before shipping.1
$894.88

24
Copyright © 2023 Smith-Hamilton, Inc
0.004 230817 09:45