Technical Sales 1–800–458–3687

DAKE Euromatic 370PP & 370PP-L Fully Aut

 

 

AUTOMATIC COLD SAWS
976208-2 Euro 370 PP Automatic Cold Saw, Ferrous Head, 220v-3 ph (add $940 for 440v)
976210-2 Euro 370 PP-L Automatic Cold Saw, Non-Ferrous Head, 220v-3 ph (add $940 for 440v)
COLD SAW ACCESSORIES
300674 Transformer 440 Volt Transformer
AAL3100L AAL3100L Pneumatic Vise Models 315 - Factory Installed
AAL3100L AAL3100L Pneumatic Vise Models 315 - For Field Installation
79827 79827 Pneumatic Vise Model 350 CE - Factory Installed
300128 300128 Ferrous Cutting Head for Mounting on Non-Ferrous Saw
79917 79917 Non-Ferrous Cutting Head for Mounting on Ferrous Saw
301644 301644 78" Loading Table All Thomas Modesl In-bound with protective cover plates
301645 301645 78" Un-loading Table All Thomas Modesl Out-bound with scale and adjustable positive stop
716602 716602 60" Roller Table 301169    Transformer    575 Volt Transformer
     

 

Click here to download manual

Click here to download parts list

Automatic Cold Saws Model Euromatic 370PP  14.5" blade

The Euromatic 370PP Ferrous Automatic Cold Saw is user-friendly while offering aggressive precision and stamina. Featuring two removable surface wear plates, a head that rotates 45 deg right of center and up to 90 deg left of center.

440V model requires step-down transformer for operation (part number: 300674)

Warning: This product contains Nickel, a chemical known to the State of California to cause cancer

Features:

  • Head rotates 45 deg right of center for miter cutting and up to 90 deg left of center for miter cutting and slotting.
  • Table features two removable surface wear plates to support longer cut lengths.
  • Three gib guides for the cutting head with two adjustable cast iron gib blocks in each for increased cutting accuracy and easy adjustment.
  • Large automatic clamping vise features adjustable gib guides, removable face plates, and an anti-burr arm.
  • Minimum 6 inch remnant drop piece size for maximum material use.
  • Outboard section of the table is designed so shorter lengths tumble down a mesh discharge chute.
  • Manual oiler to lubricate 1 inch thick, hardened ways.
  • 3.5/4.5 HP motor has the muscle to drive a 14-1/2 or 12 inch blade quickly and quietly through solids.
  • Clear acrylic hood has shock assists for raising and lowering and electrical interlocks.
  • Swap cutting head to gain non-ferrous/ferrous option on same saw

Model Options:

  • Non-ferrous cutting head
  • Outbound unloading table
  • 575V Transformer
  • 60 inch Roller Table

Standard Equipment

  • Blade
  • Coolant
  • Saw blade selector calculator
  • Tools kit for changing blades
  • Instruction and service manual
Specifications
Model Number Euromatic 370PP
Voltage 220 volts/ 440 volts
Horsepower 3.5/4.5
Cutting Ability Ferrous / Non-ferrous / Plastic
Maximum blade diameter 14-1/2 inch
Maximum vise opening 8-1/4 inch
Maximum feed vise opening 6-1/2 inch
Maximum Angle 45 deg Left / 90 deg Right
Slotting Yes
Phase 3
Speeds 25/50 rpm
Weight 1,716 lbs
Solid round 90 deg capacity 4 inch
Solid round 45 deg capacity 3-5/8 inch
Tube 90 deg capacity 5-1/16 inch
Tube 45 deg capacity 5 inch
Square 90 deg capacity 4 inch
Square 45 deg capacity 3-7/8 inch
Rectangle 90 deg capacity 4 x 7 inch
Rectangle 45 deg capacity 4 x 6 inch
Work height 35 inch
Height 90 inch
Width 83 inch
Depth 54 inch

 

Click here to download manual

Click here to download parts list

Automatic Cold Saws Model Euromatic 370PP-L  14.5 inch blade

The Euromatic 370PP-L Non-Ferrous Automatic Cold Saw is user-friendly while offering aggressive precision and stamina. Featuring two removable surface wear plates, a head that rotates 45 deg right of center.

440V model requires step-down transformer for operation (part number: 300674)

Warning: This product contains Nickel, a chemical known to the State of California to cause cancer

Features:

  • Head rotates 45 deg right of center for miter cutting
  • Table features two removable surface wear plates to support longer cut lengths.
  • Three gib guides for the cutting head with two adjustable cast iron gib blocks in each for increased cutting accuracy and easy adjustment.
  • Rear surface of the gearbox is machined with interlocking circles to evenly distribute oil over the ways.
  • Large automatic clamping vise features adjustable gib guides, removable face plates, and an anti-burr arm.
  • Minimum 6 inch remnant drop piece size for maximum material use.
  • Outboard section of the table is designed so shorter lengths tumble down a mesh discharge chute.
  • Manual oiler to lubricate 1 inch thick, hardened ways.
  • 3.5/4.5 HP motor has the muscle to drive a 14-1/2 or 12 inch blade quickly and quietly through solids.
  • Clear acrylic hood has shock assists for raising and lowering and electrical interlocks.
  • Swap cutting head to gain non-ferrous/ferrous option on same saw

Model Options:

  • Ferrous cutting head
  • Outbound unloading table
  • 575V Transformer
  • 60 inch Roller Table

Standard Equipment:

  • Blade
  • Coolant
  • Saw blade selector calculator
  • Tools kit for changing blades
  • Instruction and service manual
Specifications
Model Number Euromatic 370PP-L
Voltage 220V/ 440V, 3 Phase
Horsepower 3.5/4.5
Cutting Ability Non-Ferrous/Plastic
Maximum blade diameter 14-1/2 inch
Maximum vise opening 8-1/4 v
Maximum feed vise opening 6-1/2 inch
Maximum Angle 45 deg left
Slotting No
Phase 3
Speeds 1500/3000 rpm
Weight 1,716 lbs
Solid round 90 deg capacity 4 inch
Solid round 45 deg capacity 3-5/8 inch
Tube 90 deg capacity 5-1/16 inch
Tube 45 deg capacity 5 inch
Square 90 deg capacity 4 inch
Square 45 deg capacity 3-7/8 inch
Rectangle 90 deg capacity 4 x 7 inch
Rectangle 45 deg capacity 4 x 6 inch
Work height 35 inch
Height 90 inch
Width 83 inch
Depth 54 inch

 

976208-2
DAKE MODEL EURO 370 PP - AUTOMATIC COLD SAW, FERROUS HEAD, 220V-3 PH (ADD $940 FOR 440V)
Mfg. item #: 976208-2
DAKE976208-2
Call for freight quote on this item or we will confirm freight charges before shipping.1
NEW ITEM
Call for Price

16
976210-2
DAKE MODEL EURO 370 PP-L - AUTOMATIC COLD SAW, NON-FERROUS HEAD, 220V-3 PH (ADD $940 FOR 440V)
Mfg. item #: 976210-2
DAKE976210-2
Call for freight quote on this item or we will confirm freight charges before shipping.1
NEW ITEM
Call for Price

16
300674
TRANSFORMER 440 VOLT TRANSFORMER
Mfg. item #: 300674
DAKE300674
Call for freight quote on this item or we will confirm freight charges before shipping.1
$894.88

16
AAL3100L
DAKE MODEL AAL3100L - PNEUMATIC VISE MODELS 315
Mfg. item #: AAL3100L
DAKEAAL3100L
Call for freight quote on this item or we will confirm freight charges before shipping.1
$2,089.64

16
79827
DAKE MODEL 79827 - PNEUMATIC VISE MODEL 350 CE
Mfg. item #: 79827
DAKE79827
Call for freight quote on this item or we will confirm freight charges before shipping.1
$2,070.60

16
300128
DAKE MODEL 300128 - FERROUS CUTTING HEAD FOR MOUNTING ON NON-FERROUS SAW
Mfg. item #: 300128
DAKE300128
lease to own for as little as:$252 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$12,601.15

16
79917
DAKE MODEL 79917 - NON-FERROUS CUTTING HEAD FOR MOUNTING ON FERROUS SAW
Mfg. item #: 79917
DAKE79917
lease to own for as little as:$85 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$4,255.81

16
301644
DAKE 78 LOADING TABLE ALL THOMAS MODESL IN-BOUND WITH PROTECTIVE COVER PLATES
Mfg. item #: 301644
DAKE301644
Call for freight quote on this item or we will confirm freight charges before shipping.1
$1,190.00

16
301645
DAKE 78 UN-LOADING TABLE ALL THOMAS MODESL OUT-BOUND WITH SCALE AND ADJUSTABLE POSITIVE STOP
Mfg. item #: 301645
DAKE301645
Call for freight quote on this item or we will confirm freight charges before shipping.1
$1,904.00

16
716602
DAKE 60 ROLLER TABLE
Mfg. item #: 716602
DAKE716602
Call for freight quote on this item or we will confirm freight charges before shipping.1
$471.24

16
Copyright © 2022 Smith-Hamilton, Inc
0.009 220726 13:22