Technical Sales 1–800–458–3687

DAKE Euromatic 370S, 370SA Semi Auto

TECHNICS 350SA

Euromatic 370S Ferrous

Euromatic 370S-L Non-Ferrous
 350SA Euromatic 370S Ferrous Euromatic 370S-L Non-Ferrous

 

SEMI-AUTOMATIC/FULLY AUTOMATIC COLD SAW
974355 Super 350 SA 14" Semi-Automatic Cold Saw, 220v-3 ph 3 speed (add $940 for 440v)
SEMI-AUTOMATIC COLD SAWS
976200-2 Euro 370 S Semi-Automatic Cold Saw, Ferrous Head, 220v-3 ph (add $940 for 440v)
976202-2 Euro 370 S-L Semi-Automatic Cold Saw, Non-Ferrous Head, 220v-3 ph (add $940 for 440v)
COLD SAW ACCESSORIES
300674 Transformer 440 Volt Transformer
AAL3100L AAL3100L Pneumatic Vise Models 315 - Factory Installed
AAL3100L AAL3100L Pneumatic Vise Models 315 - For Field Installation
79827 79827 Pneumatic Vise Model 350 CE - Factory Installed
300128 300128 Ferrous Cutting Head for Mounting on Non-Ferrous Saw
79917 79917 Non-Ferrous Cutting Head for Mounting on Ferrous Saw
301644 301644 78 inch Loading Table All Thomas Modesl In-bound with protective cover plates
301645 301645 78 inch Un-loading Table All Thomas Modesl Out-bound with scale and adjustable positive stop
716602 716602 60 inch Roller Table 301169    Transformer    575 Volt Transformer

 

TECHNICS 350SA

Click here to download manual

Click here to download parts list

Semi-Automatic Cold Saws
Model  350SA  14 inch blade

Semi-automatic cold saw that has a push-button or foot switch activation, an oversized pedestal base, shroud enclosed head feed cylinder, adjustable pneumatic vise. Variable speed controlled by a frequency inverter increases the material cutting range.

440V model requires step-down transformer for operation (part number: 300674)

Warning: This product contains Nickel, a chemical known to the State of California to cause cancer.

Features:

  • Push button or foot-switch activation to avoid operator fatigue.
  • Shroud enclosed head feed cylinder with sliding cams for fast cutting stroke adjustment.
  • Additional ball bearing support of hardened and ground spindle shaft to prevent failure.
  • Adjustable pneumatic vise with sliding gib to true up clamping under blade with 1/4 stroke.
  • Oversized pedestal base to reduce vibration.
  • Head rotates 45 deg right and 60 deg left of center for easy miter cutting.
  • Removable hardened, serrated vise jaw faces.
  • Ability to add a programmable feed system to make fully automatic with wide range of capabilities.

Standard Equipment

  • Blade
  • Coolant
  • Saw blade selector calculator
  • Tools kit for changing blades
  • Instruction and service manual
  • Adjustable positive stop

 

Specifications
Model Number  350SA
Voltage 220 V/440 V, 3-Phase
Horsepower 3.5 max
Cutting Ability Ferrous/Non-Ferrous/Plastic
Maximum blade diameter 14 inch
Maximum vise opening 6-5/8 inch
Maximum feed vise opening n/a
Maximum Angle 60 deg left/ 45 deg right
Slotting No
Phase 3
Speeds 20-105 rpm
Weight 890 lbs
Solid round 90 deg capacity 3-3/8 inch
Solid round 45 deg capacity 3 inch
Tube 90 deg capacity 4-3/4 inch
Tube 45 deg capacity 4 inch
Square 90 deg capacity 4-1/8 inch
Square 45 deg capacity 3-3/8 inch
Rectangle 90 deg capacity 6-1/4 x 3-1/2 inch
Rectangle 45 deg capacity 3-3/8 x 2-3/4 inch
Work height 36-3/4 inch
Height 60 inch
Width 33 inch
Depth 50 inch

 

Euromatic 370S Ferrous

Click here to download manual

Click here to download parts list

Semi-Automatic Cold Saws

Model Euromatic 370S Ferrous  14.5 inch blade

Semi-automatic ferrous saw that's user friendly for set up and operation. Featuring two removable surface wear plates, heads that rotate 45º and 90º left/right, three gib guides, a manual oiler, and a self-adjusting, metal chip brush.

440V model requires step-down transformer for operation (part number: 300674)

Warning: This product contains Nickel, a chemical known to the State of California to cause cancer

Features:

  • Head rotates 45 deg right of center for miter cutting and up to 90 deg left of center for miter cutting and slotting.
  • Outboard section of the table is designed so shorter lengths tumble down a mesh discharge chute.
  • Manual oiler to lubricate 1 inch thick, hardened vertical ways.
  • 3.5/4.5 HP motor has the muscle to drive a 14-1/2 inch or 12 inch blade quickly and quietly through solids.
  • Clear acrylic hood has shock assists for raising and lowering and electrical interlocks.
  • Table features two removable surface wear plates to support longer cut lengths.
  • Three gib guides for the cutting head with two adjustable cast iron gib blocks in each for increased cutting accuracy and easy adjustment.
  • Rear surface of the gearbox is machined with interlocking circles to evenly distribute oil over the ways.
  • Large automatic clamping vise features adjustable gib guides, removable face plates, and an anti-burr arm.
  • Self-adjusting, metal chip brush fills removable chip drawer.
  • Ability to add a programmable feed system to make fully automatic with wide range of capabilities.
  • Swap cutting head to gain non-ferrous/ferrous option on same saw

Model Options:

  • Ferrous or Non-Ferrous Cutting Head for mounting 
  • Loading table 
  • Unloading table 
  • 575V Transformer

Standard equipment

  • Blade
  • Coolant
  • Saw blade selector calculator
  • Tools kit for changing blades
  • Instruction and service manual
  • Adjustable positive stop

 

Specifications
Model Number Euromatic 370S Ferrous
Voltage 220 V/ 440 V, 3-phase
Horsepower 3.5/4.5
Cutting Ability Ferrous / Non-Ferrous / Plastic
Maximum blade diameter 14-1/2 inch
Maximum vise opening 8-3/4 inch
Maximum feed vise opening n/a
Maximum Angle 45° / 90° left / right
Slotting Yes
Phase 3
Speeds 25/50 rpm
Weight 1,360 lbs
Solid round 90 deg capacity 4-1/4 v
Solid round 45 deg capacity 3-5/8 inch
Tube 90 deg capacity 5-1/16 inch
Tube 45 deg capacity 5 inch
Square 90 deg capacity 4-1/4 inch
Square 45 deg capacity 3-7/8 inch
Rectangle 90 deg capacity 4 x 7 inch
Rectangle 45 deg capacity 4 x 6 inch
Work height 35 inch
Height 73 inch
Width 28 inch
Depth 39 inch

 

Euromatic 370S-L Non-Ferrous

Click here to download manual

Click here to download parts list

Semi-Automatic Cold Saws Model

Euromatic 370S-L Non-Ferrous  14.5 inch blade

Semi-automatic non-ferrous saw that's user friendly for set up and operation. Featuring two removable surface wear plates, heads that rotate 45 deg, three gib guides, and a manual oiler.

440V model requires step-down transformer for operation (part number: 300674)

Features:

  • Outboard section of the table is designed so shorter lengths tumble down a mesh discharge chute.
  • Manual oiler to lubricate 1 inch thick, hardened vertical ways.
  • 3.5/4.5 HP motor has the muscle to drive a 14-1/2 inch or 12 inch blade quickly and quietly through solids.
  • Clear acrylic hood has shock assists for raising and lowering and electrical interlocks.
  • Table features two removable surface wear plates to support longer cut lengths.
  • Three gib guides for the cutting head with two adjustable cast iron gib blocks in each for increased cutting accuracy and easy adjustment.
  • Rear surface of the gearbox is machined with interlocking circles to evenly distribute oil over the ways.
  • Large automatic clamping vise features adjustable gib guides, removable face plates, and an anti-burr arm.
  • Swap cutting head to gain non-ferrous/ferrous option on same saw
  • Ability to add a programmable feed system to make fully automatic with wide range of capabilities.

Model Options:

  • Ferrous or Non-Ferrous Cutting Head for mounting
  • Loading table
  • Unloading table
  • Roller table
  • 575V Transformer

Standard Equipment:

  • Blade
  • Coolant
  • Saw blade selector calculator
  • Tools kit for changing blades
  • Instruction and service manual
  • Adjustable positive stop
Specifications
Model Number Euromatic 370S-L Non-Ferrous
Voltage 220 V/440 V, 3-phase
Horsepower 3.5/4.5
Cutting Ability Non-Ferrous / Plastic
Maximum blade diameter 14-1/2 inch
Maximum vise opening 8-3/4 inch
Maximum feed vise opening n/a
Maximum Angle 45 deg left
Slotting No
Phase 3
Speeds 1,500/3,000 rpm
Weight 1,360 lbs
Solid round 90 deg capacity 4-1/4 inch
Solid round 45 deg capacity 3-5/8 inch
Tube 90 deg capacity 5-1/16 inch
Tube 45 deg capacity 5 inch
Square 90 deg capacity 4-1/4 inch
Square 45 deg capacity 3-7/8 inch
Rectangle 90 deg capacity 4 x 7 inch
Rectangle 45 deg capacity 4 x 6 inch
Work height 35 inch
Height 73 inch
Width 28 inch
Depth 39 inch

 

974355
MODEL: SUPER 350 SA , 14 SEMI-AUTOMATIC COLD SAW, 220V-3 PH 3 SPEED
Mfg. item #: 974355
DAKE974355
lease to own for as little as:$254 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$12,688.26

21
976200-2
MODEL: EURO 370 S , SEMI-AUTOMATIC COLD SAW, FERROUS HEAD, 220V-3 PH
Mfg. item #: 976200-2
DAKE976200-2
lease to own for as little as:$384 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$19,213.40

21
976202-2
MODEL: EURO 370 S-L , SEMI-AUTOMATIC COLD SAW, NON-FERROUS HEAD, 220V-3 PH
Mfg. item #: 976202-2
DAKE976202-2
lease to own for as little as:$384 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$19,213.40

21
300674
TRANSFORMER 440 VOLT TRANSFORMER
Mfg. item #: 300674
DAKE300674
Call for freight quote on this item or we will confirm freight charges before shipping.1
$894.88

111
AAL3100L
DAKE MODEL AAL3100L - PNEUMATIC VISE MODELS 315
Mfg. item #: AAL3100L
DAKEAAL3100L
Call for freight quote on this item or we will confirm freight charges before shipping.1
$2,089.64

111
79827
DAKE MODEL 79827 - PNEUMATIC VISE MODEL 350 CE
Mfg. item #: 79827
DAKE79827
Call for freight quote on this item or we will confirm freight charges before shipping.1
$2,070.60

111
300128
DAKE MODEL 300128 - FERROUS CUTTING HEAD FOR MOUNTING ON NON-FERROUS SAW
Mfg. item #: 300128
DAKE300128
lease to own for as little as:$252 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$12,601.15

111
79917
DAKE MODEL 79917 - NON-FERROUS CUTTING HEAD FOR MOUNTING ON FERROUS SAW
Mfg. item #: 79917
DAKE79917
lease to own for as little as:$85 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$4,255.81

111
301644
78 LOADING TABLE ALL THOMAS MODESL IN-BOUND WITH PROTECTIVE COVER PLATES
Mfg. item #: 301644
DAKE301644
Call for freight quote on this item or we will confirm freight charges before shipping.1
$1,149.43

21
301645
78 UN-LOADING TABLE ALL THOMAS MODESL OUT-BOUND WITH SCALE AND ADJUSTABLE POSITIVE STOP
Mfg. item #: 301645
DAKE301645
Call for freight quote on this item or we will confirm freight charges before shipping.1
$1,828.56

21
716602
DAKE 60 ROLLER TABLE
Mfg. item #: 716602
DAKE716602
Call for freight quote on this item or we will confirm freight charges before shipping.1
$471.24

111
Copyright © 2024 Smith-Hamilton, Inc
0.009 230530 07:09