Technical Sales 1–800–458–3687

Delta 36-L552LVC 5 HP Motor 3ph low volt UNISAW

Receive a FREE Amana 10 inch Saw Blade for just 
with the Purchase of Select Table Saws

Promo Code 04-C010060TCZ (Shipping charges required on select models)

s-h alt 

The 36-L552LVC includes 5 HP motor, 230V, 3 Phase, 13 amp, 60 Hz Motor, 52 inch BIESEMEYER Fence and Tube, Black precision BIESEMEYER fence body, UNISAW Black Table Board 52 inch BIESEMEYER Fence, Black 2x2x34-1/2 inch fence legs, BIESEMEYER Standard Accessory Drawer.

  • Power for production cutting, Low volt at the switch
  • Single-Cast Trunnion System results in incredible vibration control providing continuous smooth operation and dependable accuracy
  • Dual Front Cranks make adjusting blade height and blade bevel easy, accurate, and repeatable in all your operations
  • The Bevel Dial allows fine tuning of the blade bevel with ease and provides accuracy you can trust to within 1/4 degree
  • The Cabinet Construction consists of a large cast-iron base providing stability and solid footing
  • Baldor Motor provides increditable power and is available in 5 HP
  • Improved Table-Top Geometry provides more surface area to stabilize the product and offers outstanding smoothness and superior ease
  • The Largest Blade Opening in class makes fine tuning your riving knife and blade changes easier than ever without scraping up your skin
  • The Push Button Arbor Lock makes the blade changing process simple and more natural with the use of only 1 wrench, without busting your knuckles
  • Large, Easy to Access ON/OFF switch is multi-directional and can be activated from any angle. Its mounting bracket is more solid and sturdy for those times when turning it off with a knee or a foot is necessary.
  • Smart Storage provides simple and accessible storage for 5 saw blades, 2 riving knives, an arbor nut flange, and the entire rise-and-fall split guard assembly. There is also adequate room for a push stick, arbor wrench with extra-long handle, and standard throat plate.
  • Bi-Level Dust Extraction uses only 1 collector hose coupled with a sloping bottom cabinet used to navigate dust, and the new closed bevel gauge provides a sealed interior. This combination results in much higher level of dust collection.
  • Tool-Free Split Guard design allows a true rise-and fall riving knife by using a lever on the front of the saw or inside the throat plate. You can then add the anti-kickback paws and guard to the riving knife without tools.
  • BIESEMEYER Fence System provides hairline pointer and built-in tape allowing you to make precision set-ups, cut after cut. 9-ply fence faces have improved tolerances like no other as well as an improved cam front lock lever for an over lock with a curved edge.
Model 36-L552LVC
Motor: 5 HP, wired 230V, 3 Phase, 60 Hz
Arbor Size: 5/8 inch
Blade Diameter: 10 inch
Blade Speed: 4,300 RPM
Max Rip To Right Of Blade: 52 inch
Max Rip To Left Of Blade: 13-1/2 inch
Depth of Cut at 45 degree: 2-1/8 inch
Depth of Cut at 90 degree: 3-1/8 inch
Distance, front of table to center of blade: 18-1/2 inch
Table in Front of Saw at Max Depth of Cut: 13-1/2 inch
Max Width of Dado: 1-1/8 inch
Miter Gauge Groove: 3/8 x 3/4 inch
Chip Exhaust Opening: 4 and 5 inch
Table Height: 35 inch
Table Size of Cast-Iron Top (with wings only): 31x40 inch
Table Size with BIESEMEYER Table, Wing & Laminate Board: 31 x 82 inch
Length: 87 inch
Width: 37 inch
Width with Fence on Saw: 46 inch
Height: 35 inch
Weight: 665 lbs

s-h alt

DELTA will repair or replace, at it's expense, and it's option, any new DELTA machine, machine part, or machine accessory which in normal use has proven to be defective in workmanship or material, provided that the customer returns the product prepaid to a DELTA factory service center.

oliver 0812 Circular blade sharpener

Finally, a sharpener for every home shop that will make your cutting job more efficient and easier at anytime and anywhere. All you need is the 0812 Circular Blade

Sharpener and a hand grinder with our included diamond grinding wheel, and you can save your workshop upkeep and have your blades in prime condition for efficiency and safety assurance.

Easy to use and almost hands free grinding allows you to
configure the sharpener to work with blades from 7.5 to 12 inch in diameter with 5/8 or 1 inch arbor.

Packaging Size

  • NW/GW: 24lbs/26.5lbs
  • 10 x 20 x 18.5 inch
  • 4 inch Angle grinder required for use
    (Not Included)


  • Sharpens circular saw blades from 7.5 to 12 inch diameter.
  • Portable compact design.
  • Sturdy die casting iron base.
  • 4 inch diamond blade included
  • Suitable for regular blades and carbide tip blades.
  • 2 Year Limited Warranty

Oliver cicular saw blade sharpener
812 Circular Saw Blade Sharpener


52 IN. UNISAW 5HP / 220V / 3PHASE
lease to own for as little as:$56 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1

Mfg. item #: 812
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20

Copyright © 2024 Smith-Hamilton, Inc
0.003 161129 14:59