Wilton Direct Drive Electro Mag. Clutch

DIRECTDRIVE ROUND COLUMN DRILL PRESSES WITH ELECTRO-MAGNETIC CLUTCH

Standard Features

• Push button control pane

• Power feed gear box fitted with an electro­magnetic clutch for power feed engagement and overload protection

• Heavy duty quill and spindle with manual quill locking

• Tempered, ground spindle with internal taper mounted in precision bearings for maximum accuracy, minimizing deflection

• Speed and feed selectors are located on one side of the drill head for convenience and ease of operation

• Oversized base is precision ground with T-slots for added versatility and stability

• Coolant tank and pump integrated into base

• Spindle gear box is equipped with steel hardened, ground, shafts and gears

• Spindle gear box is internally lubricated in a continuous oil bath for long term smooth operation

Standard Equipment

• Automatic tool ejector

• Work light

• Hand wheel for fine feed

• Coolant system

Specifications
Model	2401/2402	2403/2404	2444/2445	2455/2456	2475/2476
Drilling capacity, mild steel	1 3/8	1-3/4	2	2-3/8	2-3/4
Drilling capacity, cast iron	1 1/2
Tapping capacity, mild steel	1 1/2	1-9/16	1-3/4	2	2-1/8
Tapping capacity, cast iron	1 9/16
Quill Diameter (in.)		3.228	3.465	3.465	3.78
Drills to center	28
Morse taper	4MT	4MT	5MT	4MT	5MT
Horse power	2 HP	3HP,220/ 440V,3Ph**	4HP, 220/440V, 3Ph**	5-1/2HP, 220/440V, 3Ph**	7-1/2HP, 220/440V, 3Ph**
Speed range	8(112, 160, 245, 358, 532, 762, 1164, 1704)	9 (82, 120, 180, 354, 528, 678, 1026, 1524)	9(55,98,156, 198,346,456, 576, 822, 1338)	12(48,72,96, 144,186, 234,288,360, 480,804, 996, 1278)	12(42,58,86,116, 154, 249,304,412,554, 748, 1098, 1485)
Automatic feeds	3(.004, .007, .010)	.004, .008, .012, .016	.003, .006, .010, .014	.002, .004, .006, .008, .014, .020	.002, .004, .006, .008, .014, .020
Spindle travel	7	9	10	10	11
Spindle to table	Min. 1.37", Max. 30.5	Min 2.75 Max30-1/2	Min2.95 Max30-1/2	Min2.75 Max30-1/2	Min Max
Spindle to base	48	49	50	51	51
Table dimensions	22x 19	22x19	33-1/2x23-1/2	33-1/2x23-1/2	33-1/2x23-1/2
Table T-slot size	1/2	1/2	5/8	5/8	5/8
Table load capacity	575 lbs	575	575	750	750
Center spindle to front of column	14	14	15	16-1/2	16-1/2
Column diameter	6.88	3.228	3.465	3.465	3.78
Overall dimensions	91" x 22" x 37"	50x27x98	53x30x108	53x33x109	55x33x115
Hole making capability	small/medium/ large	medium/large	medium/large	medium/large	medium/large
Weight	1279 lbs	1632	2405	2800	2536

 

ELECTRICAL SPECIFICATIONS

Machine comes standard 220/440v-3 phase, 110v at switch.  Please specify voltage at time of order.

 

NOTE:  All Wilton Machines are manufactured to ANSI Specifications and use Electrical Components that are manufactured to NEMA Guidelines.  If there are special electrical requirements, other than the Wilton Machinery Standard Electrical Package, at the location of equipment installation due to specific Corporate, City, County, State or other Electrical Regulations, those specifications must be defined to Wilton Machinery prior to acceptance of machine order.

 Manual

There are no listed accessories.