DIRECTDRIVE ROUND COLUMN DRILL PRESSES WITH ELECTRO-MAGNETIC CLUTCH
Standard Features
Push button control pane
Power feed gear box fitted with an electroÂmagnetic clutch for power feed engagement and overload protection
Heavy duty quill and spindle with manual quill locking
Tempered, ground spindle with internal taper mounted in precision bearings for maximum accuracy, minimizing deflection
Speed and feed selectors are located on one side of the drill head for convenience and ease of operation
Oversized base is precision ground with T-slots for added versatility and stability
Coolant tank and pump integrated into base
Spindle gear box is equipped with steel hardened, ground, shafts and gears
Spindle gear box is internally lubricated in a continuous oil bath for long term smooth operation
Standard Equipment
Automatic tool ejector
Work light
Hand wheel for fine feed
Coolant system
Specifications | |||||
Model | 2401/2402 | 2403/2404 | 2444/2445 | 2455/2456 | 2475/2476 |
Drilling capacity, mild steel | 1 3/8 | 1-3/4 | 2 | 2-3/8 | 2-3/4 |
Drilling capacity, cast iron | 1 1/2 |
|
|||
Tapping capacity, mild steel | 1 1/2 |
1-9/16 |
1-3/4 |
2 |
2-1/8 |
Tapping capacity, cast iron | 1 9/16 | ||||
Quill Diameter (in.) |
3.228 |
3.465 |
3.465 |
3.78 |
|
Drills to center | 28 | ||||
Morse taper | 4MT | 4MT | 5MT | 4MT | 5MT |
Horse power | 2 HP |
3HP,220/ |
4HP, 220/440V, 3Ph** |
5-1/2HP, 220/440V, 3Ph** |
7-1/2HP, |
Speed range | 8(112, 160, 245, 358, 532, 762, 1164, 1704) |
9 (82, 120, 180, 354, 528, 678, 1026, 1524) |
9(55,98,156, 198,346,456, 576, 822, 1338) |
12(48,72,96, 144,186, 234,288,360, 480,804, 996, 1278) |
12(42,58,86,116, 154, 249,304,412,554, 748, 1098, 1485) |
Automatic feeds | 3(.004, .007, .010) |
.004, .008, .012, .016 |
.003, .006, .010, .014 |
.002, .004, .006, .008, .014, .020 |
.002, .004, .006, .008, .014, .020 |
Spindle travel | 7 | 9 | 10 | 10 | 11 |
Spindle to table | Min. 1.37", Max. 30.5 |
Min 2.75 Max30-1/2 |
Min2.95 Max30-1/2 |
Min2.75 Max30-1/2 |
Min Max |
Spindle to base | 48 | 49 | 50 | 51 | 51 |
Table dimensions | 22x 19 | 22x19 | 33-1/2x23-1/2 | 33-1/2x23-1/2 | 33-1/2x23-1/2 |
Table T-slot size | 1/2 | 1/2 | 5/8 | 5/8 | 5/8 |
Table load capacity | 575 lbs | 575 | 575 | 750 | 750 |
Center spindle to front of column | 14 | 14 | 15 | 16-1/2 | 16-1/2 |
Column diameter | 6.88 |
3.228 |
3.465 |
3.465 |
3.78 |
Overall dimensions | 91" x 22" x 37" | 50x27x98 | 53x30x108 | 53x33x109 | 55x33x115 |
Hole making capability |
small/medium/ large |
medium/large | medium/large | medium/large | medium/large |
Weight | 1279 lbs | 1632 | 2405 | 2800 | 2536 |
ELECTRICAL SPECIFICATIONS
Machine comes standard 220/440v-3 phase, 110v at switch. Please specify voltage at time of order.
NOTE: All Wilton Machines are manufactured to ANSI Specifications and use Electrical Components that are manufactured to NEMA Guidelines. If there are special electrical requirements, other than the Wilton Machinery Standard Electrical Package, at the location of equipment installation due to specific Corporate, City, County, State or other Electrical Regulations, those specifications must be defined to Wilton Machinery prior to acceptance of machine order.