Technical Sales 1–800–458–3687

General Equipment Dust Collection System

DUST COLLECTION SYSTEMS

osha complaiant logo silica standard table 1
hepa-filtration-general-badge

 

DUST-COLLECT-RTM DUST COLLECTION SYSTEM
MODEL DESCRIPTION WEIGHT (LBS)
VS220 Dust Collection System. Two, 115 VAC, 60 HZ, single speed motors. Peak 2.6 HP (two motors). Replaceable HEPA lters, primary lter status monitoring gauge plus manual cleaning system. Includes 3 inch diameter, 25 foot length hose and connectors.

121.0

VS220 DUST-COLLECT-RTM - HOSE and WAND
PART NUMBER DESCRIPTION WEIGHT (LBS) COMPATIBLE PRODUCT
VS220-0250A Dust collection wand and head. 2 inch diameter steel wand, 20 inch wide diecast head, adjustable height rollers, plated. Pack of 1. 6.2

VS220

VS220-1000A Dust collection hose, 2 inch diameter, 25 foot length, helix reinforced, polyethylene, includes connectors. Pack of 1. 11.0
VS220-1100A Dust collection hose, 3 inch diameter, 25 foot length, helix reinforced, polyethylene, includes connectors. Pack of 1. 18.0

 

Click here to download Guide to Silica Dust Control

Click here to download Silica Dust Written Exposure Plan Template

VS220 DUST-COLLECT-R SYSTEM

Make jobsite cleanup a breeze!

The Model VS220 offers an uncompromising balance of power, performance and utility in a portable dust collection system. TheHEPA filtration system helps comply with the OSHA 29 CFR 1910.1153 Silica Dust Regulation. A low center of gravity providesgreater stability than vertical, canister style dust collectors more prone to damage when pulled around by the hose. The VS220features separate 2 and 3 inch diameter dust port connections for simultaneous or independent operation depending on specificdust control requirements. Greater versatility over single port designs is also provided with no hose adapters to lose. Indicatorgauge tells operator when filter requires cleaning using the manual shaker system that provides greater reliability and longerservice life than automatic, pulse style cleaning systems. The heavy-duty, high density polyurethane housing and welded, steelframe resists damage delivering a long service life an

Powerful, durable and portable, the Dust- Collect-R offers dual-task capability, allowing for increased productivity in jobsite cleanup. The portable dust collection systems overall power, performance and heavy-duty design ensure a long service life and high ROI while keeping your jobsite OSHA compliant.

System Features:

  • 99 percent efficient at 0.5 micron pre- filter
  • 99.97 percent efficient at 0.3 micron HEPA secondary filter
  • 3 inch diameter port
  • 2 inch diameter port
  • Low center of gravity for stability
  • 5 inch diameter casters for easy movement
  • Clean filter indicator gauge
  • Manual filter shaker/cleaner

POWER SOURCE

  • Electric Motor: Two, 115 VAC, 60 HZ, single speed motors
  • Peak Horsepower (2 motors): 2.6
  • Maximum Amperage (2 motors): 17 Amperes


FLOW RATE/LIFT CAPACITY

  • Volume Flow: 220 CFM (6.3 CMM)
  • Water Lift (Suction): 110 inches (2794 mm)


FILTRATION

  • Pre-filter: 99 percent efficient
  • Secondary Filter: 99.97 percent efficient HEPA
  • Filter Size: 18.3 square feet (1.7 square meters)
  • Pre- Filter Construction: pre-filter geo- synthetic polyfelt pleated
  • HEPA Secondary Filter Construction: PTFE pleated media


GENERAL

  • Material: High density, UV resistant polyethylene housing and welded, steel frame
  • Dust Hopper Capacity: 12.5 US Gallons (47.3 L)
  • Hose: Comes standard with 25 feet (7.6 M) of 3 inch (76.2 mm) diameter flexible hose and coupler; 25 foot (76.2 M),2 inch (50.8 mm) diameter hose, coupler and wand are optional
  • Weight: 100 lbs (15 kg)


DIMENSIONS

  • Height: 35.3 inches (896.6 mm)
  • Length: 34.5 inches (876.3 mm)
  • Width: 19 inches (482.6 mm)

LIMITED PRODUCT WARRANTY


GENERAL EQUIPMENT COMPANY makes the following limited warranty to the original purchaser of each new and unused light construction equipment product:

GENERAL EQUIPMENT COMPANY MAKES NO WARRANTY THAT THE LIGHT CONSTRUCTION PRODUCTS SOLD HEREUNDER SHALL BE MERCHANTABLE OR THAT SUCH PRODUCTS SHALL BE FIT FOR ANY PARTICULAR PURPOSE AND THERE ARE NO WARRANTIES EXPRESSED OR IMPLIED MADE OTHER THAN ITS STANDARD, LIMITED WARRANTY.

WHAT THE LIMITED WARRANTY COVERS

GENERAL EQUIPMENT COMPANY warrants that each new and unused light construction equipment product and or accessory product sold by it: A) to be free from defects in material and workmanship under normal use/service for a period of two (2) years from date of purchase: B) to warrant the labor expenses associated with defects in material and workmanship for a period of one (1) year from date of purchase. The obligation under this warranty being limited to current flat labor rates and the replacement and/or repair at its Owatonna, Minnesota, factory site, or at an authorized dealer designated by it, of such part or parts as shall appear upon inspection to have been defective in material or workmanship at the time sold, provided that the part or parts claimed defective are returned to the inspection point, transportation charges prepaid. At the time of requesting warranty service, the purchaser must present evidence of the purchase date of the part or parts submitted for warranty inspection.

The only remedies the purchaser has in connection with the breach of performance of any warranty for the light construction equipment products sold by GENERAL EQUIPMENT COMPANY are those set forth in this document. In no event will GENERAL EQUIPMENT COMPANY, its authorized dealer or representative, or any company affiliated with GENERAL EQUIPMENT COMPANY be held liable for any incidental or consequential damages or injuries.

WHAT THE LIMITED WARRANTY DOES NOT COVER

This warranty does not cover depreciation or damage caused by: normal wear, accident, improper protection in storage, improper use, alterations, tampering, the environment, improper maintenance, lack of maintenance or incidental costs incurred by the original purchaser while the light construction equipment product is being examined and or repaired under warranty. In addition to the above limitations and/or exclusions, the following basic product components are not covered by the limited warranty:

1) Parts and/or components subject to wear with normal usage, but not specifically limited to the following:

a) High impact/wear related components including, but not limited to: V-belts, flails, flail rods and flail drums.
b) High abrasion/wear related components including, but not limited to: augers, auger flighting and boring heads.
c) Engine throttle control cable assembly and related control devices.
d) Centrifugal clutch components including, but not limited to: shoes, springs, drum and motor assembly.

2) Parts and labor for scheduled and general maintenance services as defined in the applicable Operators Manual.

3) Engines, motors, controls and other accessories sold with, attached to, or operated with a light construction equipment product sold by GENERAL EQUIPMENT COMPANY and warranted separately by the Original Equipment Manufacturer (OEM) per its respective warranty program. Contact the Customer Service Department of GENERAL EQUIPMENT COMPANY for assistance in obtaining specific OEM warranty coverage.

This limited warranty gives you specific legal rights and may also have other rights which may vary from state to state. Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages. These limitations may not apply to the original purchaser.

VS220
SYSTEM, CONTROL, DUST, 115VAC
Mfg. item #: VS220
GENVS220
lease to own for as little as:$64 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$3,215.52

210
VS220-0250A
ASSY, WAND, DUST, 2D
Mfg. item #: VS220-0250A
GENVS220-0250A
Call for freight quote on this item or we will confirm freight charges before shipping.1
$295.41

210
VS220-1000A
ASSY, HOSE, 3D, 300L
Mfg. item #: VS220-1000A
GENVS220-1000A
Call for freight quote on this item or we will confirm freight charges before shipping.1
$456.21

210
VS220-1100A
ASSY, HOSE, 2D, 300L
Mfg. item #: VS220-1100A
GENVS220-1100A
Call for freight quote on this item or we will confirm freight charges before shipping.1
$239.69

210
Copyright © 2024 Smith-Hamilton, Inc
0.004 240308 10:47