Technical Sales 1–800–458–3687

Finish Pro FP-6385 Line Graining, Deburring

CAUTION: If fire hazardous materials, such as aluminum, titanium, magnesium, etc., are to be processed, a dust collection system that conforms to National Fire Protection Association (NFPA) should be used.

We are pleased to offer for your consideration this proposal on the Finish Pro Model FP-6385 Dry Type Line Graining/Deburring/Finishing machine. This equipment is available as follows:

Standard Features:

  • Abrasive belt size: 63 x 85 inch
  • 10 inch diameter heavy duty drum for perfect graining
  • 3-1/8 inch wide opening
  • Motorized Table Lift with LED display
  • Variable Speed Conveyor
  • Conveyor Forward and Reverse
  • Belt Safety Overtravel Switches
  • Electronic Eye Belt Tracking. Belt tracking adjusting lever ( Belt Trimmer ) to  Re-adjust the tracking system when running extremely out of parallel belts
  • 4-Jackscrew Table Support
  • Double Infeed and Outfeed Pinch Rolls with protective guards
  • Conveyor Belt Tracking System
  • Safety System with Disc Brake. Air operated disc brakes to stop sanding head in 3-5 seconds in the even of loss of air pressure or activation of any emergency stop device
  • Table Height Digital Readout
  • Load Meter indicates percentage of full motor loads
  • Belt change door electrically interlocked for safety purpose
  • Air tensioning of belt for accurate tensioning and compensation of belt stretch
  • Quick release sanding head support for fast belt change
  • Dust collection hood with 6 inch outlet is located adjacent to abrasive head in sanding area
  • Emergency stops from almost any point
  • Noise level bellows 82 dba
  • Operation manual, control tags, danger signs, and warning labels in English on machine
  • 208/230V, 3-Phase ( 440/460V is available )
  • One year Industrial Warranty for parts.

NOTE

  • Prices are for 208-230 VOLTS
  • Total amps 150 at 230/3/60
  • COMPRESSED AIR REQUIRED: 2 CFM at 90 PSI

OPTIONAL: WET DUST COLLECTORS use a water filled tank through which all grinding dust is pulled by a motor driven impeller fan. Particles sink to the base of the tank where they can easily be removed by raking into a provided container. Normal tap water is used, there are not filter bags to be changed. Water level is automatically controlled when unit is connected to a water supply. All units are equipped with explosion relief door and sound silencer.

 

Specifications
Model FP-6385
Max. Part Width 63 inch
Abrasive Belt Size 63 x  85 inch
Contact Roller Size 10 inch Dia
Passline Height 31 - 37 inch
Max. Thickness Capacity 3-1/8 inch
Conveyor Drive Speeds 8-40 FPM
Infeed Conveyor Length 20 inch
Dust Collector Capacity (Requires two WDC-2100 dust collectors) 3,800 CFM
Main Motor 40 HP, 230V / 460V, 3-Ph
Conveyor Motor 3 HP, 230V / 460V,3-Ph
Table Lifting Motor 3 HP, 230V / 460V, 3-Ph
Net Weight, approx. 8,650 LBS
Machine Dimensions, LxWxH 79 x 95 x 83 inch

 

Models and Accessories
FP-6385 Finish Pro Model FP-6385 Dry Type Line Graining - Deburring - Finishing machine
WDC-2100 Wet Dust Collector, 2,100CFM
HDDP Heavy Duty Ducting Package

 

GMC-Banner-Dealers

FP-6385
63 X 85 FINISH PRO DRY TYPE, SINGLE BELT HEAD
PRICE REFLECTS YOUR EXCLUSIVE BROTHER-IN-LAW DEAL ON THIS QUALITY GMC EQUIPMENT, ALWAYS FREE FREIGHT NO HANDLING CHARGES
Mfg. item #: FP-6385
GMCFP-6385
lease to own for as little as:$1,515 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.6
NEW ITEM
$75,737.46

6
WDC-2100
GMC WET DUST COLLECTION 220V 208-230/460 VOLT, 3-PHASE, 60 HZ (
PRICE REFLECTS YOUR EXCLUSIVE BROTHER-IN-LAW DEAL ON THIS QUALITY GMC EQUIPMENT, ALWAYS FREE FREIGHT NO HANDLING CHARGES
Mfg. item #: WDC-2100
GMCWDC-2100
lease to own for as little as:$164 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.6
$8,207.77

6
Call for price. GMCHDDP
Copyright © 2024 Smith-Hamilton, Inc
0.003 240314 06:49