chat now with southern tool
Technical Sales 1–800–458–3687

GMC GMM-5KV/GMM-5KVF CNC Knee Type Milli

Machine Standard Features and Equipment:

  • ISO 9001 certified
  • Taiwan mill with USA Centroid CNC control
  • CENTROID 3 axis fully automatic CNC control # M400S, made in USA
  • 4th axis is upgradeable
  • Easy switch from CNC to manual operation
  • CNC control coolant system on/off, with base chip/coolant pan
  • Model # GMM-1054-CNC have mechanical variable spindle speed from 70-4,300 rpm, CNC control spindle start/stop, spindle auto/manual, spindle clockwise/counter clockwise
  • Model # GMM-1054-CNC have inverter drive spindle speed from 65-5,000 rpm,
  • Model # GMM-1054F-CNC has CNC programmable spindle speeds, from 65-5,000 rpm.  CNC control spindle start/stop, spindle auto/manual, spindle clockwise/counter clockwise
  • Heavy Duty Meehanite Castings.
  • Hardened and ground ways: # GMM-1054-CNC  have box ways on knee and Column
  • Turcite-coated surfaces for x/y axis
  • Precision ground C7 class ballscrews on x, y and z axis with pre-loaded angular contact bearings
  • End travel CNC software limit switches for xyz (three) axis
  • Safety handwheels equipped for all axis for manual movement
  • Auto lubrication with CNC control alarm and stopping after the program finish
  • Two rubber chip guards and Tool box kit
  • Power source 208V or 220V,3phase ( 440V is optional )
  • One year industrial warranty for parts
     

Standard Features and equipment for “CENTROID” CNC control # M-400S:

  • PC based, Pentium, 32 Bit digital signal processor
  • Upgradeable software, and teach mode, software travel limits
  • 128 MB internal hard drive ( control memory / storage capacity )
  • 1.44 MB HD internal floppy disk drive, 3.5 inch floppy
  • 15 Color LCD display and alpha numeric keyboard
  • LAN ready, RS232 (interface), USB2.0, floppy drive
  • High speed 3D contouring ( 3 axis simultaneous )
  • High speed Machining contains unlimited part program size, cuttercomp lookahead, high block throughout, accel/decel lookahead, high speed 3D contouring.
  • Standard software includes cutter compensation, drilling cycle, multi range spindle and easy conversational programming language
  • Console display includes current position , run time , feed rate & parts counter, program display, as well as English, Spanish, French, and Chinese language dis.
  • Conversational programming includes Pocket Cycles, Frame Mill Cycle, Clean out of Irregular Pockets, Straight or Ramped Plunges on Canned Cycles, Position and Line & Arc Events, Automatic Corner Radius, Copy and Repeat & Rotate, Mirror with nesting, Cycles of Drilling, Boring, threadmilling ( standard and helical), and bolthole pattern cycles, Automatic Angle Calculator, Graphical Math Help for Solving Angles & Intersections, etc, Linear and Polar Values on Same Event, Single Key Graphing Anytime During Programming
  • Control Operator Panel ( on Console ) includes:Spindle start/stop, spindle auto/manual, spindle clockwise/counter clockwise, E-stop, Feedrate Override, Fast/slow Jog Buttons, Continuous Jog or Incremental Jog ( X1, X10, X100 ), MPG select Button, Tool check, Cycle Start / Cycle Cancel, Feed hold & Single Block, Axis jogs of x, y, z , Tool Index +/-, and Programmable Auxiliary Keys
  • Operation includes: Inch/Metric Conversions,Icon and Soft Key-based Menus, Alpha-numeric Program Names, 3D Tool Path Graphics ( G code Back Plot ), On Screen Operation Instructions, Part Setup Menus, Tool Length & Diameter Setup Menus,Full Screen Unlimited File Size Text Editor, Backlash& Leadscrew Compensation, Software Travel Limits, and Auto Machine Home and Park
  • G-code and M-function Programming
  • 200 Position Tool Library, Tool Length and Radius Compensation
  • Utilities include: Backup amd Restore System Files, Format Floppy Command, PLC and System Diagnostics, Import/Export Program, Drag Plot ( Patented ), Auto Tune, Error message Display
  • UL listing for individual electrical components inside control cabinet
  • Video Tape for CNC control is available ( optional )
Specifications
Model GMM-949-CNC GMM-949F-CNC
Table Size 9 x 49 inch
Table Load Capacity 650 LBS
Bed way type Box way on knee Dovetail way on column
X Axis Travel 33 inch
Y Axis Travel 12 inch
Z Axis Travel 16 inch
Ram travel 12 inch
Spindle Taper Type R-8
AC Spindle Motor 3 HP, 220V
Spindle speed a. # GMM-949-CNC: vari-speeds 60-4,300 rpm
b. # GMM-949F-CNC: CNC speeds 65-5,000 rpm
Quill spindle Diameter 3 3/8 inch
Quill (Spindle) travel 4 -1/2 inch
Table T-slot size 5/8 inch x 3 slots
Head tilting front/back 45 degree
Ram swivel right/ left 360 degree
Spindle to table 18 / 0 inch
Spindle to column 19 / 0 inch
Resolution 0.0001 inch
Repeatability 0.0003 inch
Repostioning 0.0002 /12 inch
Servo Motors xyz 29 inch/LB, DC
Rapid Traverse, xyz 230 IPM
Mach weight, LBS 2,850 LBS
Specifications
Model GMM-1054-CNC GMM-1054F-CNC
Table Size 10 x 54 inch
Table Load Capacity 750 LBS
Bed way type Box way on knee Box way on column
X Axis Travel 36-1/2 inch
Y Axis Travel 16-1/2 inch
Z Axis Travel 16-1/2 inch
Ram travel 22-1/2 inch
Spindle Taper Type R-8
AC Spindle Motor 3 HP ,220V
Spindle speed a. #GMM-1054-CNC: vari-speeds 60-4,300 rpm
b. # GMM-1054F-CNC: CNC speeds: 65-5,000 rpm
Quill spindle Diameter 3 3/8 inch
Quill (Spindle) travel 4 -1/2 inch
Table T-slot size 5/8 inch x 3 slots
Head tilting front/back 45 degree
Ram swivel right/ left 360 degree
Spindle to table 17 / 0 inch
Spindle to column 27 / 4 inch
Resolution 0.0001 inch
Repeatability 0.0003 inch
Repostioning 0.0002 /12 inch
Servo Motors xyz 29 inch/LB, DC
Rapid Traverse, xyz 230 IPM
Mach weight, LBS 3,950 LBS
Specifications
Model GMM-5KV-CNC GMM-5KVF-CNC
Table Size 10 x 54 inch
Table Load Capacity 850 LBS
Bed way type Box way on knee Box way on column
X Axis Travel 36 inch
Y Axis Travel 16-1/2 inch
Z Axis Travel 16-1/2 inch
Ram travel 12-1/2 inch
Spindle Taper Type NT # 40
AC Spindle Motor 5 HP, 220V
Spindle speed a. #GMM-5KV-CNC: vari-speeds 60-4,300 rpm
b. # GMM-5KVF-CNC: CNC speeds: 65-5,000 rpm
Quill spindle Diameter 4 -1/8 inch
Quill (Spindle) travel 4 -1/2 inch
Table T-slot size 5/8 inch x 3 slots
Head tilting front/back 45 degree
Ram swivel right/ left 360 degree
Spindle to table 17 / 0 inch
Spindle to column 27 / 4 inch
Resolution 0.0001 inch
Repeatability 0.0003 inch
Repostioning 0.0002 /12 inch
Servo Motors xyz 29 inch/LB, DC
Rapid Traverse, xyz 230 IPM
Mach weight, LBS 4,250 LBS

Optional Equipment and Software of Centroid M400S for GMC CNC Knee Mills

  • One day on site training
  • DP-4  Probing package, includes DP-4 and probing cycles 7 types for setting fixtures and tool offsets # 10405
  • DP-4 Digitizing package # 10770 and 10405, incl. probing and Digitizing
  • MPG-100 steps /revolution with handwheel, P/N 10808
  • CENTROID Engraving software, P/N 10740
  • Intercon off-line Conversational Programming for desktop PC# 10730
  • Second Language
  • TT-1 tool touch-off kit w/ software for automatic tools setup # 10220
  • Compression tapping software, P/N 10620
  • 4th Axis package, incl 150mm rotary table, servo & software# 10450
  • Mutiple work coordinate G55-59 , #  10600
  • Scaling and mirroring G50 and G51, # 10625
  • Unlimited part program size # 10630
  • Package B software includes Subprograms and Macros, Multiple Work Coordinates and Scaling and Mirroring # Pkg B
  • Halogen working light # HWKL
  • Power Air Draw Bar # HQR8, HIGH QUALITY, USA, free install
  • 52 pcs clamping kit # 900-0001
  • 11pc high precision collet set # R8-Lyndex, Japan 1/8-7/8 inch
  • 17 pc ER40 spring collet set with R 8 chuck, # 900-0005, 1/8-1 inch
  • 17 pc ER40 spring collet set with NT 40 chuck, # 900-0005-40,1/8-1 inch
  • NMTB 40 End Mill Holder set # EMS7-NT40, 7 pcs, 3/8, 1/2, 5/8, 3/4, 7/8, 1 and 1-1/4 inch
GMCPF-180X POWER FEED FOR X AXIS, 110V
GMCPF-180Y POWER FEED FOR Y AXIS , 110V
GMCPF-180Z POWER FEED FOR Z AXIS / KEE UP/DOWN, 100V
GMCCOOL COOLANT SYSTEM FOR GMC MILLS
GMCNW-949-2 NEWALL DRO # DP-700, 2 axis for GMC 949 mills
GMCNW-949-3 NEWALL DRO # DP-700, 3 axis for GMC 949 mills
GMM-949-CNC
GMC CNC MILL, 9X49 WITH M400S CENTROID CNC CONTROL, FULL 3 AXIS CNC
Mfg. item #: GMM-949-CNC
GMCGMM-949-CNC
lease to own for as little as:$495 per month!
Free shipping to most locations in lower 48 states.22
$24,750.00

1626
GMM-949F-CNC
GMC CNC MILL, 9X49 WITH M400S CENTROID CNC CONTROL, FULL 3 AXIS CNC, PROGRAMMABLE SPEEDS
Mfg. item #: GMM-949F-CNC
GMCGMM-949F-CNC
lease to own for as little as:$535 per month!
Free shipping to most locations in lower 48 states.22
$26,750.00

1626
GMM-1054-CNC
GMC CNC MILL, 10X54 WITH M400S CENTROID CNC CONTROL, FULL 3 AXIS CNC
Mfg. item #: GMM-1054-CNC
GMCGMM-1054-CNC
lease to own for as little as:$515 per month!
Free shipping to most locations in lower 48 states.22
$25,750.00

1626
GMM-1054F-CNC
GMC CNC MILL, 10X54 WITH M400S CENTROID CNC CONTROL, FULL 3 AXIS CNC, PROGRAMMABLE SPEEDS
Mfg. item #: GMM-1054F-CNC
GMCGMM-1054F{00
lease to own for as little as:$559 per month!
Free shipping to most locations in lower 48 states.22
$27,950.00

1626
5KV CNC MILLING MACHINE
Mfg. item #:
GMCGMM-5KV-CNC
lease to own for as little as:$579 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$28,950.00

2854
Call for price. GMCGMCPF-180X
Call for price. GMCGMCPF-180Y
Call for price. GMCGMCPF-180Z
GMCCOOL
COOLANT SYSTEM FOR GMC MILLS
Mfg. item #: GMCCOOL
GMCGMCCOOL
Add to Equipment listed above for Free Freight or flat shipping rate of $10.00 within the Lower 48 States30
$350.00

190
Call for price. GMCGMCNW-949-2
Call for price. GMCGMCNW-949-3
Copyright © 2018 Smith-Hamilton, Inc
0.008 150419 18:39