HT7 Disc Floor Sander
The HT7 is a high performance disc floor sander (edger) that delivers unrivalled balance and feel. The choice of professionals, the HT7 delivers the power to tackle the toughest of jobs. Designed to be easy to handle, with bias off switching and optional disposable paper dust bags for safe and simple operation, whatever the job.
The HT7 has been precision engineered to meet the challenging demands of the tool hire and rental, contractor and professional markets. The powerful four brush motor drives a dynamically balanced sanding pad. The HT7's drive is transmitted through a hardened steel alloy pinion and large diameter aluminium bronze drive gear that will not slip or stall. Motor commutation is via Hiretech's precision moulded brush block and brass brush holders. Constant force brush springs ensure a smooth, consistent power transmission.
Hiretech's unique metal backed sanding pad gives the HT7 the balance, feel and touch demanded by the professional craftsman. A high precision press tool produces a dynamically balanced disc to which the rubber sanding pad is bonded using a specially developed process. This special process allows the rubber pad to be bonded to the metal back leaving an 8mm (5/16") deep rubber edge around the whole circumference of the disc. This design also allows the pad to be accurately trimmed and properly maintained throughout its life. Operator safety is improved as the soft edge reduces the risk of base boards, pipe work and other exposed work surfaces being cut into.
Manufactured as a dynamically balanced component, the HT7 sanding pad does not require any additional balancing or corrective procedures to make it run without vibration. This ensures that the HT7 will run smoothly - prolonging the life of the pad, drive gear and motor.
The HT7 Disc Floor Sander will sand a high quality, score-free finish on hard and soft wood floors, including parquet and any solid wood surface that requires rapid sanding and levelling. The HT7 can also be used on a wide range of other surfaces including some types of decking, fibre board, cork and composition floors. Ideal for confined areas such as closets, stair treads and sanding right up to the edge of a floor (edge sanding), without damage to the base board or skirting.
The bias off switch and optional disposable paper dust bag system makes the HT7 the safest disc floor sander available. The continuous heavy duty self-cooling four brush motor will not stall or slow down under load when sanding with coarse grit abrasives, removing old surface finishes and deposits of wax and dirt. The HT7âs superb balance and feel make it easy to sand a score-free finish, with a high production rate and fast stock removal when needed.
|Off Load Current||
|Average Load Current||
|Noise||100 dB @ 3'3"|
|Vibration||2.71 m/sÃ¯Â¿Â½ r.m.s.|
|Switch||Bias Off, double pole with power on indicator light|
|Motor||Continuous heavy duty AC/DC self cooling 4 brush|
|Drum/Disc/Pad RPM Off Load||3300|
|Sanding Drum/Disc/Pad||7" dia. metal backed and rubber bonded|
|Drive||Hardened steel alloy pinion and large diameter phosforbronze drive gear|
|Dust Pickup||Seated oversize alloy vacuum fan with adjustable dust pan, disposable paper dust or cloth bag|
|Moving Parts||Sealed for life ball bearings|
|Guards||High impact injection molded ABS|
|Abrasive||7" dia. x 7/8" dia. center hole recommended range P16 to P120 grit fiber or paper back|
|Power Cable||23' non-marking outer insulation|
|Dimensions (w x d x h)||10/8" x 19.9" x 12.8"|
Key Design Features
|HireTech HT7 Disc (Edge) Sander|
|7004||Disc Floor Sander Model HT7 110/120 Volt|
|7038||Disposable Paper Dust Bag HT7/HTF Pack 2 (Box 25)|
|7040||Disposable Paper Dust Bag HT7/HTF (Box 50)|
|163834||Exhaust Bracket Conversion Kit HT7/SS (Paper Bag)|
|1025||Abrasive Disc Fibre Back 16G (Pack 25)|
|1026||Abrasive Disc Fibre Back 24G (Pack 25)|
|1027||Abrasive Disc Fibre Back 50G (Pack 25)|
|1028||Abrasive Disc Fibre Back 80G (Pack 25)|
|1030||Abrasive Disc Fibre Back 120G (Pack 25)|
|1044||Abrasive Disc Paper Back 24G (Pack 25)|
|1045||Abrasive Disc Paper Back 40G (Pack 50)|
|1046||Abrasive Disc Paper Back 80G (Pack 50)|
|1048||Abrasive Disc Paper Back 120G (Pack 50)|
|Economy Paper Discs|
|1044||Abrasive Disc Paper 24G ** Standard Pack of 25|
|1045||Abrasive Disc Paper 40G ** Standard Pack of 50|
|1046||Abrasive Disc Paper 80G ** Standard Pack of 50|
|1048||Abrasive Disc Paper 120G ** Standard Pack of 50|