MultiSpeed Control Available
Four Brush Motor Design
Simple Design Minimizes Downtime
Ease of Maintenance
Four Abrasive Grits
HT8 Multi-Speed Drum Floor Sander
The HT8 Multi-Speed is the next generation floor sander for hire and rental, contractor and professional markets. The worldâs only multi-speed floor sander brings a new dimension to the sanding of all types of wooden floors from parquet to laminates. Versatile, reliable, intelligent - now everybody can sand any type of wooden floor to a perfect finish.
Designed by Hiretech, the multi-speed control provides both on/off switching of the floor sander and the choice of four operating speeds in a simple, easy to use configuration. Additional functionality comes in the form of âno volt startâ that prevents accidental start-up when the power cord is connected to the power supply. Motor stall protection, operating within just 1.5 seconds of a stall event. Motor overload protection and run-time management provided by service indicator lights via the four speed-selector buttons.
For the do-it-yourself user, one of four drum speeds can be selected to match individual skill level - allowing the user to gain confidence before selecting the ideal speed for the job and application.
For the contractor and professional, user the HT8 Multi-Speed is a versatile, powerful floor sander suitable for all types of jobs. The multi-speed control provides the range of performance, control and feel demanded by the skilled user to sand all types of floor to the perfect finish.
Upgrade to the HT8 Multi-Speed
The HT8 Multi-Speed control is available for upgrading any age HT8 or DU8 floor sander - simply plug and go. The upgrade kit includes a complete new handle assembly with multi-speed control, new Owners Manual and Operating Instructions, user instructions and workshop service information. Contact your local reseller for availability and pricing.
HT8 Multi-Speed Abrasive & Speed Application Chart
The HT8 is a high performance 200mm (8") drum floor sander that will level and sand all types of wooden floors, including parquet to a fine score free finish, suitable for finishing with today's modern waterborne lacquers and oils. The HT8 can also be used on a wide range of other surfaces including some types of decking, fiber board, cork and composition floors.
A powerful four brush motor drives a dynamically balanced sanding drum which is covered in a unique drum rubber. Completely self contained with a high efficiency dust pickup, the HT8 breaks down into three simple component parts for easy transport. The high impact ABS injection molded side guards and drum guard will not scar or scuff walls and protect the HT8 during transport.
The unique drum rubber resists abrasion and damaged caused by exposed nails while providing the feel and touch needed to sand a fine, score free finish. Easily replaced in just 20 minutes the Hiretech drum rubber design minimizes downtime and service costs.
Hiretech's patented reversible clamp bar makes it easy for the user to fit abrasives, quickly and accurately. The clamp bar is a dropped forge design that will not bend or distort over time ensuring that the abrasive paper is clamped securely in place at all times. The HT8's unique lifting fin assembly lifts the clamp bar clear of the drum making it a simple, two handed job to remove and fit abrasives.
The HT8 motor is a high speed, universal continuous heavy duty, self cooling four brush design. It will not stall or slow down under load when sanding with coarse grit abrasives, removing old surface finishes, deposits of wax or dirt. This high performance ensures a fast, consistent production rate making it easy for the user to get a regular and uniform finish across the whole floor area and throughout the complete range of abrasive grits.
The design of the motor, as used in all Hiretech floor sanders, means the motor provides varying levels of power depending on load - ideal for floor sanding. The HT8 motor will deliver up to 4.5hp, depending on load, yet can be powered through any standard domestic supply without nuisance tripping or blowing fuses.
Simple maintenance routines keep the HT8 in service and ready for use, minimizing downtime. The multi-speed control provides the workshop technician with an easy to understand sequence of lights that show run-time at 300hrs and 100hr intervals prompting motor and other timed service routines. After these routine service tasks have been completed the run-time is easily reset.
|Off Load Current||
|Average Load Current||
|Noise||95 dB @ 3'3"|
|Vibration||1.60 m/sÃÆÃÂ¯ÃâÃÂ¿ÃâÃÂ½ r.m.s.|
|Switch||Electronic On/Off and multi speed control w/novolt start and overload protection|
|Motor||4.5 HP Continuous heavy duty AC/DC self cooling 4 brush|
|Motor RPM||Multi-speed user selected 8500/7300/6900/6500|
|Drum/Disc/Pad RPM Off Load||Multi-speed user selected 3300/2800/2650/2500|
|Sanding Drum/Disc/Pad||8" wide aluminum extrusion w/molded rubber drum cover|
|Drive||Non-slip toothed timing belts and gear cut pulleys|
|Dust Pickup||Seated oversize alloy vacuum fan with adjustable dust pan, disposable paper dust or cloth bag|
|Moving Parts||Sealed for life ball bearings|
|Guards||High impact injection molded ABS|
|Abrasive||19.5" total length x 8" wide sheet with notched and angled ends recommended range P24 to P120 grit|
|Power Cable||23' non-marking outer insulation|
|Dimensions (w x d x h)||12.7" x 37" x 33.6"|
Key Design Features
|HireTech HT8 - Drum Floor Sander|
|7006||Single-Speed Drum Floor Sander Model HT8 (Clamp Bar) 110/120 Volt|
|7006EX||Drum Floor Sander Model HT8 110/120V|
|7006MS||MultiSpeed Drum Floor Sander Model HT8 (Clamp Bar) 110/120 Volt|
|7006EXMS||Drum Floor Sander Model HT8 Multi-Speed 110/120V|
|20320||Multi-Speed Conversion Kit 110V|
|7039||Disposable Paper Dust Bag HT8 (Box 50)|
|20100||Evolution Drum Conversion Kit|
|20320||MultiSpeed Conversion Kit HT8/DU8 110 Volt NA|
|1001||Floor Sander Sheet HT8 24G OC (Pack 25)|
|1002||Floor Sander Sheet HT8 24G (Pack 25)|
|1003||Floor Sander Sheet HT8 40G (Pack 50)|
|1004||Floor Sander Sheet HT8 80G (Pack 50)|
|1005||Floor Sander Sheet HT8 120G (Pack 50)|
|1010||Floor Sander Belt HT8 EX 24G - FOR 7006EX, 7006EXMS - Models Only Box QTY = 5 Pcs (Priced as EACH)|
|1011||Floor Sander Belt HT8 EX 36G - FOR 7006EX, 7006EXMS - Models Only Box QTY = 5 Pcs (Priced as EACH)|
|1012||Floor Sander Belt HT8 EX 40G - FOR 7006EX, 7006EXMS - Models Only Box QTY = 5 Pcs (Priced as EACH)|
|1014||Floor Sander Belt HT8 EX 60G - FOR 7006EX, 7006EXMS - Models Only Box QTY = 5 Pcs (Priced as EACH)|
|1015||Floor Sander Belt HT8 EX 80G - FOR 7006EX, 7006EXMS - Models Only Box QTY = 5 Pcs (Priced as EACH)|
|1016||Floor Sander Belt HT8 EX 100G - FOR 7006EX, 7006EXMS - Models Only Box QTY = 5 Pcs (Priced as EACH)|
|1017||Floor Sander Belt HT8 EX 120G - FOR 7006EX, 7006EXMS - Models Only Box QTY = 5 Pcs (Priced as EACH)|