Every table saw owner has run into this you need to cut a few 4x8 sheets, but cant find anyone to help you. So you setup an unwieldy, dangerous support well,
those days are over. This Table Saw Extension by HTC is exactly what you need. This heavy duty outfeed roller support attaches to the back of your table saw, and allows you to handle large sheets
of material safely and easily without a helper! The ball bearing rollers make feeding a breeze, while staying out of your way (the unit even folds down when not in use). With an extended
measurement of 37x31, it allows your table saw to handle bigger material. Youll rip and crosscut with ease. Fits most brands of 10 inch table saw cabinets, and is perfect for contractors,
woodworkers, and DIY enthusiasts. In fact, if you have a table saw, this is the one accessory you cant be without.
|
|
Table Saw Extension HTC HOR-1038 37 inch Outfeed Roller Support Table for Table Saws. Supports Panels Up To 8 Feet in Length, Making One Person Table
Saw Operation Easy.
-
Supports Up To 8 ft Panels Need to cut full sheets of paneling, plywood, or other material? No problem - this is the table saw extension youve been
looking for.
-
Simple To Use Attaches directly to your table saw, and allows for easy one-person handling of large material. One person can even handle 4x8
material alone.
-
New For 2014 Advanced outfeed roller design allows for straight, level feeding. Reduces kickbacks, blade jams, and binding.
-
Heavy Duty Measures 37 by 31-inches, and supports plywood and other material 4 past the blade. Material can weigh up to 200 lbs.
-
Space Saving Folds down for compact storage. Fully adjustable to easily handle almost any size material.
SKU: HOR-1038
|
The HTC Bench Grinder Stand features a 500-pound weight capacity with an 8.5 by 9.5- nch top. The top is pre-drilled and slotted to accept most bench top grinder
models including Baldor, Delta, and more. Other features include a 25 to 41 inch height adjustment, non-skid leveling feet, and an exclusive wedge lock inner support design. Locking casters can
be added for convenient rolling mobilization (sold separately)
|
|
HTC HGP-10 Bench Top Grinder Stand, Adjustable Height
- Stable Wide Stance Base with four adjustable feet
- Works with most bench grinders
- Exclusive wedge-lock, adjusts for optimum height
- 8.5 inch by 9.5 inch mounting plate
SKU: HGP-10
|
Constructed of heavy gauge steel, HTCs patented HTT31 Tool Table features a 14 x 25-inch top that can divide into two pieces for expansion, and it offers a handy
ruler imprint on the surface. The MDF top is complemented by a lower shelf that measures 18 x 27 inches, rubber feet for non-skid support, and a tough, powder coat finish. With a working height of
31 inches and a maximum weight capacity of 500 pounds., the HTT31 is the perfect tool table for all your workshop needs. For added convenience, the optional I style HTC HRUS-330 Mobile Base can be
added for portability
|
|
HTT-31 TOOL TABLE FOR POWER AND BENCH TOP TOOLS
-
Expandable 14 Inch by 25-Inch MDF top with handy ruler imprinted on top side
-
18 Inch by 27 Inch MDF lower shelf
-
Heavy Duty steel frame with tough powder coat finish
-
31 Inch height 500 Pound capacity with rubber feet for non-skid support
-
Lifetime warranty
SKU: HTT-31
|
The drill press roller support makes it safer and easier to work with large, heavy work pieces. Easily attaches to any drill press with a 2-1/2 to 4 diameter column.
Featuring two adjustable supports that extend to 28 on both sides of your machines centerline providing a stable 56 wide work surface. 9" of vertical adjustment for accurate leveling. Each 10 wide
support is a galvanized steel ball bearing roller that makes easy work of moving stock through the operation. All components adjust easily with large plastic knobs. Includes a 3 x 10 accessory tray
for holding your drill bits or chuck key.
|
|
DRILL PRESS SUPPORT
- Drill press support will fit all drill presses with a column size of 2 1/4 inch to 4 1/2 inch diameter
- Quick release from drill press
- Tool Tray holds spare drill bits and drill chucks
- Telescoping outriggers that extend 28 inch from center to 56 inch overall
- 1-3/8 inch diameter x 10 inch support rollers
SKU: PM-128
|
TS-9030 HTC Tool Saver Set, Small/Medium/Large, 3-Piece
SKU: TS-9030
