7968
Call 1–800–458–3687 or  Email us!

Imer Mortar, Stucco, Grout and Concrete Pumps

Mighty Small 50 Step-Up 120 Series Silent 300 Prestige
Mighty Small 50
Progressive Cavity Pump 		Step-Up 120 Series
Progressive Cavity Pump 		Silent 300 Prestige
Progressive Cavity Pump
Koine 4 Koine 35 Booster 15
Koine 4
Continiuous Pumps 		Koine 35
Continiuous Pumps 		Booster 15
Piston Pump

 

Models And Accessories
KOINE 35
1106315 KOINE 35 - 5 HP, Single Phase
1107029 STANDARD ROTOR - D8 - 1.5 Rotor with tab
1107028 STANDARD STATOR - D8 - 1.5 Stator
1107637 Dual-diaphragm compressor
1107532 52 x 13 mm Air hose w/Geka
1107531 33 x 25 mm Air hose w/Geka
1107005 Mortar, stucco, and fireproofing gun kit
1107010 Stucco and fine coatings gun kit
1107085 D5 - 2.5 Rotor (requires manifold - part # 3223416)
1107084 D5 - 2.5 Stator (requires manifold - part # 3223416)
1107031 D8 - 1.5 Rotor (requires manifold - part # 3223416)
1107030 D8 - 1.5 Stator (requires manifold - part # 3223416)
3223416 Manifold for D Series stators
1107597 SLU mixing paddle
1107549 5 Overhead wand
1107525 50 x 25 mm Material hose
1107526 33 x 25 mm Material hose
1107527 16  x 25 mm Material hose
KOINE 4
1106304 KOINE 4 - 220V/60Hz, 9 HP, 3 Phase
1107623 STANDARD ROTOR - R8 - 1.5 Rotor with tab
1107622 STANDARD STATOR - R8 - 1.5 Stator
1107680 Dual-diaphragm compressor, 3 phase
1107532 52 x 13 mm Air hose w/Geka
1107531 33 x 25 mm Air hose w/Geka
1107005 Koine gun kit
1107549 5 Overhead wand
1107528 33 x 35 mm Material hose
1107565 35 mm - 25 mm Reducer
1107664 R7 - 1.5 Rotor with tab
1107624 R7 - 1.5 Stator
1107667 R7 - 2.5 Rotor with tab
1107668 R7 - 2.5 Stator
1107541 Mixing paddle for light materials
1107641 Spray gun for Koine
MIGHTY SMALL 50
1106344 MIGHTY SMALL 50 EVO - 110V/60Hz, 1.75 HP
1106345 MIGHTY SMALL 50 PLUS - 220V/60Hz, 3 HP, Single Phase
1107031 STANDARD ROTOR - D8 - 1.5 Rotor
1107030 STANDARD STATOR - D8 - 1.5 Stator
1107546 Dual-diaphragm compressor
1107532 53 x 13 mm Air hose w/Geka
1107531 33 x 25 mm Air hose w/Geka
1107005 Mortar, stucco, and fireproofing gun kit
1107010 Stucco and fine coatings gun kit
1107006 Grout injection kit
1107504 Tuckpointing gun kit with 19 mm reducers (hose not included)
1107529 33 x 19 mm Material hose
1107525 50 x 25 mm Material hose
1107526 33 x 25 mm Material hose
1107527 16 x 25 mm Material hose
1107549 5 Overhead wand
1107015 Vibrating hopper for tuckpointing
1107548 Vibrating screen for bulk sand mixes
1107570 Pipe hook for block, form and door jamb filling
1107085 D5 - 2.5 Rotor
1107084 D5 - 2.5 Stator
1107669 Small 50 Plus - Airless spray kit
1106340 Spin 15A Mixer (for 110V)
1106152 Spin 30 Plus Mixer (for 220V)
STEP-UP 120
1106180 STEP-UP 120 - 220V/60Hz, 3 HP, Single Phase
1107111 STANDARD ROTOR - IM25L Rotor
1107110 STANDARD STATOR - IM25L Stator
1107602 Dual-diaphragm compressor
1107532 53 x 13 mm Air hose w/Geka
1107531 33 x 25 mm Air hose w/Geka
1107633 Non-towing wheel kit
1107596 Step-Up 120 pan mixer, Single Phase
1107574 120 Remote control
1107544 Remote control extension cable
1106152 Spin 30 continuous mixer with iDust grate
1107528 33 x 35 mm Material hose
1106178 50 mm to 35 mm material hose reducer
1107592 Vibrating grate
1107088 2L6 Rotor/stator kit
1107577 Spray gun Step-Up 120
1107161 Pintle tow ring
1107549 5 Overhead wand (requires reducer hose - part # 1107074)
1107074 16 x 35 mm male to 25 mm male hose
STEP-UP 120
1106181 STEP-UP 120 - 220V/60Hz, 7.5 HP, 3 Phase
1107111 STANDARD ROTOR - IM25L Rotor
1107110 STANDARD STATOR - IM25L Stator
1106152 Spin 30 continuous mixer withSpin 30 continuous mixer with iDust grate
1107509 Step-Up 120 pan mixer, 3 phase (requires part # 1107574)
1107574 120 Remote control
1107544 Remote control extension cable
1107585 Piston compressor, 3 phase
1107532 53 x 13 mm Air hose w/Geka
1107531 33 x 25 mm Air hose w/Geka
1107088 2L6 Rotor/stator kit
1107090 60.12 Rotor/stator kit
1107592 Vibrating grate
1107660 L7-1.5 Rotor/stator kit
1107528 33 x 35 mm Material hose
1107533 33 Material hose  50 mm (2)w/cam couplings
1106178 couplings50mm to 35 mm Material hose reducer
1107633 Non-towing wheel kit
1107577 Spray gun step 120
1106250 Shotcrete gun
1107549 5 Overhead wand
1107074 16- x 35 mm male to 25 mm male hose
1107161 Pintle tow ring
STEP-UP 120 A
1106054 STEP-UP 120 A - 220V/60Hz, 10 HP, 3 Phase
1107083 STANDARD ROTOR - 60.12 Rotor
1107081 STANDARD STATOR - 60.12 Stator
1107633 Non-towing wheel kit
1107528 33 of  35 mm Material hose
1107533 33 of  50 mm Material hose
1107569 Standard grate for premixed material
1106178 50 mm to 35 mm material hose reducer
1106250 Shotcrete gun
1107161 Pintle tow ring
1107088 2L6 Rotor/stator kit
1107149 IM25L Rotor/stator kit
RESTIGE 300
1106433 PRESTIGE 300 - 24 HP Yanmar Diesel - includes 2L6 Rotor/Stator
1107078 STANDARD ROTOR - 2L6 Rotor
1107077 STANDARD STATOR - 2L6 Stator
1107528 33 of 1/2 35 mm hose
1107533 33 of 1/2 50 mm hose
1107209 Aqua Control Electronic Meter System
1107036 Vibrating grate
1107086 Four-function remote control w/ 164 cable
1107149 IM25L Rotor/stator kit
1107090 60.12 Rotor/stator kit
1106178 50 mm to 35 mm material hose reducer
1107577 Spray gun 35 mm
1107074 16 x 35 mm male to 25mm male hose
1107161 Pintle tow ring
1106250 Shotcrete gun
1107001 5 Function radio remote
1107208 Hydraulic power washer
1107549 5 Overhead wand
1107532 53 x 13 mm Air hose w/Geka
1107531 33 x 25 mm Air hose w/Geka
Booster 20
1106427 Booster 20 28 HP Piston Pump with 1/2 Valve
1107171 Hydraulic power washer
1107001 5 Function radio remote
1107086 Four-function remote control w/ 164-1/2 cable
1107196 Rubber hopper extension kit (13 cu ft)
1107197 Steel hopper extension kit (17 cu ft)
Pump Rotors and Stators
1107085 D5 - 2.5 Rotor
1107084 D5 - 2.5 Stator
1107031 D8 - 1.5 Rotor
1107030 D8 - 1.5 Stator
1107029 D8 - 1.5 Rotor with tab
1107028 D8 - 1.5 Stator
1107664 R7 - 1.5 Rotor with tab
1107624 R7 - 1.5 Stator
1107667 R7 - 2.5 Rotor with tab
1107668 R7 - 2.5 Stator
1107623 R8 - 1.5 Rotor with tab
1107622 R8 - 1.5 Stator
1107078 2L6 Rotor
1107077 2L6 Stator
1107088 2L6 Rotor / Stator kit
1107149 IM25L Rotor / Stator kit
1107111 IM25L Rotor
1107110 IM25L Stator
1107083 60.12 Rotor
1107081 60.12 Stator
1107090 60.12 Rotor / Stator kit
1107219 L7 - 1.5 Stator
1107218 L7 - 1.5 Rotor
Mixer oaddles and accessories
1107542 Standard mixing paddle
1107597 SLU mixing paddle for light materials (Koine 35)
1107541 Mixing paddle for light materials (Koine 4)
Pump Accessories
1107517 Turbo mixer kit (Koine 4)
3223416 Manifold for D-series stators (Koine 35)
Pump Spray Guns
1107540 Spray gun complete with deflector  14 mm
1107549 5 Overhead wand
1107577 Spray gun for mortar and fireproofing  35 mm (1-3/8)
1106250 Shotcrete gun
1107641 Low volume shotcrete gun  35 mm (1-3/8) female
1107011 Stucco and fine coatings gun
Pump Spray Gun Kits
1107005 Mortar, stucco, and fireproofing gun kit
1107006 Grout injection kit
1107009 Paint and elastomeric gun kit
1107010 Stucco and fine coatings gun kit
1107504 Tuckpointing gun kit
Pump Spray Gun Components
1107551 Deflector  10 mm (3/8) (Duse) for premixed plaster
1107552 Deflector  12 mm (1/2) (Duse) for premixed plaster
1107553 Deflector  14 mm (9/16) (Duse) for premixed plaster
1107554 Deflector  16 mm (5/8) (Duse) for premixed plaster
1107557 Deflector  10 mm (3/8) of polyurethane traditional plaster
1107558 Deflector  12 mm (1/2) of polyurethane traditional plaster
1107559 Deflector  14 mm (9/16) of polyurethane traditional plaster
1107560 Deflector  16 mm (5/8) of polyurethane traditional plaster
1107561 Deflector  5 mm (3/16) hardened steel - painting, smoothing and spacing
1107562 Deflector  6 mm (1/4) hardened steel - painting, smoothing and spacing
1107563 Deflector  8 mm (5/16) hardened steel - painting, smoothing and spacing
1107564 Deflector  12 mm (1/2) hardened steel - painting, smoothing and spacing
1107604 Deflectors  5 mm (3/16) -6 mm (1/4) -8 mm (5/16)-12 mm (1/2) -16 mm (5/8)
1107567 Kit with 1 deflector + 5 hose connectors 16 mm + 5 hose connectors  13 mm
1107566 With hose connector 16 mm (5/8)
Material Hose Cleaning Sponge Balls
1107519 Sponge for cleaning hose 25 mm (1)
1107520 Sponge for cleaning hose  35 mm (1-3/8)
1107521 Sponge for cleaning hose 50 (2)
1107522 Sponge for cleaning hose  35 mm (1-3/8)
3225846 Small 50 hopper cap - washing sponge  40 (2-3/8)
1107183 Cleaning balls for hose  100 mm (4)
Material Hoses
1107525 50 Material hose 25 mm (1) w/cam couplings
1107526 33 Material hose 25 mm (1) w/cam couplings
1107527 16 Material hose  25 mm (1) w/cam couplings
1107528 33 Material hose  35 mm (1-3/8) w/cam couplings
1107529 33 Material hose  19 mm (3/4) w/cam couplings
1107533 33 Rubber hose  50 mm (2)w/cam couplings
1107534 66 Rubber hose  50 mm (2) w/cam couplings
Material Hose Cleaning Fittings
1107103 Cleaning Kit for cleaning hose  25 mm (1)
1107087 Cleaning Kit for cleaning hose  35 mm (1-3/8)
1107104 Cleaning Kit for cleaning hose  50 mm (2)
Material Hoses with diameter reduction fitting
1107074 16 Material hose - 35 mm (1-3/8) male to 25 mm (1) male hose w/cam couplings
1107075 66 Material hose - 50 mm (2) male to 35 mm (1-3/8) female hose w/cam couplings
Compressors
1107546 Dual-diaphragm 115V/60Hz (Small 50)
1107637 Dual-diaphragm 220V/60Hz (Koine 35)
1107680 Dual-diaphragm 220V/60Hz, 3 phase (Koine 4)
1107602 Dual-diaphragm 220V/60Hz (Koine 35 and Step-Up)
1107585 Piston compressor, 3 phase (Step-Up)
Remote Controls and Extensions
1107574 Remote control w/120 cable (Small 50 and Step-Up)
1107086 Four-function remote control w/ 164 cable (Prestige and Booster)
1107001 Five-function radio remote control (Prestige and Booster)
1107545 Remote control w/50 cable
1107544 Remote control extension cable
Air Hoses
1107532 53 x 13 mm Air hose w/Geka couplings
1107531 33 x 25 mm Air hose w/Geka couplings
FITTINGS and COUPLINGS
1107565 35 mm (1-3/8) - 25 mm (1) Reducer(FDN35-MDN25)
1106178 50 mm (2)- 35 mm (1-3/8) Reducer (MDN50-FDN35) -
3224382 Geka Coupling w/female thread 1/2 - FITTINGS and COUPLINGS
3223636 Geka Coupling w/female thread 3/4 - FITTINGS and COUPLINGS
3223428 Geka Coupling w/female thread 1 - FITTINGS and COUPLINGS
3224203 Geka Coupling w/male thread 1/2 - FITTINGS and COUPLINGS
3223614 Geka Coupling w/male thread 3/4 - FITTINGS and COUPLINGS
3223722 Geka Coupling w/male thread 1 - FITTINGS and COUPLINGS
3224706 Camlock Coupling  19 mm (threaded 3/4) female - FITTINGS and COUPLINGS
3224709 Camlock Coupling  25 mm (threaded 1) female - FITTINGS and COUPLINGS
3223704 Camlock Coupling  35 mm (threaded 1-1/4)female - FITTINGS and COUPLINGS
3224492 Camlock Coupling  50 mm (threaded 2) female - FITTINGS and COUPLINGS
3224328 Camlock Plug  19 mm (3/4 female thread) - FITTINGS and COUPLINGS
3223721 Camlock Plug  25 mm (1 emale thread) - FITTINGS and COUPLINGS
3223703 Camlock Plug  35 mm (1-1/4 male thread) - FITTINGS and COUPLINGS
3224361 Camlock Plug  35 mm (1-1/4 female thread) - FITTINGS and COUPLINGS
3223818 Camlock Plug  50 mm (2 female thread) - FITTINGS and COUPLINGS
3224701 Camlock Coupling  25 mm (1 female thread) plastic - FITTINGS and COUPLINGS
1107570 Pipe hook for block, form, and door jamb filling - FITTINGS and COUPLINGS
GRATES, SCREENS and HOPPER ACCESSORIES
1107015 Vibrating hopper for tuckpointing, 110V 60Hz (Small 50)
1107548 Vibrating screen for bulk sand mixes, 115V/60 Hz (Small 50)
1107592 Vibrating grate, 230V/60Hz (All Step-Up)
1107036 Vibrating grid (Prestige)
1107569 Grate for premixed materials (All Step-Up)
1107491 iDUST dust free grate (Koine 35 and 4)
1107196 Rubber hopper extension kit (13 cu ft) (Booster)
1107197 Steel hopper extension kit (17 cu ft) (Booster)
TOWING ACCESSORIES
1107633 Non-towing wheel kit (Step-Up)
1107161 Pintle tow ring (Step-Up and Prestige)
MATERIAL and WATER METERS
1107209 Aqua Control Electronic Meter System (Prestige)

 

mighty small 50
The Most Versatile Pump and Spray Machine on the Market 
The Mighty Small 50 EVO and PLUS models are an easily portable multi-purpose pump and spray machine. You may configure the pump with many different accessories depending on the required application. Whether it is pumping grout into forms, on a bridge deck repair project, spraying fireproofing on a high-rise building, or filling blocks with grout, our pumps are the right solution when you have a rigorous pumping application.
 
Mighty Small 50 EVO and PLUS
  • Rotor and stator D8 1.5
  • Stainless steel hopper
  • Inverter driven control panel
  • Electric remote control cable
  • Pressure gauge for material pressure
  • Accessory toolbox
Mighty Small 50 Airless Spray Kit
  • Stator 4N13S - Part number 1107220
  • Rotor 4N13S - Part number 1107221
  • AG19 Gun - Part # 1107643
  • Nozzle kit (Nozzles; 617 Part number 1107644, 619 Part number 1107645, 531 Part number 1107646, and 335 Part number1107649)
  • Filter kit (10 pcs kit green airless filter - Part number 1107650) and 10 pcs kit white airless filter - Part number 1107651)
  • Safety sensor, pressure gauge and cable
  • 66’ Airless hose (1/2 inch) - Part number 1107654
  • Gun cleaning kit - Part number 1107658
Optional Equipment
  • Dual diaphragm compressor - Part number 1107546
  • Mortar, stucco and fireproofing gun kit - Part number 1107005
  • Paint and fine coatings gun kit - Part # 1107010
  • Grout injection kit - Part number 1107006
  • Tuck pointing gunkit - Part number 1107504
  • 50’ x 25mm material hose - Part number 1107525 
  • 33’ x 25mm material hose - Part number 1107526 
  • 16’ x 25mm material hose - Part number 1107527
  • 5’ overhead wand - Part number 1107549
  • Vibrating hopper for tuckpointing - Part number 1107015​
  • Vibrating screen for bulk sand mixes - Part number 1107548​
  • Pipe hook for block, form and door jamb filling - Part number 1107570
  • D5 - 2.5 Rotor - Part number 1107085
  • D5 - 2.5 Stator - Part number 1107084
  • Small 50 Plus - Airless spray kit - Part number 1107669
EVO Model # 1106344   -  110V/60Hz, 1.75 HP
PLUS Model # 1106345   -   230V/60Hz, 3 HP, Single Phase
 
Specifications
Model Small 50 Evo Small 50 Plus
Power supply 110v / 60Hz 230v / 60 Hz
Pump motor 1.75 hp 3 hp
Material flow rate 1.7 - 30 cu ft / hr 1.7 - 54 cu ft / hr
Max. aggregate size 3/16 in 1/4 in
Max. pumping distance hose w/grout 100 ft 150 ft
Max. pumping distance hose w/SLU 150 ft 200 ft
Hopper capacity CF 1.75 cu ft
Loading height  (in) 25-1/2
Dimensions  (in) 20-1/2 W x 44 L 25-1/2 H
Weight 90 lbs 100 lbs
Sound pressure level < 74 dB(A)

 

 

step up 120
Step-Up 120 Series 1ph Spray and Grout Pumps
When you need more power to push through stiffer material or need more volume, then look no further than the Step-Up 120 series of pumps. The Step-Up 120 is a towable but very compact pump suited for unique pumping situations and environments. These pumps are extremely versatile. Pump or spray mortars, stuccos, grouts, restoration mortars, underlayments, fireproofing, waterproofings, along with many other materials. Shown with the Step-Up 120 pan mixer for continuous mixing and pumping. 
 
Step-Up 120 Series 3ph Spray and Grout Pumps
Pump or spray mortars, stuccos, grouts, restoration mortars, underlayments, fireproofing, waterproofings and many other materials. The 3 phase power gives you more horsepower to push material further and with more flow. The 3 phase pump grouts with 3/8 inch aggregates.

Model number 1106180   |   220V/60Hz, 3 HP,  Single Phase
Model number 1106181   |     220V/60Hz, 7.5 HP,  3 Phase
 
Standard Euipment
  • Inverter Control panel (1ph)
  • 2 speed Control panel (3ph)
  • 66’ power cord
  • 66’ of water hose  19 mm (3/4 inch)
  • Remote control ready
  • 3 hp Single-Phase 100 percent duty cycle motor (1ph)
  • 5 hp / 7.5, 2 speed, 3 phase 100 percent duty cycle motor (3ph)
  • IM25L rotor/stator
  • Tow kit
  • Grate for premixed materials
  • Accessory tool box
Optional Equipment 1ph)
  • Dual diaphragm compressor - Part number 1107602
  • Non-towing wheel kit - Part number 1107633
  • Step up 120 pan mixer - Part number 1107596
  • Spin 30 continuous mixer with iDust grate - Part number 1106152
  • 33’ x 35mm hose - Part number 1107528 
  • 50mm to 35mm material hose reducer - Part number 1106178 
  • Vibrating grate - Part number 1107592
  • 120’ remote control - Part number 1107574
  • 2L6 rotor/stator kit - Part number 1107088
  • Spray gun 35mm male - Part number 1107577
  • Pintle tow ring - Part number 1107161
  • 5’ overhead wand - Part number 1107549
  • 16’ x 35mm male to 25mm male hose - Part number 1107074
Optional Equipment 3ph
  • Spin 30 continuous mixer with iDust grate - Part number 1106152
  • Step-Up 120 pan mixer, 3 phase - Part number 1107509
  • Piston compressor, 3 phase - Part number 1107585
  • 2L6 Rotor/stator kit - Part number 1107088
  • 60.12 Rotor/stator kit - Part number 1107090
  • Vibrating grate - Part number 1107593
  • 33’ x 35mm hose - Part number 1107528 
  • 33’ x 50mm hose - Part number 1107533
  • 50mm to 35mm material hose reducer - Part number 1106178 
  • 120’ Remote control - Part number 1107574
  • Included with mixer - Part number 1107509
  • Non-towing wheel kit - Part number 1107633
  • Spray gun step 120 - Part number 1107577
  • Shotcrete gun - Part number 1106250
  • 5’ overhead wand - Part number 1107549
  • 16’ x 35mm male to 25mm male hose - Part number 1107074
  • Pintle tow ring - Part number 1107161
Specifications
Model STEP-UP 120 1ph STEP-UP 120 3ph
Motor power rate 3 hp 7.5 hp
Mixer power rate 2 hp 2 hp
Electric compressor 1 hp / 9 cfm 3 hp / 11 cfm
Max aggregate size 1/4 in 3/8 in
Maximum flow rate 1.5 cu yd -
Maximum flow rate IM25L - 2.75 cu yd
Maximum flow rate 60.12 - 6 cu yd
Maximum flow rate 2L6 - 2.35 cu yd
Horizontal pumping distance 200 ft 300 ft
Vertical pumping distance 100 ft 200 ft
Hopper capacity 4.25 cu ft 4.25 cu ft
Dimensions 33 W x 80 L x 38 H in 33 W x 80 L x 38 H in
Weight 616 lbs. 616 lbs
(The pumping distance will vary depending upon the type of material being used)

 

silent 300 prestige
A Masterpiece of Pump Engineering in a Small Package
The Silent 300 Prestige is a diesel-powered multi-purpose pump and spray machine with a built-in 6.3 cubic foot hydraulic mixer and onboard compressor for spraying. The military spec control panel integrates all these functions in one location to allow operators to quickly and easily learn to operate the pump. Known for its versatility, the Prestige is designed to use different rotor/stator combinations for pumping a variety of materials - including up to 3/8 inch aggregate.

PRESTIGE 300
Model number 1106133   |   24 HP Yanmar Diesel
 
Standard Equipment
  • 24 HP Yanmar diesel engine
  • 14 CF/m compressor 
  • 2L6 screw pump
  • 2 clean-out sponges
  • High shear hydraulic mixer
  • Variable speed hydraulic pump
  • Programmable mixer timer
  • Metal accessory box
  • Tow package for highway use
 
Optional Equipment
  • 33’ of  35mm hose - Part number 1107528 
  • 33’ of  50mm hose - Part number 1107533
  • Aqua Control Electronic Meter System - Part number 1107209 
  • Vibrating grate - Part number 1107036
  • 164’ remote control - Part number 1107086 
  • IM25L rotor/stator kit - Part number 1107149
  • 60.12 Rotor/stator kit - Part number 1107090
  • L7-1.5 Rotor/stator kit - Part number 1107660
  • 50mm to 35mm material hose reducer - Part number 1106178 
  • Spray gun step 120 - Part number 1107577
  • 16’ x 35mm male to 25mm male hose - Part number 1107074
  • Pintle tow ring - Part number 1107161
  • Shotcrete gun - Part number 1106250
  • 5 Function radio remote - Part number 1107208
  • Hydraulic power washer - Part number 1107171
  • 5’ overhead wand - Part number 1107549
PRESTIGE 300
Engine - Diesel Yanmar, 24 hp
Compressor flow rate 14 cf/m
Max pumpable aggregate size IM25L 3/8 in
Variable flow rate 60.12 6 yd / hr
Variable flow rate IM25L 4 yd / hr
Variable flow rate 2L6 3 yd / hr
Max pressure 2L6 580 psi
Hopper capacity 7 cu ft
Mixer capacity 6.3 cu ft
Dimensions 131-1/2 W x 55-1/2 L x 53 H in
Weight 1,653 lbs

 

koine 4 pump

A Powerful, Versatile High Flow Continuous Pump
The Koine 4 continuous mixer - pump is designed to provide more volume and production. The Koine 4 is used almost exclusively for mixing and pumping wall grouts and self-leveling underlayments for those projects where you need tremendous production. The Koine series of pumps are quiet, perfect for indoor applications.

Standard Equipment

  • Dust grate with vacuum port
  • R8 Stator and rotor with tab
  • Turbo mixer kit
  • Material delivery pressure gauge
  • Gear driven feed impeller
  • Self-priming stainless steel water pump
  • 35mm hose clean-out adapter
  • ​Water system with flow meter and no freeze discharge valve
  • 130’ electric cord
  • 130’ water hose  19 mm (3/4 inch)
  • 33’ material hose  35 mm (1-3/8 inch) with quick connects
  • Integrated tool storage box 
  • Clean up kit (scraper and sponge)

Optional Equipment

  • Dual diaphragm compressor, 3 phase - Part number 1107680
  • Koine gun kit - Part number 1107005
  • 5’ overhead wand - Part number1107549
  • 33’ x 35mm hose - Part # 1107528 
  • 35mm - 25mm Reducer - Part number 1107565 
  • R7 - 1.5 rotor with tab - Part number 1107625
  • R7 - 1.5 stator - Part number 1107624
  • R7 - 2.5 rotor with tab - Part number 1107623
  • R7 - 2.5 stator - Part number 1107622
  • Mixing paddle for light materials - Part number 1107541  
  • Spray gun 35mm female - Part number 1107641

Model number 1106004   |   220V/60Hz, 9 HP,  3 Phase

KOINE4
Power 220v/60Hz, 3 phase
Total machine power 9 hp
Drive motor power 7.5 hp
Feeding impeller motor 1 hp
Water booster pump 1 hp 70 psi boost
Material flow rate 140 cu ft / h
Max. pumping distance - grouting/fireproofing 200 ft +
Max. pumping distance - self-leveling 300 ft +
Gearbox speed 400 rpm Loading height 35-1/2 in
Dimensions 29 W x 47 L x 61-1/2 H in
Weight 574 lbs

                                                                                                                      

konie 35 pump
Continuous Operation Means Efficient and Effective Production
The Koine 3.5 mixer and pump is one of the most advanced and versatileproduction pumps on the market today. It is packed with features that allow it tackle a multitude of applications, yet it is compact and highly portable, making it perfect for interior or high-rise building work. The only machine capable of continuous mixing, spraying, and pumping of pre-blended cementitious and gypsum-based mortars, stucco, fireproofing, self-leveling underlayments, and grouts.
 
Standard Equipment
  • Dust Grate with Vacuum port
  • D8 1.5 stator and rotor
  • Material delivery pressure gauge
  • Control panel w/ exclusive IMER 4 speed inverter
  • Self-priming water booster pump
  • Water system with flow meter and discharge valves
  • 66’ of power cord
  • 66’ of water hose  19 mm (3/4 inch)
  • 50’ of material hose  25 mm (1 inch)
  • Hose cleaning kit with toolbox
  • Mixing chamber clean out tool
  • Air compressor ready
 
Optional Equipment
  • Dual diaphragm compressor -Part number 1107637 
  • Mortar, stucco and fireproofing gun kit -Part number 1107005
  • D5 - 2.5 Rotor -Part number1107085
  • D5 - 2.5 Stator -Part number 1107084
  • Turbo mixer (use with Part number 1107029 and 1107028) -Part number 1107517
  • 50’ x 25mm material hose - Part number 1107525 
  • 33’ x 25mm material hose - Part number 1107526 
  • 16’ x 25mm material hose - Part number 1107527 
  • 5’ overhead wand - Part number 1107549
  • D8 - 1.5 Rotor with tab  - Part number 1107029
  • D8 - 1.5 Stator - Part number 1107028
  • SLU mixing paddle for light materials - Part number 1107597

Model number 1106051   |   5 HP, Single Phase
KOINE 35
Power supply 220v/60Hz, single-phase
Total machine power requirement 5 hp
Drive motor 3 hp
Feeding impeller motor 1/2 hp
Water pump 1 hp
Material flow rate Up to 60 cu ft/hr
Maximum pumping distance 300 ft
Loading height 36 in
Dimensions 27 W x 62 L x 47 H in
Weight 510 lbs

 

booster 15 pump

Compact Towable High-Performance Diesel Concrete Pump
2-cylinder piston pump with S Valve
Its compact size makes the Booster able to function in limited space job site areas where no other pumps of its capability could fit. This pump was designed and built to provide up to 20 cubic yards per hour of concrete, shotcreting and high strength grouts.

Standard Equipment

  • 3-cylinder liquid cooled diesel engine, YANMAR
  • Automatic greasing system
  • Concrete hopper with agitator
  • Vibrating grid, 12V 
  • Hydraulic system with reverse
  • Pumping unit with S-valve with automatic compensation of clearance and wear
  • 3-cylinder liquid cooled diesel engine, YANMAR
  • Automatic greasing system
  • Concrete hopper with agitator
  • Vibrating grid, 12V 
  • Hydraulic system with reverse
  • Pumping unit with S-valve with automatic compensation of clearance and wear

Optional Equipment

  • Hydraulic power washer - Part number 1107208
  • 5 Function radio remote - Part number 1107001
  • 4 function remote control - Part number 1107086
  • Rubber hopper extension kit (13 cu ft) - Part number 1107196
  • Steel hopper extension kit (17 cu ft) - Part number 1107197
  • Fast setting additive kit - Part number 1107634
  • Concrete starter pumping kit - Part number 1106123
  • Shotcrete starter kit - Part number 1106124


Model number 1106126   |   28HP Piston Pump

 BOOSTER 15
Diesel engine 3-cylinder Yanmar 3TNV80F-SMIMI
Installed power rate  28 hp
Pumping system 2-cylinder with hydraulic control
Max aggregate size 1 in
Flow rate 3 - 20 cu yd / hr
Pumping pressure 1,000 psi
Pipe outlet Heavy Duty 4 in
Hopper capacity  7 cu ft
Loading height  42-1/2 in
Length 161 in
Width 58 in
Height 60 in
Weight 3,100 lbs

 

1106315
KOINE 35 - 5 HP, 240V SINGLE PHASE
Mfg. item #: 1106315
IMR1106315
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

150
1107029
D8 - 1.5 ROTOR WITH TAB
Mfg. item #: 1107029
IMR1107029
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

150
1107028
D8 - 1.5 STATOR
Mfg. item #: 1107028
IMR1107028
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

150
1107637
DUAL-DIAPHRAGM 220V/60HZ (KOINE 35)
Mfg. item #: 1107637
IMR1107637
lease to own for as little as:$53 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$2,659.00

150
1107532
53Õ X 13 MM AIR HOSE W/GEKA COUPLINGS
Mfg. item #: 1107532
IMR1107532
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$249.00

150
1107531
33Õ X 25 MM AIR HOSE W/GEKA COUPLINGS
Mfg. item #: 1107531
IMR1107531
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$169.00

150
1107005
MORTAR, STUCCO, AND FIREPROOFING GUN KIT
Mfg. item #: 1107005
IMR1107005
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$939.00

150
1107010
STUCCO AND FINE COATINGS GUN KIT
Mfg. item #: 1107010
IMR1107010
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$1,479.00

150
1107085
D5 - 2.5 ROTOR (REQUIRES MANIFOLD -
Mfg. item #: 1107085
IMR1107085
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

150
1107084
D5 - 2.5 STATOR (REQUIRES MANIFOLD
Mfg. item #: 1107084
IMR1107084
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

150
1107031
D8 - 1.5 ROTOR (REQUIRES MANIFOLD -
Mfg. item #: 1107031
IMR1107031
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

150
1107030
D8 - 1.5 STATOR (REQUIRES MANIFOLD
Mfg. item #: 1107030
IMR1107030
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

150
3223416
MANIFOLD FOR D-SERIES STATORS (KOINE 35)
Mfg. item #: 3223416
IMR3223416
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$859.00

150
1107597
SLU MIXING PADDLE FOR LIGHT MATERIALS (KOINE 35)
Mfg. item #: 1107597
IMR1107597
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$329.00

150
1107549
5Õ OVERHEAD WAND
Mfg. item #: 1107549
IMR1107549
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$569.00

150
1107525
50Õ MATERIAL HOSE ¯ 25 MM (1") W/CAM COUPLINGS
Mfg. item #: 1107525
IMR1107525
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$479.00

150
1107526
33Õ MATERIAL HOSE ¯ 25 MM (1") W/CAM COUPLINGS
Mfg. item #: 1107526
IMR1107526
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$379.00

150
1107527
16Õ MATERIAL HOSE ¯ 25 MM (1") W/CAM COUPLINGS
Mfg. item #: 1107527
IMR1107527
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$299.00

150
1106304
KOINE 4 - 208V/60HZ, 9 HP, 3 PHASE
Mfg. item #: 1106304
IMR1106304
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

150
1107623
R8 - 1.5 ROTOR WITH TAB
Mfg. item #: 1107623
IMR1107623
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

150
1107622
R8 - 1.5 STATOR
Mfg. item #: 1107622
IMR1107622
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

150
1107680
DUAL-DIAPHRAGM 220V/60HZ, 3 PHASE (KOINE 4)
Mfg. item #: 1107680
IMR1107680
lease to own for as little as:$59 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$2,959.00

150
1107528
33Õ MATERIAL HOSE ¯ 35 MM (1-3/8") W/CAM COUPLINGS
Mfg. item #: 1107528
IMR1107528
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$539.00

150
1107565
35 MM (1-3/8") - 25 MM (1") REDUCER(FDN35-MDN25)
Mfg. item #: 1107565
IMR1107565
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$159.00

150
1107664
R7 - 1.5 ROTOR WITH TAB
Mfg. item #: 1107664
IMR1107664
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

150
1107624
R7 - 1.5 STATOR
Mfg. item #: 1107624
IMR1107624
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

150
1107667
R7 - 2.5 ROTOR WITH TAB
Mfg. item #: 1107667
IMR1107667
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

150
1107668
R7 - 2.5 STATOR
Mfg. item #: 1107668
IMR1107668
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

150
1107541
MIXING PADDLE FOR LIGHT MATERIALS (KOINE 4)
Mfg. item #: 1107541
IMR1107541
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$349.00

150
1107641
LOW VOLUME SHOTCRETE GUN ¯ 35 MM (1-3/8") FEMALE
Mfg. item #: 1107641
IMR1107641
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$409.00

150
1106344
CALL 800-458-3687 FOR EXPERT ADVICE ON THIS IMER:
MIGHTY SMALL 50 EVO - 120V/60HZ, 1.75 HP
SOUTHERN TOOL SPECIAL: FREE FREIGHT ON THIS IMER PRODUCT - LIMITED TIME OFFER
Mfg. item #: 1106344
IMR1106344
lease to own for as little as:$160 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.11
$7,999.00

150
1106345
CALL 800-458-3687 FOR EXPERT ADVICE ON THIS IMER:
MIGHTY SMALL 50 PLUS - 240V/60HZ, 3 HP, SINGLE PHASE
SOUTHERN TOOL SPECIAL: FREE FREIGHT ON THIS IMER PRODUCT - LIMITED TIME OFFER
Mfg. item #: 1106345
IMR1106345
lease to own for as little as:$174 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.11
$8,699.00

150
1107546
DUAL-DIAPHRAGM 115V/60HZ (SMALL 50)
Mfg. item #: 1107546
IMR1107546
lease to own for as little as:$59 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$2,959.00

150
1107006
GROUT INJECTION KIT
Mfg. item #: 1107006
IMR1107006
lease to own for as little as:$59 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$2,929.00

150
1107504
TUCKPOINTING GUN KIT
Mfg. item #: 1107504
IMR1107504
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$829.00

150
1107529
33Õ MATERIAL HOSE ¯ 19 MM (3/4") W/CAM COUPLINGS
Mfg. item #: 1107529
IMR1107529
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$389.00

150
1107015
VIBRATING HOPPER FOR TUCKPOINTING, 120V 60HZ (SMALL 50)
Mfg. item #: 1107015
IMR1107015
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$1,879.00

150
1107548
VIBRATING SCREEN FOR BULK SAND MIXES, 115V/60 HZ (SMALL 50)
Mfg. item #: 1107548
IMR1107548
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$1,739.00

150
1107570
PIPE HOOK FOR BLOCK, FORM, AND DOOR JAMB FILLING
Mfg. item #: 1107570
IMR1107570
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$199.00

150
1107669
SMALL 50 PLUS - AIRLESS SPRAY KIT
Mfg. item #: 1107669
IMR1107669
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

150
1106340
CALL 800-458-3687 FOR EXPERT ADVICE ON THIS IMER:
SPIN 15 A - CONTINUOUS MIXER FOR PREMIXED MATERIALS AND FINE MORTAR - 120V 1.75 HP
SOUTHERN TOOL SPECIAL: FREE FREIGHT ON THIS IMER PRODUCT - LIMITED TIME OFFER
Mfg. item #: 1106340
IMR1106340
lease to own for as little as:$72 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.11
$3,599.00

150
1106152
CALL 800-458-3687 FOR EXPERT ADVICE ON THIS IMER:
SPIN 30 PLUS - CONTINUOUS MIXER FOR PREMIXED MATERIALS AND FINE MORTAR - 240V, 3 HP SINGLE PHASE
SOUTHERN TOOL SPECIAL: FREE FREIGHT ON THIS IMER PRODUCT - LIMITED TIME OFFER
Mfg. item #: 1106152
IMR1106152
lease to own for as little as:$106 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.11
$5,299.00

150
1106180
STEP-UP 120 - 240V/60HZ, 3 HP, SIN
Mfg. item #: 1106180
IMR1106180
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

150
1107111
IM25L ROTOR
Mfg. item #: 1107111
IMR1107111
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

150
1107110
IM25L STATOR
Mfg. item #: 1107110
IMR1107110
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

150
1107602
DUAL-DIAPHRAGM 220V/60HZ (KOINE 35 & STEP-UP)
Mfg. item #: 1107602
IMR1107602
lease to own for as little as:$54 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$2,679.00

150
1107633
NON-TOWING WHEEL KIT (STEP-UP)
Mfg. item #: 1107633
IMR1107633
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$1,079.00

150
1107596
STEP-UP 120 PAN MIXER, SINGLE PHASE
Mfg. item #: 1107596
IMR1107596
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

150
1107574
REMOTE CONTROL W/120Õ CABLE (SMALL 50 & STEP-UP)
Mfg. item #: 1107574
IMR1107574
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$589.00

150
1107544
REMOTE CONTROL EXTENSION CABLE
Mfg. item #: 1107544
IMR1107544
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$319.00

150
1106178
50 MM (2")- 35 MM (1-3/8") REDUCER (MDN50-FDN35)
Mfg. item #: 1106178
IMR1106178
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$189.00

150
1107592
VIBRATING GRATE, 230V/60HZ (ALL STEP-UP)
Mfg. item #: 1107592
IMR1107592
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$1,059.00

150
1107088
2L6 ROTOR/STATOR KIT
Mfg. item #: 1107088
IMR1107088
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

150
1107577
SPRAY GUN FOR MORTAR AND FIREPROOFING ¯ 35 MM (1-3/8")
Mfg. item #: 1107577
IMR1107577
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$469.00

150
1107161
PINTLE TOW RING (STEP-UP & PRESTIGE)
Mfg. item #: 1107161
IMR1107161
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$169.00

150
1107074
16Õ MATERIAL HOSE - 35 MM (1-3/8") MALE TO 25 MM (1") MALE HOSE W/CAM COUPLINGS
Mfg. item #: 1107074
IMR1107074
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$369.00

150
1106181
CALL 800-458-3687 FOR EXPERT ADVICE ON THIS IMER:
STEP-UP 120 - 208V/60HZ, 7.5 HP, 3 PHASE
SOUTHERN TOOL SPECIAL: FREE FREIGHT ON THIS IMER PRODUCT - LIMITED TIME OFFER
Mfg. item #: 1106181
IMR1106181
lease to own for as little as:$332 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.11
$16,599.00

150
1107509
STEP-UP 120 PAN MIXER, 3 PHASE (REQUIRES PART # 1107574)
CALL 800-458-3687 X1 OR ADD TO CART FOR YOUR EXCLUSIVE BROTHER-IN-LAW PRICE ON THIS IMER PRODUCT
Mfg. item #: 1107509
IMR1107509
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

431
1107585
PISTON COMPRESSOR, 3 PHASE (STEP-UP)
Mfg. item #: 1107585
IMR1107585
lease to own for as little as:$59 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$2,949.00

150
1107090
60.12 ROTOR/STATOR KIT
Mfg. item #: 1107090
IMR1107090
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

150
1107660
L7-1.5 ROTOR/STATOR KIT
Mfg. item #: 1107660
IMR1107660
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

150
1107533
33Õ RUBBER HOSE ¯ 50 MM (2")W/CAM COUPLINGS
Mfg. item #: 1107533
IMR1107533
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$1,139.00

150
1106250
SHOTCRETE GUN
Mfg. item #: 1106250
IMR1106250
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$799.00

150
1106054
STEP-UP 120 A - 208V/60HZ, 10 HP,
Mfg. item #: 1106054
IMR1106054
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

150
1107083
60.12 ROTOR
Mfg. item #: 1107083
IMR1107083
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

150
1107081
60.12 STATOR
Mfg. item #: 1107081
IMR1107081
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

150
1107569
GRATE FOR PREMIXED MATERIALS (ALL STEP-UP)
Mfg. item #: 1107569
IMR1107569
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$779.00

150
1107149
IM25L ROTOR/STATOR KIT
Mfg. item #: 1107149
IMR1107149
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

150
1106433
PRESTIGE 300 - 24 HP YANMAR DIESEL
Mfg. item #: 1106433
IMR1106433
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

150
1107078
2L6 ROTOR
Mfg. item #: 1107078
IMR1107078
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

150
1107077
2L6 STATOR
Mfg. item #: 1107077
IMR1107077
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

150
1107209
AQUA CONTROL ELECTRONIC METER SYSTEM (PRESTIGE)
Mfg. item #: 1107209
IMR1107209
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$2,409.00

150
1107036
VIBRATING GRID (PRESTIGE)
Mfg. item #: 1107036
IMR1107036
lease to own for as little as:$70 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$3,479.00

150
1107086
FOUR-FUNCTION REMOTE CONTROL W/ 164Õ CABLE (PRESTIGE & BOOSTER)
Mfg. item #: 1107086
IMR1107086
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$679.00

150
1107001
FIVE-FUNCTION RADIO REMOTE CONTROL (PRESTIGE & BOOSTER)
Mfg. item #: 1107001
IMR1107001
lease to own for as little as:$86 per month!
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$4,289.00

150
1107208
HYDRAULIC POWER WASHER
Mfg. item #: 1107208
IMR1107208
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

150
1106427
CALL 800-458-3687 FOR EXPERT ADVICE ON THIS IMER:
BOOSTER 20 - 28 HP PISTON PUMP WITH ÒS" VALVE
SOUTHERN TOOL SPECIAL: FREE FREIGHT ON THIS IMER PRODUCT - LIMITED TIME OFFER
Mfg. item #: 1106427
IMR1106427
lease to own for as little as:$1,240 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.11
$61,999.00

150
1107171
HYDRAULIC POWER WASHER
Mfg. item #: 1107171
IMR1107171
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

150
1107196
RUBBER HOPPER EXTENSION KIT (13 CU FT) (BOOSTER)
Mfg. item #: 1107196
IMR1107196
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$539.00

150
1107197
STEEL HOPPER EXTENSION KIT (17 CU FT) (BOOSTER)
Mfg. item #: 1107197
IMR1107197
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$1,549.00

150
1107219
L7 - 1.5 STATOR
Mfg. item #: 1107219
IMR1107219
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

150
1107218
L7 - 1.5 ROTOR
Mfg. item #: 1107218
IMR1107218
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

150
1107542
STANDARD MIXING PADDLE
Mfg. item #: 1107542
IMR1107542
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$179.00

150
1107517
TURBO MIXER KIT (KOINE 3.1 & 35)
Mfg. item #: 1107517
IMR1107517
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

150
1107540
SPRAY GUN COMPLETE WITH DEFLECTOR ¯ 14 MM
Mfg. item #: 1107540
IMR1107540
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$269.00

150
1107011
STUCCO AND FINE COATINGS GUN
Mfg. item #: 1107011
IMR1107011
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$809.00

150
1107009
PAINT AND ELASTOMERIC GUN KIT
Mfg. item #: 1107009
IMR1107009
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$1,339.00

150
1107551
DEFLECTOR ¯ 10 MM (3/8") (DUSE) FOR PREMIXED PLASTER
Mfg. item #: 1107551
IMR1107551
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$99.00

150
1107552
DEFLECTOR ¯ 12 MM (1/2") (DUSE) FOR PREMIXED PLASTER
Mfg. item #: 1107552
IMR1107552
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$99.00

150
1107553
DEFLECTOR ¯ 14 MM (9/16") (DUSE) FOR PREMIXED PLASTER
Mfg. item #: 1107553
IMR1107553
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$109.00

150
1107554
DEFLECTOR ¯ 16 MM (5/8") (DUSE) FOR PREMIXED PLASTER
Mfg. item #: 1107554
IMR1107554
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$109.00

150
1107557
DEFLECTOR ¯ 10 MM (3/8") OF POLYURETHANE TRADITIONAL PLASTER
Mfg. item #: 1107557
IMR1107557
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$179.00

150
1107558
DEFLECTOR ¯ 12 MM (1/2") OF POLYURETHANE TRADITIONAL PLASTER
Mfg. item #: 1107558
IMR1107558
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$179.00

150
1107559
DEFLECTOR ¯ 14 MM (9/16") OF POLYURETHANE TRADITIONAL PLASTER
Mfg. item #: 1107559
IMR1107559
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$179.00

150
1107560
DEFLECTOR ¯ 16 MM (5/8") OF POLYURETHANE TRADITIONAL PLASTER
Mfg. item #: 1107560
IMR1107560
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$179.00

150
1107561
DEFLECTOR ¯ 5 MM (3/16") HARDENED STEEL - PAINTING, SMOOTHING AND SPACING
Mfg. item #: 1107561
IMR1107561
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$159.00

150
1107562
DEFLECTOR ¯ 6 MM (1/4") HARDENED STEEL - PAINTING, SMOOTHING AND SPACING
Mfg. item #: 1107562
IMR1107562
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$159.00

150
1107563
DEFLECTOR ¯ 8 MM (5/16") HARDENED STEEL - PAINTING, SMOOTHING AND SPACING
Mfg. item #: 1107563
IMR1107563
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$159.00

150
1107564
DEFLECTOR ¯ 12 MM (1/2") HARDENED STEEL - PAINTING, SMOOTHING AND SPACING
Mfg. item #: 1107564
IMR1107564
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$159.00

150
1107604
DEFLECTORS ¯ 5 MM (3/16") -6 MM (1/4") -8 MM (5/16")-12 MM (1/2") -16 MM (5/8")
Mfg. item #: 1107604
IMR1107604
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$249.00

150
1107567
KIT WITH 1 DEFLECTOR + 5 HOSE CONNECTORS ¯ 16 MM + 5 HOSE CONNECTORS ¯ 13 MM
Mfg. item #: 1107567
IMR1107567
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$119.00

150
1107566
WITH HOSE CONNECTOR ¯ 16 MM (5/8")
Mfg. item #: 1107566
IMR1107566
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$119.00

150
1107519
SPONGE FOR CLEANING HOSE ¯ 25 MM (1")
Mfg. item #: 1107519
IMR1107519
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$69.00

150
1107520
SPONGE FOR CLEANING HOSE ¯ 35 MM (1-3/8")
Mfg. item #: 1107520
IMR1107520
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$109.00

150
1107521
SPONGE FOR CLEANING HOSE ¯ 50 (2")
Mfg. item #: 1107521
IMR1107521
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$159.00

150
1107522
SPONGE FOR CLEANING HOSE ¯ 35 MM (1-3/8")
Mfg. item #: 1107522
IMR1107522
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$189.00

150
3225846
SMALL 50 HOPPER CAP - WASHING SPONGE ¯ 40 (2-3/8")
Mfg. item #: 3225846
IMR3225846
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$19.00

150
1107183
CLEANING BALLS FOR HOSE ¯ 100 MM (4")
Mfg. item #: 1107183
IMR1107183
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$99.00

150
1107534
66Õ RUBBER HOSE ¯ 50 MM (2") W/CAM COUPLINGS
Mfg. item #: 1107534
IMR1107534
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$1,719.00

150
1107103
CLEANING KIT FOR CLEANING HOSE ¯ 25 MM (1")
Mfg. item #: 1107103
IMR1107103
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$119.00

150
1107087
CLEANING KIT FOR CLEANING HOSE ¯ 35 MM (1-3/8")
Mfg. item #: 1107087
IMR1107087
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$179.00

150
1107104
CLEANING KIT FOR CLEANING HOSE ¯ 50 MM (2")
Mfg. item #: 1107104
IMR1107104
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$199.00

150
1107075
66Õ MATERIAL HOSE - 50 MM (2") MALE TO 35 MM (1-3/8") FEMALE HOSE W/CAM COUPLINGS
Mfg. item #: 1107075
IMR1107075
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$1,049.00

150
1107545
REMOTE CONTROL W/50Õ CABLE
Mfg. item #: 1107545
IMR1107545
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$269.00

150
3224382
GEKA COUPLING W/FEMALE THREAD 1/2"
Mfg. item #: 3224382
IMR3224382
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$19.00

150
3223636
GEKA COUPLING W/FEMALE THREAD 3/4"
Mfg. item #: 3223636
IMR3223636
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$19.00

150
3223428
GEKA COUPLING W/FEMALE THREAD 1"
Mfg. item #: 3223428
IMR3223428
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$19.00

150
3224203
GEKA COUPLING W/MALE THREAD 1/2"
Mfg. item #: 3224203
IMR3224203
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$19.00

150
3223614
GEKA COUPLING W/MALE THREAD 3/4"
Mfg. item #: 3223614
IMR3223614
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$19.00

150
3223722
GEKA COUPLING W/MALE THREAD 1"
Mfg. item #: 3223722
IMR3223722
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$19.00

150
3224706
CAMLOCK COUPLING ¯ 19 MM (THREADED 3/4") FEMALE
Mfg. item #: 3224706
IMR3224706
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$59.00

150
3224709
CAMLOCK COUPLING ¯ 25 MM (THREADED 1") FEMALE
Mfg. item #: 3224709
IMR3224709
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$109.00

150
3223704
CAMLOCK COUPLING ¯ 35 MM (THREADED 1-1/4")FEMALE
Mfg. item #: 3223704
IMR3223704
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$129.00

150
3224492
CAMLOCK COUPLING ¯ 50 MM (THREADED 2") FEMALE
Mfg. item #: 3224492
IMR3224492
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$139.00

150
3224328
CAMLOCK PLUG ¯ 19 MM (3/4" FEMALE THREAD)
Mfg. item #: 3224328
IMR3224328
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$69.00

150
3223721
CAMLOCK PLUG ¯ 25 MM (1"F EMALE THREAD)
Mfg. item #: 3223721
IMR3223721
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$69.00

150
3223703
CAMLOCK PLUG ¯ 35 MM (1-1/4" MALE THREAD)
Mfg. item #: 3223703
IMR3223703
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$89.00

150
3224361
CAMLOCK PLUG ¯ 35 MM (1-1/4" FEMALE THREAD)
Mfg. item #: 3224361
IMR3224361
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$79.00

150
3223818
CAMLOCK PLUG ¯ 50 MM (2" FEMALE THREAD)
Mfg. item #: 3223818
IMR3223818
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$99.00

150
3224701
CAMLOCK COUPLING ¯ 25 MM (1" FEMALE THREAD) PLASTIC
Mfg. item #: 3224701
IMR3224701
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$69.00

150
1107491
IDUST¨ DUST FREE GRATE (KOINE 35 & 4)
Mfg. item #: 1107491
IMR1107491
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$599.00

150
Copyright © 2025 Smith-Hamilton, Inc
0.083 240724 07:21