Technical Sales 1–800–458–3687

JET 10 inch proshop tablesaw

JPS-10TS, 10 inch ProShop Steel or Cast IronWings with Riving Knife

s-h alt
NEW - JPS-10 10 PROSHOP 1.75HP 1PH 115V. 30 FENSE SYSTEM, STEEL WING W/ RIVING KNIFE JPS-10, 10 PROSHOP 1.75HP 1PH 230V, 52 FENCE SYSTEM, CAST WING W/ RIVING KNIFE
Model 725004K Steel Wing Table Saw Shown Model 725003K Cast Iron Table Saw With 52 inch Fence Shown

 

ProShop II, 115V, saws have a 5 Year warranty

  • Newly designed arbor lock to change blades quickly and easily
  • Quick release riving knife for hassle free riving knife changes
  • Improved dust shroud around blade for greater dust collection
  • Convenient, magnetic paddle switch for the safest operation possible
  • Innovative single belt design for easier belt tensioning and reduced vibration.
  • Motor reset switch conveniently relocated to the power switch, instead of the motor
  • Low profile riving knife included
  • Redesigned guard for better protection and ease of use
  • On board storage for all included accessories
  • CSA certified
Models
725004K JPS-10 10 inch ProShop 1.75HP 1PH 115V, 30 inch Fence System, Steel Wing w/ Riving Knife
725005K JPS-10 10 inch ProShop 1.75HP 1PH 115V, 52 inch Fence System, Steel Wing w/ Riving Knife
725000K JPS-10 10 inch ProShop 1.75 HP 1 PH 115V 30" Fence System, Cast Wing w/ Riving Knife
725001K JPS-10, 10 inch ProShop 1.75HP 1PH 115V, 52 inch Fence System, Cast Wing w/ Riving Knife

 

Specifications
Style (Type) Contractor 
Blade Diameter (In.) 10 
Arbor Diameter (In.) 5/8 
Arbor Speed (RPM) 4000 
Maximum Depth of Cut (In.) 3-1/8 
Maximum Depth of Cut at 45 Degrees (In.) 2-1/8 
Maximum Rip Left of Blade (In.) 13-1/2 
Maximum Rip Right of Blade (In.) 30, or 52
Table in Front of Saw Blade at Maximum Depth of Cut (In.) 8.81 
Maximum Diameter of Dado (In.)
Maximum Width of Dado (In.) 13/16 
Table Type Cast Iron 
Table Height from Floor (In.) 34-3/4 
Table Size (L x W) (In.) 20 x 27 
Table Size with Extension (L x W) (In.) 44 x 27 
Miter Gauge Type T-Slot with Stops 
Dust Collection Minimum CFM Required (CFM) 350 
Dust Port Outside Diameter (In.)
Motor Power (HP) 1-3/4 
Motor Phase (PH)
Motor Voltage (V.) 115 
Prewired Voltage (V.) 115 
Motor Amps 14.8 
Recommended Circuit Size (Amps.) 20 
Height 43.0000 
Length 60.0000 
Weight 261.5000 
Width 40.0000 

 

 RED ASSURANCE 5-YEAR WARRANTY WARRANTY AND SERVICE

WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your Jet tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.

 

JET 10 inch TABLESAW ACCESSORIES
725004 ProsShop II Dado Insert
725005 ProShop II Fence assembly
708119 Universal Mobile Base, adjustable up to 36 x 36 inches
708158 Mobile Base Extension Kit (for saws equipped with wood extension table)

 

vega table saw fence

Table Saw Fence

COMPARE PERFORMANCE and PRICE WITH ANY FENCE!
Being able to cut materials safely and precisely on your table saw is essential for fast and accurate Woodworking. Unless saw fences are well designed they make cutting a chore instead of pleasure, resulting in poor quality and inaccu- rate cuts. Most Saw Fence Systems….

  1. Do not lock parallel to saw blade.
  2. Do not have accurate measuring scales.
  3. Have Fence Bars that are too short.
  4. Do not have adequate width ripping capacity.
  5. Require frequent re-alignment.
  6. Lack safety devices.
  7. Are unable to be finely adjusted.

The Vega Saw Fence Systems solve all of these problems (and more!) to assure Accurate and reliable cuts combined with smooth, precise motion.

Product Description

MODEL PRO 26, PRO 40, and PRO 50

The Professional Model features the ruggedness and durability for Commercial production requirement, yet is extremely refined for the serious woodworkers needs and wants. With larger components and greater rigidity, the Professional Model is designed for 10 - 12 inch Saws cutting heavier materials and commercial use. The Vega retrofit Saw Fence System is available with 26, 40 or 50 inch rip capacity to the right of the blade and 10″ to the left, with a standard fence length of 42 inch on models PRO 26, PRO 40, and PRO 50. For saw tables between 34 and 42 inches deep, the PRO 26L, PRO 40L, AND PRO 50L ARE available featuring a 50 inch fence bar.

UTILITY MODEL 26 or 50

Designed for contractors saws, smaller cabinet saws, and 10 inch saws that don’t receive extremely heavy use, the Utility Model Fence is simply a small version of the very successful Professional Model. With all the great features of the Pro Model (fast installation, super precision, micro adjustments and more), the Util- ity Fence will upgrade your saw to a very precise cutting machine at a very rea- sonable price.

The Utility Model Vega Saw Fence System is available with 26 or 50 inch rip capacity to the right of the blade and 8 inch to the left.

FENCE ACCESSORIES

Vega manufactures a number of great accessories for the Professional and Util- ity Model fences making them more convenient, productive and safer to use. All accessories are available for both models except the Leg Set which is not necessary for the Utility 26.

You compare the features!

EASY TO INSTALL

No other Fence can be installed on your saw as easily as The Vega Saw Fence, according to American Woodworker Magazine (Oct.92) “I found the Vega Model 50 the easiest to install of all the fences.”

Vega Saw Fences are designed to use existing bolt holes (no drilling required) of Delta Unisaws and Contractors Saws, Powermatic Model 66, most Sears 10 inch saws and most other saws having fence rail mounting holes 8 -9 inch on either side of the blade. Other saws may require drilling 2 or 4 holes. Little accuracy is needed as the Fence Mounting System allows full adjustment. (Installation may be as little as 15 minutes.) Features which help make this Fence so easy to install include:

  1. Pre-drilled and tapped holes to fit most saws.
  2. Slotted Front Brackets to allow vertical and horizontal adjustments.
  3. Jacking Plates to assist in leveling the Fence Rails
  4. Easy to follow instructions.

ALUMINUM FENCE HEAD

Extruded from 6005 - T6 high strength aluminum, the Vega fence head closely contours the polished chrome front rail providing excellent fit and nearly eliminating side play in the fence during adjustment. In ad- dition, the combination of the polished chrome tube and the aluminum head produces an almost ideal bearing surface for low friction and long life. The fence head simply lifts off the front rail for quick fence removal and installation.

EXCLUSIVE MICRO ADJUSTMENTS!

The Vega Saw Fences are the only Fences with true Micro Adjustment capability. If you require precise adjustment from your tablesaw, this is a necessary feature. The Micro  Adjustment allows you to move the Fence very precisely in either direction, via a threaded rod  thumb nut combination. For the final adjustment of only a few thousandths of an inch, Vega provides a threaded mechanism for final, precise setting.

To operate the Micro Adjust:

  1. Press down on the small knob at the right end of the Fence Head to lock the Micro Adjust Cam.
  2. Release the Main Cam.
  3. Rotate the Thumb Nut under the Fence head to move the Fence very precisely… (one full rotation of the nut is 1/16 inch)
  4. After adjusting is complete, lock the Main Cam.

NO MORE BUMPING…

… and hoping for the best! With other saw fences precise adjustments is achieved using this technique.

MADE OF HIGH QUALITY MATERIALS

Vega has carefully chosen only the highest quality materials to construct their Saw Fences. Three unique precision aluminum extrusions, the highest grade of plating quality tubing and super tough and attractive epoxy coating, combined with meticulous care in fabrication result in a truly superior product.

A. Front Guide Rails
The Front Fence Rail is a precision rolled, plating quality tube with a very thick wall for extreme stiffness. The bar is tapped for attachment of the front mounting brackets, table extension plates, and the Vega leg kit (optional). It is chrome plated and plated and polished to provide an extremely low friction glide path for smooth and easy adjustment of the fence.

B. Rear Guide Rails
The Rear Fence Rail is a 1-1/2 inch square tube predrilled for mounting to the exist- ing holes (in most saws) and tapped to hold the extension table support plates and Vega leg kit (optional). The Rail is epoxy coated for low friction, high durability, and an attractive finish.

C. The Fence Bar
The Vega Fence Bars are aircraft quality aluminum alloy extrusions shaped for extreme stiffness while being relatively lightweight for easy handling. They are very accurate bars with side flatness held to extremely close tolerances, resulting in a very uniform surface to guide material through the saw blade for precision cuts. The Fence Bars have a Black Anodized finish which provides extreme surface hardness and low friction.

D. Mounting Brackets
These extruded aluminum mounts help to make the Vega Saw Fence the easiest and fastest aftermarket saw fence to install. They provide simple and accurate vertical and horizontal adjustment for the front guide rail and simply bolt to the saw table through existing holes (in most saws).

E. Jacking Plates
To further assist in easy and accurate installation, jacking plates (4) are provided at the mounting points of the front and rear rail to make leveling and setting fence clearance easy.

F. Rear Hold Down Bracket
The rear hold down bracket prevents the rear of the fence from raising if the fence issued in conjunction with stock feed systems. It is adjusted to just clear the lower side of the rear guide rail.

Support Plates For Extension Tables
(All Models except Pro 26 and Utility 26) To extend the work surface of your saw, Vega provides four Table Support Plates. These Plates are bolted to the underside of the Front and Rear Fence Rails to support an extension table which can easily construct. In addition, the extension table will strengthen the Saw Fence System.

Vega Fence Models

Model Rip Capacity Right Rip Capacity Left Fence Bar Length Front Rail Dia.
Vega Utility 26 26 8 36 inch 1-3/4 inch
Vega Utility 50 50 8 36 inch 1-3/4 inch
Vega Pro 40 40 10 42 inch 2 inch
Vega Pro 50 50 10 42 inch 2 inch
Vega Pro 40L 40 10 50 inch 2 inch
Vega Pro 50L 50 10 50 inch 2 inch
Models
72024 Utility Saw Fence 26 inch Rip Capacity 36 inch Fence Bar  Still MADE in the USA
72025 Utility Saw Fence 50 inch Rip Capacity 36 inch Fence Bar  Still MADE in the USA
72578 Pro 40 inch Rip Capacity 42 inch Fence Bar  Still MADE in the USA
72580 Pro 50 inch Rip Capacity 42 inch Fence Bar  Still MADE in the USA



 

oliver 0812 Circular blade sharpener

Finally, a sharpener for every home shop that will make your cutting job more efficient and easier at anytime and anywhere. All you need is the 0812 Circular Blade

Sharpener and a hand grinder with our included diamond grinding wheel, and you can save your workshop upkeep and have your blades in prime condition for efficiency and safety assurance.

Easy to use and almost hands free grinding allows you to
configure the sharpener to work with blades from 7.5 to 12 inch in diameter with 5/8 or 1 inch arbor.

Packaging Size

  • NW/GW: 24lbs/26.5lbs
  • 10 x 20 x 18.5 inch
  • 4 inch Angle grinder required for use
    (Not Included)

Features:

  • Sharpens circular saw blades from 7.5 to 12 inch diameter.
  • Portable compact design.
  • Sturdy die casting iron base.
  • 4 inch diamond blade included
  • Suitable for regular blades and carbide tip blades.
  • 2 Year Limited Warranty

Oliver cicular saw blade sharpener
812 Circular Saw Blade Sharpener

 

725004K
JPS-10 10 PROSHOP 1.75HP 1PH 115V. 30 FENSE SYSTEM, STEEL WING W/ RIVING KNIFE, WGT = 302 LBS
Mfg. item #: 725004K
WMH725004K
FREE expedited shipping Plus FREE residential, liftgate and call ahead service. 4
$1,343.29

82
725005K
JPS-10 10 PROSHOP 1.75HP 1PH 115V. 52 FENCE SYSTEM, STEEL WING W/ RIVING KNIFE, WGT = 352 LBS
Mfg. item #: 725005K
WMH725005K
FREE expedited shipping Plus FREE residential, liftgate and call ahead service. 4
$1,527.63

82
725000K
JPS-10 10 PROSHOP 1.75 HP 1 PH 115V 30 FENCE SYSTEM, CAST WING W/ RIVING KNIFE, WGT = 302 LBS
Mfg. item #: 725000K
WMH725000K
FREE expedited shipping Plus FREE residential, liftgate and call ahead service. 4
$1,527.63

82
725001K
JPS-10, 10 PROSHOP 1.75HP 1PH 115V, 52 FENCE SYSTEM, CAST WING W/ RIVING KNIFE, WGT = 352 LBS
Mfg. item #: 725001K
WMH725001K
FREE expedited shipping Plus FREE residential, liftgate and call ahead service. 4
$1,724.99

82
725004
** PROSSHOP II DADO INSERT ** SHIPS FROM OUR STORE IN MIAMI, FL
Mfg. item #: 725004
WMH725004
Expedited shipping at no additional cost when ordered with a Jet, Powermatic or Wilton machine.1019
$50.99

82
725005
** PROSHOP II FENCE ASSEMBLY ** SHIPS FROM OUR STORE IN MIAMI, FL
Mfg. item #: 725005
WMH725005
Expedited shipping at no additional cost when ordered with a Jet, Powermatic or Wilton machine.1019
$199.99

82
708119
Mfg. item #: 708119
WMH708119
Expedited shipping at no additional cost when ordered with a Jet, Powermatic or Wilton machine.1019
$149.99

82
708158
Mfg. item #: 708158
WMH708158
Expedited shipping at no additional cost when ordered with a Jet, Powermatic or Wilton machine.1019
$105.18

82
72024
UTILITY SAW FENCE 26 RIP CAPACITY 36 FENCE BAR ** STILL MADE IN THE USA
Mfg. item #: 72024
VEGA72024
$39.95 Freight on orders from this manufacturer.1021
$299.00

68
72025
UTILITY SAW FENCE 50 RIP CAPACITY 36 FENCE BAR ** STILL MADE IN THE USA
Mfg. item #: 72025
VEGA72025
$39.95 Freight on orders from this manufacturer.1021
$329.00

68
72578
PRO 40 RIP CAPACITY 42 FENCE BAR
Mfg. item #: 72578
VEGA72578
$39.95 Freight on orders from this manufacturer.1021
$369.00

68
72580
PRO 50 RIP CAPACITY 42 FENCE BAR
Mfg. item #: 72580
VEGA72580
$39.95 Freight on orders from this manufacturer.1021
$349.00

68
812
SAW BLADE SHARPENER ** SHIPPING WEIGHT = 20 LBS
Mfg. item #: 812
OLV812
FREE shipping when ordered with a machine from this manufacturer.20
$249.99

852
Copyright © 2021 Smith-Hamilton, Inc
0.013 210326 15:06