Technical Sales 1–800–458–3687

JET 10 inch DELUXE XACTA Table Saw

s-h alt
Picture shown above is with the 50" Fence

If youve ever wondered about what a table saw can really do, look no further. Introducing the new JET 10in DELUXE XACTA SAW. The Quick release riving knife and integrated arbor lock keeps the operator safe and more efficient. The DELUXE XACTA SAW offers an upgraded Poly-V belt drive system for smooth operation and optimal power transfer, a fully shrouded blade for highly efficient dust collection. The 26 x 30 inch wings and deeper table gives you even more cast iron to work on. A built-in 12.5 x 18 x 4 inch storage drawer sealed from the cabinet keeps your necessities within arms reach, also includes an on-board fence and miter gauge storage.

  • EXCLUSIVE 50" Commercial XACTA® Fence II with T-square design
  • Quick release riving knife greatly reduces binding/kickback risk
  • Push button arbor lock (patent pending) for rapid blade change
  • Shrouded Blade increases dust collection efficiency
  • Standard 11" left and right cast iron extension wings provides the largest table surface in its class
  • Poly-V drive belt system delivers efficient, quiet operation
  • Rail-mounted magnetic switch is easy to reach and provides overload protection
  • Enclosed cabinet with built-in sealed storage drawer
  • Hinged motor cover on cabinet gives quick access to the motor and belts
  • Deluxe miter gauge with adjustable positive stops and large soft grip handles provides large crosscutting capacity and accurate miters
  • Heavy-duty chrome plated handwheels contribute to smooth trunnion/arbor movement
  • Built-in 4" port for dust collection
  • Precision ground high luster cast iron table tops with front edge bevel for hassle-free workpiece positioning
  • Left tilt, Wide stance heavy-duty trunnion for stability and smooth blade positioning
  • Independent leaf safety guard protects operator from blade while cutting, even at 45° tilt
  • Arbor wrench
  • Powder coated paint for a long-lasting, chip-resistant finish
JET 708674PK - 30" Cabinet Table Saw with 30 inch Fence
Type Cabinet
Blade Diameter (In.) 10
Arbor Diameter (In.) 5/8
Arbor Speed (RPM) 4300
Maximum Depth of Cut (In.) 3
Maximum Depth of Cut at 45 Degrees (In.) 2-1/8
Maximum Rip Left of Blade (In.) 13
Maximum Rip Right of Blade (In.) 30
Table in Front of Saw Blade at Maximum Depth of Cut (In.) 10
Maximum Diameter of Dado (In.) 8
Maximum Width of Dado (In.) 13/16
Table Type Cast Iron
Table Size (L x W) (In.) 29 x 20
Table Size with Extension (L x W) (In.) 29 x 42
Miter Gauge Type Deluxe
Dust Collection Minimum CFM Required (CFM) 350
Dust Port Outside Diameter (In.) 4
Motor Power (HP) 3
Motor Phase (PH) 1
Motor Voltage (V.) 230
Prewired Voltage (V.) 230
Motor Amps 14.5

 

Part Number 708675PK  
Blade Diameter 10 "
Arbor Diameter 5/8 "
Arbor Speed 4300 RPM
Maximum Depth of Cut 3 "
Maximum Depth of Cut at 45 Degrees 2 1/8 "
Maximum Cross Cut 21 "
Maximum Rip Right of Blade 50 "
Maximum Rip Left of Blade 13 "
Table in Front of Saw Blade at Maximum Depth of Cut 10 "
Maximum Width of Dado 13/16 "
Maximum Diameter of Dado 8 "
Table Type Cast Iron  
Table Height 34 "
Table Size with Standard Extension (L x W) 29 x 42 "  
Table Size without Extension (L x W) 29 x 20 "  
Rapid Wing Extension n.a.  
Table Size without Wings (L x W) 29 x 20 "  
Dust Port Outside Diameter 4 "
Dust Collection Minimum CFM Required 350 cu.ft/min
Dust Collection Adapter Port n.a.  
Leg Stand with Steel Storage n.a.  
Miter Gauge Type Deluxe  
Motor Power 3 HP
Motor Voltage 230 V  
Prewired Voltage 230 V
Motor Phase 1 Ph
Family Description 10" DELUXE XACTA® TABLE SAWS  
Model Number JTAS-10XL50-1DX  
Brand Jet  
Overall Dimensions 38 x 36 x 85  
Height 38 inch
Width 36 inch
Length 85 inch
Net Weight 510 pound

 

5 Year Warranty WARRANTY AND SERVICE

WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your Jet® tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.

 

JET 10" DELUXE XACTA TABLESAWS and Accessories
708674PK XACTA Saw Deluxe 3HP 1Ph 230V, 30" Fence System
708675PK XACTA Saw Deluxe 3HP 1Ph 230V, 50" Fence System
708676PK XACTA Saw Deluxe 5HP 1Ph 230V, 30" Fence System
708677PK XACTA Saw Deluxe 5HP 1Ph 230V, 50" Fence System
Accessories
708097 Dado Insert for 10" Deluxe XACTASAW
708118 JMB-UMB, Universal Mobile Base
708119 JMB-UMB-HD Universal Mobile Base
708158 Mobile Base Extension Kit for 708119
708401 JET Downdraft Table For Deluxe XactaSaw with Legs
708682 Riving Knife, Thin Kerf, for Deluxe XACTA Saw
708683 Riving Knife, Low Profile, for Deluxe XACTA Saw
708684 Riving Knife, Low Profile Thin Kerf, for Deluxe XACTA Saw

 

vega table saw fence

Table Saw Fence

COMPARE PERFORMANCE & PRICE WITH ANY FENCE!
Being able to cut materials safely and precisely on your table saw is essential for fast and accurate Woodworking. Unless saw fences are well designed they make cutting a chore instead of pleasure, resulting in poor quality and inaccu- rate cuts. Most Saw Fence Systems….

  1. Do not lock parallel to saw blade.
  2. Do not have accurate measuring scales.
  3. Have Fence Bars that are too short.
  4. Do not have adequate width ripping capacity.
  5. Require frequent re-alignment.
  6. Lack safety devices.
  7. Are unable to be finely adjusted.

The Vega Saw Fence Systems solve all of these problems (and more!) to assure Accurate and reliable cuts combined with smooth, precise motion.

Product Description

MODEL PRO 26, PRO 40, and PRO 50

The Professional Model features the ruggedness and durability for Commercial production requirement, yet is extremely refined for the serious woodworker’s needs and wants. With larger components and greater rigidity, the Professional Model is designed for 10 – 12″ Saws cutting heavier materials and commercial use. The Vega retrofit Saw Fence System is available with 26″, 40″ or 50″ rip capacity to the right of the blade and 10″ to the left, with a standard fence length of 42″ on models PRO 26, PRO 40, and PRO 50. For saw tables between 34 and 42 inches deep, the PRO 26L, PRO 40L, AND PRO 50L ARE available featuring a 50″ fence bar.

UTILITY MODEL 26 or 50

Designed for contractors saws, smaller cabinet saws, and 10″ saws that don’t re- ceive extremely heavy use, the Utility Model Fence is simply a small version of the very successful Professional Model. With all the great features of the Pro Model (fast installation, super precision, micro adjustments and more), the Util- ity Fence will upgrade your saw to a very precise cutting machine at a very rea- sonable price.

The Utility Model Vega Saw Fence System is available with 26″ or 50″ rip capacity to the right of the blade and 8″ to the left.

FENCE ACCESSORIES

Vega manufactures a number of great accessories for the Professional and Util- ity Model fences making them more convenient, productive and safer to use. All accessories are available for both models except the Leg Set which is not necessary for the Utility 26.

You compare the features!

EASY TO INSTALL

No other Fence can be installed on your saw as easily as The Vega Saw Fence, according to American Woodworker Magazine (Oct.92) “I found the Vega Model 50 the easiest to install of all the fences.”

Vega Saw Fences are designed to use existing bolt holes (no drilling required) of Delta Unisaws & Contractors Saws, Powermatic Model 66, most Sears 10″ saws and most other saws having fence rail mounting holes 8 -9″ on either side of the blade. Other saws may require drilling 2 or 4 holes. Little accuracy is needed as the Fence Mounting System allows full adjustment. (Installation may be as little as 15 minutes.) Features which help make this Fence so easy to install include:

  1. Pre-drilled and tapped holes to fit most saws.
  2. Slotted Front Brackets to allow vertical and horizontal adjustments.
  3. Jacking Plates to assist in leveling the Fence Rails
  4. Easy to follow instructions.

ALUMINUM FENCE HEAD

Extruded from 6005 – T6 high strength aluminum, the Vega fence head closely contours the polished chrome front rail providing excellent fit and nearly eliminating side play in the fence during adjustment. In ad- dition, the combination of the polished chrome tube and the aluminum head produces an almost ideal bearing surface for low friction and long life. The fence head simply lifts off the front rail for quick fence removal and installation.

EXCLUSIVE MICRO – ADJUSTMENTS!

The Vega Saw Fences are the only Fences with true Micro – Adjustment capability. If you require precise adjustment from your tablesaw, this is a necessary feature. The Micro – Adjustment allows you to move the Fence very precisely in either direction, via a threaded rod – thumb nut combination. For the final adjustment of only a few thousandths of an inch, Vega provides a threaded mechanism for final, precise setting.

To operate the Micro Adjust:

  1. Press down on the small knob at the right end of the Fence Head to lock the Micro Adjust Cam.
  2. Release the Main Cam.
  3. Rotate the Thumb Nut under the Fence head to move the Fence very precisely… (one full rotation of the nut is 1/16″)
  4. After adjusting is complete, lock the Main Cam.

NO MORE BUMPING…

… and hoping for the best! With other saw fences precise adjustments is achieved using this “technique.”

MADE OF HIGH QUALITY MATERIALS

Vega has carefully chosen only the highest quality materials to construct their Saw Fences. Three unique precision aluminum extrusions, the highest grade of plating quality tubing and super tough and attractive epoxy coating, combined with meticulous care in fabrication result in a truly superior product.

A. Front Guide Rails
The Front Fence Rail is a precision rolled, plating quality tube with a very thick wall for extreme stiffness. The bar is tapped for attachment of the front mounting brackets, table extension plates, and the Vega leg kit (optional). It is chrome plated and plated and polished to provide an extremely low friction glide path for smooth and easy adjustment of the fence.

B. Rear Guide Rails
The Rear Fence Rail is a 1 ½” square tube predrilled for mounting to the exist- ing holes (in most saws) and tapped to hold the extension table support plates and Vega leg kit (optional). The Rail is epoxy coated for low friction, high durability, and an attractive finish.

C. The Fence Bar
The Vega Fence Bars are aircraft quality aluminum alloy extrusions shaped for extreme stiffness while being relatively lightweight for easy handling. They are very accurate bars with side flatness held to extremely close tolerances, resulting in a very uniform surface to guide material through the saw blade for precision cuts. The Fence Bars have a Black Anodized finish which provides extreme surface hardness and low friction.

D. Mounting Brackets
These extruded aluminum mounts help to make the Vega Saw Fence the easiest and fastest aftermarket saw fence to install. They provide simple and accurate vertical and horizontal adjustment for the front guide rail and simply bolt to the saw table through existing holes (in most saws).

E. Jacking Plates
To further assist in easy and accurate installation, jacking plates (4) are provided at the mounting points of the front and rear rail to make leveling and setting fence clearance easy.

F. Rear Hold Down Bracket
The rear hold down bracket prevents the rear of the fence from raising if the fence issued in conjunction with stock feed systems. It is adjusted to just clear the lower side of the rear guide rail.

Support Plates For Extension Tables
(All Models except Pro 26 and Utility 26) To extend the work surface of your saw, Vega provides four Table Support Plates. These Plates are bolted to the underside of the Front and Rear Fence Rails to support an extension table which can easily construct. In addition, the extension table will strengthen the Saw Fence System.

Vega Fence Models

Model Rip Capacity Right Rip Capacity Left Fence Bar Length Front Rail Dia.
Vega Utility 26 26 8 36 inch 1-3/4 inch
Vega Utility 50 50 8 36 inch 1-3/4 inch
Vega Pro 40 40 10 42 inch 2 inch
Vega Pro 50 50 10 42 inch 2 inch
Vega Pro 40L 40 10 50 inch 2 inch
Vega Pro 50L 50 10 50 inch 2 inch
Models
72024 Utility Saw Fence 26 inch Rip Capacity 36 inch Fence Bar  Still MADE in the USA
72025 Utility Saw Fence 50 inch Rip Capacity 36 inch Fence Bar  Still MADE in the USA
72578 Pro 40 inch Rip Capacity 42 inch Fence Bar  Still MADE in the USA
72580 Pro 50 inch Rip Capacity 42 inch Fence Bar  Still MADE in the USA
72579 Pro 40L inch Rip Capacity 50 inch Fence Bar  Still MADE in the USA
72581 Pro 50L inch Rip Capacity 50 inch Fence Bar  Still MADE in the USA

 

oliver 0812 Circular blade sharpener

Finally, a sharpener for every home shop that will make your cutting job more efficient and easier at anytime and anywhere. All you need is the 0812 Circular Blade

Sharpener and a hand grinder with our included diamond grinding wheel, and you can save your workshop upkeep and have your blades in prime condition for efficiency and safety assurance.

Easy to use and almost hands free grinding allows you to
configure the sharpener to work with blades from 7.5 to 12 inch in diameter with 5/8 or 1 inch arbor.

Packaging Size

  • NW/GW: 24lbs/26.5lbs
  • 10 x 20 x 18.5 inch
  • 4 inch Angle grinder required for use
    (Not Included)

Features:

  • Sharpens circular saw blades from 7.5 to 12 inch diameter.
  • Portable compact design.
  • Sturdy die casting iron base.
  • 4 inch diamond blade included
  • Suitable for regular blades and carbide tip blades.
  • 2 Year Limited Warranty

Oliver cicular saw blade sharpener
812 Circular Saw Blade Sharpener

 

708674PK
XACTA SAW DELUXE 3HP 1PH 230V, 30 FENCE SYSTEM - SHIPS LTL TRUCK FREIGHT
Mfg. item #: 708674PK
WMH708674PK
lease to own for as little as:$52 per month!
FREE expedited shipping Plus FREE residential, liftgate and call ahead service. 4
$2,599.99

8
708675PK
XACTA SAW DELUXE 3HP 1PH 230V, 50 FENCE SYSTEM - SHIPS LTL TRUCK FREIGHT
Mfg. item #: 708675PK
WMH708675PK
lease to own for as little as:$54 per month!
FREE expedited shipping Plus FREE residential, liftgate and call ahead service. 4
$2,699.99

8
708676PK
XACTA SAW DELUXE 5HP 1PH 230V, 30 FENCE SYSTEM - SHIPS LTL TRUCK FREIGHT
Mfg. item #: 708676PK
WMH708676PK
lease to own for as little as:$58 per month!
FREE expedited shipping Plus FREE residential, liftgate and call ahead service. 4
$2,899.99

8
708677PK
XACTA SAW DELUXE 5HP 1PH 230V, 50 FENCE SYSTEM - SHIPS LTL TRUCK FREIGHT
Mfg. item #: 708677PK
WMH708677PK
lease to own for as little as:$60 per month!
FREE expedited shipping Plus FREE residential, liftgate and call ahead service. 4
$2,999.99

8
708097
Mfg. item #: 708097
WMH708097
Expedited shipping at no additional cost when ordered with a Jet, Powermatic or Wilton machine.1019
$59.99

8   1
708118
Mfg. item #: 708118
WMH708118
Expedited shipping at no additional cost when ordered with a Jet, Powermatic or Wilton machine.1019
$121.99

8   1
708119
Mfg. item #: 708119
WMH708119
Expedited shipping at no additional cost when ordered with a Jet, Powermatic or Wilton machine.1019
$158.99

8   1
708158
Mfg. item #: 708158
WMH708158
Expedited shipping at no additional cost when ordered with a Jet, Powermatic or Wilton machine.1019
$106.99

8
708401
Mfg. item #: 708401
WMH708401
Expedited shipping at no additional cost when ordered with a Jet, Powermatic or Wilton machine.8
$585.33

23
708682
Mfg. item #: 708682
WMH708682
Expedited shipping at no additional cost when ordered with a Jet, Powermatic or Wilton machine.1019
$49.99

8
708683
Mfg. item #: 708683
WMH708683
Expedited shipping at no additional cost when ordered with a Jet, Powermatic or Wilton machine.1019
$49.99

8   1
708684
Mfg. item #: 708684
WMH708684
Expedited shipping at no additional cost when ordered with a Jet, Powermatic or Wilton machine.1019
$39.99

8
72024
UTILITY SAW FENCE 26 RIP CAPACITY 36 FENCE BAR ** STILL MADE IN THE USA
Mfg. item #: 72024
VEGA72024
Ships FREE via UPS to lower 48 states.5
$299.00

170
72025
UTILITY SAW FENCE 50 RIP CAPACITY 36 FENCE BAR ** STILL MADE IN THE USA
Mfg. item #: 72025
VEGA72025
Ships FREE via UPS to lower 48 states.5
$329.00

170
72578
PRO 40 RIP CAPACITY 42 FENCE BAR ** STILL MADE IN THE USA
Mfg. item #: 72578
VEGA72578
Ships FREE via UPS to lower 48 states.5
$369.00

170
72580
PRO 50 RIP CAPACITY 42 FENCE BAR ** STILL MADE IN THE USA
Mfg. item #: 72580
VEGA72580
Ships FREE via UPS to lower 48 states.5
$349.00

170
72579
PRO 40L RIP CAPACITY 50 FENCE BAR ** STILL MADE IN THE USA
Mfg. item #: 72579
VEGA72579
Ships FREE via UPS to lower 48 states.5
$409.00

126
72581
PRO 50L RIP CAPACITY 50 FENCE BAR ** STILL MADE IN THE USA
Mfg. item #: 72581
VEGA72581
Ships FREE via UPS to lower 48 states.5
$419.00

170
812
SAW BLADE SHARPENER ** SHIPPING WEIGHT = 20 LBS
Mfg. item #: 812
OLV812
FREE shipping when ordered with a machine from this manufacturer.20
$249.99

504
Copyright © 2020 Smith-Hamilton, Inc
0.018 200521 15:30