JET Ferrous and Non Ferrous Cold Saws

models
CS-275
cs-315
J-FK350-2K
J-FK350-4K
J-CK350-2
-CK350-4
WARRANTY

FERROUS MANUAL COLD SAWS
414226	CS-275, 275mm, Manual Cold Saw (220V / 3 PHASE)
414228	CS-275, 275mm, Manual Cold Saw (220V / 1 PHASE)
414227	CS-315, 315mm, Manual Cold Saw (220V / 3 PHASE)
414229	CS-315, 315mm, Manual Cold Saw (220V / 1 PHASE)
414214K	J-FK350-2K, 350mm, Manual Cold Saw, F, 230V
414217K	J-FK350-4K, 350mm, Manual Cold Saw, F, 460V
NON-FERROUS MANUAL COLD SAWS
414203K	J-CK350-2K, 350mm, Manual Cold Saw, NF, 220V
414207K	J-CK350-4K, 350mm, Manual Cold Saw, NF, 460V

FERROUS HIGH-SPEED STEEL COLD SAW BLADES
579036	Ferrous Circular Saw Blade 350mm x 32mm x 2.5mm x 360T For J-FK350-2/4K
579038	Ferrous Circular Saw Blade 350mm x 32mm x 2.5mm x 220T For J-FK350-2/4K
579043	Ferrous Circular Saw Blade 350mm x 32mm x 2.5mm x 100T for J-FK350-2/4K
579047	Ferrous Circular Saw Blade 350mm x 32mm x 2.5mm x 54T for J-FK350-2/4K
NON-FERROUS HIGH-SPEED STEEL COLD SAW BLADES
579062	Non-Ferrous Carbide Circular Saw Blade 350mm x 32mm x 3.4mm x 84T For J-CK350-2/4K
579064	Non-Ferrous Carbide Circular Saw Blade 350mm x 32mm x 3.4mm x 108T For J-CK350-2/4K
579052	Non-Ferrous Circular Saw Blade 350mm x 32mm x 2.5mm x 180T For J-CK350-2/4K

CS-275, 275mm Ferrous Manual Cold Saw has a 2 Year warranty

Now available in Single Phase 115V
Two-piece cast iron blade guard system permits quick and easy blade changes without removing the guards
Quick clamping cam-action vise with adjustable gib and material support bar for burr-free cutting operations
Hardened and ground direct drive worm shaft and bronze worm wheel transmits maximum torque to the saw blade
Blade drive reduction gearbox operates in an oil bath for increaded durability
Heavy-Duty cast iron frame base with easy access storage provides a stable cuting platform
1-1/3 Gallon coolant reservoir and pump with flow control system extends blade life
Quick tension and release mitering capabilities with stops at 45Â° right, 45Â° left
Fully adjustable material depth stop for sawing repeatability and increased production

Detailed Specifications
CS-275, 275mm, Manual Cold Saw (220V / 3 PHASE)	414226
CS-275, 275mm, Manual Cold Saw (220V / 1 PHASE)	414228
Style (Type)	Ferrous
Blade Speeds (RPM)	54, 108
Tubing Round at 90 Degrees (In.)	3-1/8
Tubing Round at 45 Degrees (In.)	3-1/8
Tubing Square at 90 Degrees (In.)	2-1/2 x 2-1/2
Tubing Square at 45 Degrees (In.)	2-1/8 x 2-1/8
Tubing Rectangle at 90 Degrees (In.)	3-1/8 x 2
Tubing Rectangle at 45 Degrees (In.)	2-1/8 x 2
Solid Round at 90 Degrees (In.)	3-1/8
Solid Round at 45 Degrees (In.)	3-1/8
Solid Square at 90 Degrees (In.)	2-1/2 x 2-1/2
Solid Square at 45 Degrees (In.)	2-1/8 x 2-1/8
Solid Rectangle at 90 Degrees (In.)	3-1/8 x 2
Solid Rectangle at 45 Degrees (In.)	2-1/8 x 2
Blade Size (Mm.)	275 x 32 x 2
Maximum Vise Opening (In.)	4
Motor (HP)	1-1/2 HP, 230V, 3Ph
Overall Dimensions (L x W xH) (In.)	40 x 39 x 72
Weight (Lbs.)	360
Height	61.0000
Length	27.0000
Weight	400.0000
Width	25.0000

CS-315, 315mm Ferrous Manual Cold Saw has a 2 Year warranty

Now available in Single Phase 230V
Two-piece cast iron blade guard system permits quick and easy blade changes without removing the guards
Quick clamping cam-action vise with adjustable gib and material support bar for burr-free cutting operations
Hardened and ground direct drive worm shaft and bronze worm wheel transmits maximum torque to the saw blade
Blade drive reduction gearbox operates in an oil bath for increaded durability
Heavy-Duty cast iron frame base with easy access storage provides a stable cuting platform
1-1/3 Gallon coolant reservoir and pump with flow control system extends blade life
Quick tension and release mitering capabilities with stops at 45Â° right, 45Â° left
Fully adjustable material depth stop for sawing repeatability and increased production

Detailed Specifications
CS-315, 315mm, Manual Cold Saw (220V / 3 PHASE)	414227
CS-315, 315mm, Manual Cold Saw (220V / 1 PHASE)	414229
Style (Type)	Ferrous
Blade Speeds (RPM)	52, 104
Tubing Round at 90 Degrees (In.)	3-1/2
Tubing Round at 45 Degrees (In.)	3-1/2
Tubing Square at 90 Degrees (In.)	3-1/8 x 3-1/8
Tubing Square at 45 Degrees (In.)	2-1/2 x 2-1/2
Tubing Rectangle at 90 Degrees (In.)	4 x 3-1/8
Tubing Rectangle at 45 Degrees (In.)	3-1/16 x 2-1/4
Solid Round at 90 Degrees (In.)	3-1/2
Solid Round at 45 Degrees (In.)	3-1/2
Solid Square at 90 Degrees (In.)	3-1/8 x 3-1/8
Solid Square at 45 Degrees (In.)	2-1/2 x 2-1/2
Solid Rectangle at 90 Degrees (In.)	4 x 3-1/8
Solid Rectangle at 45 Degrees (In.)	3-1/16 x 2-1/4
Blade Size (Mm.)	315 x 32 x 2
Maximum Vise Opening (In.)	4-3/4
Motor (HP)	2 HP, 230V, 3Ph
Overall Dimensions (L x W xH) (In.)	40 x 39 x 72
Weight (Lbs.)	420
Height	72.0000
Length	40.0000
Weight	450.0000
Width	40.0000

J-FK350-2K, 350mm Ferrous Manual Cold Saw has a 2 Year warranty

350mm (14 inch) Ferrous Cold Saw for steel, stainless and tough to cut alloys.
Spring loaded whole hand trigger starts or stops the sawing process for easy smooth cutting and increased user safety
Quick tension and release mitering capabilities with stops at 45 degree right, 45 degree left, and 90 degree (center), capable of slotting
Two-piece cast iron blade guard system permits quick and easy blade changes without removing the guards
Hardened and ground worm screw and wheel drive gear box operates in an oil bath for added durability
Double self centering vise with adjustable gibs secures the material for burr free cuts
Heavy-Duty cast iron frame base with easy access storage provides a stable cuting platform
Thermal overload protection with magnetic starter for increased electrical safety
Flood style coolant with flow control system extends blade life
30 inch adjustable length material stop

Detailed Specifications
Part Number	414214K
Style (Type)	Ferrous
Blade Speeds (RPM)	44, 88
Tubing Round at 90 Degrees (In.)	4-1/2
Tubing Round at 45 Degrees (In.)	3-1/2
Tubing Square at 90 Degrees (In.)	4-1/4 x 4-1/4
Tubing Square at 45 Degrees (In.)	3-1/2 x 3-1/2
Tubing Rectangle at 90 Degrees (In.)	5-1/2 x 3-3/4
Tubing Rectangle at 45 Degrees (In.)	3-1/2 x 3-1/2
Solid Round at 90 Degrees (In.)	2
Solid Round at 45 Degrees (In.)	1-3/4
Solid Square at 90 Degrees (In.)	2 x 2
Solid Square at 45 Degrees (In.)	1-3/4 x 1-3/4
Solid Rectangle at 90 Degrees (In.)	2 x 2
Solid Rectangle at 45 Degrees (In.)	1-3/4 x 1-3/4
Blade Size (Mm.)	350 x 32 x 2-1/2
Maximum Vise Opening (In.)	6
Motor (HP)	2 HP, 220V, 3 Ph
Overall Dimensions (L x W xH) (In.)	50 x 28 x 60
Weight (Lbs.)	794
Height	0.0000
Length	0.0000
Weight	760.0000
Width	0.0000

J-FK350-4K, 350mm Ferrous Manual Cold Saw has a 2 Year warranty

350mm (14 inch) Ferrous Cold Saw for steel, stainless and tough to cut alloys.
Spring loaded whole hand trigger starts or stops the sawing process for easy smooth cutting and increased user safety
Quick tension and release mitering capabilities with stops at 45 degree right, 45 degree left, and 90 degree (center), capable of slotting
Two-piece cast iron blade guard system permits quick and easy blade changes without removing the guards
Hardened and ground worm screw and wheel drive gear box operates in an oil bath for added durability
Double self centering vise with adjustable gibs secures the material for burr free cuts
Heavy-Duty cast iron frame base with easy access storage provides a stable cuting platform
Thermal overload protection with magnetic starter for increased electrical safety
Flood style coolant with flow control system extends blade life
30 inch adjustable length material stop

Detailed Specifications
Part Number	414217K
Style (Type)	Ferrous
Blade Speeds (RPM)	44, 88
Tubing Round at 90 Degrees (In.)	4-1/2
Tubing Round at 45 Degrees (In.)	3-1/2
Tubing Square at 90 Degrees (In.)	4-1/4 x 4-1/4
Tubing Square at 45 Degrees (In.)	3-1/2 x 3-1/2
Tubing Rectangle at 90 Degrees (In.)	5-1/2 x 3-3/4
Tubing Rectangle at 45 Degrees (In.)	3-1/2 x 3-1/2
Solid Round at 90 Degrees (In.)	2
Solid Round at 45 Degrees (In.)	1-3/4
Solid Square at 90 Degrees (In.)	2 x 2
Solid Square at 45 Degrees (In.)	1-3/4 x 1-3/4
Solid Rectangle at 90 Degrees (In.)	2 x 2
Solid Rectangle at 45 Degrees (In.)	1-3/4 x 1-3/4
Blade Size (Mm.)	350 x 32 x 2-1/2
Maximum Vise Opening (In.)	6
Motor (HP)	2 HP, 440V, 3Ph
Overall Dimensions (L x W xH) (In.)	50 x 28 x 60
Weight (Lbs.)	794
Height	0.0000
Length	0.0000
Weight	760.0000
Width	0.0000

The Jet J-CK350-2 350MM MANUAL COLD SAW NON-FERROUS 220V
has a 2 Year warranty

350mm Non-Ferrous cold saw for aluminum, brass and other easy to cut alloys
Mitering capabilities - stops at 90, 45-left and 45-right degrees
Double self-centering vise for burr-free cuts
Two cutting speeds
Thermal overload protection with magnetic starter
Chip-chute for optional chip-collector hook-up
Coolant tank with mist lubrication system
Solid one-piece weldment base stand
Adjustable work stop
Tool kit

Detailed Specifications
Part Number	414203K
Blade Size (in.)	350mm x 32 x 3.4
Blade Speeds (RPM)	1750, 3500
Brand	Jet
Maximum Vise Opening (in.)	6
Model Number	J-CK350-2K
Motor	2HP, 230V, 3Ph
Net Weight	683 pound
Rectangle at 45 Degrees (in.)	3-1/2 x 3-1/2
Rectangle at 90 Degrees (in.)	5-1/2 x 3-3/4
Round at 45 Degrees (in.)	3-1/2
Round at 90 Degrees (in.)	4-1/2
Square at 45 Degrees (in.)	3-1/2 x 3-1/2
Square at 90 Degrees (in.)	4-1/4 x 4-1/4
Web Description	J-CK350-2K 350mm MANUAL COLD SAW NON-FERROUS 230V

The Jet J-CK350-4 350MM MANUAL COLD SAW NON-FERROUS 460V
has a 2 Year warranty

350mm Non-Ferrous cold saw for aluminum, brass and other easy to machine alloys
Mitering capabilities-stops at 90, 45-left and 45-right degrees
Double self-centering vise for burr-free cuts
Two cutting speeds
Thermal overload protection with magnetic starter
Chip-chute for optional chip-collector hook-up
Coolant tank with mist lubrication system
Solid one piece weldment base stand
Adjustable work stop
Tool kit

Detailed Specifications
Part Number	414207K
Blade Size (in.)	350 mm x 32 x 3.4
Blade Speeds (RPM)	1750 , 3500
Brand	Jet
Maximum Vise Opening (in.)	6
Model Number	J-CK350-4K
Motor	3HP, 460V, 3Ph
Net Weight	683 pound
Rectangle at 45 Degrees (in.)	3-1/2 x 3-1/2
Rectangle at 90 Degrees (in.)	5-1/2 x 3-3/4
Round at 45 Degrees (in.)	3-1/2
Round at 90 Degrees (in.)	4-1/2
Square at 45 Degrees (in.)	2-1/2 x 2-1/2
Square at 90 Degrees (in.)	3 x 3
Web Description	J-CK350-4K 350mm MANUAL COLD SAW NON-FERROUS 460V

WARRANTY AND SERVICE

WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JetÂ® tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.


CS-275 and CS-315, 315mm Ferrous Manual Cold Saw	Jet J-FK350-2 350MM MANUAL COLD SAW FERROUS	Jet J-CK350-2 350MM MANUAL COLD SAW NON-FERROUS