Technical Sales 1–800–458–3687

JET Horizontal / Vertical Bandsaw

The HVBS-7MW, J-3410, and J-3410-2 Metalworking Bandsaws are no longer avaliable.
Please review the below products as replacement

414559 jet hvbs-712 horizontal / vertical bandsaw jet 2 year warranty logo HVBS712V, 7" x 12" Variable Speed Horizontal / Vertical Bandsaw
HVBS-712, 7 x 12 inch
Horizontal / Vertical Bandsaw

 

HVBS712V, 7 inch x 12 inch
Variable Speed Horizontal / Vertical Bandsaw

 

 

HVBS-712, 7 x 12 inch Horizontal / Vertical Bandsaw
has a 2 Year warranty

  • 9-7/16 x 10 inch work table in the vertical position
  • Rapid action vise miters to 45 degree
  • Improved Height and width of stand with built-in storage cabinet and chip tray
  • Adjustable material stop for repeatability
  • CSA/CUS Certification
  • Blade drive is a belt to sealed, hardened and ground gear drive system
  • Blade wheels are made from flanged cast iron for increased durability
  • Auto shut-off after cut
  • Adjustable ball bearing blade guides
  • Cast mounted adjustable hydraulic downfeed
  • Complete coolant system
  • Four 8 inch rubber wheels for ease of movement
  • 3/4 inch Bi-Metal blade
Detailed Specifications
Part Number 414559
Model Number HVBS-712
Cutting Capacity (W x D) (In.) 7 x 12 
Round at 90 Degrees (In.)
Round at 45 Degrees (In.) 4-1/2 
Rectangle at 90 Degrees (In.) 4 x 11 / 7 x 10-3/8 
Rectangle at 45 Degrees (In.) 6-1/2 x 4-1/2 
Square at 90 Degrees (In.) 7 x 7 
Square at 45 Degrees (In.) 4-1/2 x 4-1/2 
Throat Depth (In.)
Head Movement (Deg.)
Vise Swivels (Deg.) 45 
Blade Speeds (SFPM) 86, 132, 178, 260 
Blade Wheel Diameter (In.) 11-3/4 
Blade Length (In.) 93 
Blade Size (In.) 3/4 x 0.032 x 93 
Bed Height (In.) 22-1/4 
Coolant Capacity (Gal.)
Motor (HP) 3/4 HP, 115/230V, 1Ph 
Weight (Lbs.) 418 
Overall Dimensions (L x W x H) (In.) 48 x 17 x 40 

 

HVBS-712D, 7 x 12 inch Deluxe Horizontal / Vertical Bandsaw
has a 2 Year warranty

  • Large 10 x 12 inch infeed table assembly extends the support area and can be used in either horizontal or vertical positions
  • Multi-position blade guides enhance use in vertical position by increasing the throat capacity from 4 to 8 inch and creates a safer working position
  • Tool-less quick lock vise with preset mitering positions at 15, 30 and 45 degree
  • Improved Height and width of stand with built-in storage cabinet and chip tray
  • Micro adjustable tool-less material stop for accurate set-up and repeatability
  • CSA/CUS Certification
  • Blade drive is a belt to sealed, hardened and ground gear drive system
  • Blade wheels are made from flanged cast iron for increased durability
  • Auto shut-off after cut
  • Adjustable ball bearing blade guides
  • Cast mounted adjustable hydraulic downfeed
  • Complete coolant system
  • Four 8 inch rubber wheels for ease of movement
  • 3/4 inch Bi-Metal blade
Detailed Specifications
Part Number 414560
Model Number HVBS-712D
Cutting Capacity (W x D) (In.) 7 x 12 
Round at 90 Degrees (In.)
Round at 45 Degrees (In.) 5
Rectangle at 90 Degrees (In.) 4 x 11 / 7 x 10-1/4
Rectangle at 45 Degrees (In.) 6 x 4
Square at 90 Degrees (In.) 7 x 7 
Square at 45 Degrees (In.) 5 x 5
Throat Depth (In.)
Vertical Tables (in) 10 x 12
Vise Swivels (Deg.) 45 
Blade Speeds (SFPM) 86, 132, 178, 260 
Blade Wheel Diameter (In.) 11-3/4 
Blade Length (In.) 93 
Blade Size (In.) 3/4 x 0.032 x 93 
Bed Height (In.) with out wheels 22-1/4 
Coolant Capacity (Gal.)
Motor (HP) 3/4 HP, 115/230V, 1Ph 
Weight (Lbs.) 374
Overall Dimensions (L x W x H) (In.) 48 x 17 x 44

 


HVBS712V, 7" x 12" Variable Speed Horizontal / Vertical Bandsaw
has a 2 Year warranty

  • Sealed Hardened and Ground Gear Drive
  • Heavy Casted Iron Bow and Bed
  • large torque of New DC motor
  • Improved Wider Stand with Built-in Storage Cabinet and Chip Tray
  • Blade Wheels are made of flanged cast iron
  • CSA/US Certified
  • UL Listed Switches
  • Blade Tensioning Guides
  • Auto Shut-Off after Cut
  • Blade is fully guarded
  • Cast Mounted Hydraulic Downfeed for Ease of Cut
  • Speed changes are now done with the turn of a knob, no need to change belts
  • Four 8" Rubber Wheels for Ease of Movement
  • Tool-less Quick Change Vise Miters to 45 degrees
  • Side-Eccentric Shaft and ball bearing: Rear-Ball Bearing Blade Guides
  • Adjustable Hydraulic Feed System
  • Vertical 5" x 6" Worktable
  • STANDARD EQUIPEMENT
  • Rapid Action Vise
  • Multi-Position Blade Guide
  • Side-Eccentric Shaft and ball bearing: Rear-Ball Bearing
  • Infeed Table Assembly
  • Leveling Feed & 2 8" Rubber Wheels for Ease of Movement
  • Adjustable Tooless Material Stop
  • Bi-Metal 5/8T Blade
  • Speed changes are now done with the turn of a knob, no need to change belts
Specifications
Part Number 415559
Round at 90 Degrees (In.)
Round at 45 Degrees (In.) 4-1/2 
Rectangle at 90 Degrees (In.) 1 (H) x 12 (W); 2(H) x 11-1/4 (W); 4(H) x 11 (W); 7(H) x 10-3/8 (W) 
Rectangle at 45 Degrees (In.) 6-1/2 (H) x 4-1/2 (W) 
Square at 90 Degrees (In.) 7 x 7 
Square at 45 Degrees (In.) 4-1/2 x 4-1/2 
Throat Depth (In.)
Vise Swivels (Deg.) 45 
Blade Speeds (SFPM) 88 - 270 
Blade Wheel Diameter (In.) 11-3/4 
Blade Size (In.) 3/4 x .032 x 93 
Bed Height (In.) 22-1/4 
Motor (HP) 7.5 Amp, 3500RPM DC motor 
Overall Dimensions (L x W x H) (In.) 48 x 17 x 40 
Vertical Work Table 10 x 12 
Net Weight (Lbs.) 368 
Height 40.0000 
Length 48.0000 
Weight 418.0000 
Width 17.0000 

 

 

HVBS712DV, 7" x 12" Variable Speed Horizontal / Vertical Bandsaw Deluxe
has a 2 Year warranty

  • Sealed Hardened and Ground Gear Drive
  • Heavy Casted Iron Bow and Bed
  • large torque of New DC motor
  • Improved Wider Stand with Built-in Storage Cabinet and Chip Tray
  • Blade Wheels are made of flanged cast iron
  • CSA/US Certified
  • UL Listed Switches
  • Blade Tensioning Guides
  • Auto Shut-Off after Cut
  • Blade is fully guarded
  • Cast Mounted Hydraulic Downfeed for Ease of Cut
  • Speed changes are now done with the turn of a knob, no need to change belts
  • Four 8" Rubber Wheels for Ease of Movement
  • Tool-less Quick Lock Vise with Preset Mitering Positions at 15, 30 & 45 degrees
  • Multi-Position Blade Guide enhance use in Vertical position and increases the throat capacity from 4" to 8"
  • Adjustable Hydraulic Feed System
  • Vertical 5" x 6" Worktable
  • Large 10" x 12" Infeed Table Assembly extends the support area and can be used in either horizontal or vertical positions
  • STANDARD EQUIPEMENT
  • Tool-less Quick Lock Vise with Preset Mitering Positions at 15, 30 & 45 degrees
  • Multi-Position Blade Guide
  • Side-Eccentric Shaft and ball bearing: Rear-Ball Bearing
  • Improved wider base with Built-in Storage
  • Infeed Table Assembly
  • Leveling Feed and 2 8 inch Rubber Wheels for Ease of Movement
  • Micro Adjustable Tool-less Material Stop allows for quicker set-up and accurate repeatability
  • Adjustable Tooless Material Stop
  • Bi-Metal 5/8T Blade
  • Speed changes are now done with the turn of a knob, no need to change belts
Specifications
Part Number 415560
Round at 90 Degrees (In.)
Round at 45 Degrees (In.)
Rectangle at 90 Degrees (In.) 1 (H) x 12 (W); 2(H) x 11-1/4 (W); 4(H) x 11 (W); 7(H) x 10-1/4 (W) 
Rectangle at 45 Degrees (In.) 6 (H) x 4 (W) 
Square at 90 Degrees (In.) 7 x 7 
Square at 45 Degrees (In.) 5 x 5 
Throat Depth (In.)
Vise Swivels (Deg.) 45 
Blade Speeds (SFPM) 88 - 270 
Blade Wheel Diameter (In.) 11-3/4 
Blade Size (In.) 3/4 x .032 x 93 
Bed Height (In.) 22-1/4 
Motor (HP) 1HP,115V,1Ph , 7.5 Amp, 3500RPM DC motor 
Overall Dimensions (L x W x H) (In.) 48 x 17 x 44 
Vertical Work Table 10 x 12 
Net Weight (Lbs.) 368 
Height 44.0000 
Length 48.0000 
Weight 418.0000 
Width 17.0000 

 

jet 2 year warranty logo 2 YEAR WARRANTY AND SERVICE
WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your Jet tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.

 

OPTIONAL EQUIPMENT FOR JET 7 X 12  HORIZONTAL/VERTICAL BANDSAW
414300 Bi-Metal Bandsaw Blade 3/4 x .035 x 93 inch x 10-14VT For HVBS-7MW, J-3410, HVBS-710G/S, HBS-812G
414303 BLADE-3/4 x .035 x 93 inch x 5/8VT-HVBS-7MW
414304 Bandsaw Blade 3/4 x .035 x 93 inch x 6-10VT- Bi-Metal For  HVBS-7MW, J-3410, HVBS-710G/S, HBS-812G
5632142 Bi-Metal Bandsaw Blade 3/4 x .035 x 93 inch x 6R For HVBS-7MW, J-3410, HVBS-710G/S, HBS-812G
5632151 Bi-Metal Bandsaw Blade 3/4 x .035 x 93 inch x 8T For HVBS-7MW, J-3410, HVBS-710G/S, HBS-812G
5632161 Bi-Metal Bandsaw Blade 3/4 x .035 x 93 inch x 10/14T For HVBS-7MW, J-3410, HVBS-710G/S, HBS-812G

 

JT9-414559
HVBS-712, 7 X 12 HORIZONTAL / VERTICAL BANDSAW, MADE IN TAIWAN, SHIPS VIA LTL TRUCK FREIGHT & WEIGHT = 418 LBS
Mfg. item #: JT9-414559
WMH414559
FREE expedited shipping Plus FREE residential, liftgate and call ahead service. 4
$1,949.00

11
JT9-414560
HVBS-712D, 7 X 12 DELUXE HORIZONTAL / VERTICAL BANDSAW, MADE IN TAIWAN, SHIPS VIA LTL TRUCK FREIGHT & WEIGHT = 418 LBS
Mfg. item #: JT9-414560
WMH414560
FREE expedited shipping Plus FREE residential, liftgate and call ahead service. 4
$2,059.00

11
JT9-415559
HVBS-712V, 7 X 12 VARIABLE SPEED HORIZONTAL / VERTICAL BANDSAW, MADE IN TAIWAN, SHIPS VIA LTL TRUCK FREIGHT & WEIGHT = 418 LBS
Mfg. item #: JT9-415559
WMH415559
FREE expedited shipping Plus FREE residential, liftgate and call ahead service. 4
$2,199.00

11
JT9-415560
HVBS-712DV, 7 X 12 VARIABLE SPEED DELUXE HORIZONTAL / VERTICAL BANDSAW, MADE IN TAIWAN, SHIPS VIA LTL TRUCK FREIGHT & WEIGHT = 418 LBS
Mfg. item #: JT9-415560
WMH415560
FREE expedited shipping Plus FREE residential, liftgate and call ahead service. 4
$2,389.00

11
JT9-414300
BI-METAL BANDSAW BLADE 3/4 X .035 X 93 X 10-14VT FOR HVBS-7MW, J-3410, HVBS-710G/S, HBS-812G, MADE IN USA, WGT = 1 LBS, SHIPS UPS/FEDEX PACKAGE
Mfg. item #: JT9-414300
WMH414300
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$103.00

11
JT9-414303
BLADE-3/4X.035X 93X 5/8VT-HVBS-7MW, MADE IN USA, WGT = 1.7 LBS, SHIPS UPS/FEDEX PACKAGE
Mfg. item #: JT9-414303
WMH414303
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$103.00

11
JT9-414304
BANDSAW BLADE 3/4 X .035 X 93 X 6-10VT- BI-METAL FOR HVBS-7MW, J-3410, HVBS-710G/S, HBS-812G, MADE IN USA, WGT = 1.75 LBS, SHIPS UPS/FEDEX PACKAGE
Mfg. item #: JT9-414304
WMH414304
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$103.00

11
5632142
BI-METAL BANDSAW BLADE 3/4 X .035 X 93 X 6R FOR HVBS-7MW, J-3410, HVBS-710G/S, HBS-812G
Mfg. item #: 5632142
WMH5632142
Call for freight quote on this item or we will confirm freight charges before shipping.1
$1.00

380
5632151
BI-METAL BANDSAW BLADE 3/4 X .035 X 93 X 8T FOR HVBS-7MW, J-3410, HVBS-710G/S, HBS-812G
Mfg. item #: 5632151
WMH5632151
Call for freight quote on this item or we will confirm freight charges before shipping.1
$1.00

380
JT9-5632161
BI-METAL BANDSAW BLADE 3/4 X .035 X 93 X 10/14T FOR HVBS-7MW, J-3410, HVBS-710G/S, HBS-812G, MADE IN USA, WGT = 0.6 LBS, SHIPS UPS/FEDEX PACKAGE
Mfg. item #: JT9-5632161
WMH5632161
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$103.00

11
Copyright © 2024 Smith-Hamilton, Inc
0.009 240118 10:03