JET JTM-949EVS Electronic Variable Speed Milling M

Picture

690501 jtm-949evs Mill With X-Axis Powerfeed s-h alt

JTM-949evs
models
warranty
inspections
tool packages

JTM-949EVS/230 Mill With X-Axis Powerfeed
has a 2 Year warranty

New! JET designed Certified Meehanite casting with enhanced ribbing ensures rigidity and tolerance retention
Swing away control box houses an e-stop and puts all controls at the operators fingertips
The innovative design of the machine base provides an easier solution to level the machine without raising it up off the floor
Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
For added safety, the heavy-duty spindle break stops the spindle and interrupts the power, preventing accidental start-ups
The electrical box has been relocated to the back of the mill and houses two 115V outlets for powered accessories
CSA/CUS Certified
Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
Spindle head is internally cooled extending bearing, belt and motor life
Table and ways are hardened up to 54 HRC and precision ground for greater accuracy
The X and Y-Axis are coated with Turcite-B for reduced vibration and smooth movements
Swing away safety shield
LED work lamp
Chip pan
Dual locks on all moveable surfaces
Way covers
Drawbar
Tool box with tools

Detailed Specifications
Stock Number	690501
Model Number	JTM-949EVS
Powerfeed	X-Axis
Table Size (L x W) (In.)	9 x 49
Spindle Taper	R-8
Quill Diameter (In.)	3-3/8
Number of Spindle Speeds	Variable
Range of Spindle Speeds (RPM)	60 - 4,500
Quill Down Feed Rates (IPR)	.0015 - .003 - .006
Spindle Travel (In.)	5
Head Movement (Deg.)	90 degree R and L, 45 degree F and B
Max Distance Spindle to Table (In.)	20-3/4
Distance Spindle to Column (Max.) (In.)	18-1/8
Distance Spindle to Column (Min.) (In.)	4-3/4
Collet Capacity	1/8 - 7/8
Table Longitudinal Travel (In.)	36
Table Longitudinal Travel With Powerfeed (In.)	30-3/4
Table Cross Travel (In.)	12-5/8
T-Slots Number and Size (In.)	3 and 5/8
T-Slot Centers (In.)	2-1/2
Work Table Weight Capacity (Lbs.)	720
Travel of Knee (In.)	15-3/4
Travel of Ram (In.)	15-1/4
Saddle Width (In.)	18
Column Width (In.)	11-1/2
Inverter Type	Delta, B
Motor (HP)	3HP, 230V, 3Ph
Overall Dimensions (L x W x H) (In.)	66 x 63 x 86
Weight (Lbs.)	2,420

JET VERTICAL CNC MILLS
690575	JTM-949EVS/230 Mill With 2-Axis ACU-RITE G-2 MILLPWR CNC
690576	JTM-949EVS/230 Mill With 3-Axis ACU-RITE G-2 MILLPWR CNC
JET JTM-949EVS, 9 x 49 EVS VARIABLE SPEED VERTICAL MILLING MACHINE
691500	JTM-949EVS/230 Electronic Variable Speed Vertical Milling Machine 230V 3Ph
JET JTM-949EVS MILL PACKAGES
690501	JTM-949EVS/230 Mill With X-Axis Powerfeed
690502	JTM-949EVS Mill With X-Axis Powerfeed and Air Powered Draw Bar
690503	JTM-949EVS Mill With X and Y-Axis Powerfeeds
690504	JTM-949EVS Mill With X, Y and Z-Axis Powerfeeds
JET JTM-949EVS MILL PACKAGES WITH ACU-RITE DRO
690520	JTM-949EVS Mill With Acu-Rite 203 DRO With X-Axis Powerfeed
690521	JTM-949EVS Mill With Acu-Rite 203 DRO With X-Axis Powerfeed and Air Powered Drawbar
690522	JTM-949EVS Mill With Acu-Rite 203 DRO With X and Y-Axis Powerfeeds
690523	JTM-949EVS Mill With Acu-Rite 203 DRO With X and Y-Axis Powerfeeds and Air Powered Drawbar
690524	JTM-949EVS Mill With Acu-Rite 203 DRO With X, Y and Z-Axis Powerfeeds
690525	JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X-Axis Powerfeed
690526	JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X-Axis Powerfeed and Air Powered Draw Bar
690527	JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X and Y-Axis Powerfeeds
690528	JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X and Y-Axis Powerfeeds and Air Powered Dr
690529	JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Knee) With X, Y and Z-Axis Powerfeeds
690530	JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X-Axis Powerfeed
690531	JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X-Axis Powerfeed and Air Powered Draw Bar
690532	JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X and Y-Axis Powerfeeds
690533	JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X and Y-Axis Powerfeeds and Air Powered D
690534	JTM-949EVS Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X, Y and Z-Axis Powerfeeds
JET JTM-949EVS MILL PACKAGES WITH NEWALL DRO
690535	JTM-949EVS with Newall DP700 DRO & X Powerfeed
690536	JTM-949EVS with Newall DP700 DRO, X Powerfeed & Air Power Drawbar
690537	JTM-949EVS with Newall DP700 DRO, X & Y Powerfeeds
690538	JTM-949EVS with Newall DP700 DRO, X & Y Powerfeeds & Air Power Drawbar
690539	JTM-949EVS with Newall DP700 DRO X,Y & Z Powerfeeds
690540	JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Knee) With X-Axis Powerfeed
690541	JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Knee) With X-Axis Powerfeed and Air Powered Draw Bar
690542	JTM-949EVS DP700 3X (K) DRO X&Y PWRFD
690543	JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Knee) With X and Y-Axis Powerfeeds and Air Powered Draw Bar
690544	JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Knee) With X, Y and Z-Axis Powerfeeds
690545	JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Quill) With X-Axis Powerfeed
690546	JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Quill) With X-Axis Powerfeed and Air Powered Draw Bar
690547	JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y-Axis Powerfeeds
690548	JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y-Axis Powerfeeds and Air Powered Draw Bar
690549	JTM-949EVS Mill With 3-Axis Newall DP700 DRO (Quill) With X, Y and Z-Axis Powerfeeds

WARRANTY AND SERVICE

WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your Jet tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.

30 point inspection

JET METALWORKING'S NEWEST INNOVATION IN PROCESSES AND TECHNOLOGY
You have always counted on JET for Product innovation which we continue to do, but now we are expanding into our processes and technology. With this, we now launch our exciting new program, JET's 30+ Point Machinery Inspection.

JET's 30+ Point Milling and Turning machine process falls under the JET Red Assurance guarantee program. This is the ultimate premium service and quality assurance program offered only by JET, which includes Operational and Visual inspection of every aspect of your machine. It will save many hours of cleaning and getting the machine prepped as it is already done in our Nashville, TN headquarters and no longer on your shop floor. We put it through a complete inspection, and a signed checklist is sent with every machine inspected which will be tracked by serial number and records kept in our Tech Service department.

ALL LARGE INDUSTRIAL MILLS AND LATHES ARE INSPECTED

Operations Checked: All oil levels are checked and filled, all switches, brakes, work lamps and power settings are checked. While under power, all accuracies, gear changes, pumps, spindles and feeds are checked
Visual Inspection: Paint and finish, electrical components and connections, levers and handles
Optional Equipment and Accessories: Installed and tested

ROGRAM BENEFITS:

Builds dealer confidence that his customer will receive a machine that is inspected, cleaned and ready for operation.
Machines are inspected in our Nashville, TN headquarters.
End Users will save hours in preparing machines for use.

Rest assured, JET stands behind all of our metalworking machinery; supporting our dealers, their users and the shops they're used in. You can rely on JET for industry-leading 2 year warranty; USA based customer and tech support and over 40,000 parts in stock. 30+ point inspections are just another way JET Stands Behind Your Work.

660220 - 24- Piece Milling Tool Kit for R-8 Spindle Milling Machines

Features:

24pc Set consists of:
5pc Wiggler Set
5pc 1/2 inch HSS Boring Bars
1pc Drill Drift
3pc Edge Finders
1pc Arbor JT6 to R8
1pc Adapter R8 to MT3
1pc 3/4 inch Shank
1pc 3/4 inch Boring Head
3pc. Hex Keys
1pc 2-1/2 inch Fly Cutter
1pc 3/8 x 3 inch Square Tool Bit
1pc Blank R8 Arbor

660100KT - Milling Accessory Kit

650132 Collet Set
660012 Clamping Kit
660220 Tooling Kit
63186 Verti-lock Machine Vise

650132 - The Jet CS-R8, 6-piece R-8 Collet Set 1/8 - 3/4 inch (8ths)
has a 90 Days warranty

R-8 Collets For Use With Milling Machines
Precision hardened and ground Collets
Premium Collets with 0.0005mm T.I.R.
Premium R-8 Collet Set
6 Piece Set
1/8 to 3/4 inch by 1/8ths


	660012 - The Jet CK-12, 52-Piece Clamping Kit with Tray for 5/8" T-Slot has a 90 Days warranty Metal storage tray can be mounted on machine or wall Three complete sets to choose from 52-piece kit includes: Six T-slot nuts Six Flange nuts Four Coupling nuts Six Step blocks Six Step clamps Twenty four Studs, four each (3", 4", 5", 6", 7" & 8" lengths)


	660220 - The Jet 24- Piece Milling Tool Kit for R-8 Spindle Milling Machines has a 90 Days warranty 24pc Set consists of: 5pc Wiggler Set 5pc 1/2 inch HSS Boring Bars 1pc Drill Drift 3pc Edge Finders 1pc Arbor JT6 to R8 1pc Adapter R8 to MT3 1pc 3/4 inch Shank 1pc 3/4 inch Boring Head 3pc. Hex Keys 1pc 2-1/2 inch Fly Cutter 1pc 3/8 x 3 inch Square Tool Bit 1pc Blank R8 Arbor

63186 - The Wilton Verti-Lock Machine Vise 6 inch Jaw Width, 7-1/2 Jaw Opening has a Lifetime warranty

The ductile alloy vise body with flame-hardened bed provides solid work support, accuracy, and longevity
The fixed jaw is rated at 85,000 PSI and the annealed, surface ground sliding jaw at 70,000 PSI
Totally enclosed vise screw is cut from special alloy steel, hardened and ground.
The vise and optional swivel base have coolant troughs to channel fluid out of your way.

Compare

24- PIECE MILLING TOOL KIT FOR R-8 SPINDLE MILLING MACHINES, MADE IN INDIA, WGT = 12 LBS

Mfg. item #: JT9-660220

WMH660220

See freight charges if any at checkout. ALWAYS FREE Residential and Liftgate when Requested.¹⁰⁵³

$394.64