JET JTM-4VS Variable Speed Milling Machi

Picture

JTM-4VS Variable Speed Vertical Milling Machine 230/460V 3Ph s-h alt

JTM-4VS 3ph
More Information
models
Accessories
30+ point inspection
milling tool packages

The Jet JTM-4VS, 9 x 49 inch Table, R-8 Taper, 3HP, 3Ph, 230/460V has a 2 Year warranty

VARIABLE SPEED VERTICAL MILLING MACHINE - JTM-4VS
Meehanite casting
Precision bored and honed milling head
Large diameter quill is chromed
High precision Class 7 spindle bearings
Chrome plated motor shaft with lower bearing support
Spindle head is internally cooled
Satin chrome finished dials
Heavy-duty splined motor drive
One-piece quill pinion and shaft
Three-stage power downfeed with automatic stop
Heavy-duty spindle brake
Locks on all movable surfaces
Precision hardened and ground ways and table
Adjustable gibs throughout
Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
Tolerance test sheet included
One-shot lubrication system
Way covers
Draw bar
Tool box with tools

Detailed Specifications
Part Number	690182
Brand	Jet
Distance Spindle to Column (in.)	19
Distance Spindle to Column (min./in.)	4-1/2
Head Movement (deg.)	90 R and L 45 percent F and B
Height	88.5 inch
Length	63 inch
Max Distance Spindle to Table ( in.)	17-1/2
Model Number	JTM-4VS
Motor	3HP, 230/460V, 3Ph, Prewired 230V
Net Weight	2420 pound
Note	Use of static phase converter will void warranty
Number of Spindle speeds	Variable
Overall Dimensions	65-1/2 x 63 x 85
Prewired 230V	230V
Quill Diameter (in.)	3-3/8
Quill Down feed Rates (IPR)	.0015, .003, .006
Quill Travel (in.)	5
Range of Spindle Speeds (RPM)	60 - 4,200
Spindle Taper	R-8
T-Slot Centers (in.)	2-1/2
T-Slots Number and Size (in.)	3 and 5/8
Table Cross Travel (in.)	12
Table Longitudinal Travel (in.)	34 (maximum travel)
Table Size (in.)	9 x 49
Travel of Knee (in.)	14-1/2
Travel of Ram (in.)	13-3/8
Width	65.5 inch
Work Table Weight Capacity (lbs.)	660

WARRANTY AND SERVICE

WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your Jet tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.

JET JTM-4VS 9 x 49 VARIABLE SPEED VERTICAL MILLING MACHINES
690182	JTM-4VS Variable Speed Vertical Milling Machine 230/460V 3Ph
JET JTM-4VS MILL PACKAGES
690183	JTM-4VS Mill With X-Axis Powerfeed
690008	JTM-4VS Mill With X and Y-Axis Powerfeeds
690009	JTM-4VS Mill With X and Y-Axis Powerfeeds With Power Draw Bar
690013	JTM-4VS Mill With X, Y and Z-Axis Powerfeeds
690119	JTM-4VS Mill With Air Powered Draw Bar
JET JTM-4VS MILLS WITH ACU-RITE DRO
690202	JTM-4VS Mill With ACU-RITE 203 DRO
690107	JTM-4VS Mill With ACU-RITE 203 DRO With X-Axis Powerfeed
690125	JTM-4VS Mill With ACU-RITE 203 DRO With X-Axis Powerfeed and Power Draw Bar
690098	JTM-4VS Mill With ACU-RITE 203 DRO With X and Y-Axis Powerfeeds
690230	JTM-4VS Mill With ACU-RITE 203 DRO With X and Y-Axis Powerfeeds and Power Draw Bar
690099	JTM-4VS Mill With ACU-RITE 203 DRO With X, Y and Z-Axis Powerfeeds
690231	JTM-4VS Mill With Acu-Rite 203 DRO With X, Y & Z-Axis Powerfeeds With Air Powered Draw Bar
690184	JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill)
690221	JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill) and X-Axis Powerfeeds
690251	JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X-Axis Powerfeed and Power Draw Bar
690140	JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X and Y-Axis Powerfeeds
690139	JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X and Y-Axis Powerfeeds and Power Draw Bar
690141	JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X,Y and Z-Axis Powerfeeds
690153	JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill), X, Y and Z-Axis Powerfeeds With Power Drawbar
690400	JTM-4VS Mill With 3-Axis ACU-RITE 203 3 Axis (Knee) and Power Draw Bar
690408	JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Knee) and X-Axis Powerfeeds
690418	JTM-4VS Mill With 3-Axis ACU-RITE 303 DRO (Knee) With X, Y and Z-Axis Powerfeeds
690430	JTM-4VS Mill With 3-Axis ACU-RITE 303 DRO (Knee) With X, Y and Z-Axis Powerfeeds and Power Draw Bar
JET JTM-4VS MILLS WITH NEWALL DRO
691200	JTM-4VS Mill With Newall DP700 DRO
690087	JTM-4VS Mill With Newall DP700 DRO and X- Axis Powerfeed
690069	JTM-4VS Mill With Newall DP700 DRO With X-Axis Powerfeed and Power Draw Bar
691201	JTM-4VS Mill With Newall DP700 DRO With X and Y-Axis Powerfeeds
690115	JTM-4VS Mill With Newall DP700 DRO With X and Y-Axis Powerfeeds & Air Power Drawbar
691202	JTM-4VS Mill With 3-Axis Newall DP700 DRO (Quill)
690090	JTM-4VS Mill With 3-Axis Newall DP700 DRO (Quill) With X-Axis Powerfeed
691203	JTM-4VS Mill With 3-Axis Newall DP700 DRO (Quill) With X and Y-Axis Powerfeeds
691170	JTM-4VS Mill With 3-Axis Newall DP700 DRO (Quill) With X, Y and Z-Axis Powerfeeds and Power Draw Bar
691232	JTM-4VS Mill With 3-Axis Newall DP700 DRO (Knee) With X-Axis Powerfeed
690093	JTM-4VS Mill With 3-Axis Newall DP700 DRO (Knee) With X, Y and Z-Axis Powerfeeds
690094	JTM-4VS Mill With 3-Axis Newall DP700 DRO (Knee) With X, Y and Z-Axis Powerfeeds and Power Draw Bar

JET TABLE AND KNEE POWERFEEDS FOR MILLING MACHINES
350194	X-Axis Table Powerfeed
350195	Y-Axis Table Powerfeed
350196	Z-Axis Knee Powerfeed
987000004	Powerfeed-2X Installation Charge
987000005	Powerfeed-2Y Installation Charge
987000010	Voltage Change Labor Charge
JET RISER BLOCKS
350096	RB-8-1050, 8 Riser Block
350090	RB-6-P, 6 Riser Block
JET FLOOD COOLANT SYSTEM FOR MILLING MACHINES
A619	Flood Coolant System for Milling Machines
MILLING TOOLING KIT
660220	24-Piece Milling Tool Kit for R-8 Spindle Milling Machines
660100KT	Milling Accessory Kit
MEASURING TOOLS
630400	1-2-3 Block Set in Plastic Case
END MILL SETS
650210	20 Piece Tin-Coated Double End Mill Set
650211	20 Piece Tin-Coated Single End Mill Set
CLAMPING SETS, 52 PIECES, INCLUDING METAL STORAGE TRAY
660012	CK-12, 52-Piece Clamping Kit with Tray for 5/8 T-Slot
660038	CK-38, 52-Piece Clamping Kit with Tray for 1/2 T-Slot
660058	CK-58, 52-Piece Clamping Kit with Tray for 3/4 T-Slot
R-8 COLLET SETS
650132	CS-R8, 6-piece R-8 Collet Set
650133	Premium 6 Piece R-8 Collet Set
MILL CHUCK AND COLLET SET, WITH CARRY CASE
466001	CCS-1, R-8 Collet

30 point inspection

JET METALWORKING'S NEWEST INNOVATION IN PROCESSES AND TECHNOLOGY
You have always counted on JET for Product innovation which we continue to do, but now we are expanding into our processes and technology. With this, we now launch our exciting new program, JET's 30+ Point Machinery Inspection.

JET's 30+ Point Milling and Turning machine process falls under the JET Red Assurance guarantee program. This is the ultimate premium service and quality assurance program offered only by JET, which includes Operational and Visual inspection of every aspect of your machine. It will save many hours of cleaning and getting the machine prepped as it is already done in our Nashville, TN headquarters and no longer on your shop floor. We put it through a complete inspection, and a signed checklist is sent with every machine inspected which will be tracked by serial number and records kept in our Tech Service department.

ALL LARGE INDUSTRIAL MILLS AND LATHES ARE INSPECTED

Operations Checked: All oil levels are checked and filled, all switches, brakes, work lamps and power settings are checked. While under power, all accuracies, gear changes, pumps, spindles and feeds are checked
Visual Inspection: Paint and finish, electrical components and connections, levers and handles
Optional Equipment and Accessories: Installed and tested

ROGRAM BENEFITS:

Builds dealer confidence that his customer will receive a machine that is inspected, cleaned and ready for operation.
Machines are inspected in our Nashville, TN headquarters.
End Users will save hours in preparing machines for use.

Rest assured, JET stands behind all of our metalworking machinery; supporting our dealers, their users and the shops they're used in. You can rely on JET for industry-leading 2 year warranty; USA based customer and tech support and over 40,000 parts in stock. 30+ point inspections are just another way JET Stands Behind Your Work.

660220 - 24- Piece Milling Tool Kit for R-8 Spindle Milling Machines

Features:

24pc Set consists of:
5pc Wiggler Set
5pc 1/2 inch HSS Boring Bars
1pc Drill Drift
3pc Edge Finders
1pc Arbor JT6 to R8
1pc Adapter R8 to MT3
1pc 3/4 inch Shank
1pc 3/4 inch Boring Head
3pc. Hex Keys
1pc 2-1/2 inch Fly Cutter
1pc 3/8 x 3 inch Square Tool Bit
1pc Blank R8 Arbor

660100KT - Milling Accessory Kit

650132 Collet Set
660012 Clamping Kit
660220 Tooling Kit
63186 Verti-lock Machine Vise

650132 - The Jet CS-R8, 6-piece R-8 Collet Set 1/8 - 3/4 inch (8ths)
has a 90 Days warranty

R-8 Collets For Use With Milling Machines
Precision hardened and ground Collets
Premium Collets with 0.0005mm T.I.R.
Premium R-8 Collet Set
6 Piece Set
1/8 to 3/4 inch by 1/8ths


	660012 - The Jet CK-12, 52-Piece Clamping Kit with Tray for 5/8" T-Slot has a 90 Days warranty Metal storage tray can be mounted on machine or wall Three complete sets to choose from 52-piece kit includes: Six T-slot nuts Six Flange nuts Four Coupling nuts Six Step blocks Six Step clamps Twenty four Studs, four each (3", 4", 5", 6", 7" & 8" lengths)


	660220 - The Jet 24- Piece Milling Tool Kit for R-8 Spindle Milling Machines has a 90 Days warranty 24pc Set consists of: 5pc Wiggler Set 5pc 1/2 inch HSS Boring Bars 1pc Drill Drift 3pc Edge Finders 1pc Arbor JT6 to R8 1pc Adapter R8 to MT3 1pc 3/4 inch Shank 1pc 3/4 inch Boring Head 3pc. Hex Keys 1pc 2-1/2 inch Fly Cutter 1pc 3/8 x 3 inch Square Tool Bit 1pc Blank R8 Arbor

63186 - The Wilton Verti-Lock Machine Vise 6 inch Jaw Width, 7-1/2 Jaw Opening has a Lifetime warranty

The ductile alloy vise body with flame-hardened bed provides solid work support, accuracy, and longevity
The fixed jaw is rated at 85,000 PSI and the annealed, surface ground sliding jaw at 70,000 PSI
Totally enclosed vise screw is cut from special alloy steel, hardened and ground.
The vise and optional swivel base have coolant troughs to channel fluid out of your way.

Compare

CALL 800-458-3687 FOR EXPERT ADVICE ON THIS JET
24- PIECE MILLING TOOL KIT FOR R-8 SPINDLE MILLING MACHINES /SHIP WGT = 12 LBS

Mfg. item #: JT9-660220

WMH660220

ADD TO CART To See Freight Charges, if any. All TRUCK FREIGHT Deliveries Include Residential, Lift-gate & Call Ahead Services at No Extra Charge.¹⁰⁵²

$377.17