JET JWL-1640EVS 16 X 40 Wood Lathe

JWL-1640EVS 16 x 40 inch Wood Lathe has a 5 Year warranty

• Headstock slides and rotates for maximum versatility
• Extended spindle nose houses dual headstock spindle bearings
• Improved tailstock quill locking mechanism incorporates an anti-rotation key
• Tailstock features Acme threads for smooth and durable movement
• Banjo uses non-marring, positive locking wedge system to securely hold tool post
• Tool post locking mechanism designed for year of consistent strength
• Spindle lock latch frees up both hands
• Electronic infinitely variable speed from 40 - 3200 RPM
• 36 integrated indexing positions
• Newly designed headstock locking handle accessible from front of lathe
• Convenient leg-mounted tool holder
• Inverter is enclosed for added protection
• E Drive Inverter features a built in EMI filter
• Conveniently located digital readout
• Rubber tool mat on top of headstock

#1 BEST SELLING CHUCK
SUPER NOVA 2 CHUCK

This powerful and solid chuck is perfect for use on lathes with up to 20 inch/508mm swing. Brilliant all around geared chuck for a majority of users.

Product Technical Specification Recommended for power workholding on lathes from 350mm (14 inch) to 508mm (20 inch) diameter swing. Up to 736mm/29 inch diameter bowls (using PowerGrip accessory jaws) Up to 482mm/19 inch length spigots (using PowerGrip accessory jaws)   Up to 310mm/12 inch bowl (using standard 50mm accessories jaw) Up to 150mm/6 inch lengh x 10mm/4 inch diameter (using standard 50mm accessories jaw) Full Packaged Weight (Std) 2.5kgs/5.512lbs 24 Division Index built into the backing plate design. #2 BEST SELLING CHUCK NOVA G3 CHUCK The Nova G3 chuck is the next generation smaller geared chuck.  Its an ideal chuck for Mini, Midi and smaller lathes with up to 360mm/14 inch diameter swing. Provides high power geared chuck option for smaller lathes. Its light weight, and with less overhang which is perfect for smaller lathe spindles. The small 1.79 inch body length delivers less overhang from the spindle than the larger geared Chucks - the SuperNova2 Chuck and the Nova Titan Chuck, reducing stress on smaller lathe spindles. Note: If your lathe is less than 14 inch diameter swing, please have a look at the Nova Precision Midi chuck.  If your lathe has more than 14 inch diameter swing, please have a look at the SuperNova2 Chuck or the NOVA Titan Chuck. Features standard on all NOVA chucks: Quality Materials. Precision Machining. Common Accessory Jaw Fixing Profile compatible across all NOVA chucks and accessories. High Tech Precision Composite Jaw Slides. Special Woodturning Dovetail Profile on Jaws. Auto Safety Stop Feature. Jaw slides cant protrude past the chuck body. Comprehensive Instructions. Common Insert/Adaptor Fitting compatible across all NOVA chucks. Safe Lock Woodworm Screw.  2 Years Warranty Additional G3 Features and Benefits Small, Compact Design. Minimises load on small spindles and bearings. Precision Machined.  Open back for easy cleaning. Powerful Geared Grip with Tuff Lock Technology. Precise, hardened geared action delivers incredible smooth strength. Solid, vibration free. Single Handed Operation. Chuck key has fast, positive location, easy and comfortable to use. More time spent turning and less time spent preparing.   Body made from precision machined 1045 High Tensile Steel, with a polished self metal finish to allow for closer tolerances. Able to take all NOVA accessories jaws. However please note: the larger accessory jaws in the NOVA chuck range are not recommended for use on the NOVA G3 Chuck.  For more information, consult your NOVA Accessory Jaw Manual, or the NOVA Accessory Webpages. 2 Year Warranty. Product Technical Specification Recommended for power workholding on lathes up to 400mm/14 inch diameter swing. Up to 350mm/14 inch diameter bowls using 50mm/2 inch Jaws (supplied with chuck) Up to 50mm/2 inch length spigots (using 50mm/2 inch Jaws (supplied with chuck)  Full Packaged Weight (Std) 1.4kgs/3.1lbs.
Compatibility Capable to take entire NOVA Jaws range. (except Titan Power Grip which specially designed for Titan Chuck) Only NOVA Chucks give you the same jaw fixing system and same insert/adaptor system across all chuck models. This means all accessory jaws in the range fit all the chucks in the range, including older chuck models, giving you the ultimate flexibility. In buying a NOVA chuck, you can be confident that whether you want to move up or down the range, any accessories you have invested in will Fit.
Standard Equipment Chuck Body and Jaw Slides (Comes fully assembled) 50mm/2 inch Jaws Safe Lock Woodworm Screw Manual and Fastenings Display/Storage Box T Bar Allen Head Handle with Soft Plastic Grip Insert/Adaptor (some resellers may sell this separately, check with them)	Threads Covered: Std Insert/Adaptor Type Chuck (Code 23055) Requires an insert to fit to lathe. Some resellers may sell this separately, check with them. M33x3.5 Dedicated Threaded Chuck (Code 23062)

*** Chucks Require Seperate Insert for Final Insulation & Additional Jaws Sizes are Available ***

Easy Rougher - The Next Step in Woodturning

The Easy Rougher is a carbide cutter woodturning tool that addresses fatigue, safety, and efficiency like no other type of tool on the market. Designed to be kept flat on the tool rest and level to the floor, the Easy Rougher will effortlessly hog away massive amounts of material for any woodturning process without the need for sharpening. The tool design provides support directly beneath the cutting edge transferring the cutting pressure downward allowing the lathe to take the pounding that you would normally suffer through when using a conventional bowl gouge for roughing. No more white knuckling a bowl gouge.

• Cuts left, right and straight in without changing approach angle
• Truly deeper cuts up to 1 inch off the diameter in one pass with the Full Size Rougher.
• Requires very little physical strength or exertion
• Your feet and hips stay in nearly the same position for the blank roughing process.
• Very minimal handle bouncing on irregular shaped blanks
• Reduced kick-back or sucking into work piece
• Available Chip Deflector keeps most projectiles away from the face and neck
• No intimidating cutting angles to learn and remember
• No bevels to ride
• No fear of a dangerous catch

Easy Finisher - Yet Another Innovation in Woodturning

With another step forward in woodturning innovation, Easy Wood Tools now offers you a tool to take up where the Easy Rougher leaves off. The Easy Finisher has a round carbide cutter perfect for doing the inside work on smaller bowls and for larger coves on spindle work. Our carbide inserts are made in the USA and we are pleased to offer you a tool that is 100 percent made in America.

If you own one of our existing Easy Roughers, you well know by now that we deliver even more than we advertise, as hard as is was for you to believe before your first purchase. I assure you the productivity of this tool will exceed your highest expectations. You just can not predict the possibilities or joy this tool will provide you. In testing the prototypes for this new design, I found myself creating forms that were never even on my list to try because the dangers and complications of existing tools were just not worth the trouble.  Craig Jackson, Founder

Like the other Easy tools, the Easy Finishers are designed to be used with the tool rest set so that when the tool is held level the top of the cutter is on center. Then just keep it level to the floor and flat on the tool rest for all types of cuts... it does not get any easier than that. There are no complicated approach angles, or bevels to ride. The design of this tool allows the Easy Finisher to effortlessly cut from the center of a bowl out to the rim OR from the rim to the center! All without changing any angles whatsoever. You just stand in one spot and cut coming and going until you get to the shape you want.

The Easy Finisher utilizes the same carbide cutter technology as the Easy Rougher that reduces strain and fatigue, improves productivity, and virtually eliminates sharpening. It comes loaded with one round cutter and when it gets dull, you just rotate the cutter for a fresh cut. Please note: The round cutters are not interchangeable with the carbide cutters on the Easy Rougher tool bars.

When the cutter eventually gets dull, just loosen the retaining screw and rotate cutter about 1/4 of a turn, then re-tighten the screw.

We promise this tool will open up a whole new level of design possibilities for your craft and it will exceed your expectations. If not, return for a complete refund.

Replacement carbide cutter number is engraved right on the tool bar.

Available in four sizes - Mini, Mid-Size, Full-Size and Pro. See purchase page for all products, sizes and accessories.

Easy Rougher - The Next Step in Woodturning

The Easy Detailer tools really pick up where other tools leave off and provide another level of woodturning creativity as the unique diamond cutter shape fits in tight places where the cutters on the other tools will just not fit.

These tools were designed for the primary purpose of doing the small intricate work and cutting final details on your projects such as small coves and beads on both spindle and bowl work. They are also very handy for cutting chuck tenons and making inside reverse angle cuts for inside chucking bowls with dovetail jaws. You may find they work well for hogging your green wood projects too.

The Easy Detailers are engineered to cut going straight in employing just the nose of the tool.

The Easy Detailer tools are engineered with a reduced relief angle to the long cuttings edges making the long edges less aggressive when held in contact with the wood as the nose of the tool is cutting. In use, the long edge is intended to perform as a "control surface" and serve to be in contact with the wood just behind the cut; much like a bevel is being rubbed.

For safety reasons, avoid plunging the tool so deep into the work at once to the depth you would have both sides of the cutter in contact with the wood too greatly at the same time. This could cause too much force at once and lead to binding of the tool in the groove.

Each diamond-shaped Easy Detailer cutter is engineered to fit all size Detailer tools in our current product line. When the cutter eventually dulls, just loosen the retaining screw and rotate cutter, then re-tighten the screw.

Replacement carbide cutter number is engraved right on the tool bar.
Available in four sizes - see purchase page for all products, sizes and accessories.