JET JWL-1840 Series Lathes

features
Specifications
Warranty
models
jet chuck and tools

Features:

Extended spindle nose houses dual headstock spindle bearings
Four inch cast iron risers allow user to adjust height of lathe for maximum comfort
Improved tailstock quill locking mechanism incorporatesb an anti-rotation key
Tailstock features Acme threads for smooth and durable movement
Banjo uses non-marring, positive locking wedge system to securely hold tool post
Tool post locking mechanism designed for year of consistent strength
Spindle lock latch frees up both hands
Variable speed from 40 - 3200 RPM
36 integrated indexing positions
Newly designed headstock locking handle accessible from front of lathe
Remote emergency stop button can be situated along the lathe bed
Convenient leg-mounted tool holder
Inverter is enclosed for added protection
Conveniently located digital readout
Rubber tool mat on top of headstock

Specifications
Stock Number	719600
Model Number	JWL-1840EVS
Swing Over Bed (In.)	18-1/2
Swing Over Tool Rest Base (In.)	14-1/4
Distance Between Centers (In.)	40
Centerline of Spindle to Floor (In.)	39-1/4; 43-1/4 w/risers
Bed Construction	Cast Iron
Bed Gap (In.)	1-3/4
Headstock Movement	Slide and Rotate
Spindle Bore (In.)	5/8
Spindle Taper	MT2
Spindle Thread (In./TPI)	1-1/4in/8 TPI
Speed Range	40-3200
Spindle Speeds	High 120-3200/Low 40-1200
Number of Indexing Positions	36
Quill Taper	MT2
Quill Travel (In.)	4-1/4
Tailstock Bore (In.)	3/8
Motor Amps	6.1
Motor Power (HP)	2
Motor Phase (PH)	1
Motor Voltage (V)	230
Prewired Voltage (V)	230

WARRANTY AND SERVICE

WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JetÃÂ® tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.

Lathes and Accessories
719600	JWL-1840EVS LATHE 2HP, 230V
719601	JWL-1840CB Comparator Bracket

JET CHUCK SET (719900)

JET Lathe Chuck Set 1 inch x 8TPI

To compliment our extensive line of woodturning lathes, JET is introducing a nickel plated chuck with five unique sets of jaws, to keep projects securely on your lathe. Inside the custom JET molded case you will find: 1x Nickel Plated Chuck 1 inch X 8TPI 1x 190mm Nickel Plated Face Plate with 16 Grip studs 1x Nickel Plated Pin jaws (inside grip range 5-43mm, outside grip range 22-60mm) 1x #1 Round jaws (inside grip range 38-73mm, outside grip range 48-87mm) 1x #2 Round jaws (inside grip range 66-100mm, outside grip range 77-117mm) 1x Internal/external step jaws (inside grip range 8-43mm, outside grip range 20-78mm) 2x Woodworm screw (1/2 and 3/8 inch) 1x T-handle 1x 100mm Hex wrench The Jet Chuck Set (719900) fits JET models JWL-1015, JWL-1221, JWL1440, or any lathe with a 1 inch x 8TPI Spindle Thread. To fit to JET JWL-1640 and JWL-1840 (or any 1-1/4" spindle thread) use the JET Lathe Chuck Adaptor (719903).

Features:

Fits JET Lathe Models JWL-1015, JWL1221, JWL1440 and other models with a 1"x 8 TPI spindle thread.
Packed securely in a hard plastic JET case with EVA foam.
Chuck is nickel plated to deter rust
Includes 5 sets of interchangeable jaws with self centering chuck for varying tasks
Stainless steel T-Handle adjusts jaws concentrically
Weight 11 lbs

JET CHUCK SET (719900)
Inside the custom JET molded case you will find:

Nickel Plated Chuck 1 inch X 8TPI
190mm Nickel Plated Face Plate with 16 Grip studs
Nickel Plated Pin jaws (inside grip range 5-43mm, outside grip range 22-60mm)
#1 Round jaws (inside grip range 38-73mm, outside grip range 48-87mm)
#2 Round jaws (inside grip range 66-100mm, outside grip range 77-117mm)
Internal/external step jaws (inside grip range 8-43mm, outside grip range 20-78mm)
Woodworm screws (1/2 and 3/8 inch)
T-handle and Hex wrench The JET Chuck Set (719900) fits JET models JWL-1015, JWL-1221, JWL1440, or any lathe with a 1inch x 8TPI Spindle Thread

JET Woodturning Carbide Chisels 6 Piece Set - (719901)

JET Woodturning Carbide Chisels 6 Piece Set - (719901)

To compliment our extensive line of woodturning lathes, JET is introducing the Woodturning Chisel Set. Inside the custom JET wooden case you will find: 1x 11 inch Anodized Aluminum Handle 1x 10.5 inch Anodized Aluminum Handle Extension 1x Stainless Steel Tool Shaft 1x 11mm Square Carbide Cutting Blade 1x 11mm Square-Arc Carbide Cutting Blade 1x 12mm Round Carbide Cutting Blade 1x 28mm Carbide Diamond Cutting Blade 1x Star Key 1x Hex Wrench

Features:

JET Carbide Turning Tool Set includes 4 interchangeable cutting blades: Square (11mm), Square Arc (11mm), Round (12mm), and Diamond (28mm).
Light weight extendable anodized aluminum handle. Main handle is 11 inch with a 10.5 inch extension.
JET Carbide Turning Tool Set is packed in a custom wood case.
Stainless steel shaft will not rust
Carbide blades have a long cutting life

JET Woodturning Carbide Hollowing Chisels Set 5PC

JET Woodturning Carbide Hollowing Chisels Set 5PC

To compliment our extensive line of woodturning lathes, JET is introducing the Woodturning Hollowing Chisel Set. Inside the custom JET wooden case you will find: 1x 11 inch Anodized Aluminum Handle 1x 10.5 inch Anodized Aluminum Handle Extension 3x Tool Shafts 3x 8.9mm Round Carbide Cutting Blades 1x Star Key 1x Hex Wrench

Features:

JET Carbide Hollowing Chisels Set includes 3 interchangeable radius for hollowing while works on the lathe
Light weight extendable anodized aluminum handle. Main handle is 11 inch with a 10.5 inch extension.
JET Carbide Turning Tool Set is packed in a custom wood case.
Stainless steel shaft will not rust
Carbide blades have a long cutting life

Jet Chuck and Turning Tools
719900	JET Lathe Chuck
719901	JET Wood Turning Chisel Set
719902	JET Wood Turning Hollowing Chisel Set
719903	1 inch x 8TPI to 1-1/4 inch x 8TPI adaptor
719951	11mm Sq Carbide Insert 2PC
719952	11mm Sq Arc Carbide Insert 2PC
719953	12mm Round Carbide Insert 2PC
719954	28mm Diamond Carbide Insert 2PC
719955	8.9mm Round Carbide Insert 2PC