The new model JWS-25X Shaper features a powerful 3HP motor with magnetic controls. The large 25" x 25-1/2" precision ground cast iron table provides plenty of support. Safe, easy cutter set up is assisted by a positive detent spindle lock. The independently adjustable left and right fence has a built in 4"dust port.
The Jet JWS-25X, JET Shaper, 3HP, 1PH
has a 5 Year warranty
Detailed Specifications | |
---|---|
Brand | Jet |
Digital Readouts | n.a. |
Dust Collection Minimum CFM Required | 350 cu.ft/min |
Dust Port Outside Diameter | 4 " |
Electrical Controls - Magnetic Starter | Yes |
Fence Size (L x H) | 14 1/2 x 4 3/4 " |
Fence Travel (Major and Minor) | 4 1/4 and 15/16 " |
Height | 23 inch |
Length | 43 inch |
Maximum Diameter Cutter Above Table | 7 " |
Maximum Diameter Cutter Below Table | 6 " |
Model Number | JWS-25X |
Motor Current | 16 A |
Motor Phase | 1 Ph |
Motor Power | 3 HP |
Motor Voltage | 230 V |
Net Weight | 331 pound |
Part Number | 708309 |
Prewired Voltage | 230 V |
Reversable | Yes |
Router Bit Collet Diameter | 1/4 and 1/2 " (optional) |
Spindle Diameter | 1/2 and 3/4 " |
Spindle Size Under Nut | 1/2 (2 13/64) and 3/4 (3 3/16) " |
Spindle Speed | 7500 and 10,000 RPM |
Spindle Travel | 3 1/2 |
Table Height From Floor | 33 " |
Table Insert Opening Diameter | 2 9/16 and 4 21/64 " |
Table Inserts | 2 |
Table Opening Diameter | 6 9/32 " |
Table Size | 25 x 25 1/2 " |
Table T-Slot | 3/4 x 3/8 " |
Tilting Spindle | n.a. |
Width | 25 inch |
![]() |
WARRANTY AND SERVICE WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your Jetî tools. For the name of an Authorized Service Center in your area call 1-800-274-6848. |
JETî SHAPERS and Accessories | |
---|---|
708309 | JWS-25X, Shaper, 3HP 1PH 230V, 1/2" & 3/4" Spindles |
708388 | Spindle 1/2" for JWS-25X Shaper |
708387 | Spindle 3/4" for JWS-25X Shaper |
708318 | Spindle 1" for JWS-25X Shaper |
708382 | Spindle 30mm for JWS-25X Shaper |
708383 | Collet Set 1/4" for JWS-25X Shaper |
708384 | Collet Set 1/2" for JWS-25X Shaper |
708118 | Mobile Base |