718200K JWJ-8CS, 8 inch Closed Stand Jointer, 2HP, 1PH, 230V |
718250K JWJ-8HH, 8 inch Helical Head Jointer, 2HP, 1PH, 230V |
Specifications | |
---|---|
Model number | 718200K |
Number of Knives | 3 |
Standard Knife Size (L x W x T) (In.) | 8 x 11/16 x 1/8 |
Cuts Per Minute | 16500 |
Cutterhead Speed (RPM) | 5500 |
Cutting Capacity (W x D) (In.) | 8 x 1/2 |
Table Size (L x W) (In.) | 72 x 9 |
Table Height from Floor (In.) | 31-1/4 |
Rabbeting Capacity (In.) | 1/2 |
Rabbeting Ledge (In.) | 3-1/8 x 8-3/4 |
Fence Size (L x H) (In.) | 38-1/2 x 4-3/4 |
Fence Tilt (Deg.) | 45 L, 45 R |
Fence Positive Stops (Deg.) | 45 L, 90, 45 R |
Dust Collection Minimum CFM Required (CFM) | 350 |
Dust Port Outside Diameter (In.) | 4 |
Motor Power (HP) | 2 |
Motor Phase (PH) | 1 |
Motor Amps | 12 |
Specifications | |
---|---|
Part Number | 718250K |
Number of Knives | 36 |
Helical Knife Size (L x W x T) (In.) | 15 x 15 x 2.5 |
Cutterhead Speed (RPM) | 5500 |
Cutting Capacity (W x D) (In.) | 8 x 1/2 |
Table Size (L x W) (In.) | 72 x 9 |
Table Height from Floor (In.) | 31-1/4 |
Rabbeting Capacity (In.) | n/a |
Fence Size (L x H) (In.) | 38-1/2 x 4-3/4 |
Fence Tilt (Deg.) | 45 L, 45 R |
Fence Positive Stops (Deg.) | 45 L, 90, 45 R |
Dust Collection Minimum CFM Required (CFM) | 350 |
Dust Port Outside Diameter (In.) | 4 |
Motor Power (HP) | 2 |
Motor Phase (PH) | 1 |
Motor Amps | 12 |
Recommended Circuit Size (Amps.) | 20 |
Detailed Specifications | |
---|---|
Brand | Jet |
Cutterhead Speed | 5500 RPM |
Cutting Capacity (W x D) | 8 x 1/2 inch |
Dust Collection Minimum CFM Required | 350 cu.ft/min |
Dust Port Outside Diameter | 4 inch |
Family Description | 8 inch JOINTER |
Fence Positive Stops | 45 degree left, 45 degree and 90 degree right |
Fence Size (L x H) | 38 1/2 x 4-3/4 inch |
Fence Tilts | 45 degree left, 45 degree right |
Height | 36 inch |
Length | 72 inch |
Model Number | JJ-8CS / JJ-8HH |
Motor Current | 12 A |
Motor Phase | 1 Ph |
Motor Power | 2 HP |
Motor Voltage | 230 V |
Net Weight | 411 pound |
Number of Knives (Helical/Standard) | 4 Knive Set / 36 four-sided inserts |
Part Number | 708458K / 708468K |
Prewired Voltage | 230 V |
Table Height | 31-1/4 inch |
Table Size (L x W) | 66 1/2 x 9 inch |
Width | 26 inch |
|
WARRANTY AND SERVICE WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your Jetî tools. For the name of an Authorized Service Center in your area call 1-800-274-6848. |
CALL NOW 800-458-3687 FOR EXPERT ADVISE
OR ADD TO CART FOR YOUR EXCLUSIVE BROTHER-IN-LAW DEAL ON THIS JET ITEM, LIMITED QUANTITY AVAILABLE
CALL NOW 800-458-3687 FOR EXPERT ADVISE
OR ADD TO CART FOR YOUR EXCLUSIVE BROTHER-IN-LAW DEAL ON THIS JET ITEM, LIMITED QUANTITY AVAILABLE