Jet ZX Series Large Spindle Bore Lathes

At a glance
Specifications
Warranty
models

The Jet LARGE SPINDLE BORE PRECISION LATHE has a 2 Year warranty

3-1/8 inch bore spindle is supported by two tapered and one ball bearings
Chrome molybdenum headstock gears are hardened, ground and shaved
Universal gearbox allows inch, metric, diametral and module pitch threads, no change gears required
Carriage features one-shot lubrication and Turcite-B on bed sliding surfaces
T-slotted compound slide featuring quick change tool post
One piece cast iron base absorbs vibration allowing heavier cuts
High quality ANSI Class 50 wear resistant cast iron bed ways are
Removable gap allows large diameter work
Five position automatic carriage stop increases productivity
Meehanite Castings
Siemens Electrics

STANDARD EQUIPMENT

10 inch 3-jaw scroll chuck with top reversing jaws
12 inch face plate
5pc. Quick change tool post set
Follow rest
Large capacity steady rest with ball bearing tips
Fully integrated coolant system
Full length splash guard and coolant return
Large easy to use foot brake
Articulating LED work lamp
Electronic Chuck Key Holder
Fitted top mats to hold tooling
Centrally located controls with jog button
Threading dial
Mounting pads and levelers
Live center
Tolerance Test Certificate
Tool box and adjusting tools
E-Stop on Carriage for added safety

Specifications
Size	16 x 40
Swing Over Bed (In.)	16
Swing Over Cross Slide (In.)	10
Swing Through Gap (In.)	25-7/8
Length of Gap (In.)	12-1/4
Distance Between Centers (In.)	40
Spindle Bore (In.)	3-1/8
Spindle Mount	D1-8
Number of Spindle Speeds	12
Range of Spindle Speeds (RPM)	25 - 1,800
Spindle Taper with Sleeve	MT-7 (MT-5)
Number of Longitudinal and Cross Feed Rates	46/31
Range of Longitudinal Feeds (IPR)	.0015 - .0900
Range of Cross Feeds (IPR)	.0006 - .0360
Number of Inch Threads	61
Range of Inch Threads (TPI)	1-5/8 - 72
Number of Metric Threads	24
Range of Metric Threads	.05 - 20
Max Tool Size (In.)	1 x 1
Compound Slide Travel (In.)	5-1/8
Cross Slide Travel (In.)	9
Carriage Travel (In.)	35
Tailstock Spindle Travel (In.)	5
Taper in Tailstock Spindle	MT-4
Follow Rest Capacity (In.)	1/2 - 3-1/2
Steady Rest Capacity (In.)	3/8 - 7
Width of Bed (In.)	13-1/8
Motor (HP)	7-1/2 HP, 230/460V, 3Ph
Prewired (V.)	230V, **SURCHARGE APPLIES FOR 460V RE-WIRE
Overall Dimensions (L x W x H) (In.)	96 x 44 x 66
Drive	Geared Head
Style (Type)	Engine - Large Spindle Bore
Weight (Lbs.)	5,475
Height	66.0000
Length	97.0000
Weight	5275.0000
Width	44.0000

2 YEAR WARRANTY AND SERVICE
WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your Jet tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.

JET GH-1640ZX LARGE SPINDLE BORE PRECISION ENGINE LATHE
321930	GH-1640ZX, 3-1/8 Spindle Bore Geared Head Lathe
JET GH-1640ZX LARGE SPINDLE BORE PRECISION ENGINE LATHE PACKAGES
321474	GH-1640ZX With Taper Attachment
321439	GH-1640ZX With Collet Closer
JET GH-1640ZX LATHES WITH ACU-RITE DRO
321475	GH-1640ZX With ACU-RITE 203S DRO
321508	GH-1640ZX With ACU-RITE 203S DRO With Taper Attachment
321495	GH-1640ZX With ACU-RITE 203S DRO With Collet Closer
321445	GH-1640ZX With ACU-RITE 203S DRO With Taper Attachment and Collet Closer
321381	GH-1640ZX With ACU-RITE 300S DRO
321382	GH-1640ZX With ACU-RITE 300S DRO With Taper Attachment
321383	GH-1640ZX With ACU-RITE 300S DRO With Collet Closer
JET GH-1640ZX LATHES WITH NEWALL DRO
321138	GH-1640ZX With Newall DP700 DRO
321148	GH-1640ZX With Newall DP700 DRO With Taper Attachment
321494	GH-1640ZX With Newall DP700 DRO With Collet Closer
321147	GH-1640ZX With Newall DP700 DRO With Taper Attachment and Collet Closer
JET TAPER ATTACHMENTS
321291	TAK-ZX, Taper Attachment Kit for All ZX Lathe Models
987000009	Voltage Change Labor Charge
JET COLLET CLOSERS
321292	CC-ZX, Collet Closer for All ZX Lathe Models
JET TURNING TOOLING KITS
660210	23 Piece Turning Tool Kit For ZX Series Lathes
5C COLLET SETS
650016	Premium 35 Piece 5-C Collet Set With Rack (1/32nd)
TOOL POST SETS
321431	STP-13BD, Single Tool Post
650295	200 Series Quick Change Wedge Type Tool Post Set
650300	300 Series Quick Change Wedge Type Tool Post Set
650305	400 Series Quick Change Wedge Type Tool Post Set
650275	CXA Aloris Intro Set for 16 ZX Lathes