chat now with southern tool
Technical Sales 1–800–458–3687

Laguna Jointers

 6 inch WEDGEBED SHEARTECII 110V - 1.5 HP - 1 Hz 8 inch DOVETAIL SHEARTECII 220V - 2 HP - 1 Hz 8 inch PARALLELOGRAM SHEARTECII 220V - 3 HP - 1 Hz 12 inch SHEARTECII 220V - 5 HP - 1 Hz
6 inch WEDGEBED SHEARTECII
110V - 1.5 HP - 1 Hz
8 inch DOVETAIL SHEARTECII
220V - 2 HP - 1 Hz
8 inch PARALLELOGRAM
SHEARTECII 220V - 3 HP - 1 Hz
12 inch  SHEARTECII
220V - 5 HP - 1 Hz

 

Models and Accessories
MJOIN6100-0130 6 inch WEDGEBED SHEARTECII 110V - 1.5 HP - 1 Hz
MJOIN8012-0130 8 inch DOVETAIL SHEARTECII 220V - 2 HP - 1 Hz
MJOIN8020-0130 8 inch PARALLELOGRAM SHEARTECII 220V - 3 HP - 1 Hz
MJOIN12X86-5-1-0130 12 inch  SHEARTECII 220V - 5 HP - 1 Hz

 

6" Wedgebed Jointer

6 inch Jointer ShearTec II

The Laguna 6 inch Jointer with ShearTec II is a premium jointer giving you more of everything. Enclosed stand makes a stronger base, 1.5 HP gives you more power, longer beds (56 inch) allows for bigger jobs and last but not least: 6 row ShearTec II cutterhead with a total of 42 four-sided carbide inserts gives you the smoothest cut and longest life.The Laguna ShearTec II is at the cutting edge of Spiral Cutterhead technology today. Deep gullets allow chips to exit fast & keep the head clean.

The inserts are made from thicker solid German carbide and set into the head on a flat surface rather than a cone design. This allows more torque to be used when tightening the inserts. All of the inserts are slightly angled to give a shear type cut with low impact and less kick-back action. The leading edge is crowned to minimize lines appearing

Laguna ShearTec II heads are all 6 row; most competitors heads offer just 3 or 4 rows. There obviously are a host of benefits associated from the additional rows: More carbide inserts, longer life, less noise and vibration, less kickback and smoother finish.

There obviously are a host of benefits associated from the additional rows: More carbide inserts, longer life, less noise and vibration, less kick-back and smoother finish.

Specifications:

  • Motor 1.5 HP, 110 Volt, TEFC
  • Motor Amperage Rating: 13A
  • Cutter-Head: 5000 RPM
  • Adjustment: Wedge-Bed w. Lever
  • Cutting Width: 6 inch
  • Cutting Depth: 1/2 inch
  • Rabbeting Capacity: 1/2 inch
  • Knife System: ShearTecII
  • 4 Sided Solid Carbide 6 Rows X 7 = 42
  • Cutter-Head Diameter:2.4 inch
  • Table Dimensions: 6” X 56 inch
  • Fence Dimensions: 4” X 29 inch
  • Fence Tilt: 90 deg and 45 deg with Positive Stop
  • Table Height: 32.2 inch
  • Dust Port: 4 inch
  • Wheel System: Built-In
  • Weight (Net/Ship) 388/425 Lbs.

 

8 inch Wedgebed Jointer

8 inch Wedgebed Jointer ShearTec II

The Laguna 8 inch Wedgebed Jointer ShearTec II Cutterhead is the perfect “step-up” jointer with increased capacity for serious woodworking.The oversized tables provide plenty of support to easily flatten long, wide boards while the large center mounted cast-iron fence allows for maximum stock support when edge jointing.The cast-iron infeed and out-feed tables feature independent adjustment on dovetail ways.

The Laguna ShearTec II is at the cutting edge of Spiral Cutterhead technology today. Deep gullets allow chips to exit fast and keep the head clean. The inserts are made from thicker solid German carbide & set into the head on a flat surface rather than a cone design. This allows more torque to be used when tightening the inserts. All of the inserts are slightly angled to give a shear type cut with low impact and less kick-back action. The leading edge is crowned to minimize lines appearing.Laguna ShearTec II heads are all 6 row; most competitors’ heads offer just 3 or 4 rows. There obviously are a host of benefits associated from the additional rows: More carbide inserts, longer life, less noise and vibration, less kick-back and smoother finish

Specifications:

  • Motor: 2HP, 220 Volt, 1 phase,TEFC
  • Cutter-Head RPM:5600
  • Motor Amperage Rating: 8A
  • Adjustment: Wedge-Bed w. Crank
  • Max. Width: 8 inch
  • Max. Depth:  1/2 inch
  • Rabbeting Capacity:  1/2 inch
  • Knife System: Shear-TecII
  • 4 Sided Carbide 6 Row X 9 = 54
  • Cutter-Head Diameter: 3 inch
  • Table Dimensions: 8 x 75 inch
  • Fence Dimensions: 4-5/8 x 38 inch
  • Fence Tilt: 45 Degree. 90 and 45 Positive Stop
  • Table Height: 32 inch
  • Dust Port: 4 inch
  • Wheel System: Built-In
  • Weight (Net/Ship) 510/600 Lbs.
  • CSA

 

8" Parallelogram Jointer

8 inch Parallelogram Jointer

Unique parallelogram support system allows the table to move in the same arc as the cutterhead when raised or lowered. This uniform, close clearance to the cutting blade acts as a more efficient chip breaker.Cabinet stand completely encases motor and pulleys to protect from dust and shavings.The specially designed cast-iron fence is extra long for continued support throughout the cut.Modular cutterhead provides a consistently clean cut.

Jack-screw arrangement allows easy replacement and adjustment of individual knives. In the event the entire cutter-head has to be removed, a new module can be fitted in place without production down-time. The extralong table provides a full 83 inch of work support. The Laguna ShearTec II is at the cutting edge of Spiral Cutter head technology today. Deep gullets allow chips to exit fast and keep the head clean. The inserts are made from thicker solid German carbide and set into the head on a flat surface rather than a cone design. This allows more torque to be used when tightening the inserts. All of the inserts are slightly angled to give a shear type cut with low impact and less kick-back action. The leading edge is crowned to minimize lines appearing. Laguna ShearTec II heads are all 6 row; most competitors heads offer just 3 or 4 rows.

There obviously are a host of benefits associated from the additional rows: More carbide inserts, longer life, less noise and vibration, less kick-back and smoother finish.There obviously are a host of benefits associated from the additional rows: More carbide inserts, longer life, less noise and vibration, less kick-back and smoother finish.

Specifications:

  • Motor: 3 HP, 220 Volt, 1 Phase, TEFC
  • Motor Amperage Rating: 13A
  • Cutter-Head RPM: 5000RPM
  • Adjustment: Parallelogram w. Crank
  • Max. Width: 8 inch
  • Max. Depth: 1/2 inch
  • Rabbeting Capacity: 1/2 inch
  • Knife System: Shear-TecII
  • 4 Sided Carbide 6 Row X 9 = 54
  • Cutter-Head Diameter: 3 inch
  • Table Dimensions: 8 x 83 inch
  • Fence Dimensions: 4-3/4 x 40 inch
  • Fence Tilt: 90 deg and 45 deg with Positive Stop
  • Table Height: 33 inch
  • Dust Port: 4 inch
  • Wheel System: Built-In
  • Weight (Net/Ship): 648/750 Lbs

 

12" Parallelogram Jointer

12 inch Laguna Parallelogram Jointer

Introducing the brand new 12 inch Laguna Parallelogram Jointer! Edge jointing is fine, but face jointing is what they all did back in the old world. Everything starts at the jointer, probably one of the most versatile machines you can own. You must have a flat surface to accomplish anything true and this is where it starts. If you want to do the job right, this is what you need.

This jointer opens up a new world that allows you to control not only your edge, but now also the face.Long beds controlled by smooth hand wheels (rather than levers) and a strong precision fence with rack and pinion adjustments sets this jointer apart, all at a very reasonable price.It is the ultimate indulgence for the demanding woodworker.

Of course a jointer in this class would not be complete without the ultimate cutterhead which is why this machine comes standard with Laguna’s exclusive ShearTec II head.TheLaguna ShearTec II is at the cutting edge of Spiral Cutterhead technology today. Deep gullets allow chips to exit fast and keep the head clean.

The inserts are made from thicker solid German carbide and set into the head on a flat surface rather than a cone design. This allows more torque to be used when tightening the inserts. All of the inserts are slightly angled to give a shear type cut with low impact and less kick-back action. The leading edge is crowned to minimize lines appearing.

Laguna ShearTec II heads are all 6 row; most competitors’ heads offer just 3 or 4 rows. There obviously are a host of benefits associated from the additional rows: More carbide inserts, longer life, less noise and vibration, less kickback and smoother finish.

Specifications:

  • Motor: 5 HP, 220 Volt, 1 Phase, TEFC
  • Motor Amperage Rating: 22A
  • Cutter-Head RPM: 5500RPM
  • Adjustment: Parallelogram with Crank
  • Max. Width: 12 inch
  • Max. Depth: 1/2 inch
  • Rabbeting Capacity: 1/2 inch
  • Knife System: Shear-TecII
  • 4 Sided Carbide 6 Row x 11 = 66
  • Cutter-Head Diameter: 4 inch
  • Table Dimensions: 12 x 87-3/4 inch
  • Fence Dimensions: 5-3/8 x 60 inch
  • Fence Tilt: 90 deg and 45 deg with Positive Stop
  • Height From Floor: 33 inch
  • Dust Port: 6 inch
  • Wheel System: Built-In
  • Weight (Net/Ship) 880/1078 Lbs.

 

MJOIN6100-0130
JOINTERS - 6 WEDGEBED SHEARTECII - 110V/ 1.5 HP/PH
Mfg. item #: MJOIN6100-0130
LAGMJOIN6100{00
$99.00 Freight Rate for Laguna and Supermax machines. Any accessory added to this order ships free - Includes FREE Residential, FREE Liftgate & Call Ahead Service1049
NEW ITEM
$1,399.00

7
MJOIN8012-0130
JOINTERS - 8 DOVETAIL SHEARTECII - 220V/ 2 HP/1PH
Mfg. item #: MJOIN8012-0130
LAGMJOIN8012{00
$99.00 Freight Rate for Laguna and Supermax machines. Any accessory added to this order ships free - Includes FREE Residential, FREE Liftgate & Call Ahead Service1049
NEW ITEM
$1,999.00

7
MJOIN8020-0130
JOINTERS - 8 PARALLELOGRAM SHEARTECII - 220V/ 3 HP/1PH
Mfg. item #: MJOIN8020-0130
LAGMJOIN8020{00
lease to own for as little as:$60 per month!
$99.00 Freight Rate for Laguna and Supermax machines. Any accessory added to this order ships free - Includes FREE Residential, FREE Liftgate & Call Ahead Service1049
NEW ITEM
$2,999.00

7
MJOIN12X86-5-1-
JOINTERS - 12 SHEARTECII - 220V/ 5 HP/1PH
Mfg. item #: MJOIN12X86-5-1-
LAGMJOIN12X8{00
lease to own for as little as:$100 per month!
$99.00 Freight Rate for Laguna and Supermax machines. Any accessory added to this order ships free - Includes FREE Residential, FREE Liftgate & Call Ahead Service1049
NEW ITEM
$4,999.00

7
Copyright © 2019 Smith-Hamilton, Inc
0.006 190530 14:58