Technical Sales 1–800–458–3687

Laguna Panelsaws

p12-5 Panelsaw p12-8 panelsaw p12-10 Panelsaw p14-10 panelsaw
p12-5 Panelsaw p12-8 Panelsaw p12-10 Panelsaw p14-10 Panelsaw

Click here for classic woodworking laguna tablesaws

Models
MPSP12-5-0135 P12|5 Panelsaw 220V 1Phase
MPSP12-8-7.5HP-3PH-0135 P12|8 Panelsaw 220V 3Phase
MPSP12-8-5HP-1PH-0135 P12|8 Panelsaw 220V 1Phase
MPSP12-10-5HP-1PH-0135 P12|10 Panelsaw 220V 1Phase
MPSP14-10-7.5HP-3-220-0148 P14|10 Panelsaw 220V 3Phase
 P12-5

P12|5 Panelsaw

The P12|5 was designed as a luxury panelsaw for the demanding pro shop. It has all the features and qualities of the bigger P12|8 but with a smaller stroke and a more compact cabinet. P12|5 features a 63 inch dumbbell sliding table design, 5HP main motor, 3/4 HP scoring and swing-away overhead guard.

The 63 inch sliding table is constructed of anodized aluminum. The dumbbell design is widely recognized as the superior choice for high-end sliders today. Ultra-smooth movement allows you to move the table effortlessly.

The European style 51 inch rip fence consists of a heavy-duty casting riding on a micro-polished solid steel bar. On the backside of the casting is a small adjustable wheel to make sideways movement a breeze. The rip fence is outfitted with a micro adjustment for fine-tuning; simply lock it in place and adjust fence incrementally.

The overhead guard comes standard with quick-change 90 deg and 45 deg guards; you can switch from one to the other in a matter of seconds. A nice detail is the swing-away function that allows you to quickly move the guard out of the way. Dust collection hookup is out of the way at the end of gantry (5 inch).

The heavy-duty anodized aluminum crosscut fence features two solid flip-stops, telescoping function (max 108 inch), 45 deg miter and is ergonomically designed to make it easier to read the tape.

Inside the P12|5 you will find heavy castings, solid gears and precision-machined trunnions mounted onto the solid steel frame. The Heavy Duty motor is equipped with soft start to minimize initial amperage draw.

The P12|5 comes standard with hold-down clamp, rip shoe and push handle.

 

Specifications:

  • Motor: 5HP Main
  • Motor: 3/4 HP Scoring
  • Volt: 220, 1 Phase, 60 Hz
  • Blade Capacity: 12 inch, 14 inch (300mm, 355mm)
  • Max Blade: 14 inch (355mm)(Minimum Height When Lowered: 1″/25mm)
  • Max Scoring Blade: 4-3/4 inch (120mm)
  • Scoring Adjusting: T-Handle Through Cast Top
  • Arbor: 30mm (Main), 20mm (Scoring)
  • Max Cutting Height 90 deg 14 inch /35mm Blade: 4-1/2 inch (155mm)
  • Max Cutting Height 90 deg 12 inch /305mm Blade: 3-1/2 inch (90mm)
  • Max Cutting Height 45 deg 14 inch /355mm Blade: 2-3/4 inch (70mm)
  • Max Cutting Height 45 deg 12 inch /305mm Blade: 2-3/8 inch (62mm)
  • Main Blade Speed: 4000 RPM
  • Scoring Blade Speed: 8000 RPM
  • Dust Collection Port Saw: 4 inch (100mm)
  • Sliding Table: 63 inch (1600mm)
  • Sliding Table Width: 14.88 inch (378mm)
  • Main Cast Table: 21-1/2 x 35-1/4 inch
  • Rip Fence: 51 inch (1300mm)
  • Rip Fence Micro Adjust: Included
  • Rip Fence Bar: 1-5/8 inch (40mm) Solid Steel Micro Polished
  • Push Handle: Included
  • Rip Shoe: Included
  • Hold Down Clamp: Included
  • 32 x 12 inch Steel Extension Table: Included
  • Crosscut Fence: Flip-Stops
  • Crosscut Fence Readout: Inch/Metric
  • Crosscut Max Collapsed: 77 inch
  • Crosscut Fence Max Extended: 140 inch
  • Table Lock Positions: 2 Tabs, 20 Notches = 40 Total
  • Shipping Dimensions: 83 x 46 x 46 inch
  • Weight (Net/Ship): 1405/1525 lbs

 

panelsaw 12 inch BLADE 102 inch SLIDER 5HP 220V 1PH 220V - 5 HP - 1 Hz

P12|8 Panelsaw

The P12|8 was designed to clear 8-ft. material using a 12 inch blade. This means that when you finish your stroke, the back end of your sheet will just have cleared the blade, causing no friction as the blade is spinning down.

The 102 inch sliding table is constructed of anodized aluminum. The dumbbell design is widely recognized as the superior choice for high-end sliders today. Ultra-smooth movement allows you to move the table effortlessly.

The European style 51 inch rip fence consists of a heavy-duty casting riding on a micro-polished solid steel bar. On the backside of the casting is a small adjustable wheel to make sideways movement a breeze. The rip fence is outfitted with a micro adjustment for fine-tuning; simply lock it in place and adjust fence incrementally.

The overhead guard comes standard with quick-change 90 deg and 45 deg guards; you can switch from one to the other in a matter of seconds. A nice detail is the swing-away function that allows you to quickly move the guard out of the way. Dust collection hookup is out of the way at the end of gantry (5 inch ).

The heavy-duty anodized aluminum crosscut fence features two solid flip-stops, telescoping function (max 108 inch ), 45 deg miter and is ergonomically designed to make it easier to read the tape.

Inside the P12|8 you will find heavy castings, solid gears and precision-machined trunnions mounted onto the solid steel frame.

The heavy-duty motor is equipped with soft start to minimize initial amperage draw.

The P12/8 comes standard with hold-down clamp, rip shoe, and push handle

Speficiations:

  • Motor: 5HP Main
  • Motor: 3/4 HP Scoring
  • Volt: 220, 1 phase, 60 Hz.
  • Blade Capacity: 12 inch, 14 inch / 300 mm, 355 mm
  • Max. Blade: 16 inch / 400 mm (minimum height when lowered: 1 inch / 25 mm)
  • Max Scoring Blade: 4-3/4 inch / 120 mm
  • Scoring Adjustment: T-Handle through Cast Top
  • Arbor: 30mm Main, 20mm Scoring
  • Max Cutting Height 90 deg 14 inch / 355mm Blade: 4-1/2 inch / 115mm
  • Max Cutting Height 90 deg 16 inch / 400mm Blade: 5-1/8 inch / 130mm
  • Max Cutting Height 45 deg 14 inch / 355mm Blade: 2-3/4 inch / 70mm
  • Max Cutting Height 45 deg 16 inch/ 400mm Blade: 3-1/2 inch / 90mm
  • Main Blade Speed: 4000 RPM
  • Scoring Blade Speed: 8000 RPM
  • Dust Collection Port Saw: 4.75 inch / 120 mm
  • Dust Collection Port Guard: 4 inch / 100 mm
  • Sliding Table: 102.36 inch / 2600 mm
  • Sliding Table Width: 14.88 inch / 378 mm
  • Main Cast Table: 21-1/2 x 35-1/4 inch
  • Rip Fence: 51 inch / 1300 mm
  • Rip Fence Micro Adjust: Included
  • Rip Fence Bar: 1-5/8 inch / 40 mm Solid Steel Micro Polished
  • Overhead Guard with Swing-Away
  • Push Handle: Included
  • Rip Shoe: Included
  • Hold Down Clamp: Included
  • 32 x 12 inch Steel Extension Table: Included
  • Crosscut Fence 2 x Flip-Stops
  • Crosscut Fence Readout: Inch/Metric
  • Crosscut Fence Max. Collapsed: 77 inch
  • Crosscut Fence Max. Extended: 140 inch
  • Table Lock Positions: 2 Tabs, 20 Notches = 40 Total
  • Ship Dimensions Body: 83 x 47 x 46 inch
  • Ship Dimensions Table: 137 x 20 x 15 inch
  • Weight (Net/Ship): 1815 / 2112 lbs

 

 12 inch BLADE 126 inch SLIDER 7.5HP 220V 3PH 220V - 7.5 HP - 3 Hz

P12|10 Panelsaw

The 126 inch sliding table is constructed of anodized aluminum. The dumbbell design is widely recognized as the superior choice for high-end sliders today. Ultra-smooth movement allows you to move the table effortlessly.

The European-style 51 inch rip fence consists of a heavy-duty casting riding on a micro polished solid steel bar. On the backside of the casting is a small adjustable wheel to make sideways movement a breeze. The rip fence is outfitted with a micro adjustment for fine-tuning; simply lock it in place and adjust fence incrementally.

The overhead guard comes standard with quick-change 90° and 45° guards; you can switch from one to the other in a matter of seconds. A nice detail is the swing-away function that allows you to quickly move the guard out of the way. Dust collection hookup is out of the way at the end of gantry (5 inch).

The heavy-duty anodized aluminum crosscut fence features two solid flip-stops, telescoping function (max 108 inch), 45 deg miter and is ergonomically designed to make it easier to read the tape.

Inside the P12|10 you will find the saw unit is moving on micro-polished solid steel rods for ultimate precision.

The heavy duty motor is equipped with soft start to minimize initial amperage draw.

The P12|10 comes standard with hold-down clamp, rip shoe and push handle

Specifications:

  • Motor: 7.5HP 3 Phase Main
  • Motor: 3/4 HP Scoring
  • Volt: 220 1 phase 60 Hz
  • Blade Capacity: 12 inch, 14 inch / 300 mm, 355 mm
  • Max. Blade: 16 inch / 400 mm (minimum height when lowered: 1 inch / 25 mm)
  • Max Scoring Blade: 4-3/4 inch / 120 mm
  • Scoring Adjustment: T-Handle through Cast Top
  • Arbor: 30mm Main, 20mm Scoring
  • Max Cutting Height 90 deg 14 inch / 355 mm Blade: 4-1/2 inch / 115 mm
  • Max Cutting Height 90 deg 16 inch / 400 mm Blade:5-1/8 inch / 130 mm
  • Max Cutting Height 45 deg 14 inch / 355 mm Blade: 2-3/4 inch / 70 mm
  • Max Cutting Height 45 deg 16 inch / 400 mm Blade: 3-1/2 inch / 90 mm
  • Main Blade Speed: 4000 RPM
  • Scoring Blade Speed: 8000 RPM
  • Dust Collection Port Saw: 4.75 inch / 120 mm
  • Dust Collection Port Guard: 4 inch / 100 mm
  • Sliding Table: 126 inch / 3200 mm
  • Sliding Table Width: 14.88 inch / 378 mm
  • Main Cast Table: 21-1/2 x 35-1/4 inch
  • Rip Fence: 51 inch / 1300 mm
  • Rip Fence Micro Adjust: Included
  • Rip Fence Bar: 1-5/8 inch / 40 mm Solid Steel Micro Polished
  • Overhead Guard with Swing-Away
  • Push Handle: Included
  • Rip Shoe: Included
  • Hold Down Clamp: Included
  • 32 x 12 inch Steel Extension Table: Included
  • Crosscut Fence 2 x Flip-Stops
  • Crosscut Fence Readout: Inch/Metric
  • Crosscut Fence Max. Collapsed: 77 inch
  • Crosscut Fence Max. Extended: 140 inch
  • Table Lock Positions: 2 Tabs, 20 Notches = 40 Total
  • Ship Dimensions Body: 83 x 47 x 46 inch
  • Ship Dimensions Table: 137 x 20 x 15 inch
  • Weight (Net/Ship): 1815 / 2112 lbs

 

 P14-10 Panelsaw

 P14-10 Panelsaw

The sliding table is constructed of anodized aluminum. The dumbbell design is widely recognized as the superior choice for high-end sliders today. Ultra-smooth movement allows you to move the table effortlessly. The European-style 51 inch rip fence consists of a heavy-duty casting riding on a micro-polished solid steel bar. On the backside of the casting is a small adjustable wheel to make sideways movement a breeze. The rip fence is outfitted with a micro-adjustment for fine-tuning; simply lock it in place and adjust the fence incrementally. The overhead guard comes standard with quick-change 90 deg and 45 deg guards; you can switch from one to the other in a matter of seconds. A nice detail is the swing-away function that allows you to quickly move the guard out of the way.

Specifications:

  • Sliding Table Capacity: 10′ 6 inch
  • Max Main Saw Blade: 14 inch
  • Max Cutting Height w/ Blade at 90 deg: 4-3/4 inch
  • Max Cutting Height w/ Blade at 45 deg: 2-3/4 inch
  • Main Motor Power: 7.5HP 220V/ 60Hz/ 3Ph
  • Main Saw Speed: 3000/4000/5000 RPM
  • Scoring Saw Blade: 120mm
  • Scoring Saw Blade Bore: 20mm
  • Scoring Blade Speed: 8000 RPM
  • Scoring Motor Power: 1HP
  • Max Rip Capacity: 51 inch
  • Manual Control For Cutting Width Adjustment w/ DRO
  • Digital Control For Saw Blade Tilting Adjustment
  • Motorized Control For Main Saw Blade Height Adjustment
  • Motorized Control For Scoring Saw Height Adjustment
  • Motorized Control For Scoring Saw +/- Direction Adjustment
  • Digital Display For Blade Tilting Angle
  • Digital Display For Main Blade Speed RPM

 

MPSP12-5-0135
LAGUNA INDUSTRIAL P12|5 PANELSAW 220V 1PHASE ** WEIGHT = 1292 LBS & MADE IN TAIWAN
Mfg. item #: MPSP12-5-0135
LAGMPSP12-5-{00
lease to own for as little as:$173 per month!
FREE SHIPPING ANYWHERE in lower 48 states21
$8,625.03

94
MPSP12-8-7.5hp-
LAGUNA INDUSTRIAL P12|8 PANELSAW 220V 3PHASE ** WEIGHT = 2200 LBS & MADE IN TAIWAN
Mfg. item #: MPSP12-8-7.5hp-
LAGMPSP12-8-{02
lease to own for as little as:$240 per month!
FREE SHIPPING ANYWHERE in lower 48 states21
$11,999.00

94
MPSP12-8-5HP-1P
LAGUNA INDUSTRIAL P12|8 PANELSAW 220V 1PHASE ** WEIGHT = 2200 LBS & MADE IN TAIWAN
Mfg. item #: MPSP12-8-5HP-1P
LAGMPSP12-8-{01
lease to own for as little as:$240 per month!
FREE SHIPPING ANYWHERE in lower 48 states21
$11,999.00

94
MPSP12-10-5HP-1
LAGUNA INDUSTRIAL P12|10 PANELSAW 220V 1PHASE ** WEIGHT = 2200 LBS & MADE IN TAIWAN
CALL 800-458-3687 X1 FOR AVAILABILITY ** FREE SHIPPING ON THIS LAGUNA EQUIPMENT
Mfg. item #: MPSP12-10-5HP-1
LAGMPSP12-10{01
lease to own for as little as:$278 per month!
FREE SHIPPING ANYWHERE in lower 48 states21
$13,999.00

94
MPSP14-10-7.5HP
LAGUNA INDUSTRIAL P14|10 PANELSAW 220V 3PHASE ** WEIGHT = 2200 LBS & MADE IN TAIWAN
CALL 800-458-3687 X1 FOR AVAILABILITY ** FREE SHIPPING ON THIS LAGUNA EQUIPMENT
Mfg. item #: MPSP14-10-7.5HP
LAGMPSP14-10{00
lease to own for as little as:$354 per month!
FREE SHIPPING ANYWHERE in lower 48 states21
NEW ITEM
$17,999.00

94
Copyright © 2022 Smith-Hamilton, Inc
0.007 221118 09:04