Laguna Planers

16 inch 4 Post Planer with ShearTec II

The New Laguna 16 inch Planer is best in class for many reasons. The ShearTec II Cutterhead is a 6 row system; most planers offer only 4 or less. This means the ShearTec II will last longer. 4 sided German carbide knives give a better finish, while deep gullets and thicker knives allow for better removal Another benefit with our planers is the noise level; customers cannot believe how ultra quiet they run! Digital Readout is included, something you usually have to pay extra for with other brands. Cast iron in/out feed extensions and a built-in wheel system comes standard.Where most planers in this range offer only 15 inch capacity and 3 HP, the Laguna stands out by having 16 inch width capacity and a powerful 5 HP motor.

The Laguna ShearTec II is at the cutting edge of Spiral Cutterhead technology today. Deep gullets allow chips to exit fast and keep the head clean. The inserts are made from thicker solid German carbide and set into the head on a flat surface rather than a cone design. This allows more torque to be used when tightening the inserts. All of the inserts are slightly angled to give a shear type cut with low impact & less kick-back action. The leading edge is crowned to minimize lines appearing.

Laguna ShearTec II heads are all 6 row; most competitors’ heads offer just 3 or 4 rows. Of course there are a host of benefits associated from the additional rows: More carbide inserts, longer life, less noise and vibration, less kick-back and a smoother finish.

Specifications:

• Motor: 5 HP 1 Phase 220 volt TEFC
• Readout: Digital with Tape Backup
• Table: 56 D X 16 inch W Incl. 2 X Cast Iron Extensions
• ShearTecII 4-sided German Solid Carbide Cutterhead
• Inserts: 6 Rows X 18 Knives = 108 Total
• 2 Feed Speeds: 16 + 20 Ft/Min
• Mechanical Adjustment of Bed
• Mechanical Adjustment of Bed Rollers
• 2 Polished Steel Rollers for Material Return
• 4 inch Dust-Hood
• In/Out-Feed Cast Extensions Included
• Capacity Min-Max: 3/16 - 6 inch
• Max Removal: 1/8 inch, 3mm
• Weight (Net/Ship): 567/668 Lbs.

20 inch 4 Post Planer w/ Shear Tech II

The New Laguna 20 inch Planer is best in class for many reasons. The ShearTecII Cutter Head is a 6 row system; most planers offer only 4 or less. This means the ShearTecII will last longer. 4 sided German carbide knives give a better finish, while deep gullets and thicker knives allow for better removal. Another benefit with our planers is the noise level ; customers cannot believe how ULTRA quiet they run!Digital readout is standard, something you usually have to pay extra for with other brands.

Extensions are standard. Built -in wheel system also standard

Specifications:

• Motor: 5 HP 1 Phase 220 volt TEFC
• Readout: Digital with Tape Backup
• Table: 56 D X 20 inch W Incl. 2 X Cast Iron Extensions
• ShearTec II 4-sided German Solid Carbide Cutterhead
• Inserts: 6 Rows X 23 Knives = 138 Total
• 2 Feed Speeds: 16 + 20 Ft/Min
• Mechanical Adjustment of Bed
• Mechanical Adjustment of Bed Rollers
• 2 Polished Steel Rollers for Material Return
• 4 inch Dust-Hood
• In/Out-Feed Cast Extensions Included
• Capacity Min-Max: 3/16 - 8 inch
• Max Removal: 1/8 inch, 3mm
• Weight (Net/Ship): 830 lbs/934 Lbs.

Industrial 25 inch Planer With 15HP 3PH

Oversized bearing housings ensure ultra-smooth, quiet performance and long life. Most thickness- planers in this class have only 2 or 4 speeds and it seems they never have the right speed for the job. The Laguna 25 inch comes standard with Electronic Variable Speed meaning you will ALWAYS have the exact speed required.

Another feature not normally found in this class is the standard PLC control which allows you to simply enter in the desired height and the bed moves automatically to that setting. You’ll never want to go back to turning a hand wheel to find your thickness (or even holding down a button for that matter!). The PLC in the Laguna Industrial 25 inch planer also has automatic backlash compensation ensuring exact thicknesses.

Of course no world class planer would be complete without our incredible ShearTec II cutter head, which boasts 6 rows of 4 sided German carbide inserts for a total of 174 knives!

Specifications:

• Motor, Cutterhead: 15HP 3 Phase, 220 Volt, 37A
• Motor, Feed: 3/4 HP, DC Electronically Variable speed
• Motor, Vertical: 3/4 HP, AC
• DRO (Digital Read Out)
• PLC Programmable Height Setting
• Push-Button Height Setting
• Manual Back-Up Height Setting
• Maximum Stock Width: 25 inch
• Maximum Stock Thickness: 9 inch
• Minimum Stock Thickness: 1/8 inch
• Minimum Stock Length: 10 inch
• Maximum Stock Removal 01-12 inch Wide: 6 mm/1/4 inch
• Maximum Stock Removal 12-25 inch Wide: 3 mm/1/8 inch
• Electronic Variable Speed 10-30 FPM.
• Table Size: 52 L x 26 inch W (including extensions)
• ShearTecII Cutterhead: 6 row 174 Insert Knives
• Cutter-head Diameter: 3-1/2 inch
• Cutter-head Speed: 4800 RPM
• Knives: 174 ShearTec II, 4-sided, Solid Carbide
• Segmented In-feed Roller: 3 inch
• Segmented Pressure Bar
• 2 Polished Out-feed Rollers: 3 inch
• Retractable Table Rollers: Adjustable
• In/Out-Feed Cast Extensions Included 10 L X 26 inch W
• Dustport: 5 inch
• CSA Components
• Weight 1500 Lbs.