OSHA requires an abrasive blasting pot to be equipped with a remote control system, which only operates with continuous hand pressure and closes immediately upon release of the control switch by the operator (29 CFR 1910.244(b)). The remote control system meets the OSHA requirement by providing a Fail to Safe configuration, which will deactivate the remote control system in the event the operator drops or loses control of the remote control switch.
A heavy-duty handle, 10 inch semi-pneumatic tires, and lifting lugs allow the abrasive blasting pot to be maneuvered quickly and easily around the work site.
|The Blastmaster 125 Remote Control System is a dual Fail to Safe configuration including a 1-1/2 inch inlet valve, 1 inch outlet valve, abrasive trap, remote control line, and a remote control switch.|
|The Blastmaster 3.5 cu. ft. M-Series Abrasive Blasting Pot steep angle, 90 degree cone bottom provides significantly improved abrasive flow versus a 60 degree dished cone.|
Blastmaster Junior Extractor Moisture SeparatorBlastmaster Junior Extractor Moisture Separator removes excess moisture, oil, and other
debris from compressed air before entering the abrasive blasting pot.
Abrasive Screen, Heavy-Duty Lid and UmbrellaThe abrasive screen, heavy-duty lid and umbrella help keep damaging debris out of the
abrasive blasting pot.
Blastmaster Abrasive Blasting HoseBlastmaster Abrasive Blasting Hose is available in standard lengths of 50 and 100 feet,
or custom lengths up to 400 feet.
Blastmaster Air HoseBlastmaster Air Hose conveys compressed air to your abrasive blasting pot and pneumatic tools.
|6.5 Cu. Ft. M-Series Abrasive Blasting Pots|
|1065203||Pneumatic Remote Control System and 1-1/2 inch Metering Valve|
|1065206||12V DC Electric Remote Control System and 1-1/2 inch Metering Valve|
|1065209||120V AC Electric Remote Control System and 1-1/2 inch Metering Valve|
|All of the above configurations are also available with a 1-1/4 inch Blastmaster Bantam Abrasive Metering Valve|
|PKA||Add a 1-1/2 inch Extractor Abrasive Blasting Pot Moisture Separator (Installed)|
|LS||Add a Loading Skid (Installed)|
|PKALS||Add a 1-1/2 inch Extractor Abrasive Blasting Pot Moisture Separator and Loading Skid (Installed)|