Technical Sales 1–800–458–3687

Miller Commercial Curbilders

Curb Formers
MC 550/650 Curb Machines MC 550/650 Curb Machines 655 curb machine
550 Curb Machine 650 Curb Machine 655 Curb Machine
MC 750 Curb Machine MC 850 Curb Machine MC 900 Curb Machine
750 Curb Machine 850 Curb Machine 900 Curb Machine
Curb and Ladscape Tools
ALL STEEL HAND ROLLER ALL STEEL HAND TAMP ALL ALUMINUM LANDSCAPE RAKE
All Steel Hand Roller All Steel Hand Tamp All Aluminum Landscape Rake

 

Click here to download Instruction Manual
Click here to download Curb Mix Info
Click here to download Choosing Auger Size Chart
Click here to download CFD for 5 inch Auger
Click here to download CFD for 6 inch Auger
Click here to download CFD for 8 inch Auger

Commercial Curbilders

PRODUCT OVERVIEW
For over fifty years the Miller MC Series Curbilders have offered unequaled performance and versatility for the placement of free- standing curb. These simple and efficient self-propelled machines operate on the extrusion principle and provide the most economical means available of constructing small to mid-sized continuous curb from either concrete or asphalt. This quick and efficient process drastically reduces the high labor costs associated with hand formed and poured curb and produces high quality, extremely dense curb at a rate of up to 15 fpm (up to 30 fpm for MC900). Miller’s exclusive interchangeable extrusion auger assemblies give each Curbilder the capacity to extrude more shapes and sizes than any machine in its class, from 3-1/2” to 18” high curb. A wide variety of options allow these machines to meet the toughest specification work.

  • 05 - Curbilder product category
  • 13 - horsepower of motor
  • HR - motor type, H for Honda, K for Kohler, second digit R for recoil, E for electric start
  • 650 - series of Curbilder
  • 06 - auger diameter
  • S - type of auger, S for solid, H for hollow
  • S - type of wheels, S for solid rubber, P for pneumatic

Miller Advantages

  • Every model will extrude concrete or asphalt
  • Four interchangeable extrusion assemblies with auger
  • diameters from 5” to 10”
  • Extrude from right or left side of the machine
  • Place curb within 1” of an obstacle
  • Extrude steel rod through the curb center
  • (optional hollow auger assembly)
  • Extrude over pins (optional form)
  • Two-piece 5” and 6” cast auger allowing four separate wear
  • surfaces for extended life
  • Easy access and removal of all extrusion components for
  • maintenance and quick clean-up
  • Nearly 2,000 curb choices with custom shapes available at no
  • additional cost

miller-designs-sample

A high percentage of extruded curbs have a cross sectional area between 33 and 55 square inches, so every Miller Curbilder is equipped with the 6” extrusion assembly as standard equipment. Assemblies of other sizes are available and can easily be retrofitted to machines in the field. Each assembly is complete and includes auger, auger shaft, auger housing, compaction tube, bearings and driven sprocket.

Machine Specifications
Models MC550 MC650 MC850 MC900
Operating Weight 668 lb. 718 lb. 918 lb. 959 lb.
Height (Steering handle down) 38 inch 38 inch 40.5 inch
Width 32.25 inch 32.25 inch 32.25 inch
Length with Form (steering handle up) 77.5 inch 77.5 inch 91.5 inch
Wheelbase 52.75 inch 52.75 inch 71 inch
Hopper Capacity 6.1 cubic feet 6.1 cubic feet 9.0 cubic feet
Standard Tire Configuration (9) 8 inch dia. x 2 inch solid rubber (9) 8 inch dia. x 2 inch solid rubber (4) 4.10 x 3.50 pneumatic front +
(3) 8 inch dia. x 2.5 inch solid rubber rear
Engines 13 HP Honda
14 HP Kohler
20.3 HP Honda 20.3 HP Honda
Engine Starting System Recoil Electric Electric Electric
Fuel Capacity 1.6 gal. 2.3 gal. 3.3 gal.
Standard Auger Configuration (2) cast 6 inch dia. x 9 inch lg. (2) cast 6 inch dia. x 9 inch lg. (3) cast 6 inch dia. x 9 inch lg.
Optional Auger Configurations (2) cast 5 inch dia. x 9 inch lg.
(1) welded 8 inch dia. x 18 inch lg.
(2) cast 5 inch dia. x 9 inch lg.
(1) welded 8 inch dia. x 18 inch lg.
(1) welded 10 inch dia. x 18 inch lg.
(3) cast 5 inch dia. x 9 inch lg.
(3) welded 8 inch dia. x 18 inch lg.
(3) welded 10 inch dia. x 18 inch lg.
Hollow Auger Shaft (to extrude rebar) Optional Optional Not available
Drive System Automatic centrifugal clutch to enclosed 8:1 gear reducer; final auger drive chain & sprocket
Extrusion process provides self-propulsion
Steering Tie rod with 40 inch steering handle
Brake Friction pad on steering handle
OTHER AVAILABLE MODELS:

MC655 Same as MC650, but with modified frame allowing extrusion under existing guardrail.
MC750 Same as MC650, but with two continuously turning auger assemblies, one mounted on the left and one on the right, allowing immediate changeover from right to left hand extrusion.

 

05 - Curbilder product category
13 - horsepower of motor
HR - motor type, H for Honda, K for Kohler, second digit R for recoil, E for electric start
650 - series of Curbilder
06 - auger diameter
S - type of auger, S for solid, H for hollow
S - type of wheels, S for solid rubber, P for pneumatic

Models and Accessories
Standard Models
05-13HR-550-06SS STANDARD MODEL -  MC550 6 inch solid auger Commercial  Curbers -  13 HP Honda recoil
05-13HE-650-06SS STANDARD MODEL - MC650 6 inch solid auger Commercial  Curbers -  13 HP Honda Elec Start
05-13HE-655-06SS STANDARD MODEL - MC655 6 inch solid auger  Commercial  Curbers -  13 HP Honda Elec Start
05-13HE-750-06SS STANDARD MODEL - MC750 twin 6 inch solid augers Commercial  Curbers -  13 HP Honda Elec Start
05-20HE-850-08SPS STANDARD MODEL - MC850 8 inch solid auger Commercial  Curbers -  20HP Honda Elec Start
05-20HE-900-06SPS STANDARD MODEL - MC900 6 inch solid auger Commercial  Curbers -  20HP Honda Elec Start
MC550 Series
05-13HR-550-05SS MC550 5 inch solid auger Commercial  Curbers -  13 HP Honda recoil
05-13HR-550-05HS MC550 5 inch hollow auger Commercial  Curbers -  13 HP Honda recoil
05-13HR-550-06HS MC550 6 inch hollow auger Commercial  Curbers -  13 HP Honda recoil
05-13HE-650-05SS MC650 5 inch solid auger Commercial  Curbers -  13 HP Honda Elec Start
05-13HE-650-05HS MC650 5 inch hollow auger Commercial  Curbers -  13 HP Honda Elec Start
MC650 Series
05-13HE-650-06HS MC650 6 inch hollow auger Commercial  Curbers -  13 HP Honda Elec Start
05-13HE-650-08SS MC650 8 inch solid auger Commercial  Curbers -  13 HP Honda Elec Start
05-13HE-650-08HS MC650 8 inch hollow auger Commercial  Curbers -  13 HP Honda Elec Start
05-13HE-655-05SS MC655 5 inch solid auger Commercial  Curbers -  13 HP Honda Elec Start
MC750 Series
05-13HE-750-05SS MC750 twin 5 inch solid augers Commercial  Curbers -  13 HP Honda Elec Start
05-13HE-750-05SS MC750 twin 5 inch hollow augers Commercial  Curbers -  13 HP Honda Elec Start
05-13HE-750-06HS MC750 twin 6 inch hollow augers Commercial  Curbers -  13 HP Honda Elec Start
MC850 Series
05-20HE-850-06SPS MC850 6 inch solid auger Commercial  Curbers -  20HP Honda Elec Start
05-20HE-850-06HPS MC850 6 inch hollow auger Commercial  Curbers -  20HP Honda Elec Start
05-20HE-850-08HPS MC850 8 inch hollow auger Commercial  Curbers -  20HP Honda Elec Start
05-20HE-850-10SPS MC850 10 inch solid auger Commercial  Curbers -  20HP Honda Elec Start
MC900 Series
05-20HE-900-06HPS MC900 6 inch hollow auger Commercial  Curbers -  20HP Honda Elec Start
05-20HE-900-08SPS MC900 8 inch solid auger Commercial  Curbers -  20HP Honda Elec Start
05-20HE-900-10SPS mc900 10 inch solid auger Commercial  Curbers -  20HP Honda Elec Start
 Optional Equipment for MC550, MC650, MC655 and MC750
20HP 20 HP Honda twin cylinder engine in lieu of 13 HP Honda (MC650 only)
14HP 14 HP Kohler engine in lieu of 13 HP Honda
PN-TIRES 4.10/3.50 pneumatic tires (6) in lieu of 8 x 2 inch solid rubber
RHOP Removable hopper side plate
SPL Single point lifting lug
AWH Additional Wheelbarrow Hopper, right or left hand (not available for MC655)
 Optional Equipment for MC850 and MC900
SPLL Single point lifting lug  - Optional Equipment for MC850 and MC900
RH Reversible hopper  - Optional Equipment for MC850 and MC900
RHSP Removable hopper side plate  - Optional Equipment for MC850 and MC900
Commercial Curb Forms
CCF5 Commercial Curb Forms for 5 inch Miller Augers
CCF6 Commercial Curb Forms for 6 inch Miller Augers
CCF8 Commercial Curb Forms for 8 inch Miller Augers
CCF10 Commercial Curb Forms for 10 inch Miller Augers
Tools and Accessories
PA-84-30 84 aluminum handle 30 inch plain edge
PA-84-30S 84 aluminum handle 30 inch plain edge (L-16 Brace)
PA-84-36 84 aluminum handle 36 inch plain edge
PA-84-36S 84 aluminum handle 36 inch plain edge (L-16 Brace)
SA-84-30 84 aluminum handle 30 inch one edge serrated
SA-84-30S 84 aluminum handle 30 inch one edge serrated (L-16 Brace)
SA-84-36 84 aluminum handle 36 inch one edge serrated
SA-84-36S 84 aluminum handle 36 inch one edge serrated (L-16 Brace)
LA-66-36 66 anodized aluminum handle 36 inch blade
LA-84-36 84 anodized aluminum handle 36 inch blade
HR-180A Hand Roller, 15 x 18 inch, 150 lb
HTS 8X8 8x8 inch Hand Tamp with steel handle
L-10-P 30 plain edge blade
L-10-S 30 serrated 1 edge blade
L-11-P 36 plain edge blade
L-11-S 36 serrated 1 edge blade
L-16 Stamped steel brace
L-7B 84 aluminum handle
L-9 Aluminum handle support tube
LR-1 36 landscape rake head
91000-14 Hand roller bearing



 

Commercial Curbers: 7 Different Commercial Curb Machine Models

For over fifty years the Miller MC Series Curbers have offered unequaled performance and versatility for the placement of freestanding curb. Curb and Gutter machine

These simple and efficient self-propelled machines operate on the extrusion principle and provide the most economical means available of constructing small to mid-sized continuous curb from either concrete or asphalt. 

This quick and efficient process drastically reduces the high labor costs associated with hand formed and poured curb and produces high quality, extremely dense curb at a rate of up to 15 fpm (up to 30 fpm for MC900). Miller’s exclusive interchangeable extrusion auger assemblies give each Curber the capacity to extrude more shapes and sizes than any machine in its class, from 3-1/2″ to 18″ high curb.

A wide variety of options allow these machines to meet the toughest specification work

Miller Advantages     

  • Every model will extrude concrete or asphalt    
  • Four interchangeable extrusion assemblies with auger diameters from 5″ to 10″    
  • Extrude from right or left side of the machine    
  • Place curb within 1″ of an obstacle    
  • Extrude steel rod through the curb center (optional hollow auger assembly)    
  • Extrude over pins (optional form)    
  • Two-piece 5″, 6″ and 8″ cast auger allowing four separate wear surfaces for extended life    
  • Easy access and removal of all extrusion components for maintenance and quick clean-up    
  • Nearly 2,000 curb choices with custom shapes available at no additional cost.
MC 550/650 Curb Machines

MC 550/650

The MC 550/650 Curb Machines are the bread and butter of all the models we make. They are very versatile curb machines that are designed to handle everything from extruding curb in a parking lot, trench curb, barn curb or curbing along a city street, county road or highway. The only difference between the 2 models is the 550 has a 13 HP Honda recoil start engine and the 650 has a 13 HP Honda electric start engine.

655 curb machine

MC 655 

This machine has an auger housing that is offset by 12″ to allow the MC 655 Curb Machine to extrude curb under an existing guardrail.

mc 655 offset

MC 750 Curb Machine

MC 750 

The MC 750 Curb Machine has an auger housing on both the right and left side and is designed for the customer who wants to be able to switch from a left hand extrusion to right hand extrusion quickly while at the job-site. Keep in mind for this curb machine you will need 2 curb forms (one for the right and one for the left) if the curb is asymmetrical.

MC 850 Curb Machine

MC 850 

This machine is designed for the customer who has large concrete curbs ( typically taller than 13″) they need to extrude. The MC 850 Curb Machine has a tubular frame, a 20 HP 2 Cylinder Honda Engine, a heavy duty clutch, 2.5″ diameter wheels, heavy duty forks, heavy duty auger housing and a heavy duty motor mount.

MC 900 Curb Machine

MC 900 

The MC 900 Curb Machine is designed for the customer who has miles and miles of roadway curbing projects or has very large (typically 13″ or taller) concrete curbs they want to extrude With 3 sections of augers (all other models only have 2) in it, the 900 is the longest and fastest machine we make, making it ideal for miles and miles of roadway curbing projects.

Curb and Gutter Machine

Curb and Gutter Machine 

This machine is designed to extrude either a 18″ or 24″ curb and gutter. This machine is built with 2 auger housings next to each other. If you would like to do a 24″ curb and gutter (CFD-1887), the machine is equipped with a 2-8″ auger housings. If you would like to do a 18″ curb and gutter (CFD-1886) the machine is equipped with 1-8” auger housing and 1-6″ auger housing. This machine is the same length as our MC 900, but is 56.25″ in width. This machine requires a graded, compacted base that is at least 56.25″ in width. Either machine comes with vibration and 2 outrigger arms to provide stability. Please note, this machine does not have any capabilities to change the grade. Any imperfection in the grade will result in the curb having the same imperfections.

 

Curb Mix Information 

BECAUSE AVAILABLE MIX AND JOB CONDITIONS WILL VARY FROM ONE AREA TO ANOTHER, THE FOLLOWING CONCRETE AND ASPHALT MIX SPECIFICATIONS CAN BE USED AS GUIDES FROM WHICH TO DETERMINE EXACT MIX REQUIREMENTS:

Aggregate/Sand Information:

The size of stone and the amount of stone in the mix is very important. It is the stone that the auger pushes. A mix that has stone of a large enough size and quantity, will move through the Curber easier and quicker than a mix that does not. A mix with the proper size and quantity of stone puts less stress on the drive system and the wear components. Recommended minimum size of stone is 3/8 inch. The larger the curb size, the larger the stone should be and the more stone there should be. Maximum stone size is 3/4 inch.

The larger the stone and the more stone there is in the mix, the more finish work may be required. But, the larger the stone and the more stone there is in the mix, the easier and faster the mix will move through the Curber. The easier the mix moves through the Curber, the longer the wear life of the wear components. As the content of stone is increased the content of sand should be equally decreased. Typically a blend of Sand 60 percent and Stone 40 percent is a good starting point. A mix that has stone of too small a size and quantity, and or a high sand content, WILL PACK rather than move through the Curber. With this kind of mix the auger will spin many more times to move the mix. This extra spinning will cause excessive wear to all of the wear components. This kind of mix can wear out an auger, compaction tube, or curb form within 1500 to 2000 lineal feet of curb. This kind of mix will also cause the Curber to move very slow or not at all.

Minimum stone size 3/8″ Maximum stone size 3/4″
Minimum stone size 3/8 inch Maximum stone size 3/4 inch

Recommended Mix Specifications:

CONCRETE CURB 
For one cubic yard of concrete:

  • 0 inch to 1 inch slump
  • Cement: 660# (7 sacks)
  • Sand: 1,600 #, 5 percent moisture
  • Aggregate: 1,400 #, 3/8 inch
  • Water: Approximately 15 gallons 

Keep loads to 3 yards when possible. Water content varies according to materials and moisture content. Larger loads and higher air temperatures may require more water to maintain slump. Add water at job site only. Work materials to dry side. Retardant should be used at the manufacturers recommended minimum amount. This amount may be adjusted based on local conditions. Air entrainment should be added at approximately 5 percent. This amount may be adjusted based on local conditions.

ASPHALT CURB asphaltpour
PRODUCT WEIGHT PER TON PERCENTAGE
3/8 inch Stone 590 29.50 percent
Washed Sand 1250 62.50 percent
Liquid Asphalt 160 8 percent

Aggregate should be thoroughly washed and dried. Virgin mix is recommended. Liquid asphalt content by weight for virgin mix should be 8 percent. If using recycled mix and the curb does not stand the liquid asphalt content will need to be raised. Recycled mix usually has too many foreign substances in it and it usually does not have enough liquid asphalt in it. The liquid asphalt content may also have to be raised if the mix has slag, unwashed aggregate, or other absorptive materials in it. Working temperature – 200 to 270 degrees Fahrenheit.

USE THE FOLLOWING CALCULATIONS TO HELP DETERMINE THE QUANTITY OF MIX REQUIRED FOR ANY GIVEN CURB FORM:

ASPHALT: 

  • 1,920 ÷ cross sectional area of the curb form = lineal feet per ton
  • Cross sectional area of the curb (in square inches)

CONCRETE: 

  • 3,888 ÷ cross sectional area of the curb form = lineal feet per ton
  • Cross sectional area of the curb (in square inches)

NOTE: 

  1. See Choosing the Appropriate Auger Size info sheet to determine the square inch area of the curb form.
  2. Refer to Curb Form Design Sheets for Curb Shapes and Data.

 

Choosing the Appropriate Auger Size 

Miller Curbers can be equipped with one of four (4) different extrusion auger diameters.

These diameters are 5 inch, 6 inch, 8 inch and 10 inch. 

cfd-auger-siz-5       cast-auger

Auger assemblies are interchangeable between all Miller Curber models with the exception of the 10 inch diameter assembly which is only available on the higher horsepower models Mc850 and MC900.

Each of these auger assemblies works best with a particular range of curb sizes, measured in cross sectional area. The relationship between the cross sectional area of the curb and auger size is critical and must be given careful consideration when matching a particular curb with the correct auger assembly.

IMPROPER SIZING CAN CAUSE EXCESSIVE COMPONENT WEAR, REDUCED LIFE, POOR PERFORMANCE OR COMPLETE FAILURE TO OPERATE.

The following table is a general guide to choose the correct auger assembly for your application. Always consult the factory for curb form and auger size recommendations. Some curb shapes may require deviation from this chart.

Because most extruded curb is between 33 and 55 square inches in cross sectional area 90 percent of all machines are equipped with the standard 6 inch diameter auger.

Auger
Diameter
Minimum
Area
Maximum
Area
Minimum
Height
Maximum
Height
Minimum
Width
Maximum
Width
5 inch 18 32 3 1/2 inch 6 inch 5 inch 9 inch
6 inch 33 55 4 inch 10 inch 6 inch 14 inch
8 inch 56 119 6 inch 18 inch 8 inch 18 inch
10 inch 120 220 8 inch 18 inch 10 inch 18 inch

 

The most common mistake when sizing forms and augers is choosing a curb form which is too small for a particular auger size.

 For example, a curb shape that is a simple rectangle 6 inch wide x 4 inch high would have a cross sectional area of 24 square inches. This puts it clearly in the 5 inch diameter auger range.

proper-curb

Attempting to do this shape with a 6 inch auger would result in a number of problems. The amount of material discharged by the 6 inch auger into the form would be so great in relation to the cross sectional area of the curb that the machine would not be able to discharge, or extrude, the material fast enough. In effect, the mold becomes a severe bottleneck. As a result, excessive pressure would be created in the form. When the density of the material in the form reached the point where it could be compacted no further the excessive pressure in the form would cause the machine to actually lift, allowing material to squeeze out from under all sides of the form. This would reduce the pressure in the form but not produce an acceptable curb. Excessive pressure may also be transmitted back through the drive train causing repeated disengagement of the safety torque arm and/or shear bolt breakage. To remedy this problem, auger diameter must be reduced or curb area increased.

The second most common mistake when sizing forms and augers is choosing a form that is too large for a particular auger size. Under sizing the auger will not cause problems as severe as over sizing but will affect machine performance. Curb density and finish may be adversely affected and extrusion speed will be reduced. It is possible to add 5-10 percent to the recommended upper limit for any given auger size and still extrude satisfactorily. In the most severe case of an undersized auger the machine may discharge enough material into the form to propel itself, but inadequate density may result in a loose curb with open finish and surface voids that may not stand. Always consult the factory for recommendations on proper auger size and curb form choices.

Auger assemblies can be provided as either hollow, allowing 3/8 inch diameter reinforcing rod to be fed through the hollow auger shaft and placed in the finished curb, or as solid. The primary difference in these systems is that the in the hollow the augers are installed on a tubular shaft that is 1-1/4 inch OD by 3/4 inch ID allowing the reinforcing rod to pass through. The solid system uses a 1-1/4 inch diameter solid shaft.

The auger assembly can be placed on either the right or left side of the machine. The machine’s right and left are determined by standing at the end of the machine where the curb form is attached and looking at the open end of the form. From this perspective, if the form and auger assembly are on the left then this would be considered left hand extrusion. Unless otherwise specified at the time of ordering all machines

auger-considerations

Sample Curb Forms for Miller Curbers Equipped with 5 inch Auger Assembly

CFD for 5″ AugerCFD for 5″ Auger

Sample Curb Forms for Miller Curbers Equipped with 6 inch Auger Assembly

CFD for 6in Auger

CFD for 6″ AugerCFD for 6″ AugerCFD for 6″ Auger

Sample Curb Forms for Miller Curbers Equipped with 8 inch Auger Assembly

CFD for 8″ Auger

These different options for your Miller Curber Commercial Curbilder are available.

Your Choice of Hopper: 

Included in the purchase of your machine you get to select one of the 2 hopper configurations. The machines are built so they can extrude a curb on either the LEFT or RIGHT side of the machine.

extrusion-left extrusion-right
Left Side Extrusion Right Side Extrusion

If you would like to extrude on either side, then you would need the reversible hopper.

If you only plan to Extrude on the LEFT hand side (Right and Left is determined by watching the machine work away from you). You could select the wheelbarrow hopper. This hopper can hold more material and has a larger cut out so you can easily dump a load of material into the hopper with a wheelbarrow.

With either hopper choice you could have an optional removable hopper side plate. This plate pins into one side of the hopper and when it is in all 4 sides of the hopper are the same size. Some customers like this when they load from a cement truck because it reduces the amount of mix that can get spilled from the hopper.

wbhopper sidepanel
Wheelbarrow Hopper Removable Side Plate
hookforcurber auger-considerations
(Rebar inserted into Hollow Auger Shaft)
Lifting Lug  This is a single point that you can lift the machine from Hollow Auger  This will allow you to pass rebar from the machine into your curb. If you would like a hollow augers instead of the standard solid auger
cast-compaction-tube

Cast Compaction Tube

This compaction tube is made from the same material as the augers. So it’s a white iron compaction tube. This compaction tube will last 15 times as long as a steel compaction tube that comes with the machine. If you would like the cast compaction tube
Rear Swivel Wheel

Rear Swivel Wheel

This option is designed so that if you are curbing back to a solid object, like a building, that you can get the machine as close to the building as you can before you get the machine off the curb. In the past guys would lift the machine off the curb. This option allows you to raise the machine up, rotate the wheels and push the machine off the curb
Vibration Kit

Vibration Kit

This can be added to any machine to assist in getting concrete into the augers to keep the augers full, please consult us to make sure this option will work in your application and machine.
Hydraulic Breaking System

Hydraulic Breaking System

The hydraulic braking system is activated with a motorcycle type hand lever. It also features a locking mechanism that serves as a parking brake. When the lever is activated, hydraulic fluid flows to two calipers each located on the front forks. Brake pads in the calipers apply friction to each 3/16” thick x 7” diameter disks which are directly attached to the axles thus braking all four front wheels. The primary use of the brake is to prevent the curb extruder from rolling when extruding down hill. Currently available with machines with solid wheels
Pneumatic Tires: if you would like pneumatic tires in lieu of solid tires

 

Limited Warranty for Equipment

The Miller Curber Company guarantees to the original purchaser the frame and metal components of the equipment manufactured by Miller Curber Company to be free from defects in material and workmanship for six (6) years from date of original shipment from Miller Curber Company. This warranty excludes all equipment, parts, components and accessories not manufactured by Miller, including, but not limited to: engines, transmissions, pumps, cylinders, batteries, tires, bearings, belts, etc. Such products are warranted by their respective manufacturer, whose warranty will be the governing warranty for that particular product. Individual manufacturers’ warranties are available upon request.

This is a LIMITED WARRANTY. This warranty is expressly in lieu of all other warranties, express or implied, including the warranties of merchantability and fitness for use and all other obligations or liabilities on our part. And we neither assume nor authorize any other to assume for us, any other liability in connection with the sale of any Miller Curber Company products. There are no warranties which extend beyond the description on the face hereof. To validate this warranty for equipment the registration form which accompanies each machine must be completed and returned to the factory by the customer within two (4) weeks after the purchase of the machine.

Emission Control System Warranty for Emissions Equipment Installed on Miller Curber Models MC-850/900

The Miller Curber Company guarantees to the original purchaser of all of the emissions equipment installed on Miller Curber Model MC850/900 to be free from defects in material and workmanship for two (2) years from the date of original shipment from Miller Curber Co. Emission equipment includes: 1) welded steel fuel tank, 2) sealing, tethered fuel cap, c) low permeation fuel supply hose, and d) low permeation fuel vapor hose. Exclusions: Failures other than those resulting from defects in material and workmanship are not covered by this warranty. This warranty does not extend to emission control systems or parts which are affected or damaged by owner abuse, neglect, improper maintenance, misuse, misfueling, improper storage, accident and/or collision, the incorporation of, or any use of, any add-on or modified parts, unsuitable attachments, or the unauthorized alteration of any part.

Limited Warranty for Hand Tools

The Miller Curber Company guarantees to the original purchaser the hand tools manufactured by Miller Curber Company to be free from defects in material and workmanship for ninety days from the date of purchase. The obligation of the Miller Curber Company under this warranty shall be limited to the repair or replacement of any product or parts thereof which may prove to be defective in material or workmanship, to the satisfaction of Miller upon inspection, under normal use and service. This warranty shall not apply to any product or part of said product, which in the judgment of the Miller Curber Company, was not operated, or maintained correctly, in every respect, as outlined in the manual or information which accompanies each product. This warranty does not apply to failure occurring as a result of abuse, misuse, negligent repairs, corrosion, erosion, normal wear and tear, alterations or modifications made to the product without the express written consent of the Miller Curber Company.


The total liability of Miller Curber Company with respect to their sale of products or services furnished hereunder, in connection with the performance or breach thereof, or from the sale, delivery, installation, repair or technical direction covered by or furnished under the sale, whether based on contract, warranty, negligence, indemnity, strict liability, or otherwise shall not exceed the purchase price of the unit of product upon which such liability is based.

Since Miller Curber Company has no means of controlling the final use of its products by the consumer or user, it is the responsibility of the immediate seller(s) to inform the user of each product of the purposes and conditions for which the product may be fit and suitable, including the precautionary measures which must be taken in order to insure the safety of the user and of third persons and property.

Both the seller and the manufacturer shall be held free and harmless from any liability from injury to any person(s), loss or damage to any property, direct, incidental, consequential, or otherwise, resulting from the accidental, negligent, altered, abused or misused operation of the machine. Before using, the user shall determine the suitability of the product for the intended use, and the user assumes all risk and liability what-so-ever in connection with such use. Any product built to customer design shall be warranted as above only with respect to materials and workmanship. The Miller Curber Company shall be held harmless from any injury or damage resulting from such custom design, or functional dissatisfaction of such product. Miller Curber Company reserves the right to modify, alter and improve any part or parts without incurring any obligation to replace any part or parts previously sold without such modified, altered or improved part or parts. Authorization from the Miller Curber Company is required prior to any warranty work being performed. Any warranty work authorized by the Miller Curber Company will be performed only at the location(s) authorized and by the person(s) authorized. When warranty repairs require specific procedures, repairs will be performed as instructed by the Miller Curber Company. Authorization from the Miller Curber Company is required prior to any products or parts of products being returned to the factory for warranty consideration.

All returns must be shipped prepaid and are subject to inspection.

This warranty does not obligate the Miller Curber Company to bear the cost of service, labor, mileage, delivery charges, or other expenses that have not been previously authorized by the Miller Curber Company. In the event that new parts are shipped to a dealer/user to replace alleged defective parts, prior to Miller Curber Company receiving the alleged defective parts, and prior to Miller Curber Company determining that parts are defective and covered under warranty, the new parts will be shipped and invoiced as a normal parts order. The dealer/user invoiced under these conditions is liable for payment of the parts invoice. At such time that the returned parts are determined to be defective, and covered under warranty, a credit to account will be issued for the warranted amount.

ALL STEEL HAND ROLLER

ALL STEEL HAND ROLLER

  • 14 inch O.D. x 15 inch long drum with beveled edges
  • Drum is ball bearing mounted on a 1 inch cold-rolled steel shaft
  • 1 inch diameter steel handle counter-weighted to automatically return to an upright position
  • Handle mounted on one side only to allow rolling close to a building or obstacle
ALL STEEL HAND TAMP

ALL STEEL HAND TAMP

  • Steel tamp head is more durable than cast iron tamp head
ALL ALUMINUM LANDSCAPE RAKE

ALL ALUMINUM LANDSCAPE RAKE

  • Blades are aluminum and available in 36 inch
  • Handles are 66 and 82 inch long and 1-5/32 inch diameter anodized (non-oxidizing) aluminum and are reinforced at all stress points with hardwood dowels
  • Two L-9 aluminum tubular blade supports are standard

 

05-13HR-550-06S
** STANDARD MODEL** MC550 6 SOLID AUGER COMMERCIAL CURBERS - 13 HP HONDA RECOIL ** SHIPPING WGT = 720 LBS - MC550 SERIES (9 SOLID RUBBER WHEELS, RECOIL START, 5 OR 6 AUGER, WHEELBARROW HOPPER)
MACHINE PRICE DOES NOT INCLUDE CURB FORM OR TROWELS
Mfg. item #: 05-13HR-550-06S
MIL05-13HR-5{01
lease to own for as little as:$195 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.11
$9,770.88

301
05-13HE-650-06S
** STANDARD MODEL** MC650 6 SOLID AUGER COMMERCIAL CURBERS - 13 HP HONDA ELEC START ** SHIPPING WGT = 780 LBS - MC650 SERIES (9 SOLID RUBBER WHEELS, ELECTRIC START, 5, 6, OR 8 AUGER, WHEELBARROW HOPPER)
MACHINE PRICE DOES NOT INCLUDE CURB FORM OR TROWELS
Mfg. item #: 05-13HE-650-06S
MIL05-13HE-6{07
lease to own for as little as:$214 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.11
$10,721.28

301
05-13HE-655-06S
** STANDARD MODEL** MC655 6 SOLID AUGER COMMERCIAL CURBERS - 13 HP HONDA ELEC START ** SHIPPING WGT = 815 LBS MC655 SERIES FOR EXTRUSION UNDER EXISTING GUARDRAIL (9 SOLID RUBBER WHEELS, ELECTRIC START, 6 DIAMETER SOLID AUGER, 12 EXTENDED FRAME AND HOPPER.
MACHINE PRICE DOES NOT INCLUDE CURB FORM OR TROWELS
Mfg. item #: 05-13HE-655-06S
MIL05-13HE-6{12
lease to own for as little as:$266 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.11
$13,306.56

301
05-13HE-750-06S
** STANDARD MODEL** MC750 TWIN 6 SOLID AUGERS COMMERCIAL CURBERS - 13 HP HONDA ELEC START ** SHIPPING WGT = 940 LBS MC750 SERIES (9 SOLID RUBBER WHEELS, TWIN AUGERS FOR QUICK CHANGE FROM LEFT TO RIGHT EXTRUSION, ELECTRIC START, 5, 6 OR 8 AUGER, REVERSIBLE HOPPER)
MACHINE PRICE DOES NOT INCLUDE CURB FORM OR TROWELS
Mfg. item #: 05-13HE-750-06S
MIL05-13HE-7{03
lease to own for as little as:$249 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.11
$12,440.64

301
05-20HE-850-08S
MC850 8 SOLID AUGER COMMERCIAL CURBERS - 20HP HONDA ELEC START ** SHIPPING WGT = 895 LBS MC655 SERIES FOR EXTRUSION UNDER EXISTING GUARDRAIL (9 SOLID RUBBER WHEELS, ELECTRIC START, 6 DIAMETER SOLID AUGER, 12 EXTENDED FRAME AND HOPPER.
MACHINE PRICE DOES NOT INCLUDE CURB FORM OR TROWELS
Mfg. item #: 05-20HE-850-08S
MIL05-20HE-8{0H
lease to own for as little as:$374 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.11
$18,681.60

301
05-20HE-900-06S
** STANDARD MODEL** MC900 6 SOLID AUGER COMMERCIAL CURBERS - 20HP HONDA ELEC ST. ** SHIPPING WGT = 1065 LBS MC900 SERIES (TRIPLE AUGER ASSEMBLY, 4 FRONT PNEUMATIC TIRES,10/3.50-4 + 3 SOLID RUBBER REAR WHEELS, ELECTRIC START, 5, 6, 8 OR 10 DIAMETER SOLID AUGER OR 5, 6 HOLLOW AUGER)
MACHINE PRICE DOES NOT INCLUDE CURB FORM OR TROWELS
Mfg. item #: 05-20HE-900-06S
MIL05-20HE-9{01
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.11
$1,724.16

301
05-13HR-550-05S
MC550 5 SOLID AUGER COMMERCIAL CURBERS - 13 HP HONDA RECOIL ** SHIPPING WGT = 700 LBS - MC550 SERIES (9 SOLID RUBBER WHEELS, RECOIL START, 5 OR 6 AUGER, WHEELBARROW HOPPER)
MACHINE PRICE DOES NOT INCLUDE CURB FORM OR TROWELS
Mfg. item #: 05-13HR-550-05S
MIL05-13HR-5{02
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.11
Call for Price

301
05-13HR-550-05H
MC550 5 HOLLOW AUGER COMMERCIAL CURBERS - 13 HP HONDA RECOIL ** SHIPPING WGT = 705 LBS - MC550 SERIES (9 SOLID RUBBER WHEELS, RECOIL START, 5 OR 6 AUGER, WHEELBARROW HOPPER)
MACHINE PRICE DOES NOT INCLUDE CURB FORM OR TROWELS
Mfg. item #: 05-13HR-550-05H
MIL05-13HR-5{06
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.11
Call for Price

301
05-13HR-550-06H
MC550 6 HOLLOW AUGER COMMERCIAL CURBERS - 13 HP HONDA RECOIL ** SHIPPING WGT = 725 LBS - MC550 SERIES (9 SOLID RUBBER WHEELS, RECOIL START, 5 OR 6 AUGER, WHEELBARROW HOPPER)
MACHINE PRICE DOES NOT INCLUDE CURB FORM OR TROWELS
Mfg. item #: 05-13HR-550-06H
MIL05-13HR-5{00
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.11
Call for Price

301
05-13HE-650-05S
MC650 5 SOLID AUGER COMMERCIAL CURBERS - 13 HP HONDA ELEC START ** SHIPPING WGT = 760 LBS - MC650 SERIES (9 SOLID RUBBER WHEELS, ELECTRIC START, 5, 6, OR 8 AUGER, WHEELBARROW HOPPER)
MACHINE PRICE DOES NOT INCLUDE CURB FORM OR TROWELS
Mfg. item #: 05-13HE-650-05S
MIL05-13HE-6{03
lease to own for as little as:$231 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.11
$11,558.40

301
05-13HE-650-05H
MC650 5 HOLLOW AUGER COMMERCIAL CURBERS - 13 HP HONDA ELEC START ** SHIPPING WGT = 765 LBS - MC650 SERIES (9 SOLID RUBBER WHEELS, ELECTRIC START, 5, 6, OR 8 AUGER, WHEELBARROW HOPPER)
MACHINE PRICE DOES NOT INCLUDE CURB FORM OR TROWELS
Mfg. item #: 05-13HE-650-05H
MIL05-13HE-6{01
lease to own for as little as:$237 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.11
$11,867.52

301
05-13HE-650-06H
MC650 6 HOLLOW AUGER COMMERCIAL CURBERS - 13 HP HONDA ELEC START ** SHIPPING WGT = 785 LBS - MC650 SERIES (9 SOLID RUBBER WHEELS, ELECTRIC START, 5, 6, OR 8 AUGER, WHEELBARROW HOPPER)
MACHINE PRICE DOES NOT INCLUDE CURB FORM OR TROWELS
Mfg. item #: 05-13HE-650-06H
MIL05-13HE-6{05
lease to own for as little as:$220 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.11
$11,009.28

301
05-13HE-650-08S
MC650 8 SOLID AUGER COMMERCIAL CURBERS - 13 HP HONDA ELEC START ** SHIPPING WGT = 820 LBS - MC650 SERIES (9 SOLID RUBBER WHEELS, ELECTRIC START, 5, 6, OR 8 AUGER, WHEELBARROW HOPPER)
MACHINE PRICE DOES NOT INCLUDE CURB FORM OR TROWELS
Mfg. item #: 05-13HE-650-08S
MIL05-13HE-6{11
lease to own for as little as:$259 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.11
$12,957.12

301
05-13HE-650-08H
MC650 8 HOLLOW AUGER COMMERCIAL CURBERS - 13 HP HONDA ELEC START ** SHIPPING WGT = 825 LBS - MC650 SERIES (9 SOLID RUBBER WHEELS, ELECTRIC START, 5, 6, OR 8 AUGER, WHEELBARROW HOPPER)
MACHINE PRICE DOES NOT INCLUDE CURB FORM OR TROWELS
Mfg. item #: 05-13HE-650-08H
MIL05-13HE-6{09
lease to own for as little as:$265 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.11
$13,256.64

301
05-13HE-655-05S
MC655 5 SOLID AUGER COMMERCIAL CURBERS - 13 HP HONDA ELEC START ** SHIPPING WGT = 800 LBS MC655 SERIES FOR EXTRUSION UNDER EXISTING GUARDRAIL (9 SOLID RUBBER WHEELS, ELECTRIC START, 6 DIAMETER SOLID AUGER, 12 EXTENDED FRAME AND HOPPER.
MACHINE PRICE DOES NOT INCLUDE CURB FORM OR TROWELS
Mfg. item #: 05-13HE-655-05S
MIL05-13HE-6{18
lease to own for as little as:$298 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.11
$14,880.96

301
05-13HE-750-05S
MC750 TWIN 5 HOLLOW AUGERS COMMERCIAL CURBERS - 13 HP HONDA ELEC START ** SHIPPING WGT = 905 LBS MC750 SERIES (9 SOLID RUBBER WHEELS, TWIN AUGERS FOR QUICK CHANGE FROM LEFT TO RIGHT EXTRUSION, ELECTRIC START, 5, 6 OR 8 AUGER, REVERSIBLE HOPPER)
MACHINE PRICE DOES NOT INCLUDE CURB FORM OR TROWELS
Mfg. item #: 05-13HE-750-05S
MIL05-13HE-7{01
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.11
Call for Price

301
05-13HE-750-06H
MC750 TWIN 6 HOLLOW AUGERS COMMERCIAL CURBERS - 13 HP HONDA ELEC START ** SHIPPING WGT = 945 LBS MC750 SERIES (9 SOLID RUBBER WHEELS, TWIN AUGERS FOR QUICK CHANGE FROM LEFT TO RIGHT EXTRUSION, ELECTRIC START, 5, 6 OR 8 AUGER, REVERSIBLE HOPPER)
MACHINE PRICE DOES NOT INCLUDE CURB FORM OR TROWELS
Mfg. item #: 05-13HE-750-06H
MIL05-13HE-7{02
lease to own for as little as:$261 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.11
$13,039.68

301
05-20HE-850-06S
** STANDARD MODEL** MC850 6 SOLID AUGER COMMERCIAL CURBERS - 20HP HONDA ELEC START ** SHIPPING WGT = 850 LBS MC655 SERIES FOR EXTRUSION UNDER EXISTING GUARDRAIL (9 SOLID RUBBER WHEELS, ELECTRIC START, 6 DIAMETER SOLID AUGER, 12 EXTENDED FRAME AND HOPPER.
MACHINE PRICE DOES NOT INCLUDE CURB FORM OR TROWELS
Mfg. item #: 05-20HE-850-06S
MIL05-20HE-8{0A
lease to own for as little as:$332 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.11
$16,594.56

301
05-20HE-850-06H
MC850 6 HOLLOW AUGER COMMERCIAL CURBERS - 20HP HONDA ELEC START ** SHIPPING WGT = 855 LBS MC655 SERIES FOR EXTRUSION UNDER EXISTING GUARDRAIL (9 SOLID RUBBER WHEELS, ELECTRIC START, 6 DIAMETER SOLID AUGER, 12 EXTENDED FRAME AND HOPPER.
MACHINE PRICE DOES NOT INCLUDE CURB FORM OR TROWELS
Mfg. item #: 05-20HE-850-06H
MIL05-20HE-8{09
lease to own for as little as:$338 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.11
$16,893.12

301
05-20HE-850-08H
MC850 8 HOLLOW AUGER COMMERCIAL CURBERS - 20HP HONDA ELEC START ** SHIPPING WGT = 900 LBS MC655 SERIES FOR EXTRUSION UNDER EXISTING GUARDRAIL (9 SOLID RUBBER WHEELS, ELECTRIC START, 6 DIAMETER SOLID AUGER, 12 EXTENDED FRAME AND HOPPER.
MACHINE PRICE DOES NOT INCLUDE CURB FORM OR TROWELS
Mfg. item #: 05-20HE-850-08H
MIL05-20HE-8{0B
lease to own for as little as:$380 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.11
$18,980.16

301
05-20HE-850-10S
MC850 10 SOLID AUGER COMMERCIAL CURBERS - 20HP HONDA ELEC START ** SHIPPING WGT = 945 LBS MC655 SERIES FOR EXTRUSION UNDER EXISTING GUARDRAIL (9 SOLID RUBBER WHEELS, ELECTRIC START, 6 DIAMETER SOLID AUGER, 12 EXTENDED FRAME AND HOPPER.
MACHINE PRICE DOES NOT INCLUDE CURB FORM OR TROWELS
Mfg. item #: 05-20HE-850-10S
MIL05-20HE-8{0K
lease to own for as little as:$388 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.11
$19,399.68

301
05-20HE-900-06H
MC900 6 HOLLOW AUGER COMMERCIAL CURBERS - 20HP HONDA ELEC ST. ** SHIPPING WGT = 1070 LBS MC900 SERIES (TRIPLE AUGER ASSEMBLY, 4 FRONT PNEUMATIC TIRES,10/3.50-4 + 3 SOLID RUBBER REAR WHEELS, ELECTRIC START, 5, 6, 8 OR 10 DIAMETER SOLID AUGER OR 5, 6 HOLLOW AUGER)
MACHINE PRICE DOES NOT INCLUDE CURB FORM OR TROWELS
Mfg. item #: 05-20HE-900-06H
MIL05-20HE-9{00
lease to own for as little as:$374 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.11
$18,699.84

301
05-20HE-900-08S
MC900 8 SOLID AUGER COMMERCIAL CURBERS - 20HP HONDA ELEC ST. ** SHIPPING WGT = 1105 LBS MC900 SERIES (TRIPLE AUGER ASSEMBLY, 4 FRONT PNEUMATIC TIRES,10/3.50-4 + 3 SOLID RUBBER REAR WHEELS, ELECTRIC START, 5, 6, 8 OR 10 DIAMETER SOLID AUGER OR 5, 6 HOLLOW AUGER)
MACHINE PRICE DOES NOT INCLUDE CURB FORM OR TROWELS
Mfg. item #: 05-20HE-900-08S
MIL05-20HE-9{03
lease to own for as little as:$399 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.11
$19,928.64

301
05-20HE-900-10S
MC900 10 SOLID AUGER COMMERCIAL CURBERS - 20HP HONDA ELEC ST. ** SHIPPING WGT = 1155 LBS MC900 SERIES (TRIPLE AUGER ASSEMBLY, 4 FRONT PNEUMATIC TIRES,10/3.50-4 + 3 SOLID RUBBER REAR WHEELS, ELECTRIC START, 5, 6, 8 OR 10 DIAMETER SOLID AUGER OR 5, 6 HOLLOW AUGER)
MACHINE PRICE DOES NOT INCLUDE CURB FORM OR TROWELS
Mfg. item #: 05-20HE-900-10S
MIL05-20HE-9{04
lease to own for as little as:$405 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.11
$20,238.72

301
20HP
20 HP HONDA TWIN CYLINDER ENGINE IN LIEU OF 13 HP HONDA (MC650 ONLY) **OPTIONAL EQUIPMENT FOR MC550, MC650, MC655 AND MC750
Mfg. item #: 20HP
MIL20HP
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$2,221.00

301
14HP
14 HP KOHLER ENGINE IN LIEU OF 13 HP HONDA **OPTIONAL EQUIPMENT FOR MC550, MC650, MC655 AND MC750
Mfg. item #: 14HP
MIL14HP
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
Call for Price

301
PN-TIRES
4.10/3.50 PNEUMATIC TIRES (6) IN LIEU OF 8 X 2 SOLID RUBBER **OPTIONAL EQUIPMENT FOR MC550, MC650, MC655 AND MC750
Mfg. item #: PN-TIRES
MILPN-TIRES
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$369.00

301
RHOP
REMOVABLE HOPPER SIDE PLATE **OPTIONAL EQUIPMENT FOR MC550, MC650, MC655 AND MC750
Mfg. item #: RHOP
MILRHOP
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$163.00

301
SPL
SINGLE POINT LIFTING LUG **OPTIONAL EQUIPMENT FOR MC550, MC650, MC655 AND MC750
Mfg. item #: SPL
MILSPL
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$114.00

301
AWH
ADDITIONAL WHEELBARROW HOPPER, RIGHT OR LEFT HAND (NOT AVAILABLE FOR MC655) **OPTIONAL EQUIPMENT FOR MC550, MC650, MC655 AND MC750
Mfg. item #: AWH
MILAWH
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
Call for Price

301
SPLL
SINGLE POINT LIFTING LUG - OPTIONAL EQUIPMENT FOR MC850 AND MC900
Mfg. item #: SPLL
MILSPLL
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$114.00

301
RH
REVERSIBLE HOPPER - OPTIONAL EQUIPMENT FOR MC850 AND MC900
Mfg. item #: RH
MILRH
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
Call for Price

301
RHSP
REMOVABLE HOPPER SIDE PLATE - OPTIONAL EQUIPMENT FOR MC850 AND MC900
Mfg. item #: RHSP
MILRHSP
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$163.00

301
CCF5
COMMERCIAL CURB FORMS FOR 5 INCH MILLER AUGERS
Mfg. item #: CCF5
MILCCF5
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$635.00

301
CCF6
COMMERCIAL CURB FORMS FOR 6 INCH MILLER AUGERS
Mfg. item #: CCF6
MILCCF6
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$635.00

301
CCF8
COMMERCIAL CURB FORMS FOR 8 INCH MILLER AUGERS
Mfg. item #: CCF8
MILCCF8
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$755.00

301
CCF10
COMMERCIAL CURB FORMS FOR 10 INCH MILLER AUGERS
Mfg. item #: CCF10
MILCCF10
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$1,497.00

301
PA-84-30
84 ALUMINUM HANDLE 30 PLAIN EDGE ** SHIPS GROUND UPS/FEDEX, WEIGHT = 18 LBS
Mfg. item #: PA-84-30
MILPA-84-30
Call for freight quote on this item or we will confirm freight charges before shipping.1
$74.55

301
PA-84-30S
84 ALUMINUM HANDLE 30 PLAIN EDGE- (L-16 BRACE) ** SHIPS GROUND UPS/FEDEX, WEIGHT = 18 LBS
Mfg. item #: PA-84-30S
MILPA-84-30S
Call for freight quote on this item or we will confirm freight charges before shipping.1
$74.55

301
PA-84-36
84 ALUMINUM HANDLE 36 PLAIN EDGE ** SHIPS GROUND UPS/FEDEX, WEIGHT = 25 LBS
Mfg. item #: PA-84-36
MILPA-84-36
Call for freight quote on this item or we will confirm freight charges before shipping.1
$76.10

301   1
PA-84-36S
84 ALUMINUM HANDLE 36 PLAIN EDGE- (L-16 BRACE) ** SHIPS GROUND UPS/FEDEX, WEIGHT = 25 LBS
Mfg. item #: PA-84-36S
MILPA-84-36S
Call for freight quote on this item or we will confirm freight charges before shipping.1
$76.10

301
SA-84-30
84 ALUMINUM HANDLE 30 ONE EDGE SERRATED ** SHIPS GROUND UPS/FEDEX, WEIGHT = 18 LBS
Mfg. item #: SA-84-30
MILSA-84-30
Call for freight quote on this item or we will confirm freight charges before shipping.1
$77.60

301
SA-84-30S
84 ALUMINUM HANDLE 30 ONE EDGE SERRATED- (L-16 BRACE) ** SHIPS GROUND UPS/FEDEX, WEIGHT = 18 LBS
Mfg. item #: SA-84-30S
MILSA-84-30S
Call for freight quote on this item or we will confirm freight charges before shipping.1
$77.60

301
SA-84-36
84 ALUMINUM HANDLE 36 ONE EDGE SERRATED ** SHIPS GROUND UPS/FEDEX, WEIGHT = 25 LBS
Mfg. item #: SA-84-36
MILSA-84-36
Call for freight quote on this item or we will confirm freight charges before shipping.1
$79.40

301
SA-84-36S
84 ALUMINUM HANDLE 36 ONE EDGE SERRATED- (L-16 BRACE) ** SHIPS GROUND UPS/FEDEX, WEIGHT = 25 LBS
Mfg. item #: SA-84-36S
MILSA-84-36S
Call for freight quote on this item or we will confirm freight charges before shipping.1
$79.40

301
LA-66-36
66 ANODIZED ALUMINUM HANDLE 36" BLADE ** SHIPS GROUND UPS/FEDEX, WEIGHT = 18 LBS
Mfg. item #: LA-66-36
MILLA-66-36
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

301
LA-84-36
84 ANODIZED ALUMINUM HANDLE 36" BLADE ** SHIPS GROUND UPS/FEDEX, WEIGHT = 18 LBS
Mfg. item #: LA-84-36
MILLA-84-36
Call for freight quote on this item or we will confirm freight charges before shipping.1
$81.60

301
HR-180A
HAND ROLLER, 15" X 18", 150# ** SHIPS GROUND UPS/FEDEX, WEIGHT = 150 LBS
Mfg. item #: HR-180A
MILHR-180A
Call for freight quote on this item or we will confirm freight charges before shipping.1
$1,378.00

301
HTS 8X8
8X8 HAND TAMP WITH STEEL HANDLE ** SHIPS GROUND UPS/FEDEX, WEIGHT = 18 LBS
Mfg. item #: HTS 8X8
MILHTS 8X8
Call for freight quote on this item or we will confirm freight charges before shipping.1
$136.00

301
L-10-P
30 PLAIN EDGE BLADE ** SHIPS GROUND UPS/FEDEX, WEIGHT = 18 LBS
Mfg. item #: L-10-P
MILL-10-P
Call for freight quote on this item or we will confirm freight charges before shipping.1
$32.00

301
L-10-S
30 SERRATED 1 EDGE BLADE ** SHIPS GROUND UPS/FEDEX, WEIGHT = 18 LBS
Mfg. item #: L-10-S
MILL-10-S
Call for freight quote on this item or we will confirm freight charges before shipping.1
$40.40

301
L-11-P
36 PLAIN EDGE BLADE ** SHIPS GROUND UPS/FEDEX, WEIGHT = 18 LBS
Mfg. item #: L-11-P
MILL-11-P
Call for freight quote on this item or we will confirm freight charges before shipping.1
$36.40

301
L-11-S
36 SERRATED 1 EDGE BLADE ** SHIPS GROUND UPS/FEDEX, WEIGHT = 18 LBS
Mfg. item #: L-11-S
MILL-11-S
Call for freight quote on this item or we will confirm freight charges before shipping.1
$46.25

301
L-16
STAMPED STEEL BRACE ** SHIPS GROUND UPS/FEDEX, WEIGHT = 18 LBS
Mfg. item #: L-16
MILL-16
Call for freight quote on this item or we will confirm freight charges before shipping.1
$11.70

301
L-7B
84 ALUMINUM HANDLE ** SHIPS GROUND UPS/FEDEX, WEIGHT = 23 LBS
Mfg. item #: L-7B
MILL-7B
Call for freight quote on this item or we will confirm freight charges before shipping.1
$49.80

301
L-9
ALUMINUM HANDLE SUPPORT TUBE ** SHIPS GROUND UPS/FEDEX, WEIGHT = 18 LBS
Mfg. item #: L-9
MILL-9
Call for freight quote on this item or we will confirm freight charges before shipping.1
$11.70

301
LR-1
36 LANDSCAPE RAKE HEAD ** SHIPS GROUND UPS/FEDEX, WEIGHT = 18 LBS
Mfg. item #: LR-1
MILLR-1
Call for freight quote on this item or we will confirm freight charges before shipping.1
$53.10

301
91000-14
HAND ROLLER BEARING ** SHIPS GROUND UPS/FEDEX, WEIGHT = 18 LBS
Mfg. item #: 91000-14
MIL91000-14
Call for freight quote on this item or we will confirm freight charges before shipping.1
$31.10

301
Copyright © 2024 Smith-Hamilton, Inc
0.095 230602 07:10