![]() |
![]() |
MC550 and MC650 Commercial Curbilders | MC900 Commercial Curbilders |
Click here to download Instruction Manual
Click here to download Curb Mix Info
Click here to download Choosing Auger Size Chart
Click here to download CFD for 5 inch Auger
Click here to download CFD for 6 inch Auger
Click here to download CFD for 8 inch Auger
Commercial Curbilders
PRODUCT OVERVIEW
For over fifty years the Miller MC Series Curbilders have offered unequaled performance and versatility for the placement of freestanding curb. These simple and efficient self-propelled machines
operate on the extrusion principle and provide the most economical means available of constructing small to mid-sized continuous curb from either concrete or asphalt. This quick and efficient
process drastically reduces the high labor costs associated with hand formed and poured curb and produces high quality, extremely dense curb at a rate of up to 15 fpm (up to 30 fpm for MC900).
Miller exclusive interchangeable extrusion auger assemblies give each Curbilder the capacity to extrude more shapes and sizes than any machine in its class, from 3-1/2in to 18in high curb. A wide
variety of options allow these machines to meet the toughest specification work.
Miller Advantages
Specifications | ||||
---|---|---|---|---|
MC550 | MC650 | MC850 | MC900 | |
Operating Weight | 668 lb. | 718 lb. | 918 lb. | 959 lb. |
Height (Steering handle down) | 38in | 38in | 40.5in | |
Width | 32.25in | 32.25in | 32.25in | |
Length with Form (steering handle up) | 77.5in | 77.5in | 91.5in | |
Wheelbase | 52.75in | 52.75in | 71in | |
Hopper Capacity | 6.1 cubic feet | 6.1 cubic feet | 9.0 cubic feet | |
Standard Tire Configuration | (9) 8in dia. x 2in solid rubber | (9) 8in dia. x 2in solid rubber |
(4) 4.10 x 3.50 pneumatic front + (3) 8in dia. x 2.5in solid rubber rear |
|
Engines |
13 HP Honda 14 HP Kohler |
20.3 HP Honda | 20.3 HP Honda | |
Engine Starting System | Recoil | Electric | Electric | Electric |
Fuel Capacity | 1.6 gal. | 2.3 gal. | 3.3 gal. | |
Standard Auger Configuration | (2) cast 6in dia. x 9in lg. | (2) cast 6in dia. x 9in lg. | (3) cast 6in dia. x 9in lg. | |
Optional Auger Configurations |
(2) cast 5in dia. x 9in lg. (1) welded 8in dia. x 18in lg. |
(2) cast 5in dia. x 9in lg. (1) welded 8in dia. x 18in lg. (1) welded 10in dia. x 18in lg. |
(3) cast 5in dia. x 9in lg. (3) welded 8in dia. x 18in lg. (3) welded 10in dia. x 18in lg. |
|
Hollow Auger Shaft (to extrude rebar) | Optional | Optional | Not available | |
Drive System |
Automatic centrifugal clutch to enclosed 8:1 gear reducer; final auger drive chain and sprocket Extrusion process provides self-propulsion |
|||
Steering | Tie rod with 40 inch steering handle | |||
Brake | Friction pad on steering handle |
OTHER AVAILABLE MODELS:
MC655 Same as MC650, but with modified frame allowing extrusion under existing guardrail.
MC750 Same as MC650, but with two continuously turning auger assemblies, one mounted on the left and one on the right, allowing immediate changeover from right to left hand
extrusion.
Sample Curb Forms for Miller Curbers Equipped with 5 inch Auger Assembly
Sample Curb Forms for Miller Curbers Equipped with 6 inch Auger Assembly
Sample Curb Forms for Miller Curbers Equipped with 8 inch Auger Assembly
Limited Warranty for Equipment
The Miller Curber Company guarantees to the original purchaser the frame and metal components of the equipment manufactured by Miller Curber Company to be free from defects in material and workmanship for six (6) years from date of original shipment from Miller Curber Company. This warranty excludes all equipment, parts, components and accessories not manufactured by Miller, including, but not limited to: engines, transmissions, pumps, cylinders, batteries, tires, bearings, belts, etc. Such products are warranted by their respective manufacturer, whose warranty will be the governing warranty for that particular product. Individual manufacturers’ warranties are available upon request.
This is a LIMITED WARRANTY. This warranty is expressly in lieu of all other warranties, express or implied, including the warranties of merchantability and fitness for use and all other obligations or liabilities on our part. And we neither assume nor authorize any other to assume for us, any other liability in connection with the sale of any Miller Curber Company products. There are no warranties which extend beyond the description on the face hereof. To validate this warranty for equipment the registration form which accompanies each machine must be completed and returned to the factory by the customer within two (4) weeks after the purchase of the machine.
Emission Control System Warranty for Emissions Equipment Installed on Miller Curber Models MC-850/900
The Miller Curber Company guarantees to the original purchaser of all of the emissions equipment installed on Miller Curber Model MC850/900 to be free from defects in material and workmanship for two (2) years from the date of original shipment from Miller Curber Co. Emission equipment includes: 1) welded steel fuel tank, 2) sealing, tethered fuel cap, c) low permeation fuel supply hose, and d) low permeation fuel vapor hose. Exclusions: Failures other than those resulting from defects in material and workmanship are not covered by this warranty. This warranty does not extend to emission control systems or parts which are affected or damaged by owner abuse, neglect, improper maintenance, misuse, misfueling, improper storage, accident and/or collision, the incorporation of, or any use of, any add-on or modified parts, unsuitable attachments, or the unauthorized alteration of any part.
Limited Warranty for Hand Tools
The Miller Curber Company guarantees to the original purchaser the hand tools manufactured by Miller Curber Company to be free from defects in material and workmanship for ninety days from the date of purchase. The obligation of the Miller Curber Company under this warranty shall be limited to the repair or replacement of any product or parts thereof which may prove to be defective in material or workmanship, to the satisfaction of Miller upon inspection, under normal use and service. This warranty shall not apply to any product or part of said product, which in the judgment of the Miller Curber Company, was not operated, or maintained correctly, in every respect, as outlined in the manual or information which accompanies each product. This warranty does not apply to failure occurring as a result of abuse, misuse, negligent repairs, corrosion, erosion, normal wear and tear, alterations or modifications made to the product without the express written consent of the Miller Curber Company.
The total liability of Miller Curber Company with respect to their sale of products or services furnished hereunder, in connection with the performance or breach
thereof, or from the sale, delivery, installation, repair or technical direction covered by or furnished under the sale, whether based on contract, warranty, negligence, indemnity, strict
liability, or otherwise shall not exceed the purchase price of the unit of product upon which such liability is based.
Since Miller Curber Company has no means of controlling the final use of its products by the consumer or user, it is the responsibility of the immediate seller(s) to inform the user of each product of the purposes and conditions for which the product may be fit and suitable, including the precautionary measures which must be taken in order to insure the safety of the user and of third persons and property.
Both the seller and the manufacturer shall be held free and harmless from any liability from injury to any person(s), loss or damage to any property, direct, incidental, consequential, or otherwise, resulting from the accidental, negligent, altered, abused or misused operation of the machine. Before using, the user shall determine the suitability of the product for the intended use, and the user assumes all risk and liability what-so-ever in connection with such use. Any product built to customer design shall be warranted as above only with respect to materials and workmanship. The Miller Curber Company shall be held harmless from any injury or damage resulting from such custom design, or functional dissatisfaction of such product. Miller Curber Company reserves the right to modify, alter and improve any part or parts without incurring any obligation to replace any part or parts previously sold without such modified, altered or improved part or parts. Authorization from the Miller Curber Company is required prior to any warranty work being performed. Any warranty work authorized by the Miller Curber Company will be performed only at the location(s) authorized and by the person(s) authorized. When warranty repairs require specific procedures, repairs will be performed as instructed by the Miller Curber Company. Authorization from the Miller Curber Company is required prior to any products or parts of products being returned to the factory for warranty consideration.
All returns must be shipped prepaid and are subject to inspection.
This warranty does not obligate the Miller Curber Company to bear the cost of service, labor, mileage, delivery charges, or other expenses that have not been previously authorized by the Miller Curber Company. In the event that new parts are shipped to a dealer/user to replace alleged defective parts, prior to Miller Curber Company receiving the alleged defective parts, and prior to Miller Curber Company determining that parts are defective and covered under warranty, the new parts will be shipped and invoiced as a normal parts order. The dealer/user invoiced under these conditions is liable for payment of the parts invoice. At such time that the returned parts are determined to be defective, and covered under warranty, a credit to account will be issued for the warranted amount.
![]() |
ALL STEEL HAND ROLLER
|
![]() |
ALL STEEL HAND TAMP
|
![]() |
ALL ALUMINUM LANDSCAPE RAKE
|
05 - Curbilder product category
13 - horsepower of motor
HR - motor type, H for Honda, K for Kohler, second digit R for recoil, E for electric start
650 - series of Curbilder
06 - auger diameter
S - type of auger, S for solid, H for hollow
S - type of wheels, S for solid rubber, P for pneumatic
Models and Accessories | |
---|---|
Part Number | Model |
05-13HR-550-05SS | MC550 5 inch solid auger Commercial Curbers - 13 HP Honda recoil |
05-13HR-550-05HS | MC550 5 inch hollow auger Commercial Curbers - 13 HP Honda recoil |
05-13HR-550-06SS | STANDARD MODEL - MC550 6 inch solid auger Commercial Curbers - 13 HP Honda recoil |
05-13HR-550-06HS | MC550 6 inch hollow auger Commercial Curbers - 13 HP Honda recoil |
05-13HE-650-05SS | MC650 5 inch solid auger Commercial Curbers - 13 HP Honda Elec Start |
05-13HE-650-05HS | MC650 5 inch hollow auger Commercial Curbers - 13 HP Honda Elec Start |
05-13HE-650-06SS | STANDARD MODEL - MC650 6 inch solid auger Commercial Curbers - 13 HP Honda Elec Start |
05-13HE-650-06HS | MC650 6 inch hollow auger Commercial Curbers - 13 HP Honda Elec Start |
05-13HE-650-08SS | MC650 8 inch solid auger Commercial Curbers - 13 HP Honda Elec Start |
05-13HE-650-08HS | MC650 8 inch hollow auger Commercial Curbers - 13 HP Honda Elec Start |
05-13HE-750-05SS | MC750 twin 5 inch solid augers Commercial Curbers - 13 HP Honda Elec Start |
05-13HE-750-05SS | MC750 twin 5 inch hollow augers Commercial Curbers - 13 HP Honda Elec Start |
05-13HE-750-06SS | STANDARD MODEL - MC750 twin 6 inch solid augers Commercial Curbers - 13 HP Honda Elec Start |
05-13HE-750-06HS | MC750 twin 6 inch hollow augers Commercial Curbers - 13 HP Honda Elec Start |
Optional Equipment for MC550, MC650, MC655 and MC750 | |
20HP | 20 HP Honda twin cylinder engine in lieu of 13 HP Honda (MC650 only) |
14HP | 14 HP Kohler engine in lieu of 13 HP Honda |
PN-TIRES | 4.10/3.50 pneumatic tires (6) in lieu of 8 x 2 inch solid rubber |
RHOP | Removable hopper side plate |
SPL | Single point lifting lug |
AWH | Additional Wheelbarrow Hopper, right or left hand (not available for MC655) |
05-13HE-655-05SS | MC655 5 inch solid auger Commercial Curbers - 13 HP Honda Elec Start |
05-13HE-655-06SS | STANDARD MODEL - MC655 6 inch solid auger Commercial Curbers - 13 HP Honda Elec Start |
05-20HE-850-06SPS | MC850 6 inch solid auger Commercial Curbers - 20HP Honda Elec Start |
05-20HE-850-06HPS | MC850 6 inch hollow auger Commercial Curbers - 20HP Honda Elec Start |
05-20HE-850-08SPS | STANDARD MODEL - MC850 8 inch solid auger Commercial Curbers - 20HP Honda Elec Start |
05-20HE-850-08HPS | MC850 8 inch hollow auger Commercial Curbers - 20HP Honda Elec Start |
05-20HE-850-10SPS | MC850 10 inch solid auger Commercial Curbers - 20HP Honda Elec Start |
05-20HE-900-06SPS | STANDARD MODEL - MC900 6 inch solid auger Commercial Curbers - 20HP Honda Elec Start |
05-20HE-900-06HPS | MC900 6 inch hollow auger Commercial Curbers - 20HP Honda Elec Start |
05-20HE-900-08SPS | MC900 8 inch solid auger Commercial Curbers - 20HP Honda Elec Start |
05-20HE-900-10SPS | mc900 10 inch solid auger Commercial Curbers - 20HP Honda Elec Start |
Optional Equipment for MC850 and MC900 | |
SPLL | Single point lifting lug - Optional Equipment for MC850 and MC900 |
RH | Reversible hopper - Optional Equipment for MC850 and MC900 |
RHSP | Removable hopper side plate - Optional Equipment for MC850 and MC900 |
Commercial Curb Forms | |
---|---|
CCF5 | Commercial Curb Forms for 5 inch Miller Augers |
CCF6 | Commercial Curb Forms for 6 inch Miller Augers |
CCF8 | Commercial Curb Forms for 8 inch Miller Augers |
CCF10 | Commercial Curb Forms for 10 inch Miller Augers |
Tools and Accessories | |
---|---|
PA-84-30 | 84 aluminum handle 30 inch plain edge |
PA-84-30S | 84 aluminum handle 30 inch plain edge (L-16 Brace) |
PA-84-36 | 84 aluminum handle 36 inch plain edge |
PA-84-36S | 84 aluminum handle 36 inch plain edge (L-16 Brace) |
SA-84-30 | 84 aluminum handle 30 inch one edge serrated |
SA-84-30S | 84 aluminum handle 30 inch one edge serrated (L-16 Brace) |
SA-84-36 | 84 aluminum handle 36 inch one edge serrated |
SA-84-36S | 84 aluminum handle 36 inch one edge serrated (L-16 Brace) |
LA-66-36 | 66 anodized aluminum handle 36 inch blade |
LA-84-36 | 84 anodized aluminum handle 36 inch blade |
HR-180A | Hand Roller, 15 x 18 inch, 150 lb |
HTS 8X8 | 8x8 inch Hand Tamp with steel handle |
L-10-P | 30 plain edge blade |
L-10-S | 30 serrated 1 edge blade |
L-11-P | 36 plain edge blade |
L-11-S | 36 serrated 1 edge blade |
L-16 | Stamped steel brace |
L-7B | 84 aluminum handle |
L-9 | Aluminum handle support tube |
LR-1 | 36 landscape rake head |
91000-14 | Hand roller bearing |
MACHINE PRICE DOES NOT INCLUDE CURB FORM OR TROWELS
MACHINE PRICE DOES NOT INCLUDE CURB FORM OR TROWELS
MACHINE PRICE DOES NOT INCLUDE CURB FORM OR TROWELS
MACHINE PRICE DOES NOT INCLUDE CURB FORM OR TROWELS
MACHINE PRICE DOES NOT INCLUDE CURB FORM OR TROWELS
MACHINE PRICE DOES NOT INCLUDE CURB FORM OR TROWELS
MACHINE PRICE DOES NOT INCLUDE CURB FORM OR TROWELS
MACHINE PRICE DOES NOT INCLUDE CURB FORM OR TROWELS
MACHINE PRICE DOES NOT INCLUDE CURB FORM OR TROWELS
MACHINE PRICE DOES NOT INCLUDE CURB FORM OR TROWELS
MACHINE PRICE DOES NOT INCLUDE CURB FORM OR TROWELS
MACHINE PRICE DOES NOT INCLUDE CURB FORM OR TROWELS
MACHINE PRICE DOES NOT INCLUDE CURB FORM OR TROWELS
MACHINE PRICE DOES NOT INCLUDE CURB FORM OR TROWELS
MACHINE PRICE DOES NOT INCLUDE CURB FORM OR TROWELS
MACHINE PRICE DOES NOT INCLUDE CURB FORM OR TROWELS
MACHINE PRICE DOES NOT INCLUDE CURB FORM OR TROWELS
MACHINE PRICE DOES NOT INCLUDE CURB FORM OR TROWELS
MACHINE PRICE DOES NOT INCLUDE CURB FORM OR TROWELS
MACHINE PRICE DOES NOT INCLUDE CURB FORM OR TROWELS
MACHINE PRICE DOES NOT INCLUDE CURB FORM OR TROWELS
MACHINE PRICE DOES NOT INCLUDE CURB FORM OR TROWELS
MACHINE PRICE DOES NOT INCLUDE CURB FORM OR TROWELS
MACHINE PRICE DOES NOT INCLUDE CURB FORM OR TROWELS