chat now with southern tool
Technical Sales 1–800–458–3687

JET JMD Milling/Drilling Machines

 

JMD-15 Mill/Drill With R-8 Taper 115/230V 1Ph JMD-18 Mill/Drill With R-8 Taper 115/230V 1Ph JMD-18PFN MILL/DRILL WITH POWER DOWNFEED 115/230V 1PH
JMD-15 Mill/Drill
With R-8 Taper 115/230V 1Ph
JMD-18 Mill/Drill
With R-8 Taper 115/230V 1Ph
JMD-18PFN Mill/Drill
With Power Downfeed 115/230V 1Ph
s-h alt

 The Jet JMD-15, R-8 Taper, 1HP, 1Ph, 115/230V
has a 2 Year warranty

Download pdf manual

  • MILLING/DRILLING MACHINES
  • One-piece cast iron column for added support
  • Belt cover quick slide latch allows faster belt adjustment to change spindle speeds
  • Base taper allows for easier clean-up
  • Larger hand wheel knobs
  • UL Listed motor
  • Extra large worktable
  • Heavy-duty tapered roller bearings support the spindle, resulting in greater tolerance and more accurate drilling depth
  • New positive quick-stop knob and easy-to-read internal depth gauge (external on JMD-15)
  • 360? head swivel
  • Heavy-duty power downfeed with manual fine feed (JMD-18PFN)
  • Three power down feeds (JMD-18PFN .004, .007, .01 inch)
  • Worklamp
  • Adjustable carbide facemill
  • Drill press angle vise
  • 1/2 drill chuck, chuck arbor
  • Draw bar
JET JMD-15 / 15 in MILL DRILL / 350015
Drilling Capacity (In.) 1
Face Mill Capacity (In.) 2-1/2
End Mill Capacity (In.) 1/2
Swing (In.) 14-1/2
Max Distance Spindle to Table (In.) 15
Spindle Taper (In. x TPI) R-8
Spindle Travel (In.) 3-1/2
Quill Diameter (In.) 2-7/16
Column Diameter (In.) 3-5/8
Number of Spindle Speeds 12
Range of Spindle Speeds (RPM) 110 - 2,580
Table Size (L x W) (In.) 7-1/2 x 23
Table Longitudinal Travel (In.) 14
Work Table Weight Capacity (Lbs.) 350
T-Slots Number and Size (In.) 4, 9/16
T-Slot Centers (In.) 1-13/16
Base Dimensions (In.) 12-1/2 x 19-3/4
Motor (HP) 1 HP, 115/230V, 1Ph
Overall Dimensions (L x W x H) (In.) 38 x 37-1/2 x 42
Weight (Lbs.) 440

 

The JDM-18 Mill Drill is one of a kind. The one piece cast iron column adds support to tackle various drilling applications. Each mill drill comes equipped with a draw bar, adjustable carbide facemill, worklamp, 360 degree swivel head, and extra large worktable. Did we mention the JDM-18 is UL listed

The Jet JMD-18, R-8 Taper, 2HP, 1Ph, 115V/230V
has a 2 Year warranty

Download pdf manual

  • MILLING/DRILLING MACHINES
  • One-piece cast iron column for added support
  • Belt cover quick slide latch allows faster belt adjustment to change spindle speeds
  • Base taper allows for easier clean-up
  • Larger hand wheel knobs
  • UL Listed motor
  • Extra large worktable
  • Heavy-duty tapered roller bearings support the spindle, resulting in greater tolerance and more accurate drilling depth
  • New positive quick-stop knob and easy-to-read internal depth gauge (external on JMD-15)
  • 360 degree head swivel
  • Heavy-duty power downfeed with manual fine feed (JMD-18PFN)
  • Three power down feeds (JMD-18PFN .004, .007, .01 inch)
  • Worklamp included
  • Adjustable carbide facemill
  • Drill press angle vise
  • 1/2 drill chuck, chuck arbor
  • Draw bar included
JMD-18 / 18 in MILL DRILL / 350018
Drilling Capacity (In.) 1-1/4
Face Mill Capacity (In.) 3
End Mill Capacity (In.) 3/4
Swing (In.) 15-7/8
Max Distance Spindle to Table (In.) 18
Spindle Taper (In. x TPI) R-8
Spindle Travel (In.) 5
Quill Diameter (In.) 3
Column Diameter (In.) 4-1/2
Number of Spindle Speeds 12
Range of Spindle Speeds (RPM) 150 - 3,000
Table Size (L x W) (In.) 9-1/2 x 32-1/4
Table Longitudinal Travel (In.) 20-1/2
Work Table Weight Capacity (Lbs.) 400
T-Slots Number and Size (In.) 4, 5/8
T-Slot Centers (In.) 1-13/16
Base Dimensions (In.) 15-3/4 x 23-3/4
Motor (HP) 2 HP, 115/230V, 1Ph
Overall Dimensions (L x W x H) (In.) 47 x 40 x 51
Weight (Lbs.) 660

 

The JET JMD-18PFN Mill Drill with built in downfeed boasts a 2 HP motor on a one-piece cast iron column. The JMD comes equipped with a worklamp, heavy-duty power downfeed with manual line feed, adjustable carbide facemill, and also has a UL listed motor.

  The Jet JMD-18PFN, Built-in Power Downfeed, 2HP, 1Ph, 230V Only
has a 2 Year warranty

Download pdf manual

  • MILLING/DRILLING MACHINES
  • One-piece cast iron column for added support
  • Belt cover quick slide latch allows faster belt adjustment to change spindle speeds
  • Base  taper allows for easier clean-up
  • Larger hand wheel knobs
  • UL Listed motor
  • Extra large worktable
  • Heavy-duty tapered roller bearings support the spindle, resulting in greater tolerance and more accurate drilling depth
  • New positive quick-stop knob and easy-to-read internal depth gauge (external on JMD-15)
  • 360 degree head swivel
  • Heavy-duty power downfeed with manual fine feed (JMD-18PFN)
  • Three power down feeds (JMD-18PFN .004, .007, .01 inch)
  • Worklamp
  • Adjustable carbide facemill
  • Drill press angle vise
  • 1/2 drill chuck, chuck arbor
  • Draw bar
JMD-18PF / 18 IN MILL DRILL WITH POWER DOWNFEED / 350020
Powerfeed Downfeed
Drilling Capacity (In.) 1-1/4
Face Mill Capacity (In.) 3
End Mill Capacity (In.) 3/4
Swing (In.) 15-7/8
Max Distance Spindle to Table (In.) 26
Spindle Taper (In. x TPI) R-8
Spindle Travel (In.) 5
Spindle Travel Auto (In.) 4-1/4
Quill Down Feed Rates (IPR) 0.0047”, 0.007”, 0.001”
Quill Diameter (In.) 3
Column Diameter (In.) 4-1/2
Number of Spindle Speeds 12
Range of Spindle Speeds (RPM) 150 - 3,000
Table Size (L x W) (In.) 9-1/2 x 31-3/4
Table Longitudinal Travel (In.) 20-1/2
Work Table Weight Capacity (Lbs.) 400
T-Slots Number and Size (In.) 4, 5/8
T-Slot Centers (In.) 1-13/16
Base Dimensions (In.) 15-3/4 x 23-3/4
Motor (HP) 2 HP, 230V Only, 1 Ph
Overall Dimensions (L x W x H) (In.) 47 x 40 x 51
Weight (Lbs.) 700

 

s-h alt WARRANTY AND SERVICE

WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your Jet® tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.
JET MILLING AND DRILLING MACHINES
350017 JMD-15, R-8 Taper, 1HP, 1Ph, 115/230V
350018 JMD-18,R-8 Taper, 2HP, 1Ph, 230V Only
350020 JMD-18PFN, Built-in Power Downfeed, 2HP, 1Ph, 230V Only
350127 JMD-18 with DP700 DRO and Table Powerfeed Installed
JET® MILLING AND DRILLING MACHINE DRO AND ACCESSORY PACKAGES
350125 JMD-15 with NEWALL DP700 DRO Installed
350119 JMD-18 Mill/Drill w/ X Powerfeed
350401 JMD-18 Mill/Drill with VUE DRO
350126 JMD-18 with NEWALL DP700 DRO Installed
350402 JMD-18PFN MILL/DRILL with VUE DRO
350128 JDM-18PFN Mill Drill with NEWALL DP700 2 Axis DRO installed
JMD-18 SERIES ACCESSORIES, NOT INSTALLED
350045 CS-18, Stand for 350018 & 350020
650132 CS-R8, 6-piece R-8 Collet Set 1/8" - 3/4" by 1/8ths for Mills

 

More Informationshow more
350017
JMD-15 MILL/DRILL WITH R-8 TAPER 115/230V 1PH
Mfg. item #: 350017
WMH350017
Limited time! FREE SHIPPING, FREE TAILGATE & RESIDENTIAL DELIVERIES on this and other JET, POWERMATIC, WILTON and PERFORMAX products ordered together.1020
$1,734.28

16
More Informationshow more
350018
JMD-18 MILL/DRILL WITH R-8 TAPER 115/230V 1PH
Mfg. item #: 350018
WMH350018
Limited time! FREE SHIPPING, FREE TAILGATE & RESIDENTIAL DELIVERIES on this and other JET, POWERMATIC, WILTON and PERFORMAX products ordered together.1020
$2,354.71

16
More Informationshow more
350020
JMD-18PFN MILL/DRILL WITH POWER DOWNFEED 115/230V 1PH
Mfg. item #: 350020
WMH350020
lease to own for as little as:$60 per month!
Limited time! FREE SHIPPING, FREE TAILGATE & RESIDENTIAL DELIVERIES on this and other JET, POWERMATIC, WILTON and PERFORMAX products ordered together.1020
$2,999.00

16
More Informationshow more
350127
JMD-18 MILL/DRILL WITH NEWALL DP700 DRO AND X-AXIS TABLE POWERFEED
Mfg. item #: 350127
WMH350127
lease to own for as little as:$100 per month!
Limited time! FREE SHIPPING, FREE TAILGATE & RESIDENTIAL DELIVERIES on this and other JET, POWERMATIC, WILTON and PERFORMAX products ordered together.1020
$4,999.00

16
More Informationshow more
350125
JMD-15 MILL/DRILL WITH NEWALL DP700 DRO
Mfg. item #: 350125
WMH350125
lease to own for as little as:$70 per month!
Limited time! FREE SHIPPING, FREE TAILGATE & RESIDENTIAL DELIVERIES on this and other JET, POWERMATIC, WILTON and PERFORMAX products ordered together.1020
$3,499.00

16
More Informationshow more
350119
JMD-18 MILL/DRILL WITH X-AXIS TABLE POWERFEED
Mfg. item #: 350119
WMH350119
lease to own for as little as:$66 per month!
Limited time! FREE SHIPPING, FREE TAILGATE & RESIDENTIAL DELIVERIES on this and other JET, POWERMATIC, WILTON and PERFORMAX products ordered together.1020
$3,299.00

16
More Informationshow more
350401
JMD-18 MILL/DRILL WITH ACU-RITE VUE DRO
Mfg. item #: 350401
WMH350401
lease to own for as little as:$84 per month!
Limited time! FREE SHIPPING, FREE TAILGATE & RESIDENTIAL DELIVERIES on this and other JET, POWERMATIC, WILTON and PERFORMAX products ordered together.1020
$4,199.00

16
More Informationshow more
350126
JMD-18 MILL/DRILL WITH NEWALL DP700 DRO
Mfg. item #: 350126
WMH350126
lease to own for as little as:$84 per month!
Limited time! FREE SHIPPING, FREE TAILGATE & RESIDENTIAL DELIVERIES on this and other JET, POWERMATIC, WILTON and PERFORMAX products ordered together.1020
$4,199.00

16
More Informationshow more
350402
JMD-18PFN MILL/DRILL WITH ACU-RITE VUE DRO
Mfg. item #: 350402
WMH350402
lease to own for as little as:$94 per month!
Limited time! FREE SHIPPING, FREE TAILGATE & RESIDENTIAL DELIVERIES on this and other JET, POWERMATIC, WILTON and PERFORMAX products ordered together.1020
$4,699.00

16
More Informationshow more
350128
JMD-18PFN MILL/DRILL WITH NEWALL DP700 DRO
Mfg. item #: 350128
WMH350128
lease to own for as little as:$100 per month!
Limited time! FREE SHIPPING, FREE TAILGATE & RESIDENTIAL DELIVERIES on this and other JET, POWERMATIC, WILTON and PERFORMAX products ordered together.1020
$4,999.00

16
More Informationshow more
350045
CS-18, FLOOR STAND FOR MILL/DRILLS
Mfg. item #: 350045
WMH350045
Limited time! FREE SHIPPING, FREE TAILGATE & RESIDENTIAL DELIVERIES on this and other JET, POWERMATIC, WILTON and PERFORMAX products ordered together.1020
$319.00

16   1
More Informationshow more
650132
++ CS-R8, 6-PIECE R-8 COLLET SET 1/8 - 3/4 (8THS)
Mfg. item #: 650132
WMH650132
$11.95 Shipping on all JET, Powermatic, Wilton and Performax orders less that $199.95. Combine products to meet the minimum order requirement for Free Shipping.1019
$92.80

16
Copyright © 2017 Smith-Hamilton, Inc
0.009 170921 11:35