Technical Sales 1–800–458–3687

MultiQuip Diesel-Powered Welder - Generators

SDW225SSA1 225 amp Welder, 6KW, 120/240V Gen, T4F Kubota DLW300ESA1 300 amp Welder, 10.5KW, 120/240V, T4F Kubota DLW400ESA4 400 amp Welder, 14kW, 120/240V, T4F Kubota
SDW225SSA1 225 amp Welder, 6KW, 120/240V Gen, T4F Kubota
Shown with optional trailer
DLW300ESA1 300 amp Welder, 10.5KW, 120/240V, T4F Kubota
Shown with optional trailer
DLW400ESA4 400 amp Welder, 14kW, 120/240V, T4F Kubota
Shown with optional trailer
DLW330X2 340 amp Welder, 10.5 KW, 120/240V, T4F Kubota DAW500SA4 500 amp Welder, 3KW, 120/240V Gen, T4F Kubota DLW500ESA4 500 amp Welder, 14kW, 120/240V, T4F Isuzu
DLW330X2 340 amp Welder, 10.5 KW, 120/240V, T4F Kubota DAW500SA4 500 amp Welder, 3KW, 120/240V Gen, T4F Kubota DLW500ESA4 500 amp Welder, 14kW, 120/240V, T4F Isuzu

 

Welder-Generators
SDW225SSA1 Welder-Generators - Diesel - - Welder 225A w/6kW, Tier4, GFCI
SDW225SSAWR Welder-Generators - Diesel - - Welder 225A w/6kW, Tier4 w/remote
SDW225AT10W Welder-Generators - Diesel - - Welder 225A w/6kW, Tier4, w/TRLR10W
DLW300ESA1 Welder-Generators - Diesel - - Welder 300A w/10.5kW, Tier4, GFCI
DLW300ESAWR Welder-Generators - Diesel - - Welder 300A w/10.5kW Tier4 w/remote
DLW330X2 Welder-Generators - Diesel - - Welder 340A w/10.5kW Tier4
DLW330X2WR Welder-Generators - Diesel - - Welder 340A w/10.5kw int Tier 4 w/remote
DLW400ESA4 Welder-Generators - Diesel - - Welder 400A, AC 12kW w/GFCI,Tier 4 Final
DAW500SA4 Welder-Generators - Diesel - - Welder 500A, AC 3kW w/GFCI, Tier 4 final
DLW500ESA4 Welder-Generators - Diesel - - Welder 500 amp , 14kW, 120/240V, T4F Isuzu
Accessories
TRLR10W Trailer for SDW, SGW, TLW, DA7000SS
WKT225A Wheel Kit for SDW Welders, DA7000SS Generator

 


SDW225SSA1
225 amp Welder, 6KW, 120/240V Gen, T4F Kubota

The SDW225SSA1 welder/generator is a CC/CV output unit that delivers superior arc characteristics and consistent welding quality up to 225 amps. Rated for 6kW, it provides clean/quite operation in both welding and power generation with noise levels at 68.7 dBA. Designed for the construction market, you can depend on the SDW225SSA1 for its performance and long service.

  • Delivers up to 225 amps as a welder with the convenience of 6 kW of AC power as a generator
  • Can draw simultaneous AC power while welding
  • Quality voltage regulation at 2 percent (+/-)
  • Tier 4 final Kubota diesel - Model Z482
  • Smooth arc characteristics and more consistent, quality weld penetration
  • SMAW, FCAW, GMAW, GTAW and ACAC welding processes
  • Sound attenuated cabinet reduces noise output to 68.7 dBA at 23'
  • Full panel GFCI protection - OSHA and NEC compliant
  • Available in a light tower configuration as the MLTSDW7
  • Options - Wire remotes, welding cable, cable carriers, tool box, trailers, cold weather items are available for this model.
Specifications
DC Voltage CC: 28 V CV: 15-28 V
DC Current CC: 225 A CV: 225 A
Current Range 50-225 A
Max Duty Cycle
w/ Full Amps Availible
100 percent at 200 A
Welding Processes SMAW
FCAW
GMAW
GTAW
ACAC
Fuel Tank Capacity 6.6 gal 30 L
Fuel Consumption
at Rated Load
0.6 gph
Overall Length 45 in 114 cm
Overall Width 26 in 66 cm
Overall Height 31 in 80 cm
Shipping Dimensions 46 x 26 x 36 in 116.8 x 66 x 91.44 cm
Operating Weight 671 lb 305 kg
AC Power Output
(Single Phase)
6 kW
Cycle 50/60 Hz
Voltage 120/240 V
Amperage 50/25 A
Voltage Regulation 2 percent
Receptacles NEMA 5-20R 125V GFCI 20A
NEMA L5-30R 125V Twist-Lock 30A
NEMA L14-30R 125/250V Twist-Lock 30A
* Requires Adapter kit, **TRLR-MPXF has a built in 28 gal. fuel cell
Notice: Features and equipment specifications are subject to change without notice.

 

MultiQuip DLW300ATMPXF Diesel-Powered Welder-Generators

DLW300ESA1

300 amp Welder, 10.5KW, 120/240V, T4F Kubota

The DLW300ESA1 welder/generator is a CC/CV output unit that delivers superior arc characterisitcs and consistent welding quality. Rated for 10.5kW, It is the quietest welder/generator in the industry with only 59 dBA at 23 feet. The E-mode feature improves fuel effciency by allowing the operator to weld at idle up to 160 amps, reducing operating costs and noise levels.

  • Delivers up to 300 amps as a welder with the convenience of 10.5 kW of AC power as a generator
  • Can draw simultaneous AC power while welding
  • Amazing voltage regulation at 1.5 percent (+/-)
  • Tier 4 final Kubota diesel - Model D722
  • Arc Force control allows the operator to fine tune DC current during low voltage welding conditions which helps in preventing electrodes froms sticking during short arc length welding
  • Smooth arc characteristics and more consistent, quality weld penetration
  • E-mode improves fuel efficiency by allowing one operator to weld up to 160 amps while the engine maintains idle speeds.
  • SMAW, FCAW, GMAW, GTAW and ACAC welding processes
  • Sound attenuated cabinet reduces noise output to 59 dBA at 23'
  • External fuild drains for easy maintenance
  • Full panel GFCI protection - OSHA and NEC compliant
  • Options - Wire remotes, welding cable, cable carriers, tool box, trailers, cold weather items are available for this model.
Specifications
DC Voltage CC: 31 V CC: 32 V
DC Current CC: 300A
Current Range 35-300 A
Max Duty Cycle
w/ Full Amps Availible
100 percent at 280 A
Welding Processes SMAW
FCAW
GTAW
ACAC
Fuel Tank Capacity 9.5 gal 36 L
Fuel Consumption
at Rated Load
0.66 gph
Overall Length 50.8 in 1290 mm
Overall Width 26.77 in 680 mm
Overall Height 33.07 in 840 mm
Shipping Dimensions 50.8 x 26.77 x 33.07 in 1290 x 680 x 840 mm
Operating Weight 941 lb 427 kg
Shipping Weight 848 lb 385 kg
AC Power Output
(Single Phase)
10.5 kW
Cycle 50/60 Hz
Voltage 120/240 V
Amperage 87/44 A
Voltage Regulation 1.5 percent
Receptacles NEMA 5-20R 125V GFCI 20A
NEMA L5-30R 125V Twist-Lock 30A
NEMA L6-30R 250V Twist-Lock 30A
CS-6369 125/250VAC Twist-Lock 50A
**TRLR-MPXF has a built in 28 gal. fuel cell
Notice: Features and equipment specifications are subject to change without notice.

 

MultiQuip DLW400ATMP Diesel-Powered Welder - Generators

DLW400ESA4

400 amp Welder, 14kW, 120/240V, T4F Kubota

This CC (constant current) and CV (constant voltage) welder delivers up to 400 amps during single operation, or 200 amps to both outputs during dual operation. As a generator, this unit provides up to 14 kW of clean, 120/240 AC power. A digital panel display provides both amperage/voltage and troubleshooting information to the operator(s). Smart Stick, E-Mode, Arc Force are just some of the features of the DLW400ESA4 from Multiquip.

  • Delivers up to 400 amps as a welder with the convenience of 14 kW of AC power as a generator
  • Dual operator output ability
  • Can draw simultaneous AC power while welding
  • Amazing voltage regulation at 1.5 percent (+/-)
  • Tier 4 final Kubota diesel - Model D902
  • Arc Force control allows the operator to fine tune DC current during low voltage welding conditions which helps in preventing electrodes froms sticking during short arc length welding
  • Smooth arc characteristics and more consistent, quality weld penetration
  • E-mode improves fuel efficiency by allowing one operator to weld up to 200 amps while the engine maintains idle speeds. Two operators can also use this feature when the total amperage between both outputs does not exceed 200 amps.
  • Smart Stick function automatically shuts the engine down during periods of no load. The operator only needs to tap the welding rod to the grounded work for the engine to restart, making restarts while in the rafters or hanging from the side of a skyscraper a breeze.
  • SMAW, FCAW, GMAW, GTAW and ACAC welding processes
  • Sound attenuated cabinet reduces noise output to 70 dBA at 23'
  • Full panel GFCI protection - OSHA and NEC compliant
  • Options - Wire remotes, welding cable, cable carriers, tool box, trailers and cold weather items are available for this model.
Specifications
DC Voltage CC: Single 34V, Dual 27V V CV: Single 35V, Dual 28V V
DC Current CC: Single 400, Dual 200 A CV: Single 400, Dual 200 A
Current Range Single 30-400, Dual 30-200 A
Max Duty Cycle
w/ Full Amps Availible
100 percent at 350, 2 x 175 A
Welding Processes SMAW
FCAW
GTAW
ACAC
Fuel Tank Capacity 11.1 gal 42 L
Fuel Consumption
at Rated Load
1.3 gph
Overall Length 61 in 155 cm
Overall Width 29 in 74 cm
Overall Height 35 in 89 cm
Shipping Dimensions 63 x 30 x 41 in 1600 x 762 x 1041 mm
Operating Weight 11144 lb 519 kg
Shipping Weight 1027 lb 466 kg
AC Power Output
(Single Phase)
14 kW
Cycle 60 Hz
Voltage 120/240 V
Amperage 116/58 A
Voltage Regulation 1.5 percent
Receptacles NEMA 5-20R 125V GFCI 20A
NEMA L5-30R 125V Twist-Lock 30A
NEMA L6-30R 250V Twist-Lock 30A
CS-6369 125/250VAC Twist-Lock 50A
**TRLR-MPXF has a built in 28 gal. fuel cell
Notice: Features and equipment specifications are subject to change without notice.

 

DLW330X2

340 amp Welder, 10.5 KW, 120/240V, T4F Kubota

This CC (Constant Curent) and CV (Constant Voltage) welder delivers up to 340 amps during single operation, or 200 amps to both outputs during dual operation. As a generator, this unit provides up to 10.5 kW of clean, 120/240 AC power. A digital panel display provides both amperage/voltage and troubleshooting information to the operator(s). Smart Stick, E-Mode, Arc Force are just some of the features of the DLW330X2 from Multiquip.

  • Delivers up to 340 amps as a welder with the convenience of 10.5 kW of AC power as a generator
  • Dual operator output ability
  • Can draw simultaneous AC power while welding
  • Amazing voltage regulation at 1.5 percent (+/-)
  • Tier 4 final Kubota diesel - Model D902
  • Arc Force control allows the operator to fine tune DC current during low voltage welding conditions which helps in preventing electrodes froms sticking during short arc length welding
  • Smooth arc characteristics and more consistent, quality weld penetration
  • E-mode improves fuel efficiency by allowing one operator to weld up to 200 amps while the engine maintains idle speeds. Two operators can also use this feature when the total amperage between both outputs does not exceed 200 amps.
  • Smart Stick function automatically shuts the engine down during periods of no load. The operator only needs to tap the welding rod to the grounded work for the engine to restart, making restarts while in the rafters or hanging from the side of a skyscraper a breeze.
  • SMAW, FCAW, GMAW, GTAW and ACAC welding processes
  • Sound attenuated cabinet reduces noise output to 68 dBA at 23'
  • Full panel GFCI protection - OSHA and NEC compliant
  • Options - Wire remotes, welding cable, cable carriers, tool box, trailers and cold weather items are available for this model.
Specifications
DC Voltage CC: Single 31.2V, Dual 26.6 V CV: Single 28V, Dual 22.3 V
DC Current CC: Single 280, Dual 165 A CV: Single 280, Dual 165 A
Current Range Single 70-340, Dual 35-200 A
Max Duty Cycle
w/ Full Amps Availible
100 percent  at Single 280, Dual 165 A
Welding Processes SMAW
FCAW
MGAW
GTAW
ACAC
Fuel Tank Capacity 9.5 gal 36 L
Fuel Consumption
at Rated Load
1.1 gph
Overall Length 50.78 in 1290 mm
Overall Width 26.77 in 680 mm
Overall Height 33.07 in 840 mm
Operating Weight 983 lb 446 kg
Shipping Weight 892.87 lb 405 kg
AC Power Output
(Single Phase)
10.5 kW
Cycle 60 Hz
Voltage 120/240 V
Amperage 87.6/43.8 A
Voltage Regulation 1.5 percent
Receptacles NEMA 5-20R 125V GFCI 20A
NEMA L5-30R 125V Twist-Lock 30A
NEMA L6-30R 250V Twist-Lock 30A
CS-6369 125/250VAC Twist-Lock 50A
**TRLR-MPXF has a built in 28 gal. fuel cell
Notice: Features and equipment specifications are subject to change without notice.

 

DAW500SA4

500 amp Welder, 3KW, 120/240V Gen, T4F Kubota

The DAW500SA4 is a powerhouse for CC (constant current) and CV (constant voltage) welding applications. Delivering up to 500 amps during operation. As a generator, this unit provides up to 3 kW of clean, 120/240 AC power. This model is ideal for very large projects that demand high current for penetration when welding or for carbon cutting. Equipped with Kubota's Tier 4 final D1803 which provides long service life, making this unit a perfect choice for professional welder.

  • 500 amp DC output and 3 kW AC
  • CC and CV welding capabilities
  • Voltage regulation is maintained at = \ - 10 percent
  • Showcases a clean burning Tier 4 final EPA-approved Kubota diesel engine 
  • Electric-start, Lifting bail, external oil/fuel drains come as standard features
  • SMAW, FCAW, GMAW, GTAW and ACAC welding processes
  • Sound attenuated cabinet reduces noise output to 74 dBA at 23'
  • Full panel GFCI protection - OSHA and NEC compliant
  • Options - Wire remotes, welding cable, cable carriers, tool box and trailers are available for this model.
Specifications
DC Voltage CC: 38 V CV: 16-40 V
DC Current CC: 500 A CV: 500 A
Current Range 40-500 A
Max Duty Cycle w/ Full Amps Availible 100 percent at 350 A
Welding Processes SMAW
FCAW
GMAW
GTAW
ACAC
Fuel Tank Capacity 12 gal  
Fuel Consumption at Rated Load 1.3 gph
Overall Length 52 in 1330 mm
Overall Width 32 in 800 mm
Overall Height 36 in 1130 mm
Operating Weight 1302 lb 591 kg
Shipping Weight 1175 lb 533 kg
AC Power Output (Single Phase) 3 kW
Cycle 50/60 Hz
Voltage 120 V
Amperage 25 A
Voltage Regulation 7 percent
Receptacles NEMA 5-20R 125V GFCI 20A
NEMA L5-30R 125V Twist-Lock 30A
**TRLR-MPXF has a built in 28 gal. fuel cell
Notice: Features and equipment specifications are subject to change without notice.

 

DLW500ESA4 500 amp Welder, 14kW, 120/240V, T4F Isuzu

DLW500ESA4

500 amp Welder, 14kW, 120/240V, T4F Isuzu

This CC (constant current) and CV (constant voltage) welder delivers up to 500 amps during single operation, or 250 amps to both outputs during dual operation. As a generator, this unit provides up to 14 kW of clean, 120/240 AC power. A digital panel display provides both amperage/voltage and troubleshooting information to the operator(s). Smart Stick, E-Mode, Arc Force, 14 Pin interfacing connections are just some of the features of the DLW500ESA4 from Multiquip.

  • Delivers up to 500 amps as a welder with the convenience of 14 kW of AC power as a generator
  • Dual operator output ability
  • Can draw simultaneous AC power while welding
  • Amazing voltage regulation at 1.5 percent (+/-)
  • Tier 4 final Isuzu diesel - Model 4LE2T
  • Arc Force control allows the operator to fine tune DC current during low voltage welding conditions which helps in preventing electrodes froms sticking during short arc length welding
  • Smooth arc characteristics and more consistent, quality weld penetration
  • E-mode improves fuel efficiency by allowing one operator to weld up to 280 amps while the engine maintains idle speeds. Two operators can also use this feature when the total amperage between both outputs does not exceed 180 amps.
  • Smart Stick function automatically shuts the engine down during periods of no load. The operator only needs to tap the welding rod to the grounded work for the engine to restart, making restarts while in the rafters or hanging from the side of a skyscraper a breeze.
  • SMAW, FCAW, GMAW, GTAW and ACAC welding processes
  • Sound attenuated cabinet reduces noise output to 65 dBA at 23'
  • Full panel GFCI protection - OSHA and NEC compliant
  • Options - Wire remotes, welding cable, cable carriers, tool box, trailers and cold weather items are available for this model.
Specifications
DC Voltage CC: Single 38V, Dual 30V V CV: Single 36.5V, Dual 26.5V V
DC Current CC: Single 450, Dual 250 A CV: Single 450, Dual 250 A
Current Range Single 30-500, Dual 30-280 A
Max Duty Cycle w/ Full Amps Availible 100% @Single 450, Dual 180 A
Welding Processes SMAW
FCAW
GMAW
GTAW
ACAC
Fuel Tank Capacity 17.7 gal 67 L
Fuel Consumption at Rated Load 1.59 gph
Overall Length 80 in 2035 mm
Overall Width 33 in 830 mm
Overall Height 45 in 1130 mm
Shipping Dimensions 80 x 33 x 45 in 2035 x 830 x 1130 mm
Operating Weight 2148 lb 975 kg
Shipping Weight 1960 lb 890 kg
AC Power Output (Single Phase) 14 kW
Cycle 60 Hz
Voltage 120/240 V
Amperage 58.3 x2 / 58.3 A
Voltage Regulation 1.5 percent
Receptacles NEMA 5-20R 125V GFCI 20A
NEMA L5-30R 125V Twist-Lock 30A
NEMA L6-30R 250V Twist-Lock 30A
CS-6369 125/250VAC Twist-Lock 50A
**TRLR-MPXF has a built in 28 gal. fuel cell
Notice: Features and equipment specifications are subject to change without notice.
TRLR502XF (H/E) Trailer Specifications
Gross Vehicle Weight Rating (GVWR) 6,000 lb 2,722 kg
Gross Axle Weight Rating (GAWR) (ea.) 3,500 each lb 1,588 kg
Coupler Rating 3 in. Pintle Eye - 20,000 lb (9,072 kg); 2 in. Ball Coupler - 6,000 lb (2,722 kg); 2-5/16 in. Ball Coupler - 14,000 lb (6,350 kg)
Tire Size ST205/75D14 LR-C
Tire Load Rating (ea.) 1,760 lb 657 kg
Wheel Bolt Pattern 5 Lug on 4.5 in
Fuel Tank Capacity 80 gal 303 L
Fits MQ Power Generator Models DLW500ESA4
Overall Length 152.99 in 3,885.95 mm
Overall Width 45.25 in 1,149 mm
Overall Height 24.98 in 634.5 mm
With Fuel 1,593 lb 723 kg
Without Fuel 1,025 lb 465 kg

 

SDW225SSA1
WELDER 225A 6KWTIER 4F GFCI
CALL 800-458-3687 FOR A FREIGHT QUOTE AND AVAILABILITY
Mfg. item #: SDW225SSA1
MULSDW225SSA1
lease to own for as little as:$157 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$7,861.90

16
SDW225SSAWR
Mfg. item #: SDW225SSAWR
MULSDW225SSAWR
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.11
Call for Price

105
SDW225AT10W
Mfg. item #: SDW225AT10W
MULSDW225AT10W
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

105
DLW300ESA1
WELDER 300A 10.5KWTIER 4F GFCI
CALL 800-458-3687 FOR A FREIGHT QUOTE AND AVAILABILITY
Mfg. item #: DLW300ESA1
MULDLW300ESA1
lease to own for as little as:$235 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$11,765.26

16
DLW300ESAWR
WELDER 300A W/10.5KW TIER4 W/REMOTE** CALL 800-458-3687 FOR CURRENT PRICING & AVAILABILITY
Mfg. item #: DLW300ESAWR
MULDLW300ESAWR
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

105
DLW330X2
WELDER 340A DUAL10.5KW TIER 4 GFCI
CALL 800-458-3687 FOR A FREIGHT QUOTE AND AVAILABILITY
Mfg. item #: DLW330X2
MULDLW330X2
lease to own for as little as:$260 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$12,992.82

16
DLW330X2WR
WELDER 340A W/10.5KW INT TIER 4 W/R** CALL 800-458-3687 FOR CURRENT PRICING & AVAILABILITY
Mfg. item #: DLW330X2WR
MULDLW330X2WR
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

105
DLW400ESA4
WELDER 400A DUAL 14KW TIER 4F GFCI
CALL 800-458-3687 FOR A FREIGHT QUOTE AND AVAILABILITY
Mfg. item #: DLW400ESA4
MULDLW400ESA4
lease to own for as little as:$285 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$14,241.07

16
DAW500SA4
WELDER 500A3KW GFCITIER 4F
CALL 800-458-3687 FOR A FREIGHT QUOTE AND AVAILABILITY
Mfg. item #: DAW500SA4
MULDAW500SA4
lease to own for as little as:$414 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$20,682.30

16
Call for price. MULDLW500ESA4
TRLR10W
TRAILER DA DAC SDW** CALL 800-458-3687 FOR CURRENT PRICING & AVAILABILITY
Mfg. item #: TRLR10W
MULTRLR10W
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
Call for Price

105
WKT225A
WHEEL KIT DA DAC SDW
Mfg. item #: WKT225A
MULWKT225A
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$372.86

16
Copyright © 2022 Smith-Hamilton, Inc
0.010 220517 07:36