chat now with southern tool
Technical Sales 1–800–458–3687

MultiQuip SDW225A Diesel-Powered Welder


225 amp Welder, 6KW, 120/240V Gen
This model delivers up to 225 amps of DC welding power in CC (constant current) or CV (constant voltage) mode. As a generator it provides up to 6kW of 120/240 volt AC power. This unit can be simultaneously used as welder and generator.
  • Suits SMAW, FCAW, GMAW, GTAW and ACAC welding processes
  • Operates as a 6kW generator and 225-amp welder
  • Powered by a 12.3-hp Kubota Z482 diesel engine
  • Brushless machine with a weather-resistant housing
  • Regulates voltage at 2 percent
  • Low noise level of only 68.7dBA
  • Also available in light tower configuration as model MLTSDW7
  • Full instrumentation including controls for both CC and CV
  • Tier 4 Kubota diesel engine Z482
  • SDW225AT10W - Trailer TRLRTMP mounted
  • SDW225SSAWR - Remote control allows operator to work 100 feet (30.5 meters) from the welder
Specifications
DC Voltage CC: 28 V CV: 15-28 V
DC Current CC: 225 A CV: 225 A
Current Range 50-225 A
Max Duty Cycle
w/ Full Amps Availible
100 percent at 200 A
Welding Processes SMAW
FCAW
GMAW
GTAW
ACAC
Fuel Tank Capacity 6.6 gal 30 L
Fuel Consumption
at Rated Load
0.6 gph
Overall Length 45 in 114 cm
Overall Width 26 in 66 cm
Overall Height 31 in 80 cm
Shipping Dimensions 46 x 26 x 36 in 116.8 x 66 x 91.44 cm
Operating Weight 671 lb 305 kg
Shipping Weight 689 lb 313 kg
AC Power Output
(Single Phase)
6 kW
Cycle 50/60 Hz
Voltage 120/240 V
Amperage 50/25 A
Voltage Regulation 2 percent
Receptacles NEMA 5-20R 125V GFCI 20A
NEMA L5-30R 125V Twist-Lock 30A
NEMA L14-30R 125/250V Twist-Lock 30A
* Requires Adapter kit, **TRLR-MPXF has a built in 28 gal. fuel cell
Notice: Features and equipment specifications are subject to change without notice.

 

 

MultiQuip DLW300ATMPXF Diesel-Powered Welder-Generators
The 300 amp Welder, 10.5KW, 120/240V Gen  welder/generator delivers superior arc characterisitcs and consistent welding quality. It is the quietest welder in the industry with only 59 dBA at 23 feet (6.9 meters). The new E-mode feature improves fuel effciency by allowing the operator to weld at idle up to 160 amps, reducing operating costs and noise levels.
  • Voltage regulation is maintained at 1.5 percent
  • Emits 65dBA at 23 feet (6.9 meters)
  • Produces up to 300 amps as a welder, 10.5 kW as a generator
  • Arc force control allows the operator to fine tune DC current during low voltage welding conditions and helps prevent electrodes froms sticking during short arc length welding
  • Safety shutdowns, lifting bale, and external water, oil and fuel drains
  • E-mode allows you to weld at 160 amps at idle
  • Tier 4 Kubota diesel engine D722
  • DLW300ESAWR - remote control allows the operator to adjust amperage up to 100 feet (30.5 meters) from the machine
  • DLW300AT10W - Trailer TRLR-10W mounted
  • DLW300TMP - Trailer TRLRMP mounted
  • DLW300ATMPXF - Trailer TRLRMP mounted w/ 30 gal. fuel cell
Specifications
DC Voltage CC: 31 V
DC Current CC: 300A
Current Range 35-300 A
Max Duty Cycle
w/ Full Amps Availible
100 percent at 280 A
Welding Processes SMAW
FCAW
GTAW
ACAC
Fuel Tank Capacity 9.5 gal 36 L
Fuel Consumption
at Rated Load
0.66 gph
Overall Length 50.75 in 129 cm
Overall Width 26.75 in 68 cm
Overall Height 33.1 in 84 cm
Shipping Dimensions 53 x 30 x 38 in 134.5 x 76 x 95.6 cm
Operating Weight 849 lb 386 kg
Shipping Weight 896 lb 407 kg
AC Power Output
(Single Phase)
10.5 kW
Cycle 50/60 Hz
Voltage 120/240 V
Amperage 87/44 A
Voltage Regulation 1.5 percent
Receptacles NEMA 5-20R 125V GFCI 20A
NEMA L5-30R 125V Twist-Lock 30A
NEMA L6-30R 250V Twist-Lock 30A
CS-6369 125/250VAC Twist-Lock 50A
**TRLR-MPXF has a built in 28 gal. fuel cell
Notice: Features and equipment specifications are subject to change without notice.

 

MultiQuip DLW400ATMP Diesel-Powered Welder - Generators
400 amp Welder, 14kW, 120/240V Gen
This CC (constant current) and CV (constant voltage) welder delivers up to 400 amps of operation for one man, or simultaneous two man operation with 200 amps of output per person. As a generator it provides up to 14kW of 120/240 volt AC power. A digital display provides amperage/voltage and troubleshooting error code information to the operator. In E-mode the unit can weld up o 240 amps at idle speed to optimize fuel economy. Additionally, this unit can be simultaneously used as a welder and generator. Low noise levels of only 67.5dBA.
  • Draws simultaneous AC power while welding 
  • The convenience of one-man or two man operation   
  • Delivers up to 400 amps as a welder, 14kW of AC power
  • Arc force control allows the operator to fine tune DC current during low voltage welding conditions and helps prevent electrodes froms sticking during short arc length welding
  • Smooth arc characteristics and more consistent, quality welds
  • Super clean volage regulion 1.5 percent (+/-)
  • Tier 4 Kubota diesel engine V1305
  • E-mode improves fuel efficiency by allowing operator to weld at idle up to 240 amps
  • Noise level produces only 67.5 dBA
  • DLW400ATMP - Trailer TRLRTMP mounted
  • DLW400ATMPXF - Trailer TRLRMP mounted w/ 30 gal. fuel cell
  • DLW400ESAWR - Remote control allow operator to work 100 feet (30.5 meters) from the welder
Specifications
DC Voltage CC: 34, 2 x 27cc V
DC Current CC: 400cc, 2 x 200ccA
Current Range 70-400, 2x35-200 A
Max Duty Cycle
w/ Full Amps Availible
100 percent at 350, 2 x 175 A
Welding Processes SMAW
FCAW
GTAW
ACAC
Fuel Tank Capacity 11.1 gal 42 L
Fuel Consumption
at Rated Load
1.5 gph
Overall Length 61 in 155 cm
Overall Width 29 in 74 cm
Overall Height 35 in 89 cm
Shipping Dimensions 63 x 30 x 41 in 160 x 76.2 x 104 cm
Operating Weight 1090 lb 495 kg
Shipping Weight 1112 lb 505 kg
AC Power Output
(Single Phase)
14 kW
Cycle 50/60 Hz
Voltage 120/240 V
Amperage 116/58 A
Voltage Regulation 1.5 percent
Receptacles NEMA 5-20R 125V GFCI 20A
NEMA L5-30R 125V Twist-Lock 30A
NEMA L6-30R 250V Twist-Lock 30A
CS-6369 125/250VAC Twist-Lock 50A
**TRLR-MPXF has a built in 28 gal. fuel cell
Notice: Features and equipment specifications are subject to change without notice.

 

340 amp Welder, 10.5 KW 120/240V Gen
This CC (Constant Curent) and CV (Constant Voltage) welder delivers up to 340 amps of operation for one man, or simultaneous two man operation with 200 amps of output per operator. Additionally, it provides up to 10.5 kW of 120/240 volt AC power. A digital display provides both amperage/voltage and troubleshooting error code information to the operator. In e-mode the unit can weld at idle speed to optimize fuel economy. Low noise level of only 61.3dBA. This is the welder that gives you more spark for your arc.

The SmartStick sensor automatically shuts off the engine during periods of no load and restarts it when the operator strikes the welding rod. The variable sensor - adjustable from one to 30 minutes - enables the operator to select the optimum working conditions and reduce fuel consumption.
 
  • The convenience of one man -man or two-man opeation
  • Independent controls and up to 200 amps for each operator or 340 amps for one operator
  • E-mode improves fuel efficiency by allowing the operator to weld with the engine at idle speed at up to 200 amps
  • Arc Force Control allows the operator to fine tune DC current during low voltage welding conditions and helps prevent electrodes from sticking during short arc length welding
  • Super clean voltage regulation 1.5 percent (+/-)
  • Smart Stick sensor to automatically shut off the engine during periods of no load and restart when operator strikes the welding rod
Specifications
DC Voltage CC: 31.2, 2 x 26.6CC V
DC Current CC: 280, 2 x 165 A CV: 280, 2 x 165 A
Current Range 70-340, 2x35-200 A
Max Duty Cycle
w/ Full Amps Availible
100 percent at 280, 2 x 165 A
Welding Processes SMAW
FCAW
GTAW
ACAC
Fuel Tank Capacity 9.5 gal 36 L
Fuel Consumption
at Rated Load
1.1 gph
Overall Length 50.8 in 129 cm
Overall Width 26.8 in 68 cm
Overall Height 33.1 in 84 cm
Operating Weight 893 lb 446 kg
AC Power Output
(Single Phase)
10.5 kW
Cycle 60 Hz
Voltage 120/240 V
Amperage 87.6/43.8 A
Voltage Regulation 1.5 percent
Receptacles NEMA 5-20R 125V GFCI 20A
NEMA L5-30R 125V Twist-Lock 30A
NEMA L6-30R 250V Twist-Lock 30A
CS-6369 125/250VAC Twist-Lock 50A
**TRLR-MPXF has a built in 28 gal. fuel cell
Notice: Features and equipment specifications are subject to change without notice.

 

500 amp Welder, 3KW, 120/240V Gen
This CC (constant current), CV (constant voltage) welder delivers up to 500 amps of DC welding output. As a generator it provides up to 3kW of 120/240 volt AC power. Additionally, this unit can be simultaneously used as a welder and generator.
  • CC and CV welding capability
  • Electric-start, gasoline-powered
  • Excels in SMAW, FCAW, GMAW, GTAW and ACAC welding processes
  • External oil and fuel drains, and several automatic safety shutdowns
  • Tier 4 interim Kubota D-1803 diesel engine
  • DAW500ATMPXF - Trailer TRLRTMP mounted w/ extra fuel cell
Specifications
DC Voltage CC: 38 V CV: 16-40 V
DC Current CC: 500 A CV: 500 A
Current Range 40-500 A
Max Duty Cycle w/ Full Amps Availible 100 percent at 350 A
Welding Processes SMAW
FCAW
GMAW
GTAW
ACAC
Fuel Tank Capacity 28 gal 106 L
Fuel Consumption at Rated Load 1.3 gph
Overall Length 53 in 134.62 cm
Overall Width 32 in 81.28 cm
Overall Height 36 in 91.44 cm
Operating Weight 1069 lb 485 kg
AC Power Output (Single Phase) 3 kW
Cycle 50/60 Hz
Voltage 120 V
Amperage 25 A
Voltage Regulation 7 percent
Receptacles NEMA 5-20R 125V GFCI 20A
NEMA L5-30R 125V Twist-Lock 30A
**TRLR-MPXF has a built in 28 gal. fuel cell
Notice: Features and equipment specifications are subject to change without notice.

 

Welder-Generators - Gas
SDW225SSA1 Welder-Generators - Diesel - - Welder 225A w/6kW, Tier4, GFCI
SDW225SSAWR Welder-Generators - Diesel - - Welder 225A w/6kW, Tier4 w/remote
SDW225AT10W Welder-Generators - Diesel - - Welder 225A w/6kW, Tier4, w/TRLR10W
DLW300ESA1 Welder-Generators - Diesel - - Welder 300A w/10.5kW, Tier4, GFCI
DLW300ESAWR Welder-Generators - Diesel - - Welder 300A w/10.5kW Tier4 w/remote
DLW330X2 Welder-Generators - Diesel - - Welder 340A w/10.5kW Tier4
DLW330X2WR Welder-Generators - Diesel - - Welder 340A w/10.5kw int Tier 4 w/remote
DLW400ESA4 Welder-Generators - Diesel - - Welder 400A, AC 12kW w/GFCI,Tier 4 Final
DAW500SA4 Welder-Generators - Diesel - - Welder 500A, AC 3kW w/GFCI, Tier 4 final
Accessories
TRLR10W Trailer for SDW, SGW, TLW, DA7000SS
WKT225A Wheel Kit for SDW Welders, DA7000SS Generator

 

SDW225SSA1
WELDER 225A W/6KW TIER4 GFCI** STATE SALES TAX MIGHT BE COLLECTED ON THIS ITEM IN SOME STATES.
Mfg. item #: SDW225SSA1
MULSDW225SSA1
lease to own for as little as:$163 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$8,171.52

81
SDW225SSAWR
Mfg. item #: SDW225SSAWR
MULSDW225SSAWR
lease to own for as little as:$181 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.11
$9,037.20

1448
SDW225AT10W
Mfg. item #: SDW225AT10W
MULSDW225AT10W
lease to own for as little as:$187 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$9,350.40

1448
DLW300ESA1
WELDER 300A W/10.5KW TIER4 GFCI** STATE SALES TAX MIGHT BE COLLECTED ON THIS ITEM IN SOME STATES.
Mfg. item #: DLW300ESA1
MULDLW300ESA1
lease to own for as little as:$237 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$11,846.82

81
DLW300ESAWR
WELDER-GENERATORS - DIESEL - - WELDER 300A W/10.5KW TIER4 W/REMOTE
Mfg. item #: DLW300ESAWR
MULDLW300ESAWR
lease to own for as little as:$248 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$12,399.74

1448
DLW330X2
WELDER 340A DUAL 10.5KW TIER 4 GFCI ** STATE SALES TAX MIGHT BE COLLECTED ON THIS ITEM IN SOME STATES.
Mfg. item #: DLW330X2
MULDLW330X2
lease to own for as little as:$262 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$13,081.33

81
DLW330X2WR
WELDER 340A W/10.5KW INT TIER 4 W/REMOTE
Mfg. item #: DLW330X2WR
MULDLW330X2WR
lease to own for as little as:$276 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$13,820.16

1005
DLW400ESA4
WELDER 400A DUAL 14KW TIER 4 GFCI** STATE SALES TAX MIGHT BE COLLECTED ON THIS ITEM IN SOME STATES.
Mfg. item #: DLW400ESA4
MULDLW400ESA4
lease to own for as little as:$279 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$13,944.00

81
DAW500SA4
WELDER 500A AC 3KW W/GFCI TIER 4 FINAL ** STATE SALES TAX MIGHT BE COLLECTED ON THIS ITEM IN SOME STATES.
Mfg. item #: DAW500SA4
MULDAW500SA4
lease to own for as little as:$416 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$20,823.04

81
TRLR10W
TRAILER MULTIPURPOSE NO FUEL TANK** STATE SALES TAX MIGHT BE COLLECTED ON THIS ITEM IN SOME STATES.
Mfg. item #: TRLR10W
MULTRLR10W
FREE shipping when ordered with a machine from this manufacturer.20
$1,169.76

81
WKT225A
WHEEL KIT DA/DAC GEN SDW WELDER** STATE SALES TAX MIGHT BE COLLECTED ON THIS ITEM IN SOME STATES.
Mfg. item #: WKT225A
MULWKT225A
FREE shipping when ordered with a machine from this manufacturer.20
$405.23

81
Copyright © 2018 Smith-Hamilton, Inc
0.009 150419 18:39