Technical Sales 1–800–458–3687

Teknatool Nova Chuck Jaws and Inserts

Key Features of All NOVA Chuck Accessories:

  • System compatibility  Jaw fixing profile is compatible across all NOVA Chucks and accessories.
  • Special Wood Turning Dovetail Profile  especially designed by Wood Turners so that the jaws will cut into the wood, grip firmly in the contraction mode and provide high tear out strength.
  • 2-Year Warranty
  • Comprehensive Instruction manual included 

s-h alt

 

Features standard on all NOVA Jaws:

Full Cross Function:s-h alt

Only NOVA Chucks give you the same jaw fixing system and same insert/adaptor system across all chuck models.

This means all accessory jaws in the range fit all the chucks in the range, including older chuck models*, giving you the ultimate flexibility. In buying a NOVA chuck, you can be confident that whether you want to move up or down the range, any accessories you have invested in will Fit.

 

Special Dovetail Profile:s-h alt

NOVA chucks have been especially designed so the jaws will cut into the wood, grip firmly in the contraction mode and provide high tear out strength.

Some chucks use an engineering jaw profile (designed to hold a hard material like steel) or rounded profiles, which just crush the wood fibres without digging in and holding securely.

 

NOVA PEN PLUS JAW SET
Code: 6034

One of our most popular new released jaw sets yet, this versatile accessory for your NOVA chuck will quickly become a favorite. 
s-h alt 

The new NOVA Pen Plus Jaws easily convert your NOVA chuck into a fast and accurate Pen Blank drilling facility.  The big jaw profile provides a vibration free, solid grip for all sizes of pen blanks and an accurate centered hole every time.  Being able to finely control the drill feed on the lathe is a big advantage to prevent break out on those delicate pen walls.  Also perfect for squaring up the pen blank ends after gluing in the pen kit tubes.

These unique jaws are designed especially to hold pen blanks for drilling.  But there a lot more to them than that their solid, heavy duty design means not only will they hold Pen blanks securely, but they are also powerful enough to handle larger and longer spigot work (the in Pen Plus!) . These heavy duty jaws secured by two screws for each jaw segment have an internal profile to accept square turning blanks.  With a rock solid grip over 1-1/2 inch long these  jaws can handle larger squares and rounds with ease and minimal vibration. Also perfect for squaring up the pen blank ends after gluing in the pen kit tubes.

This is truly a versatile jaw that will quickly become one of your favorites.  

s-h alt

Sizes:  

  • Square  (Contracting) Grip :  From  0.3937 inch up  to  over  1 inch.  Length of turnings from jaws up to 9 inch
  • Rounds (Contracting ) Grip:  From under 1/2 inch (actual: 0.4561 inch) up to over 3/4 inch.  Length of turnings from jaws up to 10 inch
  • Rounds (Expanding) Grip:  From 1.37 inch up to over 2.5 inch.  Length of turnings from jaws, up to 10 inch
  • These unique jaws are designed especially to hold pen blanks for drilling.  But their solid, heavy duty design means not only will they hold Pen blanks securely, but they are also powerful enough to handle larger and longer spigot work (the Plus in Pen Plus!) 
  • These Pen Plus jaws open up a new world of square turning projects.  You can do square lidded boxes, square finnials, hollow form turning such as peppermills and much more.

 

Features/Benefits:

  • Solid, long design means the Pen Blank is gripped firmly without movement drill your pen blanks accurately and cleanly
  • Fast to use, way faster than using a drill press
  • Plus factor hold long square stock firmly and accurately for wider project use beyond just pens
  • Fits on all NOVA chucks
  • Super convenient for small run pen making all operations are based around the lathe
  • 2 Year Warranty
  • Comprehensive instruction manual included 
  • This is a two piece jaw set. 

Our testers have loved it: 

Also you have much better control of the feed so you don't destroy your blank. It can even handle drilling blanks that are not quite square something that darn near impossible with a drill press.

Using the Pen Plus jaws for drilling pen blanks is just magic!  They drilled a dead accurate hole every time during my tests.  I could also use them to  square up the blank ends after gluing in the tubes, as well as gripping the blanks securely for any other task you might need.

Wow! I could believe the rock solid grip it gave me with a 1/2 inch square turning over 10 inch long. I was able to do shaping and hollowing right out the end very impressive!

To operate:

Simply mount a drill chuck into the tail stock of your lathe and slide up the drill bit to the pen blank mounted in the NOVA Pen Plus Jaws. Lock down the tail stock and wind and drill out the hole to take the brass tube. Being mounted on a lathe the turner has more control over motor speed and a much better control of the feed speed. 

NOVA Mini Jaws Package
Code: 6027

s-h alt

NOVA Mini jaws set is designed to enrich NOVA jaw offering in mini turning area. This package consists of 4 types of jaws: NOVA 20mm jaw, NOVA Mini Spigot jaw, NOVA Mini Step Jaw and NOVA 70mm jaw, .

They are ideal to use on NOVA Midi chuck for midi/mini work. These jaws can also be purchased individually at some retailers and online.

Features and Benefits:

  • A great range of smaller projects can be mounted and turned using either  the expansion mode (mostly for bowls) or the contraction mode (mostly for spigots)
  • Made from medium tensile carbon K1045 steel to provide maximum structural strength.
  • Standard Woodworm Screw can be used with these jaws
  • 2 year warranty
  • Able to be used on all Teknatool Chucks in the range. For more on this, see below.

Jaw Travel Range Table  

Imperial
Jaw Set and Chuck Suitability Expanding Action Specifications Contracting Action Specifications
Jaw Set Suitable Chuck Square Stock Spigot Mode
Min Max Min Max Min Max
Mini 20mm Jaws Precision Midi* 0.79 1.63 0.39 0.79 0.32 1.18
Nova G3 0.79 1.63 0.39 0.79 0.32 1.18
SuperNova2 0.79 1.63 0.39 0.79 0.32 1.18
Titan 0.79 2 0.39 1.18 0.32 1.57
Mini Spigot Jaws Precision Midi* 1 1.77 0.39 1.22 0.32 1.18
Nova G3 1 1.77 0.39 1.22 0.32 1.18
SuperNova2 1 1.77 0.39 1.22 0.32 1.18
Titan 1 2.16 0.39 1.61 0.32 1.57
Mini Step JAW Precision Midi Step 1 1.06 1.93 Not Applicable Not Applicable
Precision Midi Step 2 1.45 2.28 0.36 1.1 0.41 1.24
Nova G3 Step1 1.06 1.93 Not Applicable Not Applicable
Nova G3 Step2 1.45 2.28 0.36 1.1 0.41 1.24
SN2 Step 1 1.06 1.93 Not Applicable Not Applicable
SN2 Step 2 1.45 2.28 0.36 1.1 0.41 1.24
Titan Step1 1.06 2.32 Not Applicable Not Applicable
Titan Step2 1.45 2.72 0.36 1.5 0.41 1.63
70mm Jaws Precision Midi* 2.76 3.54 1.46 2.56 2.2 3
Nova G3 2.76 3.54 1.46 2.56 2.2 3
SuperNova2 2.76 3.54 1.46 2.56 2.2 3
Titan 2.76 3.94 1.46 2.95 2.2 3.43
Metric
Jaw Set and Chuck Suitability Expanding Action Specifications Contracting Action Specifications
Jaw Set Suitable Chuck Square Stock Spigot Mode
Min Max Min Max Min Max
Mini 20mm Jaws Precision Midi* 20 41.5 10 20 8 30
Nova G3 20 41.5 10 20 8 30
SuperNova2 20 41.5 10 20 8 30
Titan 20 51.5 10 30 8 40
Mini Spigot Jaws Precision Midi* 25 45 10 31 8 30
Nova G3 25 45 10 31 8 30
SuperNova2 25 45 10 31 8 30
Titan 25 55 10 41 8 40
Mini Step JAW Precision Midi Step 1 27 49 Not Applicable Not Applicable
Precision Midi Step 2 37 58 9 28 10.5 31.5
Nova G3 Step1 27 49 Not Applicable Not Applicable
Nova G3 Step2 37 58 9 28 10.5 31.5
SN2 Step 1 27 49 Not Applicable Not Applicable
SN2 Step 2 37 58 9 28 10.5 31.5
Titan Step1 27 59 Not Applicable Not Applicable
Titan Step2 37 69 9 38 10.5 41.5
70mm Jaws Precision Midi* 70 90 37 65 56 77
Nova G3 70 90 37 65 56 77
SuperNova2 70 90 37 65 56 77
Titan 70 100 37 75 56 8

Please note, Tolerance of +/-1mm on all measurements

* Measurements with stop-screw

** Recommended with Caution

NOVA 25mm (1 inch) JAW SET
Code: JS25N

One of our most popular and convenient jaws for small bowl and small unsupported spigot turning work.  Designed for small bowl (expanding dovetail mounting up to 6 inch dia) and small spigot (contracting mode) free end turning work (up to 5 inch long). Idea for mini/midi lathe gripping work below size that can be handled by the Standard 50mm Jaws NOVA 25mm (1 inch) JAW SET

Features and Benefits:

  • Quick and easy to use for small bowls and small unsupported spigot work
  • A great range of smaller projects can be mounted and turned using either  the expansion mode (mostly for bowls) or the contraction mode (mostly for spigots)
  • Quick mounting makes them ideal for smaller projects
  • Multiple turned pieces (i.e. lace bobbins) can be turned from dowel stock
  • Made from medium tensile carbon K1045 steel to provide maximum structural strength.
  • Standard Woodworm Screw can be used with these jaws
  • 2 year warranty
  • Able to be used on all Teknatool Chucks in the range. For more on this, see below.

 

Jaw Travel Range Table  

Imperial
Jaw Set and Chuck Suitability Expanding Action Specifications Contracting Action Specifications
Jaw Set Suitable Chuck Square Stock Spigot Mode
Min Max Min Max Min Max
25mm  JAW Precision Midi 1.024 1.417 0.354 0.709 0.394 0.787
Nova G3 1.024 1.811 0.354 1.102 0.394 1.220
SuperNova2 1.024 1.811 0.354 1.102 0.394 1.220
Titan 1.024 2.205 0.354 1.496 0.394 1.614
Metric
Jaw Set & Chuck Suitability Expanding Action Specifications Contracting Action Specifications
Jaw Set Suitable Chuck Square Stock Spigot Mode
Min Max Min Max Min Max
25mm  JAW Precision Midi 26 36 9 18 10 20
Nova G3 26 46 9 28 10 31
SuperNova2 26 46 9 28 10 31
Titan 26 56 9 38 10 41


Please note, Tolerance of +/-1mm on all measurements

* Measurements with stop-screw

** Recommended with Caution

NOVA PIN JAW SET
Code: JSPIN

These special 25mm extended jaws are designed to act like a pin chuck - expanding into a pre-bored hole. 

s-h alt This is an especially useful technique for free form edge bowls. A real big advantage over Pin Chucks though is that you don't have to bore to an exact size - any size between the minimum and just under the maximum expansion will do. 

The longer jaws allow for a very powerful spigot grip for all smaller work like lace bobbins (up to 6 inch length) and delicate pots etc. The jaws also have a dovetail to mount small bowls (up to 6 inch dia).

NOVA PIN JAW SET

Jaw Travel Range Table  

Imperial (Inch)
Jaw Set and Chuck Suitability Expanding Action Specifications Contracting Action Specifications
Jaw Set Suitable Chuck Square Stock Spigot Mode
Min Max Min Max Min Max
PIN JAW Precision Midi* 1.024 1.378 0.276 0.669 0.394 0.748
Nova G3 1.024 1.811 0.276 1.102 0.394 1.220
SuperNova2 1.024 1.811 0.276 1.102 0.394 1.220
Titan 1.024 2.244 0.276 1.496 0.394 1.614
Metric (mm)
Jaw Set and Chuck Suitability Expanding Action Specifications Contracting Action Specifications
Jaw Set Suitable Chuck Square Stock Spigot Mode
Min Max Min Max Min Max
PIN JAW Precision Midi* 26 35 7 17 10 19
Nova G3 26 46 7 28 10 31
SuperNova2 26 46 7 28 10 31
Titan 26 57 7 38 10 41

Please note, Tolerance of +/-1mm on all measurements

* Measurements with stop-screw

** Recommended with Caution

NOVA 35mm Bowl Jaw set (1.35")
Code: 6019

The 35mm bowl jaws fit perfectly into the current jaw range, picking up a small gap left between the 25mm and the 50mm.

These jaws are perfect for small to medium sizes with maximum grip, provided by the dovetail.

NOVA 35mm Bowl Jaw set (1.35")

Jaw Travel Range Table  

Imperial (Inch)
Jaw Set and Chuck Suitability Expanding Action Specifications Contracting Action Specifications
Jaw Set Suitable Chuck Square Stock Spigot Mode
Min Max Min Max Min Max
35mm Bowl JAW Precision Midi* 1.496 1.850 0.315 0.709 0.394 0.748
Nova G3 1.496 2.323 0.315 1.142 0.394 1.220
SuperNova2 1.496 2.323 0.315 1.142 0.394 1.220
Titan 1.496 2.717 0.315 1.535 0.394 1.614
Metric (mm)
Jaw Set and Chuck Suitability Expanding Action Specifications Contracting Action Specifications
Jaw Set Suitable Chuck Square Stock Spigot Mode
Min Max Min Max Min Max
35mm Bowl JAW Precision Midi* 38 47 8 18 10 19
Nova G3 38 59 8 29 10 31
SuperNova2 38 59 8 29 10 31
Titan 38 69 8 39 10 41

Please note, Tolerance of +/-1mm on all measurements

* Measurements with stop-screw

** Recommended with Caution

NOVA 50mm (2 inch) JAW SET
Code: JS50N

These jaws are standard with all NOVA chuck standard versions (excluding Nova Titan, which has the PowerGrip Jaw as standard).

Versatile all round jaw to get you started, before moving on to more specialized jaws. Able to handle both bowl and spigot projects.

NOVA 50mm (2") JAW SET

Jaw Travel Range Table  

Imperial (Inch)
Jaw Set and Chuck Suitability Expanding Action Specifications Contracting Action Specifications
Jaw Set Suitable Chuck Square Stock Spigot Mode
Min Max Min Max Min Max
50mm JAW  Precision Midi* 2.008 2.402 1.220 1.614 1.654 2.047
Nova G3 2.008 2.835 1.220 2.047 1.654 2.520
SuperNova2 2.008 2.835 1.220 2.047 1.654 2.520
Titan 2.008 3.228 1.220 2.441 1.654 2.874
Metric (mm)
Jaw Set and Chuck Suitability Expanding Action Specifications Contracting Action Specifications
Jaw Set Suitable Chuck Square Stock Spigot Mode
Min Max Min Max Min Max
50mm JAW  Precision Midi* 51 61 31 41 42 52
Nova G3 51 72 31 52 42 64
SuperNova2 51 72 31 52 42 64
Titan 51 82 31 62 42 73

Please note, Tolerance of +/-1mm on all measurements

* Measurements with stop-screw

** Recommended with Caution

NOVA 75mm (3 inch) JAW SET
Code: 6014

NOVA 75mm (3") JAW SET
This jaw set is very versatile, has great holding power for large bowls and also moderate hollow forms.

Features and benefits

  • The dovetail walls are 3 x the thickness of conventional jaw types for rugged work holding for larger/heavier bo wl work.
  • Screws go right through the wall section to add more securing force where it’s needed most.
  • Deep smooth walled dovetail holds wood gently but very firmly.

Jaw Travel Range Table  

Imperial (Inch)
Jaw Set and Chuck Suitability Expanding Action Specifications Contracting Action Specifications
Jaw Set Suitable Chuck Square Stock Spigot Mode
Min Max Min Max Min Max
75mm BOWL JAW Precision Midi* Not Recommended Not Recommended Not Recommended
Nova G3** 3.189 4.016 1.339 2.165 1.831 2.657
SuperNova2 3.189 4.016 1.339 2.165 1.831 2.657
Titan 3.189 4.409 1.339 2.480 1.831 3.051
Metric (mm)
Jaw Set and Chuck Suitability Expanding Action Specifications Contracting Action Specifications
Jaw Set Suitable Chuck Square Stock Spigot Mode
Min Max Min Max Min Max
75mm BOWL JAW Precision Midi* Not Recommended Not Recommended Not Recommended
Nova G3 81 102 34 55 46.5 67.5
SuperNova2 81 102 34 55 46.5 67.5
Titan 81 112 34 63 46.5 77.5

Please note, Tolerance of +/-1mm on all measurements

* Measurements with stop-screw

** Recommended with Caution

NOVA 75mm Long Nosed Jaw set (3 inch)
Code: 6017

NOVA 75mm Long Nosed Jaw set (3")NOVA 75mm Long Nosed Jaw set (3")

This unique long nosed jaws set has a 50mm 2 inch rise above their mounting base means very long reach
deep inside of bowls.

Features and Benefits:

  • Tremendous holding power externally and internally – very versatile jaw.
  • Ideal for green wood turning.
  • Internal features dovetail grip for holding footed bo wls and other footed work pieces.
  • Internal powergrip for holding spigoted work pieces

 

Jaw Travel Range Table  

Imperial (Inch)

Jaw Set and Chuck Suitability Expanding Action Specifications Contracting Action Specifications
Jaw Set Suitable Chuck Square Stock Spigot Mode
Min Max Min Max Min Max
Long Nose JAW Precision Midi* Not Recommended Not Recommended Not Recommended
Nova G3 2.126 2.874 1.142 1.969 1.575 2.362
SuperNova2 2.126 2.874 1.142 1.969 1.575 2.362
Titan 2.126 3.346 1.142 2.402 1.575 2.835

Metric (mm)

Jaw Set and Chuck Suitability Expanding Action Specifications Contracting Action Specifications
Jaw Set Suitable Chuck Square Stock Spigot Mode
Min Max Min Max Min Max
Long Nose JAW Precision Midi* Not Recommended Not Recommended Not Recommended
Nova G3** 54 73 29 50 40 60
SuperNova2 54 73 29 50 40 60
Titan 54 85 29 61 40 72

Please note, Tolerance of +/-1mm on all measurements

* Measurements with stop-screw

** Recommended with Caution

 

NOVA Step Jaw Set
Code: JS75DT

These step jaws are designed primarily to grip in the contracting mode, the base (foot) of footed bowls.

The step sizes provide optimum gripping for three foot sizes with minimal crush damaged wood. There is also an expanding dovetail made for alternative recess gripping of bowls. Can hold bowls up to 12 inch in diameter

Optimum Step sizes: 

  • 42mm (1.65 inch)

  • 50mm (2 inch)

  • 64mm (2.5 inch)

NOVA Step Jaw Set

Jaw Travel Range Table  

Imperial (Inch)
Jaw Set and Chuck Suitability Expanding Action Specifications Contracting Action Specifications
Jaw Set Suitable Chuck Square Stock Spigot Mode
Min Max Min Max Min Max
STEP JAW Precision Midi* Not Recommended Not Recommended Not Recommended
Nova G3 Step 1 Not Applicable 1.181 2.008 1.634 2.461
Nova G3 Step 2 Not Applicable 1.417 2.244 1.988 2.815
Nova G3 Step 3 3.051 3.839 1.772 2.598 2.500 3.287
SN2 Step1 Not Applicable 1.181 2.008 1.634 2.461
SN2 Step2 Not Applicable 1.417 2.244 1.988 2.815
SN2 Step3 3.051 3.839 1.772 2.598 2.500 3.287
Titan Step1 Not Applicable 1.181 2.402 1.634 2.894
Titan Step2 Not Applicable 1.417 2.638 1.988 3.209
Titan Step3 3.051 4.272 1.772 2.992 2.500 3.681
Metric (mm)
Jaw Set and Chuck Suitability Expanding Action Specifications Contracting Action Specifications
Jaw Set Suitable Chuck Square Stock Spigot Mode
Min Max Min Max Min Max
STEP JAW Precision Midi* Not Recommended Not Recommended Not Recommended
Nova G3 Step1 Not Applicable 30 51 41.5 62.5
Nova G3 Step2 Not Applicable 36 57 50.5 71.5
Nova G3 Step3 77.5 97.5 45 66 63.5 83.5
SN2 Step 1 Not Applicable 30 51 41.5 62.5
SN2 Step 2 Not Applicable 36 57 50.5 71.5
SN2 Step 3 77.5 97.5 45 66 63.5 83.5
Titan Step1 Not Applicable 30 61 41.5 73.5
Titan Step2 Not Applicable 36 67 50.5 81.5
Titan Step3 77.5 108.5 45 76 63.5 93.5

Please note, Tolerance of +/-1mm on all measurements

* Measurements with stop-screw

** Recommended with Caution

NOVA  35mm (1.375 inch) and 45mm (1.8 inch) Spigot Jaw set
Code: JS-SP35 (35mm); JS- SP45 (45mm)

Specially designed to provide a strong grip both in the contracting (gripping round or square spigots) and in the expanding mode with up to 10 inch long work piece. NOVA 35mm (1.375") & 45mm (1.8") Spigot Jaw set

Features and Benefits

  • Ideal for long, unsupported hollow bo xes and vases. Their serrated tooth form makes for a very powerful grip that just wont let go.
  • 35mm (1.375 inch) Nova Spigot Jaw set can handle spigots up to 50mm (2 inch) and minimum down to 30mm (13/36 inch).
  • 45mm (1.8 inch) Nova Spigot Jaw set can handle spigots up to 60mm (2.38 inch) and minimum down to 38mm (1.5 inch).

 

Jaw Travel Range Table  

Imperial (Inch)
Jaw Set and Chuck Suitability Expanding Action Specifications Contracting Action Specifications
Jaw Set Suitable Chuck Square Stock Spigot Mode
Min Max Min Max Min Max
35mm SPIGOT JAW Precision Midi* 2.047 2.402 0.984 1.378 1.220 1.575
Nova G3 2.047 2.835 0.984 1.772 1.220 1.969
SuperNova2 2.047 2.835 0.984 1.772 1.220 1.969
Titan 2.047 3.268 0.984 2.165 1.220 2.362
45mm SPIGOT JAW Precision Midi* 2.047 2.402 1.220 1.575 1.614 1.969
Nova G3 2.047 2.835 1.220 2.008 1.614 2.402
SuperNova2 2.047 2.835 1.220 2.008 1.614 2.402
Titan 2.047 3.228 1.220 2.402 1.614 2.795
Metric (mm)
Jaw Set and Chuck Suitability Expanding Action Specifications Contracting Action Specifications
Jaw Set Suitable Chuck Square Stock Spigot Mode
Min Max Min Max Min Max
35mm SPIGOT JAW Precision Midi* 52 61 25 35 31 40
Nova G3 52 72 25 45 31 50
SuperNova2 52 72 25 45 31 50
Titan 52 83 25 55 31 60
45mm SPIGOT JAW Precision Midi* 52 61 31 40 41 50
Nova G3 52 72 31 51 41 61
SuperNova2 52 72 31 51 41 61
Titan 52 82 31 61 41 71

Please note, Tolerance of +/-1mm on all measurements

* Measurements with stop-screw

** Recommended with Caution

NOVA 100mm (4 inch) JAW SET
Code: JS100N

The 100mm jaw sets are designed for an expanded dovetail grip (up to 14 inch dia), reverse dovetail grip for gripping footed bowls, limited spigot facility (up to 6 inch long) and provision to mount false wooden jaws, so customised jaws can be made for special purposes. They are made for a larger range of work than the standard 50mm jaws or Step Jaws.

One of our most popular jaws to mount 12-14 inch bowls.

Can mount false wooden jaws, so customised jaws can be made for special purposes. 

NOVA 100mm (4") JAW SET

Jaw Travel Range Table  

Imperial (Inch)
Jaw Set & Chuck Suitability Expanding Action Specifications Contracting Action Specifications
Jaw Set Suitable Chuck Square Stock Spigot Mode
Min Max Min Max Min Max
100mm  JAW Precision Midi* Not Recommended Not Recommended Not Recommended
Nova G3 3.819 4.646 2.205 3.031 3.071 3.898
SuperNova2 3.819 4.646 2.205 3.031 3.071 3.898
Titan 3.819 5.039 2.205 3.425 3.071 4.291
Metric (mm)
Jaw Set and Chuck Suitability Expanding Action Specifications Contracting Action Specifications
Jaw Set Suitable Chuck Square Stock Spigot Mode
Min Max Min Max Min Max
100mm  JAW Precision Midi* Not Recommended Not Recommended Not Recommended
Nova G3 97 118 56 77 78 99
SuperNova2 97 118 56 77 78 99
Titan 97 128 56 87 78 109

Please note, Tolerance of +/-1mm on all measurements

* Measurements with stop-screw

** Recommended with Caution

NOVA 130mm (5 inch) JAW SET
Code: JS130N

NOVA 130mm (5") JAW SET

The big brother to the 100mm jaw set, for large work.

Can mount false wooden jaws, so customised jaws can be made for special purposes. (Require Fastenings)

Jaw Travel Range Table  

Imperial (Inch)
Jaw Set and Chuck Suitability Expanding Action Specifications Contracting Action Specifications
Jaw Set Suitable Chuck Square Stock Spigot Mode
Min Max Min Max Min Max
130mm  JAW Precision Midi* Not Recommended Not Recommended Not Recommended
Nova G3 Not Recommended Not Recommended Not Recommended
SuperNova2 5.000 5.787 3.031 3.819 4.213 5.039
Titan 5.000 6.181 3.031 4.213 4.213 5.433
Metric (mm)
Jaw Set and Chuck Suitability Expanding Action Specifications Contracting Action Specifications
Jaw Set Suitable Chuck Square Stock Spigot Mode
Min Max Min Max Min Max
130mm  JAW Precision Midi* Not Recommended Not Recommended Not Recommended
Nova G3 Not Recommended Not Recommended Not Recommended
SuperNova2 127 147 77 97 107 128
Titan 127 157 77 107 107 138

Please note, Tolerance of +/-1mm on all measurements

* Measurements with stop-screw

** Recommended with Caution

NOVA PowerGrip Jaw set
Code: PJSN

The most powerful jaw available for large spigot/hollow form turning on the SuperNova2.

s-h altAlso a multi purpose jaw for bowl turners and hollow form turners.

Dovetail sizes fit neatly between the 75mm (3 inch) and the 130mm (5 inch) Jumbo Jaw sets.

Included with all standard versions of the Nova Titan Chuck.

 
NOVA PowerGrip Jaw set

Jaw Travel Range Table  

Imperial (Inch)
Jaw Set and Chuck Suitability Expanding Action Specifications Contracting Action Specifications
Jaw Set Suitable Chuck Square Stock Spigot Mode
Min Max Min Max Min Max
POWERGRIP JAW Precision Midi* Not Recommended Not Recommended Not Recommended
Nova G3 Not Recommended Not Recommended Not Recommended
SuperNova2 3.740 4.567 2.165 2.992 3.031 3.858
Titan 3.740 4.961 2.165 3.386 3.031 4.252
Metric (mm)
Jaw Set and Chuck Suitability Expanding Action Specifications Contracting Action Specifications
Jaw Set Suitable Chuck Square Stock Spigot Mode
Min Max Min Max Min Max
POWERGRIP JAW Precision Midi* Not Recommended Not Recommended Not Recommended
Nova G3 Not Recommended Not Recommended Not Recommended
SuperNova2 95 116 55 76 77 98
Titan 95 126 55 86 77 108

Please note, Tolerance of +/-1mm on all measurements

* Measurements with stop-screw

** Recommended with Caution

NOVA Cole Jaw set and NOVA Mini Cole Jaw set
Code: JSCOLE -- Cole Jaw Set; 6006 -- Mini Cole Jaw Set

A versatile set designed for re-chucking of bowls to remove chuck marks, add decoration or to re-shape the bottoms of bowls that have already been turned.

Other Nova jaw sets can be fitted to the Cole Jaws making a combination jaw facility – expanding dovetail facility for mounting bowls/platters and a reverse dovetail for mounting footed bowls/platters.

NOVA Cole Jaw set & NOVA Mini Cole Jaw setMany advantages over traditional vacuum chucking. Customisable with false wooden jaws.

Standard Cole Jaws are suitable for lathes with minimum 12”/300mm swing diameter.

Mini Cole Jaws are suitable for lathes with a minimum 8”/203mm swing                                                    diameter.

New! Accessory Buffer Kit containing 2 different buffer profiles
NOVA Cole Jaw set & NOVA Mini Cole Jaw set

Features and Benefits

  • Fast, easy way to re-chuck bo wls
  • More cost effective than Vacuum Chucking
  • Fits all Teknatool Chucks
  • Holds Range of Bowl Sizes Safely
  • Other Jaws can be mounted
  • Exceptional Structural Strength
 

TIPS N TRICKS!

NOVA Cole Jaw set & NOVA Mini Cole Jaw setWhile traditionally these type of jaws are used in the compression mode - depending on the bowl shape, the jaws can be used to grip in either the contracting or expanding mode.

To ensure best grip, the bowl should have a positive or negative flair towards the edge of the bowl.

Try and avoid straight sided bowls where the grip will be less efficient. Best cutting technique is to have a cutting action with the chisel such that much of the force is directed towards the headstock, not across the face.

 

CUSTOMISING THE COLE JAW USING WOODEN JAWS

NOVA Cole Jaw set & NOVA Mini Cole Jaw setIf larger or heavier bowls need to be re-chucked, then the customer can make their own customised wooden jaws.

These should be fastened onto each jaw segment using two screw positions. The customer should give careful consideration into the type of holding situation that is required before false wooden jaws are made, to ensure adequate gripping is acheived.

Jaw segments can be made from Medium Density Fibreboard (MDF)

 

Jaw Travel Range Table  

Imperial (Inch)

Jaw Set and Chuck Suitability  External Bowl Grip Internal Bowl Grip
Jaw Set Suitable Chuck
Max Max
COLE  JAW Precision Midi* 8.661 ~ 11
Nova G3 9.291 ~ 11
SuperNova2 9.291 ~ 11
Titan 9.449  
MINI COLE JAW Precision Midi* 6.181 ~8.5
Nova G3 6.693 ~8.5
SuperNova2 6.693 ~8.5
Titan 7.087  

Metric (mm)

Jaw Set & Chuck Suitability  External Bowl Grip Internal Bowl Grip
Jaw Set Suitable Chuck
Max Max
COLE  JAW Precision Midi* 220 ~280
Nova G3 236 ~280
SuperNova2 236 ~280
Titan 240  
MINI COLE JAW Precision Midi* 157 ~215
Nova G3 170 ~215
SuperNova2 170 ~215
Titan 180  

Please note, Tolerance of +/-1mm on all measurements

* Measurements with stop-screw

** Recommended with Caution

 

NOVA Soft Jaw Set
Code: 6021

NOVA Soft Jaws Set are 4 segments of high quality soft nylon jaws which are able to be cut and customised by the user to their specific requirements. It is designed to allow woodturners make up a special set of jaws for a job and store them away with the jigs and templates for the project. NOVA Soft Jaw Set

Features and Benefits:

  • NOVA Soft Jaw SetEasy to use - The four segments of quality nylon can be turned to shape using standard tools. They can be turned, sawn, drilled or tapped.
  • Markless holding - Being made of nylon, they also hold most woods without marking.
  • Vibrant colour - The vibrant NOVA red colour makes it easy to see profiles. By machining the profile after mounting, you can eliminate any errors that may have added up from mounting the jaws to chuck then to the spindle.
  • Maximum holding - You can get full diameter holding on your specific work piece as you can turn out to the exact diameter required. 
  • Thick jaw body - user can profile any shape they wish limited only by the fastening heads which are embedded 22.5 mm from the face of the jaws. This gives the turner a great deal of flexibility in what they can do.

Product Technical Specification

  • Material: Nylon
  • Outer ring diameter when close: 120mm (4.7 inch)
  • Thickness: 27mm (1 inch)
  • Weight: 275g (whole set)

Tips when you customise the soft jaw:

It is recommended to use a scraper that is about 1/2 inch wide with an end that is 90 degrees to the side of the scraper. It will cut on both sides and on the end. Recommended bevel angle is about 70 degrees.

When scraping nylon, the tool rest must be as close to the work as possible and you must always use a light touch.

Run your lathe at a speed between 1700 and 2000 rpm for best cutting.

You must take extra care when machining the Jaws so that you do not cut so deep as to hit the screw heads.

NOVA CHUCK INSERT/ADAPTORS

Teknatool uses an easy and inexpensive insert/adaptor system on all its NOVA chucks (apart from the obsolete Compac chuck)

The insert has different lathe spindle thread sizes internally, and simply screws into the back of your Nova chucks.  Once the insert is in place, you can then put your chuck onto your lathe.

Features and Benefits:

  • Adapts any NOVA chuck to almost any lathe spindle at low cost.
  • The insert/adaptor versions of NOVA chucks all use the same insert/adaptor system to ensure maximum adaptability and flexibility for the user.
NOVA CHUCK INSERT/ADAPTORS

HOW DOES THE INSERT SYSTEM WORK? 

NOVA CHUCK INSERT/ADAPTORSThe insert fits into the back of the chuck and onto your lathe headstock spindle. We have the largest range of inserts to fit many different popular lathe models. The inserts are threaded both inside and out. The outside thread is made to fit into the NOVA Chucks. The inside thread comes in a variety of sizes, which one you need will depend on what lathe you have. See the insert thread listing below for more details. If you are not sure what lathe thread you have, see our FAQ on how you can identify this thread

In order to help you find the most suitable adaptor, we provide the following table for you.

The first refers to the list of insert/adaptors that we manufacture.  Check with us if your lathe is not listed, we update our inserts all the time.   The second table refers to the thread sizes which we direct thread into the chuck body - as such, these do not require insert/adaptors.  A directly threaded chuck body cannot be altered to an insert type body or another thread size once threaded, so it pays to be sure that your lathe thread size is not covered by the insert/adaptors first!  

NOVA CHUCK INSERT/ADAPTORSOPTIONAL ACCESSORIES

Insert Spanner. Makes it easy to get inserts off and onto your chuck and lathe. Dual ended, sizes useful for other applications on Nova lathes.

  Insert/Adaptor Listing for Nova chucks

 

Code Description Thread Size Lathe Match (where known)
12NS INSERT 2 M20x2 RH (Metric) Tyme Cub
I3NS INSERT 3 M20x1.5 RH (Metric) Electra Beckum / Multico Sumaro
I6NS INSERT 6 3/4 inch Plain Bore  
I7NS INSERT 7 1 1/8 inch 8 TPI UN(NOT UNC) Oliver
I8NS  INSERT 8 7/8 inch 12 NS LH  
I9NS  INSERT 9  3/4 inch 16 TPI RH with 6mm register  
IANS INSERT A 3/4 inch 4TPI BSP RH Teknatool TL1000 (Pre 1986)
IBNS INSERT B 3/4 inch 4TPI BSP LH Teknatool TL1000 (Pre 1986)
ICNS INSERT C 1 inch 10TPI BSF RH Teknatool TL1000, Woodfast, Durden 
IDNS INSERT D 1 inch 8TPI UNC RH Delta, Rockwell, Golding, General, Teknatool Comet (North America) & Mercury Lathes
IENS INSERT E 1 inch 12TPI UNF RH Myford ML8, Turnstyler
IFNS INSERT F 5/8 inch Plain Bore RH  
IHNS INSERT H 3/4 inch 10TPI BSW RH Rockwell / Homecraft 
IINS INSERT I M24x3 RH (Metric) B Line, Arundel K600/K450
IJNS INSERT J 1 1/8 inch 12 TPI RH Myford Mystro, Masterlathe (NZ)
IKNS INSERT K M18x2.5 RH (Metric) Elu DB 180
ILNS INSERT L 1-1/4 inch 8 TPI RH  Designed for Teknatool 1-1/4 inch thread reversible operation lathes
IMNS INSERT M 1 inch 10TPI BSF LH Teknatool TL1000, Woodfast / Durden
INNS INSERT N Blank.  Can be threaded up to 28mm (1-1/8 inch to match your lathe size Once threaded, this blank adapator cannot be re-threaded. 
IONS INSERT O 1-1/8 inch 7 TPI  BSW RH Morton
IQNS INSERT Q M30x3.5 RH (Metric) Teknatool TL1500/3000/Comet (European and Southern Hemisphere), Woodfast
ISNS INSERT S  5/8 inch Plain Bore  Designed Specifically for Shopsmith Pro V, Power Pro Machines. 
ITNS  INSERT T  1inch8 TPI Dual Threaded LH and RH   
IUNS INSERT U 1-1/8inch 12 TPI UNF RH  Taiwanese
IVNS INSERT V 7/8 inch 4 TPI NF RH  
IYNS INSERT Y 1-1/4 inch  8 TPI RH For lathes don't have reverse turning ability.
IWNS INSERT W M25x2 RH (Metric) Tyme Avon ('83 on) and Classic, Tanner SD165; Selbix Springwood; Sorby (some markets); Cotech
IXNS INSERT X  1 inch 8 TPI RH  reversible  Designed specifically for the NOVA Comet II Midi Lathe, features lock for the reverse function. 

 

Models and Accessories
6033 Popular Jaw Assortment Bundle  (Includes JS25N, JS100N, and JSCOLE)
6037 Large Jaw Assortment Bundle    (Includes JS130N, PJSN, and 6017)
6038 Small Jae Assortent Bundle (Includes JS20N, 6026 & 6006)
6040 Large 12 inch Cole Jaw
6039 Cole Jaw Extension  12-15 inch (Can only be used with New 6040 12 inch Cole Jaws)
6027 4 Piece Jaw Set
JSCOLE Cole Jaws (10")
6017 Long Nose Jaws
JS130N 130mm Jumbo Jaws
6006 Mini Cole Jaws
6014 Bowl Jaws 75mm
PJSN PowerGrip Jaws
JSPIN Pin Jaws
JS-SP45 45mm Spigot Jaws
6002 Faceplate Ring 130mm
JS100N 100mm Jaws
JS50N 50mm Jaws
6001 Faceplate Ring 100mm
JS75DT 75mm Step Jaws
JS-SP35 35mm Spigot Jaws
6019 Bowl Jaws 35mm
JS25N 25mm Jaws
6026 Mini Spigot Jaw
6034 Nova Pen Plus Jaws
JS70N 70mm Mini Jaw
6025 Mini Step Jaw
JS20N 20mm Mini Jaw
6030 Cole Jaw Buffer Kit
I2NS Insert Nova M20 x 2 RH
I3NS Inset Nova M20 x 1.5 RH
I6NS Insert Nova 3/4 inch Plain Bore
I7NS Insert Nova 1-1/8 inch 8 TPI UNC RH
I8NS Insert Nova 7/8 inch 12 TPI UN LH
I9NS Insert Nova 3/4 inch 16 TPI UNF RH
IANS Insert Nova 3/4 inch 14 TPI RH
IBNS Insert Nova 3/4 inch 14 TPI LH
ICNS insert Nova 1 inch 10 TPI RH
IDNS Insert Nova 1 inch  8 TPI RH
IENS Insert Nova 1 inch 12 TPI RH
IHNS Insert Nova 3/4 inch 10 TPI BSW
IINS Inset Nova M24 x 3 RH
IJNS Insert Nova 1-1/8 inch 12 TPI RH
IKNS Insert Nova M18 x 2.5 RH
ILNS Insert Nova 1-1/4 inch  8 TPI UNS
IMNS Insert Nova 1 inch 10 TPI LH
INNS Insert Nova Blank
IONS Insert Nova 1-1/8 inch 7 TPI RH
IQMS Insert Nova M30 x 3.5 RH
ISNS Insert Nova SHOPSMITH 5/8 inch Plain Bore
ITNS Insert Nova 1 inch 8 TPI RH & LH
IUNS Insert Nova 1-1/8 inch  12TPI UNF RH
IVNS Insert Nova 7/8 inch 14 TPI RH
IWNS Insert Nova M25 x 2 RH
IXNS Insert Nova 1 inch 8 TPI RH 
IYNS Insert Nova 1-1/4 inch 8 TPI UNS RH

easy wood tools

Lathe Tools, and Chucks

 

6033
POPULAR JAW ASSORTMENT BUNDLE (INCLUDES JS25N, JS100N, & JSCOLE)
Mfg. item #: 6033
TEK6033
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$179.99

97
6037
LARGE JAW ASSORTMENT BUNDLE (INCLUDES JS130N, PJSN, & 6017)
Mfg. item #: 6037
TEK6037
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$199.99

97
6038
SMALL JAW ASSORTMENT BUNDLE (INCLUDES JS20N, 6026, 6006)
Mfg. item #: 6038
TEK6038
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$149.99

97
6040
LARGE 12 COLE JAWS
Mfg. item #: 6040
TEK6040
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$121.99

97
6039
COLE JAW EXTENSION 12-15 (CAN ONLY BE USED WITH NEW 6040 12 COLE JAWS)
Mfg. item #: 6039
TEK6039
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$54.99

97
6027
4 PIECE JAW SET
Mfg. item #: 6027
TEK6027
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$179.99

97
JSCOLE
COLE JAWS
Mfg. item #: JSCOLE
TEKJSCOLE
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$94.99

97
6017
LONG NOSE JAWS
Mfg. item #: 6017
TEK6017
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$83.99

97
JS130N
130MM JUMBO JAWS
Mfg. item #: JS130N
TEKJS130N
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$81.99

97
6006
MINI COLE JAWS
Mfg. item #: 6006
TEK6006
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$81.99

97
6014
BOWL JAWS 75MM
Mfg. item #: 6014
TEK6014
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$84.99

97
PJSN
POWERGRIP JAWS
Mfg. item #: PJSN
TEKPJSN
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$97.99

97
JSPIN
PIN JAWS
Mfg. item #: JSPIN
TEKJSPIN
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$74.99

97
JS-SP45
45MM SPIGOT JAWS
Mfg. item #: JS-SP45
TEKJS-SP45
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$87.99

97
6002
FACEPLATE RING 130MM
Mfg. item #: 6002
TEK6002
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$86.99

97
JS100N
100MM JAWS
Mfg. item #: JS100N
TEKJS100N
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$72.99

97
JS50N
50MM JAWS
Mfg. item #: JS50N
TEKJS50N
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$67.99

97
6001
FACEPLATE RING 100MM
Mfg. item #: 6001
TEK6001
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$54.99

97
JS75DT
75MM STEP JAWS
Mfg. item #: JS75DT
TEKJS75DT
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$81.99

97
JS-SP35
35MM SPIGOT JAWS
Mfg. item #: JS-SP35
TEKJS-SP35
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.41
$77.99

97
6019
BOWL JAWS 35MM
Mfg. item #: 6019
TEK6019
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$56.99

97
JS25N
25MM JAWS
Mfg. item #: JS25N
TEKJS25N
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$67.99

97
6026
MINI SPIGOT JAW
Mfg. item #: 6026
TEK6026
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$55.99

97
6034
NOVA PEN PLUS JAWS
Mfg. item #: 6034
TEK6034
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$54.99

97
JS70N
70MM MINI JAW
Mfg. item #: JS70N
TEKJS70N
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$57.99

97
6025
MINI STEP JAW
Mfg. item #: 6025
TEK6025
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$57.99

97
JS20N
20MM MINI JAW
Mfg. item #: JS20N
TEKJS20N
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$49.99

97
6030
COLE JAW BUFFER KIT
Mfg. item #: 6030
TEK6030
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

97
I2NS
INSERT NOVA M20 X 2 RH
Mfg. item #: I2NS
TEKI2NS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

97
I3NS
INSET NOVA M20 X 1.5 RH
Mfg. item #: I3NS
TEKI3NS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

97
I6NS
INSERT NOVA 3/4 PLAIN BORE
Mfg. item #: I6NS
TEKI6NS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

97
I7NS
INSERT NOVA 1 1/8 8 TPI UNC RH
Mfg. item #: I7NS
TEKI7NS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

97
I8NS
INSERT NOVA 7/8 12 TPI UN LH
Mfg. item #: I8NS
TEKI8NS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

97
I9NS
INSERT NOVA 3/4 16 TPI UNF RH
Mfg. item #: I9NS
TEKI9NS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

97
IANS
INSERT NOVA 3/4 4 TPI RH
Mfg. item #: IANS
TEKIANS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

97
IBNS
INSERT NOVA 3/4 4 TPI LH
Mfg. item #: IBNS
TEKIBNS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

97
ICNS
INSERT NOVA 1 10 TPI RH
Mfg. item #: ICNS
TEKICNS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

97
IDNS
INSERT NOVA 1 8 TPI RH
Mfg. item #: IDNS
TEKIDNS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

97
IENS
INSERT NOVA 1 12 TPI RH
Mfg. item #: IENS
TEKIENS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

97
IHNS
INSERT NOVA 3/4 10 TPI BSW
Mfg. item #: IHNS
TEKIHNS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

97
IINS
INSET NOVA M24 X 3 RH
Mfg. item #: IINS
TEKIINS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

97
IJNS
INSERT NOVA 1 1/8 12 TPI RH
Mfg. item #: IJNS
TEKIJNS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

97
IKNS
INSERT NOVA M18 X 2.5 RH
Mfg. item #: IKNS
TEKIKNS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

97
ILNS
INSERT NOVA 1 1/4 8 TPI UNS
Mfg. item #: ILNS
TEKILNS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

97
IMNS
INSERT NOVA 1 10 TPI LH
Mfg. item #: IMNS
TEKIMNS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

97
INNS
INSERT NOVA BLANK
Mfg. item #: INNS
TEKINNS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

97
IONS
INSERT NOVA 1 1/8 7 TPI RH
Mfg. item #: IONS
TEKIONS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

97
IQMS
INSERT NOVA M30 X 3.5 RH
Mfg. item #: IQMS
TEKIQMS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$28.99

194
ISNS
INSERT NOVA SHOPSMITH 5/8 PLAIN BORE
Mfg. item #: ISNS
TEKISNS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

97
ITNS
INSERT NOVA 1 8 TPI RH & LH
Mfg. item #: ITNS
TEKITNS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

97
IUNS
INSERT NOVA 1 1/8 12TPI UNF RH
Mfg. item #: IUNS
TEKIUNS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

97
IVNS
INSERT NOVA 7/8 14 TPI RH
Mfg. item #: IVNS
TEKIVNS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

97
IWNS
INSERT NOVA M25 X 2 RH
Mfg. item #: IWNS
TEKIWNS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

97
IXNS
INSERT NOVA 1 8 TPI RH W/SET SCREW FOR REV.
Mfg. item #: IXNS
TEKIXNS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

97
IYNS
INSERT NOVA 1 1/4 8 TPI UNS RH
Mfg. item #: IYNS
TEKIYNS
FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.40
$29.99

97
Copyright © 2021 Smith-Hamilton, Inc
0.048 190924 15:47