chat now with southern tool
Technical Sales 1–800–458–3687

Teknatool Nova Galaxi DVR Lathe

Galaxi 16"- 44" Wood Lathe

 
supernova 2 chuck   easy wood tools
The recomended Chuck for this lathe
is a Teknatool SuperNova 2
Click the image above for more infomation
Dont forget your turning tools
Check out or full line of easy wood tools
 

 

The NOVA Galaxi DVR Lathe is the latest lathe from the NOVA stable. This lathe combines the best features of larger lathes - power, capacity and capability with state of the art technology to make your turning more efficient, fun and safer. The DVR Galaxi is the most versatile lathe on the market.

NOVA DVR lathes are the world’s only intelligent woodlathes, combining the best features of larger lathes with state of the art technology allowing you to turn more efficient, safe and fun. The DVR technology allows the lathe to run incredibly smooth with no belts or pulleys to cause the lathe to vibrate. DVR motor is a Smart motor which features adaptive control software that works with the turner to produce optimum turning conditions for your projects.

NOVA DVR Galaxi is an excellent all round lathe featuring the intelligent 2HP (220V)/ 1.75(115V) DVR motor with features such as chisel dig in sensing, favorite speed settings and out of balance work adjustment. The motor offers super smooth operations and torque from a very low speed of 100rpm right up to 5000rpm. This is the first lathe in the NOVA DVR series to have a easy to use dial speed control, making the lathe a perfect solution for a wide variety of projects.

The NOVA DVR Galaxi offers 16 inch swing capacity (expandable to 29 inch capacity outboard with optional outrigger accessory) and 44 inch between centers. The headstock can slide along to the bed to provide a maximum bowl turning capacity from the end of the bed. It includes a forward and reverse feature.

WARRANTY: 2-Years Motor, 5-Years Rest of Lathe
WEIGHT: 251 lbs / 114 kgs including stand and motor

Standard Equipment:

  • Striatech DVR motor and Controller, 2HP (220v) and 1.75HP (115v)
  • Cast Iron Stand
  • 150mm / 6 inch faceplate
  • 300mm  / 12 inch toolrest
  • 2MT live Centre
  • 2MT spur Centre
  • Knock Out Bar
  • Manual and Fastenings

Benifits:

  • Power to Turn and Burn - 2HP (220v) and 1.75 (115v) Direct Drive DVR Motor offers more power/torque than any competitive 16 inch lathe on the market.
  • 5 Favorite Speeds, PLUS NEW Dial in Speed Control - Enables you to pre-programme your most used speeds for faster and more efficient project set ups. The NOVA Galaxi is the first NOVA DVR lathe to feature dial in speed control for faster, more precise speed setting.
  • Solid CAD designed Cast Iron Stand included as standard equipment - Exclusive larger design especially for the NOVA Galaxi, with CAD designed ribbing for structural strength, and a provision for a tool shelf. The NOVA Galaxi 1624-44 Lathe Stand is designed to allow the owner to make custom shelves to add to the stand, if desired. Shelves are not supplied with the stand.
  • Stationary lathe capabilities in a compact workspace. - Incredible power in a compact working space, great for those who need all the workshop space they can get! The swivel head and articulated Outrigger Accessory (additional purchase) means that turning even large bowls, you are still turning in the same compact working envelope. Slide the headstock along the bed for larger projects.
  • 360 degree Swivel head - Position work where you want it, makes your turning more comfortable and saves you workshop space
  • Incredible Speed Range - With a very low speed of 100rpm up to an incredibly high speed of 5,000rpm, the NOVA GALAXI DVR is the perfect solution for a wide variety of projects from small pens to large bowls and platters.
  • Stationary lathe capabilities in a compact workspace - All the power you need in a compact working space, great for those who need all the workshop space they can get! The full swivel head and articulated Outrigger Accessory (SKU 55223) means that even with large bowls (29 inch) you are still turning in the same compact working envelope.
  • High Torque - Delivers high torque from its start speed making it well suited for low speed turning. There is no belt drive - full power output is available at the spindle.
  • Intelligent Drive - The computer analyzes (100s of time per second) both the spindle position and the power required to maintain a given speed. As cutting tool pressure is increased the drive adds more power. Unlike a ‘dumb’ AC or DC where there is no connection between the power supplied and the actual spindle requirements.
  • Up to 50 percent Energy Efficiency - The DVR motor only draws as much power as necessary - this means it is very efficient in its power use and runs very cool, adding years to your motor
  • Low Maintenance - The DVR is a simple motor  the complexity is in the electronics. It has few mechanical parts with no belts, pulleys  the motor and lathe headstock are a fully integrated whole. There are no brushes or magnets and only one set of very robust industrial grade stator windings.
  • Flexibility in Turning - The headstock not only rotates a full 360deg, but you can slide the headstock along the bed, giving you maximum flexibility and capacity in your turning.

Features:

  • Quality Material - Solid Cast Iron throughout
  • Strong 2MT spindles
  • Long reach toolslides, designed to take advantage for the extra capacity the NOVA lathes offer.
  • Quick Action Cam Control - precisely adjust to yor requirements, fast
  • Large range of accessories
  • Comprehensive Warranties
  • Large text option
  • Speed Knob
  • Electronic Auto Braking
  • Electronic Speed Chart
  • Favorite Speed Setting
  • Speed Ramp Profiles
  • idle Motor Detection
  • Upgradeable Firmware
  • Password Protection
Specifications
Bowl turning capacity: 16 inch / 406.4mm inboard
29 inch / 736mm outboard (Using optional outrigger accessory)
Between centers: Standard 44 inch / 1117mm
Power Output: 1.75 HP (115V) / 2 HP (220 V)
Speed range: 100 - 5000 continuous variable speed
Spindle Thread: 1-1/4 inch 8TPI RH
Tailstock: 2MT Hollow (Self-Ejecting)
Swivel head: 360-degree swivel and lock at any position, plus detent locating positions at 0, 22, 4 and 90 degree, and can slide to the end of the bed. High accuracy and easy swivel High accuracy and easy swivel
Indexing: 24 Division
Warranty: 2 Year full replacement on motor, 5 years full replacement on all other parts

 

Models and Accessories
55214 Galaxi 16 in - 44 in Wood Lathe
55224 Black Bed Extension Unit
55223 Black Outrigger Unit
9007 Nova Lathe Swing Away Bed
6002 Faceplate Ring 130mm
6001 Faceplate Ring 100mm
9006 Woodsurfer Bowl Rest w/1 inch Post
TR300/1 Toolrest 300mm 1 inch Shank
5016 Tailstock Chuck Adaptor
6000 Faceplate Ring 50mm
LHB Lathe Hand Wheel
TR100/1 Toolrest 100mm 1 inch Shank
2MTLC 2 MT Simple Live Center
2MTSPUR 2 MT Spur Center
2MTNA Acruline 2 MT Alignment System
23079 Nova Universal Spanner Wrench
SFP80L 3 inch Faceplate (80mm) 1-1/4 inch 8 TPI
27007 Toolrest Collar Ring
5015 Nova Live Center System

 

Woodworking Lathe Chucks, Tools & Duplicators
Teknatool Midi LAthe Chuck easy wood tools vega mini lathe duplicator
TeknaTool Nova Precision Lathe
Chuck,Jaws & Inserts
Easy Lathe Tools & Chucks VEGA PRO Lathe Duplicator

 

#1 BEST SELLING CHUCK
SUPER NOVA 2 CHUCK

This powerful and solid chuck is perfect for use on lathes with up to 20 inch/508mm swing. Brilliant all around geared chuck for a majority of users.

Packed with exciting innovative features and at a fantastically competitive price, the SuperNova 2 is the leading chuck of choice on the market today and reinforces NOVA as the leading brand in the chuck market.

Note: If your lathe is less than 20 inch diameter swing, please have a look at either the Nova Precision Midi or the Nova G3 chucks.  If your lathe has more than 20 inch diameter swing, please have a look at the NOVA Titan Chuck.

supernova 2 chuck

Features standard on all NOVA chucks:

  • Quality Materials.
  • Precision Machining.
  • Common Accessory Jaw Fixing Profile compatible across all NOVA chucks and accessories.
  • High Tech Precision Composite Jaw Slides.
  • Special Woodturning Dovetail Profile on Jaws.
  • Auto Safety Stop Feature. Jaw slides cant protrude past the chuck body.
  • Comprehensive Instructions.
  • Common Insert/Adaptor Fitting compatible across all NOVA chucks.
  • Safe Lock Woodworm Screw. 
  • 2 Years Warranty

Additional SuperNova 2 Features and Benefits

  • supernova 2 backFully sealed composite indexing backing plate.  Made from ultra tough Duracon composite, reinforced with stranded glass fibres for extremely long life in tough conditions. Self lubricating properties. Unique indexing function built into backing plate. Holographic sticker for NOVA authenticity.
  • Powerful Geared Grip with Tuff Lock Technology. Precise, hardened geared action delivers incredible smooth strength. Solid, vibration free.
  • Single Handed Operation. Fast and convenient when mounting your project. More time spent turning and less time spent preparing.  
  • Captured pinion and Ball nose Allen key with large, easy grip handle.  Fast, positive location, easy and comfortable to use. Rotation arrow for easy reference and fast opening and closing action. Unique, tilt away action, means it can be angled back in operation, away from work.
  • Body made from precision machined 1045 High Tensile Steel, with a polished self metal finish to allow for closer tolerances.
  • Able to take all NOVA accessories jaws. (except Titan Power grip, special designed for Titan Chuck.) 

Product Technical Specification

  • Recommended for power workholding on lathes from 350mm (14 inch) to 508mm (20 inch) diameter swing.
  • Up to 736mm/29 inch diameter bowls (using PowerGrip accessory jaws)
  • Up to 482mm/19 inch length spigots (using PowerGrip accessory jaws)  
  • Up to 310mm/12 inch bowl (using standard 50mm accessories jaw)
  • Up to 150mm/6 inch lengh x 10mm/4 inch diameter (using standard 50mm accessories jaw)
  • Full Packaged Weight (Std) 2.5kgs/5.512lbs
  • 24 Division Index built into the backing plate design.

Compatibilityjaws

Capable to take entire NOVA Jaws range. (except Titan Power Grip which specially designed for Titan Chuck)

Only NOVA Chucks give you the same jaw fixing system and same insert/adaptor system across all chuck models.

This means all accessory jaws in the range fit all the chucks in the range, including older chuck models, giving you the ultimate flexibility. In buying a NOVA chuck, you can be confident that whether you want to move up or down the range, any accessories you have invested in will Fit.

Standard Equipment

  • Chuck Body and Jaw Slides (Comes fully assembled)
  • 50mm/2 inch Jaws
  • Safe Lock Woodworm Screw
  • Manual and Fastenings
  • Display/Storage Box
  • T Bar Allen Head Handle with Soft Plastic Grip
  • Insert/Adaptor (some resellers may sell this separately, check with them)

Threads Covered:

  • Std Insert/Adaptor Type Chuck (Code 23055) Requires an insert to fit to lathe. Some resellers may sell this separately, check with them.

  • M33x3.5 Dedicated Threaded Chuck (Code 23062)

 

 

 

Teknatool Wood Turning Lathe Chucks, Jaws and Inserts
Teknatool Wood Turning Lathe Chucks
23055 Supernova2 Chuck Insert Version
IDNS Insert Nova 1 inch  8 TPI RH
ILNS Insert Nova 1 1/4 inch  8 TPI UNS
INNS Insert Nova Blank (Allows you to customize a insert for any lathe)

*** Chucks Require Seperate Insert for Final Insulation and Additional Jaws Sizes are Available ***

Easy Rougher - The Next Step in Woodturning

Ci1 DetailThe Easy Rougher is a carbide cutter woodturning tool that addresses fatigue, safety, and efficiency like no other type of tool on the market. Designed to be kept flat on the tool rest and level to the floor, the Easy Rougher will effortlessly hog away massive amounts of material for any woodturning process without the need for sharpening. The tool design provides support directly beneath the cutting edge transferring the cutting pressure downward allowing the lathe to take the pounding that you would normally suffer through when using a conventional bowl gouge for roughing. No more white knuckling a bowl gouge.

  • Cuts left, right and straight in without changing approach angle
  • Truly deeper cuts up to 1 inch off the diameter in one pass with the Full Size Rougher.
  • Requires very little physical strength or exertion
  • Your feet and hips stay in nearly the same position for the blank roughing process.
  • Very minimal handle bouncing on irregular shaped blanks
  • Reduced kick-back or sucking into work piece
  • Available Chip Deflector keeps most projectiles away from the face and neck
  • No intimidating cutting angles to learn and remember
  • No bevels to ride
  • No fear of a dangerous catch

Easy Finisher - Yet Another Innovation in Woodturning

Ci1 DetailWith another step forward in woodturning innovation, Easy Wood Tools now offers you a tool to take up where the Easy Rougher leaves off. The Easy Finisher has a round carbide cutter perfect for doing the inside work on smaller bowls and for larger coves on spindle work. Our carbide inserts are made in the USA and we are pleased to offer you a tool that is 100 percent made in America.

If you own one of our existing Easy Roughers, you well know by now that we deliver even more than we advertise, as hard as is was for you to believe before your first purchase. I assure you the productivity of this tool will exceed your highest expectations. You just can not predict the possibilities or joy this tool will provide you. In testing the prototypes for this new design, I found myself creating forms that were never even on my list to try because the dangers and complications of existing tools were just not worth the trouble.  Craig Jackson, Founder

Like the other Easy tools, the Easy Finishers are designed to be used with the tool rest set so that when the tool is held level the top of the cutter is on center. Then just keep it level to the floor and flat on the tool rest for all types of cuts... it does not get any easier than that. There are no complicated approach angles, or bevels to ride. The design of this tool allows the Easy Finisher to effortlessly cut from the center of a bowl out to the rim OR from the rim to the center! All without changing any angles whatsoever. You just stand in one spot and cut coming and going until you get to the shape you want.

The Easy Finisher utilizes the same carbide cutter technology as the Easy Rougher that reduces strain and fatigue, improves productivity, and virtually eliminates sharpening. It comes loaded with one round cutter and when it gets dull, you just rotate the cutter for a fresh cut. Please note: The round cutters are not interchangeable with the carbide cutters on the Easy Rougher tool bars.

When the cutter eventually gets dull, just loosen the retaining screw and rotate cutter about 1/4 of a turn, then re-tighten the screw.

We promise this tool will open up a whole new level of design possibilities for your craft and it will exceed your expectations. If not, return for a complete refund.

Replacement carbide cutter number is engraved right on the tool bar.

Available in four sizes - Mini, Mid-Size, Full-Size and Pro. See purchase page for all products, sizes and accessories.

Easy Rougher - The Next Step in Woodturning

Ci1 DetailThe Easy Detailer tools really pick up where other tools leave off and provide another level of woodturning creativity as the unique diamond cutter shape fits in tight places where the cutters on the other tools will just not fit.

These tools were designed for the primary purpose of doing the small intricate work and cutting final details on your projects such as small coves and beads on both spindle and bowl work. They are also very handy for cutting chuck tenons and making inside reverse angle cuts for inside chucking bowls with dovetail jaws. You may find they work well for hogging your green wood projects too.

The Easy Detailers are engineered to cut going straight in employing just the nose of the tool.

The Easy Detailer tools are engineered with a reduced relief angle to the long cuttings edges making the long edges less aggressive when held in contact with the wood as the nose of the tool is cutting. In use, the long edge is intended to perform as a "control surface" and serve to be in contact with the wood just behind the cut; much like a bevel is being rubbed.

For safety reasons, avoid plunging the tool so deep into the work at once to the depth you would have both sides of the cutter in contact with the wood too greatly at the same time. This could cause too much force at once and lead to binding of the tool in the groove.

Each diamond-shaped Easy Detailer cutter is engineered to fit all size Detailer tools in our current product line. When the cutter eventually dulls, just loosen the retaining screw and rotate cutter, then re-tighten the screw.

Replacement carbide cutter number is engraved right on the tool bar.
Available in four sizes - see purchase page for all products, sizes and accessories.

PART NUMBER DESCRIPTION
2200 MID-SIZE EASY ROUGHER
3200 PRO EASY ROUGHER
6300 MID-SIZE EASY FINISHER
3400 PRO EASY FINISHER
7300 MID-SIZE EASY DETAILER
3700 PRO EASY DETAILER

 

 

55214
GALAXI 16- 44 WOOD LATHE
Mfg. item #: 55214
TEK55214
lease to own for as little as:$54 per month!
Free freight on this and other Teknatool items on the same order. FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.43
$2,699.99

37
55224
BLACK BED EXTENSION FOR 24221 16X 24 LATHE - LATHE ACCESSORIES
Mfg. item #: 55224
TEK55224
Free freight on this and other Teknatool items on the same order. FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.43
$279.99

37
55223
BLACK OUTRIGGER UNIT FOR GALAXI & 1624-44 LATHES - LATHE ACCESSORIES
Mfg. item #: 55223
TEK55223
Free freight on this and other Teknatool items on the same order. FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.43
$334.99

37
9007
NOVA LATHE SWING AWAY BED
LIMITED QUANTITY AVAILABLE
Mfg. item #: 9007
TEK9007
Free freight on this and other Teknatool items on the same order. FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.43
$226.99

37
6002
FACEPLATE RING 130MM - LATHES CHUCK ACCESSORIES
Mfg. item #: 6002
TEK6002
Free freight on this and other Teknatool items on the same order. FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.43
$81.99

37
6001
FACEPLATE RING 100MM - LATHES CHUCK ACCESSORIES
Mfg. item #: 6001
TEK6001
Free freight on this and other Teknatool items on the same order. FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.43
$51.99

37
9006
WOODSURFER BOWL REST W/1 POST - LATHE ACCESSORIES
Mfg. item #: 9006
TEK9006
Free freight on this and other Teknatool items on the same order. FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.43
$74.99

37
TR300/1
TOOLREST 300MM 1 SHANK - LATHE ACCESSORIES
Mfg. item #: TR300/1
TEKTR300/1
Free freight on this and other Teknatool items on the same order. FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.43
$59.99

37
5016
TAILSTOCK CHUCK ADAPTOR - LATHE ACCESSORIES
Mfg. item #: 5016
TEK5016
Free freight on this and other Teknatool items on the same order. FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.43
$53.99

37
6000
FACEPLATE RING 50MM - LATHES CHUCK ACCESSORIES
Mfg. item #: 6000
TEK6000
Free freight on this and other Teknatool items on the same order. FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.43
$29.99

37
LHB
LATHE HAND WHEEL - LATHE ACCESSORIES
Mfg. item #: LHB
TEKLHB
Free freight on this and other Teknatool items on the same order. FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.43
$47.99

37
TR100/1
TOOLREST 100MM 1 SHANK - LATHE ACCESSORIES
Mfg. item #: TR100/1
TEKTR100/1
Free freight on this and other Teknatool items on the same order. FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.43
$40.99

37
2MTLC
2 MT SIMPLE LIVE CENTER - LATHE ACCESSORIES
Mfg. item #: 2MTLC
TEK2MTLC
Free freight on this and other Teknatool items on the same order. FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.43
$26.99

37
2MTSPUR
2 MT SPUR CENTER - LATHE ACCESSORIES
Mfg. item #: 2MTSPUR
TEK2MTSPUR
Free freight on this and other Teknatool items on the same order. FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.43
$26.99

37
2MTNA
ACRULINE 2 MT ALIGNMENT SYSTEM - LATHE ACCESSORIES
Mfg. item #: 2MTNA
TEK2MTNA
Free freight on this and other Teknatool items on the same order. FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.43
$28.99

37
23079
NOVA UNIVERSAL SPANNER WRENCH - LATHES CHUCK ACCESSORIES
Mfg. item #: 23079
TEK23079
Free freight on this and other Teknatool items on the same order. FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.43
$28.99

37
SFP80L
3 FACEPLATE (80MM) 1 1/4 8 TPI - LATHE ACCESSORIES
Mfg. item #: SFP80L
TEKSFP80L
Free freight on this and other Teknatool items on the same order. FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.43
$27.99

37
27007
TOOLREST COLLAR RING - LATHE ACCESSORIES
Mfg. item #: 27007
TEK27007
Free freight on this and other Teknatool items on the same order. FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.43
$23.99

37
5015
NOVA LIVE CENTER SYSTEM - LATHE ACCESSORIES
Mfg. item #: 5015
TEK5015
Free freight on this and other Teknatool items on the same order. FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.43
$91.99

37
23055
SUPERNOVA2 CHUCK INSERT VERSION
REQUIRES THE PURCHASE OF A LATHE INSERT - LATHE CHUCKS
Mfg. item #: 23055
TEK23055
Free freight on this and other Teknatool items on the same order. FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.43
$189.99

37
IDNS
INSERT NOVA 1 8 TPI RH - INSERTS
Mfg. item #: IDNS
TEKIDNS
Free freight on this and other Teknatool items on the same order. FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.43
$26.99

37   2
ILNS
INSERT NOVA 1 1/4 8 TPI UNS - INSERTS
Mfg. item #: ILNS
TEKILNS
Free freight on this and other Teknatool items on the same order. FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.43
$26.99

37
INNS
INSERT NOVA BLANK - INSERTS
Mfg. item #: INNS
TEKINNS
Free freight on this and other Teknatool items on the same order. FREE freight on Teknatool orders over $500.00. No additional cost for residential and liftgate service.43
$26.99

37
2200
TURNING TOOL (14 HANLDE / 3/8 X 7 SHAFT) - MID-SIZE EASY ROUGHER ** USE CI2-SQ - GENUINE EWT REPLACEMENT CARBIDE - REPLACEMENT CUTTER OPTION: CI2-R2
Mfg. item #: 2200
EASY2200
$9.95 Shipping & Handling on this item or Free Shipping on Easy Wood orders Over $150.001043
$119.99

275
3200
TURNING TOOL (20 HANLDE / 1/2 X 8 1/2 SHAFT) - PRO EASY ROUGHER ** USE CI1-R4 - GENUINE EWT REPLACEMENT CARBIDE - REPLACEMENT CUTTER OPTIONS: CI1-SQ OR CI1-R2
Mfg. item #: 3200
EASY3200
$9.95 Shipping & Handling on this item or Free Shipping on Easy Wood orders Over $150.001043
$139.98

275
6300
TURNING TOOL (14 HANLDE / 3/8 X 7 SHAFT) - MID-SIZE EASY FINISHER ** USE CI3 - GENUINE EWT REPLACEMENT CARBIDE
Mfg. item #: 6300
EASY6300
$9.95 Shipping & Handling on this item or Free Shipping on Easy Wood orders Over $150.001043
$119.99

275
3400
TURNING TOOL (20 HANLDE / 1/2 X 8 1/2 SHAFT) - PRO EASY FINISHER ** USE CI0 - GENUINE EWT REPLACEMENT CARBIDE
Mfg. item #: 3400
EASY3400
$9.95 Shipping & Handling on this item or Free Shipping on Easy Wood orders Over $150.001043
$139.98

275
7300
TURNING TOOL (14 HANLDE / 3/8 X 7 SHAFT) - MID-SIZE EASY DETAILER ** USE CI4 - GENUINE EWT REPLACEMENT CARBIDE
Mfg. item #: 7300
EASY7300
$9.95 Shipping & Handling on this item or Free Shipping on Easy Wood orders Over $150.001043
$119.99

275
3700
TURNING TOOL (20 HANLDE / 1/2 X 8 1/2 SHAFT) - PRO EASY DETAILER ** USE CI4 - GENUINE EWT REPLACEMENT CARBIDE
Mfg. item #: 3700
EASY3700
$9.95 Shipping & Handling on this item or Free Shipping on Easy Wood orders Over $150.001043
$139.98

275
Copyright © 2018 Smith-Hamilton, Inc
0.020 180604 13:45