Technical Sales 1–800–458–3687

Oliver 12 inch Table Saws

Receive a FREE Amana 12 inch Saw Blade for just 
with the Purchase of Select Table Saws

Promo Code 04-C012048ABW (Shipping charges required on select models)

4045_ProfTablesaw Specsheet.pdf
4045_manual.pdf
4045_reartable_diagram.pdf
4045_partslist.pdf
4045_diagram.pdf
4045_52in_rail_sidetable_diagram.pdf
4045_36in_rail_diagram.pdf

The Oliver 4045 12 inch Table Saw has the guts and the finesse to give you great results. Everything on this table saw is bigger, beefier, and more user-friendly.  The blade tilts 45 deg to the left, giving you the capacity to make compound miter cuts. Sawing heavy lumber? Under the hood you’ve got plenty of power ready to slice through even the most reluctant of hardwoods. Working with large pieces? Our optional 52 inch rail and extension tables allow you to rip super long or super wide stock with ease. And the cam-locking fence is a snap to adjust. (Shown with optional side and rear tables)

Features:

  • Large precision ground table provides a stable work surface.
  • Cast iron base offers a steady platform.
  • Fully enclosed cabinet and blade dust shroud for better dust management.
  • 1 inch arbor.
  • Wide stance trunnion features a left tilt blade.
  • Poly V-belt drive smoothly transfers power to the blade.
  • Hydraulic assisted blade lift mechanism for easy adjustment.
  • Large chrome hand wheels allow easy adjustments.
  • Includes digital readout of blade tilt.
  • Riving knife splitter for added safety against kick-back.
  • Optimus T-square fence available in 36 or 52 inch capacity.
  • Optional side and rear support tables available.
  • Magnetic controls with emergency off switch.
  • Powerful TEFC motor available in single or three-phase.
  • Miter gauge included
  • Optional 440/460 volt available special order only. Additional cost/parts may apply.

 

Specifications
Model No.Model No. 4045
Stock No. (5HP, 1Ph) 4045.003
Stock No. (5HP, 3Ph) 4045.004
Blade Diameter (in.) 12 inch
Arbor Diameter (in.) 1 inch
Maximum Width of Dado (in.) 13/16 inch
Maximum Depth of Cut
at 90 Degrees
4 inch
Maximum Depth of Cut at 45 Degrees 2-2/3 inch
Maximum Cut to the
Right of Blade
36 inch
Maximum Cut to the Left of Blade 12 inch
Dust Port Diameter 4 inch
Table Dimensions w/Extensions (L x W/in.) 30-3/4 x 48-1/2
Table Height 36 inch
Blade Tilt Left
Arbor Speed 3,450 RPM
Wing Size 33-1/2 x 12 inch
Motor 5HP, 1Ph, 220V Only
7.5HP, 3Ph, 220V/440V
Prewired 220V Additional cost for 440/460/480V may apply
Overall Dimensions (L x W x H/in.) 75 x 45 x 41
Net Weight 625
Gross Weight 720 lbs.

 

12 inch TABLE SAW
4045.003 12 inch Heavy Duty Table Saw 5HP 1Ph w/36 inch Rail
4045.003-A001 12 Inch Hevy Duty Table Saw 5HP 1Ph w/52 inch Rail
4045-003-A001/002 12 inch Heavy Duty Table Saw 5HP 1Ph w/Side Table w/52 inch Rail w/rear Extension Table
4045.004 12 inch Heavy Duty Table Saw 7.5HP 3Ph w/36 inch Rail
4045.004-A001 12 Inch Heavy Duty Table Saw 7.5 HP 3Ph w/52 inch Rail
4045-004-A001/002 12 inch Heavy Duty Table Saw 7.5HP 3Ph w/Side Table w/52 inch Rail w/rear Extension Table
12 inch TABLE SAW OPTIONAL ACCESSORIES
4045.A002 Rear Extension Table 24 x 36 inch
812 Circular Saw Blade Sharpener



 

vega table saw fence

Table Saw Fence

COMPARE PERFORMANCE and PRICE WITH ANY FENCE!
Being able to cut materials safely and precisely on your table saw is essential for fast and accurate Woodworking. Unless saw fences are well designed they make cutting a chore instead of pleasure, resulting in poor quality and inaccu- rate cuts. Most Saw Fence Systems….

  1. Do not lock parallel to saw blade.
  2. Do not have accurate measuring scales.
  3. Have Fence Bars that are too short.
  4. Do not have adequate width ripping capacity.
  5. Require frequent re-alignment.
  6. Lack safety devices.
  7. Are unable to be finely adjusted.

The Vega Saw Fence Systems solve all of these problems (and more!) to assure Accurate and reliable cuts combined with smooth, precise motion.

Product Description

MODEL PRO 26, PRO 40, and PRO 50

The Professional Model features the ruggedness and durability for Commercial production requirement, yet is extremely refined for the serious woodworkers needs and wants. With larger components and greater rigidity, the Professional Model is designed for 10 - 12 inch Saws cutting heavier materials and commercial use. The Vega retrofit Saw Fence System is available with 26, 40 or 50 inch rip capacity to the right of the blade and 10″ to the left, with a standard fence length of 42 inch on models PRO 26, PRO 40, and PRO 50. For saw tables between 34 and 42 inches deep, the PRO 26L, PRO 40L, AND PRO 50L ARE available featuring a 50 inch fence bar.

UTILITY MODEL 26 or 50

Designed for contractors saws, smaller cabinet saws, and 10 inch saws that don’t receive extremely heavy use, the Utility Model Fence is simply a small version of the very successful Professional Model. With all the great features of the Pro Model (fast installation, super precision, micro adjustments and more), the Util- ity Fence will upgrade your saw to a very precise cutting machine at a very rea- sonable price.

The Utility Model Vega Saw Fence System is available with 26 or 50 inch rip capacity to the right of the blade and 8 inch to the left.

FENCE ACCESSORIES

Vega manufactures a number of great accessories for the Professional and Util- ity Model fences making them more convenient, productive and safer to use. All accessories are available for both models except the Leg Set which is not necessary for the Utility 26.

You compare the features!

EASY TO INSTALL

No other Fence can be installed on your saw as easily as The Vega Saw Fence, according to American Woodworker Magazine (Oct.92) “I found the Vega Model 50 the easiest to install of all the fences.”

Vega Saw Fences are designed to use existing bolt holes (no drilling required) of Delta Unisaws and Contractors Saws, Powermatic Model 66, most Sears 10 inch saws and most other saws having fence rail mounting holes 8 -9 inch on either side of the blade. Other saws may require drilling 2 or 4 holes. Little accuracy is needed as the Fence Mounting System allows full adjustment. (Installation may be as little as 15 minutes.) Features which help make this Fence so easy to install include:

  1. Pre-drilled and tapped holes to fit most saws.
  2. Slotted Front Brackets to allow vertical and horizontal adjustments.
  3. Jacking Plates to assist in leveling the Fence Rails
  4. Easy to follow instructions.

ALUMINUM FENCE HEAD

Extruded from 6005 - T6 high strength aluminum, the Vega fence head closely contours the polished chrome front rail providing excellent fit and nearly eliminating side play in the fence during adjustment. In ad- dition, the combination of the polished chrome tube and the aluminum head produces an almost ideal bearing surface for low friction and long life. The fence head simply lifts off the front rail for quick fence removal and installation.

EXCLUSIVE MICRO ADJUSTMENTS!

The Vega Saw Fences are the only Fences with true Micro Adjustment capability. If you require precise adjustment from your tablesaw, this is a necessary feature. The Micro  Adjustment allows you to move the Fence very precisely in either direction, via a threaded rod  thumb nut combination. For the final adjustment of only a few thousandths of an inch, Vega provides a threaded mechanism for final, precise setting.

To operate the Micro Adjust:

  1. Press down on the small knob at the right end of the Fence Head to lock the Micro Adjust Cam.
  2. Release the Main Cam.
  3. Rotate the Thumb Nut under the Fence head to move the Fence very precisely… (one full rotation of the nut is 1/16 inch)
  4. After adjusting is complete, lock the Main Cam.

NO MORE BUMPING…

… and hoping for the best! With other saw fences precise adjustments is achieved using this technique.

MADE OF HIGH QUALITY MATERIALS

Vega has carefully chosen only the highest quality materials to construct their Saw Fences. Three unique precision aluminum extrusions, the highest grade of plating quality tubing and super tough and attractive epoxy coating, combined with meticulous care in fabrication result in a truly superior product.

A. Front Guide Rails
The Front Fence Rail is a precision rolled, plating quality tube with a very thick wall for extreme stiffness. The bar is tapped for attachment of the front mounting brackets, table extension plates, and the Vega leg kit (optional). It is chrome plated and plated and polished to provide an extremely low friction glide path for smooth and easy adjustment of the fence.

B. Rear Guide Rails
The Rear Fence Rail is a 1-1/2 inch square tube predrilled for mounting to the exist- ing holes (in most saws) and tapped to hold the extension table support plates and Vega leg kit (optional). The Rail is epoxy coated for low friction, high durability, and an attractive finish.

C. The Fence Bar
The Vega Fence Bars are aircraft quality aluminum alloy extrusions shaped for extreme stiffness while being relatively lightweight for easy handling. They are very accurate bars with side flatness held to extremely close tolerances, resulting in a very uniform surface to guide material through the saw blade for precision cuts. The Fence Bars have a Black Anodized finish which provides extreme surface hardness and low friction.

D. Mounting Brackets
These extruded aluminum mounts help to make the Vega Saw Fence the easiest and fastest aftermarket saw fence to install. They provide simple and accurate vertical and horizontal adjustment for the front guide rail and simply bolt to the saw table through existing holes (in most saws).

E. Jacking Plates
To further assist in easy and accurate installation, jacking plates (4) are provided at the mounting points of the front and rear rail to make leveling and setting fence clearance easy.

F. Rear Hold Down Bracket
The rear hold down bracket prevents the rear of the fence from raising if the fence issued in conjunction with stock feed systems. It is adjusted to just clear the lower side of the rear guide rail.

Support Plates For Extension Tables
(All Models except Pro 26 and Utility 26) To extend the work surface of your saw, Vega provides four Table Support Plates. These Plates are bolted to the underside of the Front and Rear Fence Rails to support an extension table which can easily construct. In addition, the extension table will strengthen the Saw Fence System.

Vega Fence Models

Model Rip Capacity Right Rip Capacity Left Fence Bar Length Front Rail Dia.
Vega Utility 26 26 8 36 inch 1-3/4 inch
Vega Utility 50 50 8 36 inch 1-3/4 inch
Vega Pro 40 40 10 42 inch 2 inch
Vega Pro 50 50 10 42 inch 2 inch
Vega Pro 40L 40 10 50 inch 2 inch
Vega Pro 50L 50 10 50 inch 2 inch
Models
72024 Utility Saw Fence 26 inch Rip Capacity 36 inch Fence Bar  Still MADE in the USA
72025 Utility Saw Fence 50 inch Rip Capacity 36 inch Fence Bar  Still MADE in the USA
72578 Pro 40 inch Rip Capacity 42 inch Fence Bar  Still MADE in the USA
72580 Pro 50 inch Rip Capacity 42 inch Fence Bar  Still MADE in the USA



 

oliver 0812 Circular blade sharpener

Finally, a sharpener for every home shop that will make your cutting job more efficient and easier at anytime and anywhere. All you need is the 0812 Circular Blade

Sharpener and a hand grinder with our included diamond grinding wheel, and you can save your workshop upkeep and have your blades in prime condition for efficiency and safety assurance.

Easy to use and almost hands free grinding allows you to
configure the sharpener to work with blades from 7.5 to 12 inch in diameter with 5/8 or 1 inch arbor.

Packaging Size

  • NW/GW: 24lbs/26.5lbs
  • 10 x 20 x 18.5 inch
  • 4 inch Angle grinder required for use
    (Not Included)

Features:

  • Sharpens circular saw blades from 7.5 to 12 inch diameter.
  • Portable compact design.
  • Sturdy die casting iron base.
  • 4 inch diamond blade included
  • Suitable for regular blades and carbide tip blades.
  • 2 Year Limited Warranty

Oliver cicular saw blade sharpener
812 Circular Saw Blade Sharpener



 

4045.003
12 HEAVY DUTY TABLE SAW 5HP 1PH W/36 RAIL
Mfg. item #: 4045.003
OLV4045.003
lease to own for as little as:$74 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$3,699.99

70
4045.003-A001
12 HEAVY DUTY TABLE SAW 5HP 1PH W/SIDE TABLE W/52 RAIL
Mfg. item #: 4045.003-A001
OLV4045.003-{00
lease to own for as little as:$76 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$3,799.99

70
4045-003-A001/0
12 HEAVY DUTY TABLE SAW 5HP 1PH W/SIDE TABLE W/52 RAIL W/REAR EXTENSION TABLE ** TABLE SAWS THAT ARE ORDERED WITH A 52 RAIL AND A SIDE TABLE DO NOT COME WITH THE RIGHT CAST EXTENSION WING. - SHIPS LTL FREIGHT 920 LBS
CALL TODAY FOR YOUR BROTHER-IN-LAW DEAL ON THIS OLIVER ITEM
Mfg. item #: 4045-003-A001/0
OLV4045-003-{00
lease to own for as little as:$73 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$3,999.99

170
4045.004
12 HEAVY DUTY TABLE SAW 7.5HP 3PH W/36 RAIL
Mfg. item #: 4045.004
OLV4045.004
lease to own for as little as:$74 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$3,699.99

70
4045.004-A001
12 HEAVY DUTY TABLE SAW 7.5HP 3PH W/SIDE TABLE W/52 RAIL
Mfg. item #: 4045.004-A001
OLV4045.004-{00
lease to own for as little as:$76 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$3,799.99

70
4045-004-A001/0
12 HEAVY DUTY TABLE SAW 7.5HP 3PH W/SIDE TABLE W/52 RAIL W/REAR EXTENSION TABLE ** TABLE SAWS THAT ARE ORDERED WITH A 52 RAIL AND A SIDE TABLE DO NOT COME WITH THE RIGHT CAST EXTENSION WING. - SHIPS LTL FREIGHT 920 LBS
CALL TODAY FOR YOUR BROTHER-IN-LAW DEAL ON THIS OLIVER ITEM
Mfg. item #: 4045-004-A001/0
OLV4045-004-{00
lease to own for as little as:$73 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$3,999.99

170
4045.A002
REAR EXTENSION TABLE 24 X 36
Mfg. item #: 4045.A002
OLV4045.A002
Call for freight quote on this item or we will confirm freight charges before shipping.1
$349.99

70
812
SAW BLADE SHARPENER ** SHIPPING WEIGHT = 20 LBS
Mfg. item #: 812
OLV812
FREE shipping when ordered with a machine from this manufacturer.20
$249.99

855
72024
UTILITY SAW FENCE 26 RIP CAPACITY 36 FENCE BAR ** STILL MADE IN THE USA
Mfg. item #: 72024
VEGA72024
$39.95 Freight on orders from this manufacturer.1021
$299.00

71
72025
UTILITY SAW FENCE 50 RIP CAPACITY 36 FENCE BAR ** STILL MADE IN THE USA
Mfg. item #: 72025
VEGA72025
$39.95 Freight on orders from this manufacturer.1021
$329.00

71
72578
PRO 40 RIP CAPACITY 42 FENCE BAR
Mfg. item #: 72578
VEGA72578
$39.95 Freight on orders from this manufacturer.1021
$369.00

71
72580
PRO 50 RIP CAPACITY 42 FENCE BAR
Mfg. item #: 72580
VEGA72580
$39.95 Freight on orders from this manufacturer.1021
$349.00

71
Copyright © 2021 Smith-Hamilton, Inc
0.012 210506 09:14