Technical Sales 1–800–458–3687

Oliver Planers

Oliver 12.5 inch Planer with BYRD Cutterhead 2HP 15A 1Ph Oliver 15 inch Planer with Helical Cutterhead 3HP 1Ph Oliver 20 inch Planer with Helical Cutterhead 5HP 1Ph Oliver 22 inch Planer with 4 Knife HSS Straight Cutterhead 7.5HP 1Ph
12.5 inch Planer with BYRD Cutterhead 2HP 15A 1Ph 15 inch Planer with Helical Cutterhead 3HP 1Ph 20 inch Planer with Helical Cutterhead 5HP 1Ph 22 inch Planer with 4 Knife HSS Straight Cutterhead 7.5HP 1Ph
Oliver 22 inch Planer with 4 Knife HSS Straight Cutterhead 10HP 3Ph Oliver 22 inch Planer with Byrd Shelix Cutterhead 7.5HP 1Ph Oliver 22 inch Planer with Byrd Shelix Cutterhead 10HP 3Ph Oliver 25 inch Planer with 4 Knife HSS Straight Cutterhead 10HP 1Ph
22 inch Planer with 4 Knife HSS Straight Cutterhead 10HP 3Ph 22 inch Planer with Byrd Shelix Cutterhead 7.5HP 1Ph 22 inch Planer with Byrd Shelix Cutterhead 10HP 3Ph 25 inch Planer with 4 Knife HSS Straight Cutterhead 10HP 1Ph
Oliver 25 inch Planer with 4 Knife HSS Straight Cutterhead 15HP 3Ph Oliver 25 inch Planer with Byrd Shelix Cutterhead 10HP 1Ph Oliver 25 inch Planer with Byrd Shelix Cutterhead 15HP 3Ph  
25 inch Planer with 4 Knife HSS Straight Cutterhead 15HP 3Ph 25 inch Planer with Byrd Shelix Cutterhead 10HP 1Ph 25 inch Planer with Byrd Shelix Cutterhead 15HP 3Ph  

 

Models
12.5 inch Thickness Planer
10044.201 12.5 inch Planer with BYRD Cutterhead 2HP 15A 1Ph
15 inch Planer
10014.201 15 inch Planer with Helical Cutterhead 3HP 1Ph
20 inch Planer
4430.201 20 inch Planer with Helical Cutterhead 5HP 1Ph
22 inch Planer
4455.001 22 inch Planer with 4 Knife HSS Straight Cutterhead 7.5HP 1Ph
4455.002 22 inch Planer with 4 Knife HSS Straight Cutterhead 10HP 3Ph
4455.103B 22 inch Planer with Byrd Shelix Cutterhead 7.5HP 1Ph
4455.104B 22 inch Planer with Byrd Shelix Cutterhead 10HP 3Ph
25 inch Planer
4470.001 25 inch Planer with 4 Knife HSS Straight Cutterhead 10HP 1Ph
4470.002 25 inch Planer with 4 Knife HSS Straight Cutterhead 15HP 3Ph
4470.101B 25 inch Planer with Byrd Shelix Cutterhead 10HP 1Ph
4470.102B 25 inch Planer with Byrd Shelix Cutterhead 15HP 3Ph
PLANER OPTIONAL ACCESSORIES
A-BYRD 10 BYRD Shelix Helical Inserts (pack of 10)
P-BYRD SCREW Screw for Byrd Insert (each)
P-15MM 4S 4 Side Inserts (pack of 10) will not fit BYRD 4225|4235|4265C|4275C|4420|4430|10014
P-30MM TCT 2 Side TCT Helical Inserts (pack of 10)
P-038201-101 Torx Screw (for P-15mm 4S) - Used on 4225|4235|4265C|4275C|4420|4430|10014
4455.A001 22 inch Replacement Straight Knives HSS (4)
4470.A001 25 inch Replacement Straight Knives HSS (4)

 

 12-1/2" Thickness Planer - 10044

 12-1/2 inch Thickness Planer - 10044

ALL THE BELLS AND WHISTLES

Finally a BENCH TOP PLANER you don’t need to double in cost to get what you want -- OLIVER includes a BYRD SHELIX cutterhead and WIXEY digital readout and this is only the start!
 

Features
 

  • Authentic BYRD Shelix cutter head provide smooth cuts
  • 4-sided carbide inserts are indexed for quick changing
  • Wixey WR510S digital readout for quick accurate set-up
  • Powerful 2HP 15Amp 115V motor
  • Magnetic switch features overload protection
  • 4-post design ensures cutter head alignment to table
  • Built-in carriage lock for stability during operation
  • Elevation crank includes an easy to read scale
  • On-board adjustment wrench storage
  • Top thickness gage allows convenient material check
  • 4-depth stops allow easy set-up from 3/4 inch to 5/32 inch
  • Front material removal gauge allows for quicker set-up
  • Fold-up extension wings provide added material support
  • Built-in carry handles for easy portability
  • Blower assists in chip ejection during operation
  • Dust port allows 2-1/2 inch or 4 inch hose hook up
  • CSA listed

 

Specifications
Model Number 10044
CutterHead Byrd Shelix
Ph 1Ph
Stock Number 10044.201
Maximum Stock Width 12-1/2 inch
Maximum Depth of Cut 5/64 inch and 3/64 inch
Maximum Stock Thickness 6 inch
Minimum Stock Thickness 5/32 inch
Minimum Stock Length 5 inch
Dust Port Diameter 2.5 inch or 4 inch
Feed Speeds 26 FPM
Table Size 12-1/2 inch x 10-5/16 inch
Table Size w/Extension Wings 12-1/2 inch x 33-3/16 inch
Cutterhead Diameter 1-7/8 inch
Cutterhead Speed 10,000
Number of Knives 36
Number of Knives Byrd 36
Motor 2HP 15A 115V
Motor 1Ph 2HP 15A 115V
Net Weight 68
Gross Weight 75

 

 15" Planer with Helical Cutterhead - 10014

15 inch Planer with Helical Cutterhead - 10014

  • Unique design allows motor and cutter head to move in unison.
  • Auto-depth lock features twin nitrogen cylinders virtually eliminates snipping.
  • Helical cutter head with premium carbide inserts.
  • 4-sided cutting inserts are indexed and easy to replace.
  • Heavy cast iron construction including extension wings.
  • Table and extensions wings are precision ground for smooth stock feeding.
  • Table is fixed allowing easy use of auxiliary stock support.
  • Wixey digital read out allows precise thickness settings.
  • Large hand wheel and support struts allow easy height adjustment.
  • Four-post design ensures head alignment regardless of stock thickness.
  • Two-speed feed gearbox for better cuts.
  • Oil bath gear lubrication for years of performance.
  • 4 inch port allows excellent dust management.
  • Built-in mobile base allows easy movement in the shop.
  • Magnetic switch for added protection and safety.

 

Specifications
Model Number 10014
Stock No. (3HP, 1Ph) 10014.201
Stock Number 0
Maximum Stock Width 15 inch
Maximum Depth of Cut 1/8 inch
Maximum Stock Thickness 6 inch
Minimum Stock Thickness 3/16 inch
Minimum Stock Length 6 inch
Dust Port Diameter 4 inch
Feed Speeds 16/20 FPM
Bed Rollers 2, Adjustable
Table Size 15 inch x 19-5/8 inch
Table Size w/Extension Wings 15 inch x 47-5/8 inch
Table Height 30-1/8 inch
Cutterhead Diameter 3 inch
Cutterhead Speed 5,000 RPM
Number of Knives 52
Number of Knives (helical) 52
Table Support 4-Column
Motor 3HP, 220V Only (1Ph, 12 Amp)
Motor 1Ph 3HP, 220V Only
Overall Dimensions 28 inch x 47-1/2 inch x 52 inch
Net Weight 401 lbs.
Gross Weight 470 lbs.

 

 20" Planer with Helical Cutterhead - 5HP, 1PH - M-4430

20 inch Planer with Helical Cutterhead - 5HP, 1PH - M-4430

  • Unique design allows motor and cutter head to move in unison.
  • Auto-depth lock features twin nitrogen cylinders virtually eliminates snipping.
  • Helical cutter head with premium carbide inserts.
  • 4-sided cutting inserts are indexed and easy to replace.
  • Heavy cast iron construction including extension wings.
  • Table is precision ground for smooth stock feeding
  • Table is fixed allowing easy use of auxiliary stock support
  • Wixey digital read out allows precise thickness settings
  • Large hand wheel and support struts allow easy height adjustment.
  • Four-post design ensures head alignment regardless of stock thickness.
  • Top mounted roller for easy multiple passes.
  • Two-speed feed gearbox for better cuts.
  • Oil bath gear lubrication for years of performance.
  • 5 inch port allows excellent dust management.
  • Built-in mobile base allows easy movement in the shop.
  • Magnetic switch for added protection and safety.
  • CSA listed.

 

Specifications
Model Number 4430
Overall Dimension 51 inch(L) x 40 inch(W) x 46-1/2 inch(H)
Ph 1Ph
Stock No. (5HP, 1Ph) 4430.201
Stock Number M-4430
Maximum Stock Width 20 inch
Maximum Depth of Cut 1/4 inch (Stock less than 8 inch wide) 1/8 inch(Full Width)
Maximum Stock Thickness 8 inch
Minimum Stock Thickness 1/4 inch
Minimum Stock Length 7 inch
Dust Port Diameter 5 inch
Minimum CFM Required 650 CFM
Feed Speeds 16/20
Bed Rollers 1, Adjustable
Table Size 21 inch x 20 inch
Table Size w/Extension Wings 51 inch x 20 inch
Table Height 29-3/4 inch
Cutterhead Diameter 3-1/4 inch
Cutterhead Speed 3450 RPM
Number of Knives 68
Number of Knives (helical) 68
Footprint 22-1/2 inch (L) x 28-3/4 inch(W)
Footprint - with Table 51 inch(L) x 40 inch(W) x 46-1/2 inch(H)
Motor Included 10 Cutter inserts and compatible Torx screws.
Motor 1Ph 5HP 1Ph 230V (1Ph, 18 Amp)
Overall Dimensions 38-1/4 inch (L) x 32 inch(W) x 51-3/4 inch(H)
Net Weight 546 lbs.
Gross Weight 625 lbs.

 

 22†Planer with 4-Knife HSS Straight Cutterhead - 4455.001 - 7.5HP, 1PH

 22 inch Planer with 4-Knife HSS Straight Cutterhead - 4455.001 - 7.5HP, 1PH

  • Massive cast iron construction throughout.
  • Polished built-in table roller assists movement of rough stock.
  • Segmented infeed roller and sectional chip breaker easily handle rough stock.
  • 2-speed gear box provides the perfect feed rate.
  • Magnetic controls with emergency off switch for safer operation.
  • Digital readout allows precise thickness settings.
  • Hinged access to cutter head and feed rollers for quick set-up.
  • Easy access to motor, drive train, and gearbox assist in maintenance and adjustment.
  • 5 inch dust chute easily handles chip removal.
  • 3 V-belt drive smoothly transfers power to drive train and cutter head.
  • Powerful TEFC motor available in single phase.

 

Specifications
Model Number 4455.001
CutterHead 4 Knife HSS
Ph 1Ph
Stock No. (7.5HP, 1Ph, Straight) 4455.001
Stock Number 0
Maximum Stock Width 22 inch
Maximum Stock Thickness 9 inch
Minimum Stock Thickness 1/8 inch
Minimum Stock Length 10 inch
Dust Port Diameter 5 inch
Minimum CFM Required 900 CFM
Infeed Roller Diameter 3 inch
Outfeed Roller Diameter 3-5/16 inch
Feed Speeds 20 and 30 FPM
Bed Rollers 2, Adjustable
Table Size 23-3/4 inch x 32-1/4 inch
Cutterhead Diameter 3 inch
Cutterhead Speed 5,000 RPM
Number of Knives (straight) 4
Number of Knives Byrd 110 Inserts
Footprint 44 inch L x 22 inch W
Table Support 2-Column
Motor 1Ph 7.5HP, 220V Only (38 Amp)
Overall Dimensions 45 inch W x 32 inch D x 50 inch H
Net Weight 1,340 lbs.
Gross Weight 1,550 lbs.
 22†Planer with 4-Knife HSS Straight Cutterhead - 4455.001 - 10HP, 3PH

 22 inch Planer with 4-Knife HSS Straight Cutterhead - 4455.001 - 10HP, 3PH

  • Massive cast iron construction throughout.
  • Polished built-in table roller assists movement of rough stock.
  • Segmented infeed roller and sectional chip breaker easily handle rough stock.
  • 2-speed gear box provides the perfect feed rate.
  • Magnetic controls with emergency off switch for safer operation.
  • Digital readout allows precise thickness settings.
  • Hinged access to cutter head and feed rollers for quick set-up.
  • Easy access to motor, drive train, and gearbox assist in maintenance and adjustment.
  • 5 inch dust chute easily handles chip removal.
  • 3 V-belt drive smoothly transfers power to drive train and cutter head.
  • Powerful TEFC motor available in three phase.

 

Specifications
Model Number 4455.002
CutterHead 4 Knife HSS
Ph 3Ph
Stock No. (10HP, 3Ph, Straight) 4455.002
Stock Number 0
Maximum Stock Width 22 inch
Maximum Stock Thickness 9 inch
Minimum Stock Thickness 1/8 inch
Minimum Stock Length 10 inch
Dust Port Diameter 5 inch
Minimum CFM Required 900 CFM
Infeed Roller Diameter 3 inch
Outfeed Roller Diameter 3-5/16 inch
Feed Speeds 20 and 30 FPM
Bed Rollers 2, Adjustable
Table Size 23-3/4 inch x 32-1/4 inch
Cutterhead Diameter 3 inch
Cutterhead Speed 5,000 RPM
Number of Knives (straight) 4
Number of Knives Byrd 110 Inserts
Footprint 44 inch L x 22 inch W
Table Support 2-Column
Motor 3Ph 10HP, 240V/440V*, Prewired 220V (26/13 Amp)
Overall Dimensions 45 inch W x 32 inch D x 50 inch H
Net Weight 1,340 lbs.
Gross Weight 1,550 lbs.
 22†Planer with Byrd Shelix Cutterhead - 4455.103B - 7.5HP, 1PH

22 inch Planer with Byrd Shelix Cutterhead - 4455.103B - 7.5HP, 1PH

  • BYRD Shelix carbide inserts are indexed for quick changing.
  • Massive cast iron construction throughout.
  • Polished built-in table roller assists movement of rough stock.
  • Segmented infeed roller and sectional chip breaker easily handle rough stock.
  • 2-speed gear box provides the perfect feed rate.
  • Magnetic controls with emergency off switch for safer operation.
  • Digital readout allows precise thickness settings.
  • Hinged access to cutter head and feed rollers for quick set-up.
  • Easy access to motor, drive train, and gearbox assist in maintenance and adjustment.
  • 5 inch dust chute easily handles chip removal.
  • 3 V-belt drive smoothly transfers power to drive train and cutter head.
  • Powerful TEFC motor available in single phase.

 

Specifications
Model Number 4455.103B
CutterHead Byrd Shelix
Ph 1Ph
Stock No. (7.5HP, 1Ph, Byrd) 4455.103B
Stock Number 0
Maximum Stock Width 22 inch
Maximum Stock Thickness 9 inch
Minimum Stock Thickness 1/8 inch
Minimum Stock Length 10 inch
Dust Port Diameter 5 inch
Minimum CFM Required 900 CFM
Infeed Roller Diameter 3 inch
Outfeed Roller Diameter 3-5/16 inch
Feed Speeds 20 and 30 FPM
Bed Rollers 2, Adjustable
Table Size 23-3/4 inch x 32-1/4 inch
Cutterhead Diameter 3 inch
Cutterhead Speed 5,000 RPM
Number of Knives (straight) 4
Number of Knives Byrd 110 Inserts
Footprint 44 inch L x 22 inch W
Table Support 2-Column
Motor 1Ph 7.5HP, 220V Only (38 Amp)
Overall Dimensions 45 inch W x 32 inch D x 50 inch H
Net Weight 1,340 lbs
Gross Weight 1,550 lbs.
 22†Planer with Byrd Shelix Cutterhead - 4455.104B - 10HP, 3PH

 22 inch Planer with Byrd Shelix Cutterhead - 4455.104B - 10HP, 3PH

  • BYRD Shelix carbide inserts are indexed for quick changing.
  • Massive cast iron construction throughout.
  • Polished built-in table roller assists movement of rough stock.
  • Segmented infeed roller and sectional chip breaker easily handle rough stock.
  • 2-speed gear box provides the perfect feed rate.
  • Magnetic controls with emergency off switch for safer operation.
  • Digital readout allows precise thickness settings.
  • Hinged access to cutter head and feed rollers for quick set-up.
  • Easy access to motor, drive train, and gearbox assist in maintenance and adjustment.
  • 5 inch dust chute easily handles chip removal.
  • 3 V-belt drive smoothly transfers power to drive train and cutter head.
  • Powerful TEFC motor available in three phase.

 

Specifications
Model Number 4455.104B
CutterHead Byrd Shelix
Ph 3Ph
Stock No. (7.5HP, 1Ph, Byrd) 4455.104B
Stock Number 0
Maximum Stock Width 22 inch
Maximum Stock Thickness 9 inch
Minimum Stock Thickness 1/8 inch
Minimum Stock Length 10 inch
Dust Port Diameter 5 inch
Minimum CFM Required 900 CFM
Infeed Roller Diameter 3 inch
Outfeed Roller Diameter 3-5/16 inch
Feed Speeds 20 and 30 FPM
Bed Rollers 2, Adjustable
Table Size 23-3/4 inch x 32-1/4 inch
Cutterhead Diameter 3 inch
Cutterhead Speed 5,000 RPM
Number of Knives (straight) 4
Number of Knives Byrd 110 Inserts
Footprint 44 inch L x 22 inch W
Table Support 2-Column
Motor 3Ph 10HP, 240V/440V*, Prewired 220V (26/13 Amp)
Overall Dimensions 45 inch W x 32 inch D x 50 inch H
Net Weight 1,340 lbs
Gross Weight 1,550 lbs.

 

 25†Planer with 4-Knife HSS Straight Cutterhead - 4470.001 - 10HP, 1PH

 25 inch Planer with 4-Knife HSS Straight Cutterhead - 4470.001 - 10HP, 1PH

  • Massive cast iron construction throughout allows up to a 1/4 inch cut.
  • Polished built-in table roller assists movement of rough stock.
  • Segmented infeed roller and sectional chip breaker easily handle rough stock.
  • Dual outfeed rollers assist with heavy stock.
  • 3-speed gear box provides the perfect feed rate.
  • Magnetic controls with emergency off switch for safer operation.
  • Control panel with digital readout allows precise thickness settings.
  • Power assisted table makes for quick, accurate, adjustments.
  • Hinged access to cutter head and feed rollers for quick set-up.
  • 5 inch dust chute easily handles chip removal.
  • Easy access to motor, drive train, and gearbox assist in maintenance and adjustment.
  • Powerful TEFC motor available in single phase.

 

Specifications
Model Number 4470.001
CutterHead 4 Knife HSS
Stock No. (10HP, 1Ph, Straight) 4470.001
Stock Number 0
Maximum Stock Width 25 inch
Maximum Depth of Cut 1/4 inch for 0 inch – 11-3/4 inch and 1/8 inch for 11-3/4 inch – 25 inch
Maximum Stock Thickness 9-1/4 inch
Minimum Stock Thickness 1/8 inch Manual, 15/64 inch Automatic
Minimum Stock Length 10 inch
Dust Port Diameter 5 inch
Minimum CFM Required 900 CFM
Infeed Roller Diameter 3 inch
Steel Outfeed Roller Diameter 3 inch (x2)
Feed Speeds 20, 25 and 30 FPM
Bed Rollers 2, Adjustable
Table Size 26 inch x 32 inch
Cutterhead Diameter 3-3/8 inch
Cutterhead Speed 4,800 RPM
Number of Knives (straight) 4
Footprint 47-1/2 inch L x 21 inch W
Table Support 2-Column
Motor 1Ph 10HP, 240V Only (43 Amp)
Overall Dimensions 46 inchL x 23 inchW x 56 inchH
Net Weight 1,732 lbs.
Gross Weight 1,850 lbs.
 25†Planer with 4-Knife HSS Straight Cutterhead - 4470.002 - 15HP, 3PH

 25 inch Planer with 4-Knife HSS Straight Cutterhead - 4470.002 - 15HP, 3PH

  • Massive cast iron construction throughout allows up to a 1/4 inch cut.
  • Polished built-in table roller assists movement of rough stock.
  • Segmented infeed roller and sectional chip breaker easily handle rough stock.
  • Dual outfeed rollers assist with heavy stock.
  • 3-speed gear box provides the perfect feed rate.
  • Magnetic controls with emergency off switch for safer operation.
  • Control panel with digital readout allows precise thickness settings.
  • Power assisted table makes for quick, accurate, adjustments.
  • Hinged access to cutter head and feed rollers for quick set-up.
  • 5 inch dust chute easily handles chip removal.
  • Easy access to motor, drive train, and gearbox assist in maintenance and adjustment.
  • Powerful TEFC motor available in three phase.

 

Specifications
Model Number 4470.002
CutterHead 4 Knife HSS
Ph 3Ph
Stock No. (15HP, 3Ph, Straight) 4470.002
Stock Number 0
Maximum Stock Width 25 inch
Maximum Depth of Cut 1/4 inch for 0 inch – 11-3/4 inch and 1/8 inch for 11-3/4 inch – 25 inch
Maximum Stock Thickness 9-1/4 inch
Minimum Stock Thickness 1/8 inch Manual, 15/64 inch Automatic
Minimum Stock Length 10 inch
Dust Port Diameter 5 inch
Minimum CFM Required 900 CFM
Infeed Roller Diameter 3 inch
Steel Outfeed Roller Diameter 3 inch (x2)
Feed Speeds 20, 25 and 30 FPM
Bed Rollers 2, Adjustable
Table Size 26 inch x 32 inch
Cutterhead Diameter 3-3/8 inch
Cutterhead Speed 4,800 RPM
Number of Knives (straight) 4
Footprint 47-1/2 inch L x 21 inch W
Table Support 2-Column
Motor 3Ph 15HP, 240V/440V* Prewired 220V (37 Amps)
Overall Dimensions 46 inchL x 23 inchW x 56 inchH
Net Weight 1,732 lbs.
Gross Weight 1,850 lbs.
 25†Planer with Byrd Shelix Cutterhead - 4470.101B - 10HP, 1PH

 25 inch Planer with Byrd Shelix Cutterhead - 4470.101B - 10HP, 1PH

  • Helical carbide inserts are indexed for quick changing.
  • Massive cast iron construction throughout allows up to a 1/4 inch cut.
  • Polished built-in table roller assists movement of rough stock.
  • Segmented infeed roller and sectional chip breaker easily handle rough stock.
  • Dual outfeed rollers assist with heavy stock.
  • 3-speed gear box provides the perfect feed rate.
  • Magnetic controls with emergency off switch for safer operation.
  • Control panel with digital readout allows precise thickness settings.
  • Power assisted table makes for quick, accurate, adjustments.
  • Hinged access to cutter head and feed rollers for quick set-up.
  • 5 inch dust chute easily handles chip removal.
  • Easy access to motor, drive train, and gearbox assist in maintenance and adjustment.
  • Powerful TEFC motor available in single phase.

 

Specifications
Model Number 4470.101B
CutterHead Byrd Shelix
Ph 1Ph
Stock No. (10HP, 1Ph, Byrd) 4470.101B
Stock Number 4470B
Maximum Stock Width 25 inch
Maximum Depth of Cut 1/4 inch for 0 inch – 11-3/4 inch and 1/8 inch for 11-3/4 inch – 25 inch
Maximum Stock Thickness 9-1/4 inch
Minimum Stock Thickness 1/8 inch Manual 15/64 inch Automatic
Minimum Stock Length 10 inch
Dust Port Diameter 5 inch
Minimum CFM Required 900 CFM
Infeed Roller Diameter 3 inch
Steel Outfeed Roller Diameter 3 inch (x2)
Feed Speeds 20, 25 and 30 FPM
Bed Rollers 2, Adjustable
Table Size 26 inch x 32 inch
Cutterhead Diameter 3-3/8 inch
Cutterhead Speed 4,800 RPM
Number of Knives Byrd 125
Footprint 47-1/2 inch L x 21 inch W
Table Support 2-Column
Motor 1Ph 10HP, 240V Only (43 Amps)
Overall Dimensions 46 inchL x 23 inchW x 56 inchH
Net Weight 1,732 lbs.
Gross Weight 1,850 lbs
 25†Planer with Byrd Shelix Cutterhead - 4470.102B - 15HP, 3PH

 25 inch Planer with Byrd Shelix Cutterhead - 4470.102B - 15HP, 3PH

  • Helical carbide inserts are indexed for quick changing.
  • Massive cast iron construction throughout allows up to a 1/4 inch cut.
  • Polished built-in table roller assists movement of rough stock.
  • Segmented infeed roller and sectional chip breaker easily handle rough stock.
  • Dual outfeed rollers assist with heavy stock.
  • 3-speed gear box provides the perfect feed rate.
  • Magnetic controls with emergency off switch for safer operation.
  • Control panel with digital readout allows precise thickness settings.
  • Power assisted table makes for quick, accurate, adjustments.
  • Hinged access to cutter head and feed rollers for quick set-up.
  • 5 inch dust chute easily handles chip removal.
  • Easy access to motor, drive train, and gearbox assist in maintenance and adjustment.
  • Powerful TEFC motor available in three phase.

 

Specifications
Model Number 4470.102B
CutterHead Byrd Shelix
Ph 3Ph
Stock No. (15HP, 3Ph, Byrd) 4470.102B
Stock Number 4470B
Maximum Stock Width 25 inch
Maximum Depth of Cut 1/4 inch for 0 inch – 11-3/4 inch and 1/8 inch for 11-3/4 inch – 25 inch
Maximum Stock Thickness 9-1/4 inch
Minimum Stock Thickness 1/8 inch Manual 15/64 inch Automatic
Minimum Stock Length 10 inch
Dust Port Diameter 5 inch
Minimum CFM Required 900 CFM
Infeed Roller Diameter 3 inch
Steel Outfeed Roller Diameter 3 inch (x2)
Feed Speeds 20, 25 and 30 FPM
Bed Rollers 2, Adjustable
Table Size 26 inch x 32 inch
Cutterhead Diameter 3-3/8 inch
Cutterhead Speed 4,800 RPM
Number of Knives Byrd 125
Footprint 47-1/2 inch L x 21 inch W
Table Support 2-Column
Motor 3Ph 15HP, 240V/440V* Prewired 220V (38/19 Amps)
Overall Dimensions 46 inchL x 23 inchW x 56 inchH
Net Weight 1,732 lbs.
Gross Weight 1,850 lbs

 

10044.201
12.5 PLANER WITH BYRD CUTTERHEAD 2HP 15A 1PH
ADD TO CART OR CALL 800-458-3687 X1 FOR YOUR EXCLUSIVE BROTHER-IN-LAW PRICE ON THIS OLIVER ITEM
Mfg. item #: 10044.201
OLV10044.201
Call for freight quote on this item or we will confirm freight charges before shipping.1
$999.99

38
10014.201
15 PLANER WITH HELICAL CUTTERHEAD 3HP 1PH
ADD TO CART OR CALL 800-458-3687 X1 FOR YOUR EXCLUSIVE BROTHER-IN-LAW PRICE ON THIS OLIVER ITEM
Mfg. item #: 10014.201
OLV10014.201
lease to own for as little as:$56 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$3,099.99

38
4430.201
20 PLANER WITH HELICAL CUTTERHEAD 5HP 1PH
SOUTHERN TOOL SPECIAL = FREE SHIPPING, RESIDENTIAL AND/OR LIFTGATE EXTRA
Mfg. item #: 4430.201
OLV4430.201
lease to own for as little as:$86 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.11
$4,299.99

38
4455.001
22" PLANER WITH 4 KNIFE HSS STRAIGHT CUTTERHEAD 7.5HP 1PH
SOUTHERN TOOL SPECIAL = FREE SHIPPING, RESIDENTIAL AND/OR LIFTGATE EXTRA
Mfg. item #: 4455.001
OLV4455.001
lease to own for as little as:$160 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.11
$7,999.99

38
4455.002
22" PLANER WITH 4 KNIFE HSS STRAIGHT CUTTERHEAD 10HP 3PH
SOUTHERN TOOL SPECIAL = FREE SHIPPING, RESIDENTIAL AND/OR LIFTGATE EXTRA
Mfg. item #: 4455.002
OLV4455.002
lease to own for as little as:$160 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.11
$7,999.99

38
4455.103B
22" PLANER WITH BYRD SHELIX CUTTERHEAD 7.5HP 1PH
ADD TO CART OR CALL 800-458-3687 X1 FOR YOUR EXCLUSIVE BROTHER-IN-LAW PRICE ON THIS OLIVER ITEM, ALSO FREE SHIPPING - RESIDENTIAL AND/OR LIFTGATE EXTRA
Mfg. item #: 4455.103B
OLV4455.103B
lease to own for as little as:$198 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.11
$9,999.99

4455.104B
22" PLANER WITH BYRD SHELIX CUTTERHEAD 10HP 3PH
ADD TO CART OR CALL 800-458-3687 X1 FOR YOUR EXCLUSIVE BROTHER-IN-LAW PRICE ON THIS OLIVER ITEM, ALSO FREE SHIPPING - RESIDENTIAL AND/OR LIFTGATE EXTRA
Mfg. item #: 4455.104B
OLV4455.104B
lease to own for as little as:$198 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.11
$9,999.99

38
4470.001
25" PLANER WITH 4 KNIFE HSS STRAIGHT CUTTERHEAD 10HP 1PH
ADD TO CART OR CALL 800-458-3687 X1 FOR YOUR EXCLUSIVE BROTHER-IN-LAW PRICE ON THIS OLIVER ITEM, ALSO FREE SHIPPING - RESIDENTIAL AND/OR LIFTGATE EXTRA
Mfg. item #: 4470.001
OLV4470.001
lease to own for as little as:$256 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.11
$12,999.99

38
4470.002
25" PLANER WITH 4 KNIFE HSS STRAIGHT CUTTERHEAD 15HP 3PH
ADD TO CART OR CALL 800-458-3687 X1 FOR YOUR EXCLUSIVE BROTHER-IN-LAW PRICE ON THIS OLIVER ITEM, ALSO FREE SHIPPING - RESIDENTIAL AND/OR LIFTGATE EXTRA
Mfg. item #: 4470.002
OLV4470.002
lease to own for as little as:$256 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.11
$12,999.99

4470.101B
25" PLANER WITH BYRD SHELIX CUTTERHEAD 10HP 1PH
ADD TO CART OR CALL 800-458-3687 X1 FOR YOUR EXCLUSIVE BROTHER-IN-LAW PRICE ON THIS OLIVER ITEM, ALSO FREE SHIPPING - RESIDENTIAL AND/OR LIFTGATE EXTRA
Mfg. item #: 4470.101B
OLV4470.101B
lease to own for as little as:$293 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.11
$14,999.99

38
4470.102B
25" PLANER WITH BYRD SHELIX CUTTERHEAD 15HP 3PH
ADD TO CART OR CALL 800-458-3687 X1 FOR YOUR EXCLUSIVE BROTHER-IN-LAW PRICE ON THIS OLIVER ITEM, ALSO FREE SHIPPING - RESIDENTIAL AND/OR LIFTGATE EXTRA
Mfg. item #: 4470.102B
OLV4470.102B
lease to own for as little as:$293 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.11
$14,999.99

A-BYRD 10
BYRD SHELIX HELICAL INSERTS (PACK OF 10)
Mfg. item #: A-BYRD 10
OLVA-BYRD 10
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$59.99

38
P-BYRD SCREW
SCREW FOR BYRD INSERT (EACH)
Mfg. item #: P-BYRD SCREW
OLVP-BYRD SCREW
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$1.00

38
P-15MM 4S
4 SIDE INSERTS (PACK OF 10) *WILL NOT FIT BYRD 4225|4235|4265C|4275C|4420|4430|10014
Mfg. item #: P-15MM 4S
OLVP-15MM 4S
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$99.99

38
P-30MM TCT
2 SIDE TCT HELICAL INSERTS (PACK OF 10)
Mfg. item #: P-30MM TCT
OLVP-30MM TCT
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$139.99

38
P-038201-101
TORX SCREW (FOR P-15MM 4S) - USED ON 4225|4235|4265C|4275C|4420|4430|10014
Mfg. item #: P-038201-101
OLVP-038201-101
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$1.00

38
4455.A001
22 REPLACEMENT STRAIGHT KNIVES HSS (4)
Mfg. item #: 4455.A001
OLV4455.A001
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$179.99

4470.A001
25 REPLACEMENT STRAIGHT KNIVES HSS (4)
Mfg. item #: 4470.A001
OLV4470.A001
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$229.99

Copyright © 2024 Smith-Hamilton, Inc
0.068 240227 06:38