Technical Sales 1–800–458–3687

Oliver Shapers

 

Oliver 10047 Shaper Variable Speed Shaper - 10047VS Oliver 4705 Shaper
Oliver 10047 Shaper Oliver 10047VS Variable Speed Shaper Oliver 4705 Shaper

 

Shapers
10047.001 Shaper 3HP 1Ph 
10047.002 Shaper 5HP 1Ph
10047VS.001 Variable Speed Shaper 3HP 1Ph
4705.001 Shaper 5HP 1Ph
4705.002 Shaper 7.5HP 3Ph
Shaper Accessories
10047.A001 1/2 inch Spindle for 4705 and 10047 Shaper
10047.A002 3/4 inch Spindle for 4705 and 10047 Shaper
10047.A003 1 inch Spindle for 10047 Shaper
10047.A006 1-1/4 inch Spindle for 10047 Shaper
4705.A001 1 inch Spindle for 4705 Shaper
4705.A004 1-1/4 inch Spindle for 4705 Shaper
4705.A002 1/4 inch Collet for 4705 and 10047 Shaper
4705.A003 1/2 inch Collet for 4705 and 10047 Shaper

 

Oliver 10047 Shaper

Click here to download manual

Features:

  • Large cast iron table precision ground table provides a solid work surface.
  • Full cabinet stand includes wheel and locks.
  • 1-1/4 inch interchangeable spindle included, other sizes available.
  • Optional router bit collets available.
  • Four spindle speeds for versatility
  • Belt changes are quick and convienent with unique tensioner.
  • Poly V-belt drive for smoother operation.
  • Spindle reverses for more options with each set-up.
  • Four inches of spindle travel allows more set-up options.
  • Starting pin for irregular shapes included.
  • Fence is independent and includes micro adjustments.
  • Adjustable hold downs add to a safer operation.
  • Extra large handwheel for easy and quick height adjustment.
  • Mitre guage included.
  • Magnetic controls for added safety.
  • Powerful TEFC motor in 3HP or 5HP to meet your needs.
Specifications 10047
Model No.
10047
Stock No. (5HP, 1Ph)
10047.001
Stock No. (7.5HP, 3Ph)
10047.002
Spindle Speed (RPM)
4,000 / 6,000 / 8,000 / 10,000
Spindle Diameter (included)
1-1/4 inch
Spindle Travel
4 inch
Spindle Direction
Reversible
Under Nut Capacity
4 inch with 1-1/4 inch spindle
Table Opening
6-1/4 inch
Large Insert Opening
4-5/16 inch
Small Insert Opening
2-1/2 inch
Table Height
34 inch
Table Size
32 x 26 inch
T-Slot Size
3/4 x 3/8 inch
Fence Size (2)
4-13/16 x 16 inch
Dust Port
4 inch
Minimum CFM Required
800
Motor 10047.001
3HP 1Ph 230V Only
Motor 10047.002
5HP 1Ph 230V Only
Net Weight
455 lbs.
Optional Accessories (Additional Cost)
1/2 inch Spindle, 3/4 inch Spindle, 1 inch Spindle, 1/4 inch Collet, 1/2 inch Collet,

 

Variable Speed Shaper - 10047VS

Click here to download manual

Features:

  • Variable Frequency Drive provides 5,000 to 10,000 Spindle RPM.
  • Elevated control panel with DRO, emergency stop, and speed control.
  • DRO measures spindle RPM and spindle height.
  • Large cast iron table is precision ground to provide a solid work surface.
  • Table features pre-drilled and threaded holes for optional power feeder.
  • Full cabinet stand includes wheels and locks.
  • 1-1/4 inch interchangeable spindle included, other optional sizes available.
  • Optional router bit collets available.
  • Poly V-belt drive for smoother operation.
  • Spindle reverses for more options with each set-up.
  • Four inches of spindle travel allows more set-up options.
  • Starting pin for irregular shapes included.
  • Fence is independent and includes micro adjustment.
  • Adjustable hold downs add to a safer operation.
  • Extra large handwheel for easy and quick height adjustment.
  • Miter gauge included.
  • Powerful TEFC motor to meet your needs.
Specifications 10047VS
Model Number 10047VS
Stock No. (3HP, 1Ph) 10047VS.001
Spindle Speeds 5,000 to 10,000 RPM
Spindle Diameter: 1-1/4 inch
Verticle Spindle Travel: 4 inch
Spindle Direction: Reversible
Under Nut Capacity: 4 inch with 1-1/4 inch Spindle
Table Opening: 6-1/4 inch
Large Insert Opening: 4-5/16 inch
Small Insert Opening: 2-1/2 inch
Table Height 34-3/8 inch
Table Size 32 x 26 inch
T-Slot: 3/4 x 3/8 inch
Fence Size (2): 4-13/16 x 16 inch
Dust Port Diameter 4 inch
Minimum CFM: 800
Motor 1Ph 3HP, 220V only (8 Amp)
Net Weight 396 lbs.
Gross Weight 511 lbs.

 

Oliver 4705 Shaper

Click here to download manual

The Oliver 4705 Shaper uses an interchangeable quill assembly capable of handling 3/4 or 1-1/4 inch spindles.  With a 4 inch spindle travel and cutter diameters up to 8 inch no job is out of the question.  A newly designed dovetail system for the spindle height adjustment ensures both accuracy and longevity with minimal maintenance.  With the skilled woodworker in mind, Oliver put a lot of thought into its fence design.  With accurately scaled micro-adjusts for the right and left fences and integral feather board hold downs the operator is sure to be pleased.

Features:

  • Massive cast iron precision ground table provides a solid work surface.
  • Cast iron base provides a steady platform.
  • 3/4 and 1-1/4 inch interchangeable spindles are included for added versatility.
  • Three spindle speeds allow more choices to produce a better finish.
  • Reversing spindle gives more options for each set-up.
  • Innovative dovetail design accurately raises and lowers the spindle.
  • Fence is independent and features micro adjustments for quick set-up.
  • Top mounted control panel includes a digital readout for spindle height.
  • Large hand wheel for quick spindle height adjustment.
  • Magnetic controls with emergency off switch for safer operation.
  • Powerful TEFC motor available in single or three-phase.
  • Includes miter gauge.
  • Optional collet for router bits available special order.
  • Optional 440/460 volt available special order only. Additional cost/parts may apply.
Specifications 4705
Model No. 4705
Stock No. (5HP, 1Ph) 4705.001
Stock No. (7.5HP, 3Ph) 4705.002
Table Dimensions 39-1/4 inch x 31-1/2 inch
Table Height 36-1/2 inch
Vertical Spindle Travel
4 inch
Spindle Direction Reversible
Spindle Speed 5,000, 7,000, 10,000 RPM
Maximum Tool Diameter 7 inch Below Table, 8 inch Above Table
Spindle Diameter 1-1/4 and 3/4 inch Interchangable
Dust Collector Port 4 inch
Minimum CFM Required 800
Motor (1Ph)
5HP, 220V only
Motor (3Ph)
7.5HP, 220/440V, Prewired 220V
Optional 440/460 volt available special order only.
Additional cost/parts may apply.
Shipping Dimensions (L x W x H/in.) 39 x 31 x 45 inch
Net Weight
780 lbs.
Gross Weight (lbs.) 870 lbs

 

10047.001
SHAPER 3HP 1PH
SOUTHERN TOOL SPECIAL = FREE SHIPPING, RESIDENTIAL AND/OR LIFTGATE EXTRA
Mfg. item #: 10047.001
OLV10047.001
lease to own for as little as:$58 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.11
$2,899.99

38
10047.002
SHAPER 5HP 1PH
SOUTHERN TOOL SPECIAL = FREE SHIPPING, RESIDENTIAL AND/OR LIFTGATE EXTRA
Mfg. item #: 10047.002
OLV10047.002
lease to own for as little as:$64 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.11
$3,199.99

38
10047VS.001
VARIABLE SPEED SHAPER 3HP 1PH
SOUTHERN TOOL SPECIAL = FREE SHIPPING, RESIDENTIAL AND/OR LIFTGATE EXTRA
Mfg. item #: 10047VS.001
OLV10047VS.001
lease to own for as little as:$64 per month!
FREE motor freight to commercial address or terminal pickup in lower 48 states. Residential or Export Orders call 800-458-3687.11
$3,199.99

38
4705.001
SHAPER 5HP 1PH
ADD TO CART OR CALL 800-458-3687 X1 FOR YOUR EXCLUSIVE BROTHER-IN-LAW PRICE ON THIS OLIVER ITEM
Mfg. item #: 4705.001
OLV4705.001
lease to own for as little as:$78 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$4,299.99

38
4705.002
SHAPER 7.5HP 3PH
ADD TO CART OR CALL 800-458-3687 X1 FOR YOUR EXCLUSIVE BROTHER-IN-LAW PRICE ON THIS OLIVER ITEM
Mfg. item #: 4705.002
OLV4705.002
lease to own for as little as:$78 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$4,299.99

38
10047.A001
1/2 SPINDLE FOR 4705 & 10047 SHAPER
Mfg. item #: 10047.A001
OLV10047.A001
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$89.99

38
10047.A002
3/4 SPINDLE FOR 4705 & 10047 SHAPER
Mfg. item #: 10047.A002
OLV10047.A002
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$89.99

38
10047.A003
1 SPINDLE FOR 10047 SHAPER
Mfg. item #: 10047.A003
OLV10047.A003
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$94.99

38
10047.A006
1-1/4 SPINDLE FOR 10047 SHAPER
Mfg. item #: 10047.A006
OLV10047.A006
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$99.99

38
4705.A001
1 SPINDLE FOR 4705 SHAPER
Mfg. item #: 4705.A001
OLV4705.A001
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$99.99

38
4705.A004
1-1/4 SPINDLE FOR 4705 SHAPER
Mfg. item #: 4705.A004
OLV4705.A004
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$99.99

38
4705.A002
1/4 COLLET FOR 4705 & 10047 SHAPER
Mfg. item #: 4705.A002
OLV4705.A002
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$69.99

38
4705.A003
1/2 COLLET FOR 4705 & 10047 SHAPER
Mfg. item #: 4705.A003
OLV4705.A003
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
$59.99

38
Copyright © 2024 Smith-Hamilton, Inc
0.010 240226 15:11