4705 Shapers Specsheet
4705 Manual
4705 Shaper Parts List
The Oliver 4705 Shaper uses an interchangeable quill assembly capable of handling 3/4 or 1-1/4 inch spindles. With a 4 inch spindle travel and cutter diameters up to 8 inch no job is out of the question. A newly designed dovetail system for the spindle height adjustment ensures both accuracy and longevity with minimal maintenance. With the skilled woodworker in mind, Oliver put a lot of thought into its fence design. With accurately scaled micro-adjusts for the right and left fences and integral feather board hold downs the operator is sure to be pleased.
Features:
Specifications | |
---|---|
Model No. | 4705 |
Stock No. (5HP, 1Ph) | 4705.001 |
Stock No. (7.5HP, 3Ph) | 4705.002 |
Table Dimensions | 39-1/4 inch x 31-1/2 inch |
Table Height | 36-1/2 inch |
Vertical Spindle Travel
|
4 inch |
Spindle Direction | Reversible |
Spindle Speed | 5,000, 7,000, 10,000 RPM |
Maximum Tool Diameter | 7 inch Below Table, 8 inch Above Table |
Spindle Diameter | 1-1/4 and 3/4 inch Interchangable |
Dust Collector Port | 4 inch |
Minimum CFM Required | 800 |
Motor (1Ph)
|
5HP, 220V only
|
Motor (3Ph)
|
7.5HP, 220/440V, Prewired 220V
Optional 440/460 volt available special order only. Additional cost/parts may apply. |
Shipping Dimensions (L x W x H/in.) | 39 x 31 x 45 inch |
Net Weight
|
780 lbs.
|
Gross Weight (lbs.) | 870 lbs |
CALL TODAY FOR YOUR BROTHER-IN-LAW DEAL ON THIS OLIVER ITEM
CALL TODAY FOR YOUR BROTHER-IN-LAW DEAL ON THIS OLIVER ITEM